Edge icon no longer displaying the "E"

After updating to 1.1.2, the Edge icon ceases to display the white, embedded "E".
FYI

ElegantMac,
Not exactly. The icon is documented in the updated User's Guide (Manual) which can be downloaded from:
http://www.apple.com/support/manuals/
The icon indicates GPRS.
However, a little explanation. Almost every GSM tower supports an older technology for data access called GPRS. In the U.S. nearly all AT&T towers have been updated to EDGE which is speed increase to GPRS. However, GPRS can sometimes be picked up at lower signal strengths than EDGE, and some partner networks may only offer GPRS. In the UK O2 was estimating about 30% of their towers would be upgraded to EDGE by the time the iPhone came out.
Some features like Youtube may not be available on GPRS.
Hope this helps,
Nathan C.

Similar Messages

Mail icon no longer displays unread message count

The mail icon in my dock no longer displays the number of unread messages. Is there a fix for this?

You’ve probably either disabled or removed a font that Mail needs to work properly (e.g. Helvetica):
Font Management in Mac OS X Tiger and Panther

Outlook 2010 no longer displays the calendar and my contacts.

After installing icloud, my Outlook 2010 no longer displays the calendar and my contacts, except in the icloud calendar and contacts listing. How do I restore Outlook calendar and contacts?

Thanks Julian for the suggestion. Unfortunately all still checked out and nothing amiss. However, after reinstalling OS 10.6.8 it appears that my calendar items are syncing once again, but not my contacts. I appreciate the suggestion none the less.
This same thing seems to happen each time I've upgraded Office with the associated version of Entourage, and now Outlook. Ah, well..nothing's ever simple. But I am thoroughly enjoying Outlook and the rest of the Office suite.

My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it back up? Recently rented a movie directly through apple tv but can't see the movies section in main menu now.

My apple tv main menu no longer displays the "movies" section, just internet, computers, and settings. Does anyone know why or how to get it to show again? Recently rented a movie directly through apple tv but can't see the "movies" section in main menu now. WiFi and home sharing are working.

Welcome to the Apple Community.
Check the location setting for the iTunes Store is correct.
You might also try restarting the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
If you are still having problems try a restore.

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Clicking on the downward arrow at the right end of the location bar no longer displays the drop-down list of sites visited, bookmarks and addresses typed in location bar

Since I upgraded to Firefox version 3.6.10, clicking on the downward arrow at the right end of the location bar no longer displays the drop-down list of sites visited, bookmarks and addresses typed in location bar. My Tools > Options > privacy setting is to save history, and if I start typing a previously accessed website's address in the location bar, then the full address appears as a drop-down item. But not when I just click at the right end of the bar.

You can try "Reset all user preferences to Firefox defaults" on the [[Safe mode]] start window.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Lock Screen function no longer displays the screensaver

Something is wrong with my Lock Screen function.
It no longer displays the screen saver when activated, but turns off the whole screen instead. The screensavers themselves work fine when activated automatically after the set time.
I've repaired permissions, deleted caches and trashed ~/Preferences/com.apple.screensaver.plist (plus the ByHost ones), but it's still not working.
Is this a known bug? Any ideas?
Thanks in advance!

there is nothing wrong with your lock screen function. it never activated screensaver. it just locks screen. always been that way. if you want to lock screen and run screensaver check the box in securityy preferences to require password to wake from sleep or screensaver. then assign a hot corner to activate screensaver in exposé system preferences and use that.

MP3 icon no longer displays artwork in finder

Yes I know there was an earlier thread with this name but this is a new thread because when I upgraded to iTunes 10.4 the problem came back. When I open a folder of mp3s in Finder old ones have the artwork but new ones do not even though I downloaded the artwork in iTunes. If I copy an mp3 file that has the artwork in the icon and paste it in a new folder in Finder the icon no longer shows the artwork. The artwork appears when I play the songs in iTunes but does not appear in Finder. I can go into an iTunes playlist click Info and click on the Artwork Tab where I have an album cover showing, click on the album cover, click apple-X (cut) then apple-V (paste), then the artwork suddenly appears on the thumbnail in the folder in Finder. Seems to fix it in list view and cover flow view but not in column view. Running OSX 10.68 What gives?

This is really getting frusturating. I manually add all of my tags and album artwork before adding my music to iTunes. Interesting enough songs that I add to iTunes, their album artowork reappears in finder. If I go to Users/MyUser/Music/iTunes/iTunesMedia/Music/Artist/Album, the icons of the songs will show the album artwork and it will show in quicklook. But, if I drag the mp3 to another folder the album artwork is again not reconized. All third-party software still shows album artowork.
I updated iTunes to 10.4 before upgrading to lion. I think that Apple should at least give us the ability to downgrade to a working version of iTunes, as they have had weeks to fix this widespread issue and have negleted to do so. I would hate to reimage my computer just to get album artowrk back.

