Edge network dropping

I have had my phone for a few months and it has worked great. I recently completed the 1.1.3 update and now have had the edge network drop twice. I have to power down to get it to be recognized. Has anyone else experiences this issue?

Well firstly I would update to 1.1.4. Secondly, I often find that turning Airplane mode on and then off again re-established EDGE if it's been lost. My guess is that this is a carrier issue rather than the iPhone.

Similar Messages

IPAD2 Edge network getting dropped whenever i turn-off

IPAD2 is latching to my Tata DoCoMo network in India but Edge network is getting dropped whenever i turn-off and it needs a removal & re-insert of the mirco SIM again...how to address this issue?

What have you done to troubleshoot thus far?

IOS 4.0.1 - call drops in 3G network, but not Edge network !?!

Upgraded my iPhone 3GS to iOS 4.0.1 and have had dropped calls ever since. Never had dropped calls before. Messaging, emails and internet are fine, but all calls are dropped, even with 5 bars! The only constant is that I've been on the 3G network when the calls dropped, so I turned it off and have been on the Edge network for a few days without issue!
I have hard-reset my phone at least a dozen times and even restored my phone. I do not have bells & whistles installed.
Is this a traffic issue on the 3G network? I live in Hawaii, where there aren't tall buildings to block my signal.
ugh.

Since upgrading to iOS 4 it seems to me that the signal bars are reversed. In an area where I used to get maximum bars, I now only get 1 or 2. In an area where I never got reception at all (no signal zone) I am suddenly getting 5 bars, but guess what - I can't connect to anything, or send anything from there.
Either the latest upgrade has just sent the aerial dotty, or someone at Apple IT messed up when writing the signal strength algorithm.

Cannot receive calls when using Edge network for data?

Hi,
This afternoon someone was trying to reach me urgently and all her calls to my iPhone went straight into my voicemail. My phone never rang and never showed missed calls.
I spoke to Aaron at Apple, thinking there might be a problem with my phone, and he told me that when the Edge network is in use, then the phone will not ring and calls will be routed straight to voicemail.
Is this really expected behavior? I was not aware of it.
iPhone 8GB

This has nothing to do with EDGE all other phones will notify you and pause the connection. i posted about this 2 days ago but the thread got deleted.
here is a video that proves this, the noise is from the GSM but the user is clearly on the edge network.
http://youtube.com/watch?v=NMm2AY-_TTY
this is from Tier 2 suport at Apple.
Everyone having this issue should call 1-800-MY iPhon. Ask to speak to Tier II support, the person you get may try to help, and may need to give you a case number. You'll probably have to wait a while on hold.
I just spent an hour on the phone with Tier I & II. The tier I guy started by saying that when you use EDGE it will always go to voicemail. I told him, I was on a user forum & some people said they don't have the issue. He then tested it on his phone & experienced the direct to v-mail issue. We talked about how this was a real problem & how both of our nokia phones didn't have this issue (he actually had the E-61 also). He gave me a case number & transferred my to tier II. The tier II guy told me that this was a software issue. That a pop-up needs to be designed into the software to allow the user the option to disconnect the data connection & accept the voice call, or not. I told him that I'd read on a user forum that some users get voice calls while using EDGE. He said that if they are using you tube the call will automatically interrupt & switch out of you tube. We then tested this on my iPhone & it worked (i.e. the call interupted you tube). He said the software currently decides to disconnect data or send calls to voice mail during EDGE transmissions based on what the user is doing. Phone calls take priority over you tube & widgets (stock & weather)but safari and e-mail take priority over phone calls. He said the thought was, it would be more annoying to users to be in the middle of sending an e-mail and having mail disconnected for a phone call, than having the call go to voicemail. The ideal solution is to have a choice (like other phones allow) but right now the iPhone software does not have a pop-up designed allowing the user to accept the call or keep the data connection. (He seemed to be familiar with this on other phones while being tethered to a macbook to use their data connections & getting voice calls during downloads).
He said he was submitting this to the engineering group & said the more people that call tier II about this & submit it as an issue via online feedback, the higher priority it will get to be addressed in the first software update. So if you want to see this fixed start calling and submitting the issue http://www.apple.com/feedback/iphone.html in as much detail as possible (specifically say that other existing phones Nokia S60s etc. have this function).
and here is a thread that is discussing this serious problem. note it is now many pages long.
http://www.howardforums.com/showthread.php?t=1197377

