[EDGE E430C - WIN7 64Bit] Can't install my WAN (Ericsson H5321)

Hi,
I'am using a Thinkpad E430c.
I'have installed all the drivers shown in this page:
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073272
But Windows doesn't detect my wan adapter (even when i put a sim card)
I've tried to install manually the drivers but windows still not able to start the device.
Please Help me !!
(See pictures below)

Good day and welcome to the community.
Sorry you're having difficulties.
One thing to check... Boot into your BIOS, select the Security tab, select I/O Port Access and verify that the Integrated Camera is Enabled. Note that the screens/labels may be slightly different, though, as I'm looking at screenshots of the E420 BIOS.
Regards.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

  • My note book windows 7 (64bit) can't install this latest version itunes

    my notebook can not install the latest version itunes , it always shows "windows installer sealing problem " .
      Please help advice and thanks

    Could you possibly type out the text of that error message into a reply here, please? (Precisely as it appears ... don't attempt to give an English translation.)

  • Bridge cc 64bit ,can't install Output Module ,help

    hi
    why is so hard to install output module
    i did everything Install Adobe Output Module
    and when i close bridge and restart it asked me if i want to add the output module , i asnwer yes
    i have the outpot workspace ,but when i click on it , nothing ,,,
    i tried to delete the files of the output module , re-load brige cc ,close ->re -install the output module
    nothing i can't have the output module
    why is so hard to let it work ?
    may i ask ?
    do you think reset the preferences could help ?
    in this case, how can i backup them ?
    i run the last version of bridge cc ,photoshop cc 64bit under w8,1 pro 64bit
    thanks

    hi
    after reading around the forum without luck
    i found the solution  at least for windows
    well inside the AOM_Package_Win64  in my case because i installed only bridge 64bit
    there is
    Adobe Output Module
    AdobeOutputModule.workspace
    copy/extract the folder Adobe Output Module -> C:\Program Files\Common Files\Adobe\Bridge CC Extensions
    copy/extract the file AdobeOutputModule.workspace ->  C:\Program Files\Common Files\Adobe\Bridge CC Extensions\Workspaces
    start bridge

  • Win7 x64 can't install iTunes 10.5

    Win7 x64 and havent updated the windows 7 service pack 1
    I tried to find the Microsoft.VC80.CRT and uninstall the win32 version, but still iTunes won't allow me to install.

    Hi
    Every time I try to update iTunes it will not install. I have to uninstall everything from Apple - restart - reinstall etc. iTunes & Quicktime and MS Windows is just not good friends. The old storiy about Apple being so userfriendly and all - it´s crap. iTunes is so crappy - non-logical userinterface - why can´t you just take files and put into folders etc? I really dislike iTunes - and even more when it never want to be updated without all this uninstalling, reeboot, reinstalling. I use 2 hours on updating everytime.
    So Apple - please look into mS Windows 7 64 bit compatibillty - there must be something wrong when so many people are having issues when trying to install updates from Apple.

  • Win7 64bit boot camp install Monitor inf

    Does anyone know where I can find a monitor info file to fix the generic monitor issue in win7 on the new 27" imacs?

    No ideas?

  • No respond on my Win7 64bit ver. after install Adobe Reader

    HI,
    I've installed adobe reader X recently.
    For the 1st time I tried to open a PDF file, below message pop up:--
    I want to select "Accept" but I am not able to kick any button ("Accept", "Reject", "Print", "Save") inside the pop up message.
    I want to close the PDF file but cannot do it as well. Finally I need to close it by Ctrl+Alt+Del "Task manager".
    I have uninstalled the Adobe reader X  & install it again but same problem happened again.
    Please help

    I suggest you to read this page: http://kb2.adobe.com/cps/404/kb404960.html .  Alessio Ganci

  • Win 7 64bit Can't install driver

    I have the latest software and I have a brand new storm2, when I install the software, all is fine. 
    When i connect my phone , it doesn't charge and the software does not reconize it
    In device manager it says "RIM Composite Device"  and says  "The drivers for this device are not installed. (Code 28)
    I have rebooted many times, tried different ports , installed old software and new. What could be the problem? My ports have plenty of power , never had any issue with any other cell phone, or multiple cell phones connected
    I have unplugged everything from usb, doesnt work, it has to be a software problem. ideas?

    papelian wrote:
    i wish there was some way to get RIM to understand how utterly disappointed we are that they do not have a desktop manager version to sync with windows 7 64 bit/office 2010.  i have been a loyal blackberry fan and customer for over 10 years, and i expected better of them.  Especially because they do not seem able to provide a timeframe by when this issue should be resolved. Very very disappointing, RIM.
    Hi and Welcome to the Forums!
    Actually, RIM has released a timeframe...here...and here.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 2013 MBPr and Mavericks: Win7 (Bootcamp) Can't Install

    Anyeone have an issue when booting off of a Win 7 thumb drive, it boots, but once the setup screen for windows appears, the machine freezes. Plugging in a usb mouse doesn't do anything (the mouse doesn't work). Can't tell if its frozen or if the keyboard and mouse don't work.