Ios8 iPhone6 App Store icons no longer displayed

Hello, on my iPhone 6 and iOS 8.1.1 since 01DEC2014 I see the followi problem:
When updating my apps in the App Store I no longer see the app's icon and all related fotos within the updated app.
The app is updated and works fine.
All apps updated before 01DEC2014 are displayed properly in the App Store.
On my iPad running on iOS 8.1.1 everything is fine, too.
any ideas
Thanks
Michael

Problem solved. Reason was the usage of app 'weblock' which is to to be used to block ads.
Once I deactivated weblock everything is fine again.

ZCM 10.3.4 Icons no longer display on Start Menu

Hi,
I am currently developing a ZCM Win7 COE and am creating new Win7 GPOs using the Microsoft Group Policy tools. ZCM bundle icons were displaying on the Star Menu as expected until I enabled the GPO setting to "Hide and disable all items on the desktop". Now the bundle icons no longer show. The agent appears to be running ok and I can see the bundles are still "available" from the agent proper sheets.
Has anyone come accross this problem before and if so how was this resolved.
Thanks in advance,
Mark.

hughesm,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Icons no longer display in grid view in Yosemite

Hello,
All of a sudden, the icons in folders no longer display in Grid view, but only in the other kinds of view list etc.
Please, I need your help since that is the preferred method I use to display my icons
Here is a link to the screenshot of what I see for further reference:
http://monosnap.com/image/jxliJJrL8dvX8cSsLFFlRm899BqYRN
Any help would be more than appreciated! I am desperate!

Right click the Application icon in the Dock.
Select "Grid" or "Automatic" under "View content as" from the menu that pops up.

Windows Explorer no longer displays the LAN computers

Hi
I use Windows 7 SP1 Ultimate 64 bit, I'm in
a local area network (peer to peer), I not do use the homegroup service and I have no
firewall/antivirus activated.
Now, I have a computer that has problems of
resource sharing:
1) When opening Windows Explorer from
this computer, the LAN computers are no longer
displayed. If I access these computers
via \\<Computer-Name>, I see
only their resources but I do not see
their shared folders. How come?
2) All the resources shared
on this machine are no longer accessible to
other computers. How come?
Thanks
Bye
Balubeto

Hi,
This behavior may also be caused by following factors:
•NetBIOS over TCP/IP is not turned on (enabled).
•The Computer Browser service is not started or is turned off.
•Then File and Print Sharing for Microsoft Networks is corrupted.
Please follow these steps to check these factors:
Step 1: Enable NetBIOS over TCP/IP
1.Click Start, click Control Panel, and then click Network and Internet Connections.
2.Right-click Local Area Connection, and then click Properties.
3.Click Internet Protocol version 4 (TCP/IPv4), and then click Properties.
5.Click the General tab, and then click Advanced.
6.Click the WINS tab.
7.Under NetBIOS setting, click Enable NetBIOS over TCP/IP, and then click OK two times.
8.Click Close to close the Local Area Connection Properties dialog box.
9.Close the Network Connections window.
Step 2: Start the Computer Browser service
1.Click Start, type services in Search box, and then click Services.
2.On the right side, right-click Computer Browser, and then click Restart.
3.Close the Service window.
Step 3: Install File and Print Sharing for Microsoft Networks
1.Click Start, click Run, type ncpa.cpl, and then click OK.
2.Right-click Local Area Connection, and then click Properties.
3.Highlight File and Print Sharing for Microsoft Networks, and then click uninstall.
4.Repeat above steps and check on File and Print Sharing for Microsoft Networks to install this item again.
If the issue still persists, please post back the error message when you try to access the shared folder or files.
Kate Li
TechNet Community Support
I tried all your suggestions but all
is remained unchanged and no error is displayed.
Now, what can I do to fix this problem?
Thanks
Bye
Balubeto

Metadata Browse icon does not display the folder selection dialog( CITRIX )

Hi Experts,
After logging into Financal Management Desktop when a user tries to extract Metadata the Browse icon does not open the open files dialog box.I tried the following steps.
1)logged into the HFM in the citrix environment on production , opened the HFM Win 32 client connected to the application, tried to Extract the metadata clicked on the search icon, it doesn't display the windows search dialog box.
2) logged into the HFM in the citrix environment on Test , opened the HFM Win 32 client connected to the application, tried to Extract the metadata clicked on the search icon, it displays the windows search dialog box.
3) Gave the security permissions to the HFM folder as Everyone still the same issue.
4) Gave the security permissions to the HFM folder as Anonymous still the same issue.
NOTE: HFM 9.3.1.1.00 INSTALLED IN THE CITRIX ENVIRONMENT
can some one advise me on this issue.
Thanks in advance.

Hi Experts,
After logging into Financal Management Desktop when a user tries to extract Metadata the Browse icon does not open the open files dialog box.I tried the following steps.
1)logged into the HFM in the citrix environment on production , opened the HFM Win 32 client connected to the application, tried to Extract the metadata clicked on the search icon, it doesn't display the windows search dialog box.
2) logged into the HFM in the citrix environment on Test , opened the HFM Win 32 client connected to the application, tried to Extract the metadata clicked on the search icon, it displays the windows search dialog box.
3) Gave the security permissions to the HFM folder as Everyone still the same issue.
4) Gave the security permissions to the HFM folder as Anonymous still the same issue.
NOTE: HFM 9.3.1.1.00 INSTALLED IN THE CITRIX ENVIRONMENT
can some one advise me on this issue.
Thanks in advance.

Illustrator no longer displays the white channel of a placed DCS/.eps.

I should have spoke up sooner because I thought this would get fixed pretty quickly but I just upgraded to CS6 and it's still broken. I use Photoshop to generate color separations for screen printing. We do simulated spot process which means we print the prodomient colors of the image rather than gambling that CMYK will work. We print white because garments are often any color you can imagine. So I use the DCS.eps format alot. I place this linked in Illustrator. Up untill CS3 this worked fine. I skipped 4, but upgraded to 5. Five doesn't display the white channel. (These files are Multichannel mode, each channel is a Spot channel. saved as dcs/eps) I have not tried output. It may print fine. The thing is I end up with a client perched on my shoulder like a buzzard and if the white parts of the design or the white channel/screen isn't their to support the top/upper colors I look like I don't know what I'm doing, or I left the white out, etc. I've been in both offset printing and screen printing and T&T (trinkets and trash) for a long time. Messing up paper is one thing. Messing up an Under Armor or Nike or you name it garment is a whole different ballgame so they are pretty tense when it comes to what they see. I already have to explain that it looks pixelated and rough because it's an 8 bit preview but will print sharp.
What are the odds of getting this fixed? It worked like a charm for years (Illustrator 4 to CS3)
Any help with this would be appreciated.

Evidently, Illustrator is creating its own preview, rather than using the one embedded in the EPS.
Create a Multichannel file containing several spot color channels. Make the images of the various spot channels overlap each other. Select white as the color for one of the spot channels. Set each channel's Solidity at 100%. Save as DCS2 with 8-bit TIF preview.
Import the DCS2 file into Corel Draw. Select the Place As EPS option, and it displays the dithered 8-bit composite preview embedded in the EPS, and the spot white channel shows.
If you import the very same file into Illustrator, it's as if Illustrator interprets the content of the EPS (i.e.; a stack of grayscale images) and displays its own preview as if Overprint Preview were turned on. In other words, Illustrator's "preview" of the file seems to act as if you had:
1. Saved the DCS2 file as multifile.
3. Imported the individual grayscale separation files.
4. Applied spot color Swatches to them and set each of them to overprint.
5. Turned on Overprint Preview.
Illustrator knows nothing of individual ink opacity. So as Illustrator's Overprint Preview always does, the white image (being set to overprint) disappears. Note that's not the only difference. The other separation images also display as overprinting, so areas of overlap change color, despite their "Solidity" (opacity) having been set to 100% in Photoshop.
Pretty much the same thing occurs if you save as PS CMYK with spot color channels.
If you place the image (either the DCS or the PS) in Illustrator and print separations to the Adobe PDF virtual printer, you will see that the spot white separation does print, and its image overprints the other seps, as it should. The problem is getting a reasonable preview to show your customer. One way to do that is to print a composite PDF from Photoshop and place that into Illustrator, just to serve as a temporary preview for layout purposes.
I'm on Windows these days, so don't know if there are caveats on MacOS regarding "printing" to PDF.
Just more of Adobe's "cross application integration" of these CS bundles.
JET

Using Firefox 4, the URL bar no longer displays the web address for my current web-site so I can't copy and paste links. Plus there's no refresh button.

I upgraded to Firefox 4 and so far I really don't like it, but I still would like to give it a chance. However, the URL address bar no longer shows the current address for websites that I surf into. So it makes sharing pages or emailing links next to impossible. In addition to that, there is no Refresh icon that I can find so I'm stuck just hitting F5 to refresh my page.
Short of downgrading, is there anyway I can change those particular issues?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Edge icon no longer displaying the "E"

Similar Messages

Maybe you are looking for