    Windows 8.1 isn't supported yet.
    At what point are you getting the blue screen? If it is at the point Bootcamp reboots the system try taking out the WIndows USB/disc and rebooting holding the Alt key. When the boot menu shows up plug in the USB and carry on the installation by selecting the USB option

  • HT3986 iMac (24-inch Mid 2007) can i install win7 64 bit on this mac?

    i am using win7 32bit and want to install win 7 64bit. can i install it?

    Here's the link to the BootCamp support page listing which Macs can run 64-Bit versions of Windows 7: http://support.apple.com/kb/HT1846 I don't see your Mac listed, indicating you can only run Windows 7 32-Bit.

  • X200s Win7 64Bit 4GB only 3GB usable

    Hi,
    how do i activate the memory remap functionality in the BIOS of the X200s. I guess there is a bios extension for that, because I can´t find it.
    I am on Win7 64Bit 4GB RAM installed and only 3GB are usable. (which is awful)
    Cheers,
    André

    you can't control memory remapping through the bios, it is all controlled by the software AFAIK.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Can't install driver touchpad on win7 64bit

    Hello , I have a problem when installing the touchpad driver on win7 . I can not install multitouch mouse , but success on win8 .
    I have tried many of win7 but similar results . Please help me . thanks!
    thank

    Hi @HungVo ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Probook 450 g and issues with the mouse drivers.  The Synaptics Driver in Windows 7 comes with mouse drivers. Unless you are using a USB mouse which would use the Plug n Play drivers. Here is a download that might help.
    Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system.
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Can't install from cs6 cd on windows 7 64bit

    -Can't install from cs6 cd-I have a serial number -I've tried the forums I've even tried phone support which no longer exists for cs6,got the correct specs of pc win7 64bit 8gb ram etc.I worked before.
    -I uninstalled cs6 production premium for student/teachers as after effects wasn't burning,writing,making image or dvd folders.
    -This forum said uninstall everything and run cleaner. I did now when I part in cs6 first gives "restart needed before install" done it twice then ignored, then the install go to selection of software,click next and error 15 comes up tried all again then said installation can't complete contact forum and back to the beginning.
    -Then tried downloading creative crowd while I was signed in on my adobe account, download completed but didnt want to install
    -Then went to adobe application manager downloaded, aswell didn't want to install.
    WHAT IS HAPPENING? to simplestaright for support.
    go here, do this, click there.
    Can anyone tell me how to find or get cs6 installed??via download link, new cd something?
    Thanks

    HI.Tried the link above production premium is only available in French and German no English files.
    BUT I got it right.
    MAIN PROBLEM:ENCORE didn't want to burn,write,create folder or image.Not the DVD writer error.
    If you have tried everything else suggested THEN:
    Adobe forum: uninstall and re-install. ONE slight problem not mentioned any uninstalling or format of PC or adobe software.YOU MUST DEACTIVATE the product first.
    1. Deactivate and un-install all cs6
    2. Download and use the adobe cleaner Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 Point 3 and choose OS-Run it .
    3.Clean all
    4.Run disk and system file clean up.Restart PC.
    5.Let system clean run. Once logged in. Run CC cleaner again. BUT NOW select  clean adobe credentials.
    6.Restart again.
    7.Insert your CS6 production premium disc and TADA! It worked for me.
    If this doesn't work go to adobe,sign in,choose a certain product premiere,after effects etc, choose installing or activation, and click contact us. There should be an option of CHAT to us not just the search forum.
    Explain that you can't install from disc and ask to see your license and serial number if it can be deactivated and then try activate again.
    Not the most elegant but efficient for me. I spent 2 days on this searching,phoning, chatting, restarting
    YET I'm still stuck by ENCORE not burning to disc LOL! So actually was all in vain but atleast if you have bad disc and serial number issues this could shed some like.
    Thanks for all who helped

  • Portege Z830: Can't install Win7, complains about missing CD/DVD driver

    Hi!
    I have a brand new Portege Z830 and as usual wanted to start with installing a new installation of Windows 7 x64 (as I don't want the supplied software and can't trust that it is safe anyway). I backed up the entire drive, prepared a bootable USB flashdisk with Windows installation and started it. The flashdisk boots OK, Windows ask me about my preferred language and keyboard, then shows a screen where I can choose between Install, Repair and something else (Recovery Console, I think).
    I click Install, Windows starts the installation program aand as soon as a first dialog appears, it shows an error message which says essentially this (it's a translation of my localized Windows' message): "A required driver for CD/DVD drive is missing. If you use a driver floppy disk, CD, DVD or flashdisk, insert it now." And I can't get over this error message. The strange thing is, there is no reason for Windows to require any extra drivers, as it can (apparently) read the installation flashdisk and it can see the ultrabook's SSD, too (can be verified both in the recovery console and by clicking the Browse button of this dialog). So far I tried:
    1) Four different Windows 7 images (two of them from MSDN AA, two physical, all of which have been successfully used to install the OS before).
    2) Switch SATA mode from AHCI to Compatible.
    3) Two different flashdisks.
    4) All possible combinations of boot order.
    Nothing worked. I even tried e-mailing Toshiba, but all messages come back with "user unknown" (understandable, I had to guess the addresses since Toshiba doesn't seem to provide any official way to contact them - or is hiding it so well I couldn't find it). Does anyone have any idea what I could try next? I rather like the Z830 and would love to use it, but the ability to install my own installation of the OS is essential for me.
    Thanks, Pepak

    > I even tried e-mailing Toshiba...
    Maybe stupid question now but have you tried to contact Microsoft too? If BIOS is OK and if all USB ports are working properly I dont think it is Toshiba related issue. Toshiba offers notebook with original recovery image (WIN7 64BIT HOME PREMIUM) and possibility to create bootable USB with recovery image that can be used anytime you want.
    What you do now is your own OS installation. What Toshiba must do is to offer all important drivers, tools and utilities on drivers download page.
    What else you can try? Try to obtain external USB ODD and try to install WIN7 using Microsoft installation disc. Im pretty sure this will work.

  • HP722c install to win7 64bit

    Can't get HP722C to install on new Win7 Pro 64bit OS. I saw a long post on HP about a "bridge" but it assumed that the driver was installed and just wouldn't work. I can't even get a driver to install. The CD won't work, driver is not on Win7, and HP won't download it from their site. They tell me it's on Win7, but I have done that dance twice and it ain't there! Anybody smarter than me know how to make this 722C work on Win7 64bit? Now tell me simply and slowly, I'm over 65!
    This question was solved.
    View Solution.

    [Please DO NOT post multiple posts on the same subject.  As I composed this message I note you posted three more requests for the same information....]
    There are actually three separate issues that will need to be addressed:
    Most Windows 7 computers do not have parallel ports and the Deskjet 722 only supports a parallel port.  There are USB-parallel converters that can be used, but many of these do not support Windows 7.  Make sure the converter (if you need one) supports Windows 7.  The posts tagged here have models that users have reported success with in Windows 7.  The port you select will depend on the model you have, the port will typically be USB001: or USB002:.
    The driver is delivered through Windows Update.  Lately this has been having an issue with the update failing.  To check this do the following:  click Start, Devices and Printers, Add a Printer, Local Port, LPt1: (for now), Next, click on Windows Update and wait for the list to repopulate.  If you get an error "Windows was unable to get a list..." then see the post here for a workaround.    Once Windows Update has completed and the list is repopulated select HP Deskjet 720, Next, Next, Finish.  (Do not print a test page at this point.)  You can now connect the printer cable, then right click on the Deskjet 720, Printer Properties, Ports and select the proper port.  [I have no way to know what the port will be for your system.  Look for a USBnnn: port or check with the documentation for your converter cable.] Once this has completed and the printer shows up in the Devices and Printers folder you can continue to the next step.
    Next apply the patch available here that resolves this issue of the spooler crashing.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Qosmio F50 - Need to update BIOS in order of installing Win7-64bit

    Dear community,
    I plan to update to Windows 7 64 bit. My notebook is Toshiba Qosmio F50-10M with a preinstalled VISTA32bit.
    Is there a need to update the BIOS prior installing the new OS? I read that there is a BIOS update f?¼r VISTA64bit available but none I discovered for Win7 64bit.
    Can you give a clue?
    I am confident and glad to own such a powerful notebook but this not completed OS named VISTA is driving me nuts increasingly reading all those nice reports concerning the benefits of Windows7!
    Eager to read your welcomed responses
    Yours,
    Starmind

    Thank you for anwering Paolo!
    Do I understand the right way? I shouldn´t change BIOS if I don´t encounter any problems?
    But I should change the BIOS from 32 to 64 bit if I install the 64bit version of Win7? I intend to do so as I plan to use the full memory of my machine (I use VISTA32 at the moment).
    I should change the BIOS prior installing Win7 as I understood as posted earlier?
    Thank your for your kind assistance!

Maybe you are looking for