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

Windows 2008 R2, Network drops even after rebuild, Please help to diagnose

Hi there,
I've had an issue for a while now and I have been working through it and I'm getting lost and starting to go around in circles.
I have just rebuild up a Server 2008 R2 x64
Configuration is
Server: HP Prolient ML330 G6 Quad core xeon 24GB ram (between 2-3 Years Old)
HDD: Raid1 500GB
ip: 192.168.1.253
su: 255,255,255.0
gw: 192.168.1.1
dns 1: 192.168.1.253 (Was 127.0.0.1) please read on!!!
dns 2: empty
Roles and SW: AD DC, DNS, DHCP and Exchange Server (in 1 box)
My original issue was network dropping out every few weeks, progressively got worse to being daily. Restarts would fix it, tho would disconnect after hours or a day or 2.
Issues would be that during a network outage, I cannot connect workstations to domain, no network shares. Internet was dead, and a heap of Event ID errors
Server rebuild went well, It's a 2008 R2 setup and it runs basically everything in 1 server 2008 R2.. I know its not ideal but it's what they had setup previously.
So After rebuild I was using it for hours and hours and configuring, adding, cleaning, updating. All was good.
I was restoring of some emails and system was loaded medium to high for a while.
I went home thinking all was good and might connect via VPN and do some work and monitor it all, The vpn disconnected after a few minutes.
I called their office and asked is all normal?
They said network shares and emails have stopped. I confirmed this as the network would do the same thing it was doing before the rebuild.
So I restarted the server and Internet/Network drops within minutes of being restarted. tried many things to solve this..
hours later I installed known hotfixes, updated drivers, and tried so many other things to try and solve this...
I had heaps of Event ID errors before the rebuild, and trying to ping anyone was resulting in General Errors, and cannot ping basically
After the rebuild it has same sorts of event id errors. I had same general errors when trying to ping.
In the end at 2am 2 weeks ago, I finally got it running smoother..
I did 2 things which have made the network last longer then few minutes...
1. Disabled the Network Port 1 and Enabled the 2nd Port. (Both On board FYI)
2. Changed DNS in the TCPIPv4 from 127.0.0.1 to (192.168.1.253 (Servers IP))
Since this change, I no longer get event ID errors.
When network stops working the network icon stays normal.
And network is lasting days rather then hours.
Things I've spoken to others about,
- 127.0.0.1 and changing to 192.168.1.253 these 2 are basically the same both being loopback to server. They both point to itself..
- The fact the problems reappeared after a rebuild points towards hardware
- I think the summer heat might have cooked the NIC :p as same day the server crapped itself my clients home wifi setup also died. The range extender died! weird coincidence
- So I am seriously thinking it cannot be the DNS IP Configuration setting, I know that running all roles on a single server is hard for a server. But I find it hard to believe it was the DNS which caused this error
I have continued to work on this issue through the weeks.,
The following information is newest
28th March,
After 2 days of sweet operation.. IE Just after the switch to 2nd port.
The server's network went down..,
I can ping only 127.0.0.1 or 192.168.1.253 ok
but ping gateway or workstations times out.
Netstat shows heaps of ipv6 and very few ipv4 addresses
I restarted the server, applying computer settings sat there for a while..
dunno if it was coincidence or not but unplugging the Gateway and replugging it made the CTRL-ALT-DEL come up right away.
after boot everything has been ok for 14 hours now...
Now the Network Ports (2 of them are on the server, most likely sharing controller)
Please take a look at my ping/netstat and please make any comments.
----- Ping.txt -----
Microsoft Windows [Version 6.1.7601]
Copyright © 2009 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Users\Administrator>ping 192.168.1.253
Pinging 192.168.1.253 with 32 bytes of data:
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Reply from 192.168.1.253: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.1.253:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Administrator>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Administrator>ping google.com
Ping request could not find host google.com. Please check the name and try again
C:\Users\Administrator>netstat
Active Connections
Proto Local Address Foreign Address State
TCP 192.168.1.125:6008 192.168.1.118:49683 ESTABLISHED
TCP 192.168.1.253:6008 192.168.1.120:55103 ESTABLISHED
TCP 192.168.1.253:6008 192.168.1.121:49703 ESTABLISHED
TCP 192.168.1.253:6674 WORK-SERVER:19928 TIME_WAIT
TCP 192.168.1.253:19928 WORK-SERVER:6674 TIME_WAIT
TCP [::1]:389 WORK-SERVER:6012 ESTABLISHED
TCP [::1]:389 WORK-SERVER:6013 ESTABLISHED
TCP [::1]:389 WORK-SERVER:36939 ESTABLISHED
TCP [::1]:6012 WORK-SERVER:ldap ESTABLISHED
TCP [::1]:6013 WORK-SERVER:ldap ESTABLISHED
TCP [::1]:36939 WORK-SERVER:ldap ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:19932 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:32574 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:35314 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:35353 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:56321 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:135 WORK-SERVER:64583 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6684 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6685 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6686 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6687 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6689 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6692 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6694 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6712 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:6765 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:17256 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:17327 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19074 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19075 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19077 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19896 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:19902 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:24754 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36936 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36944 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:36946 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:41165 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:56317 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:56319 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59239 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59243 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59244 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59245 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59258 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59262 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59263 ESTABLISHED
TCP [fe80::9142:b19d:a6d0:d31d%14]:389 WORK-SERVER:59327
A HEAP MORE IPv6 but msg too long
I have noticed currently using the Cisco Gigabit switch the network will last 24-48 hours.
3th April
I have tested a 10/100 16port netgear and the network lasted for 5+ Days.
8th April
I noticed network and sharing centre icon has no exclaimation mark looked normal.. so on server I tried to open google website.
Nothing....
I pinged loopback. was ok
Ping the modem and not ok.
So I restarted the adsl modem. Within a minute server resumed internet..
I am unsure if the router caused this dropout. And my thinking spans now using a maximum speed of 100mbps it has taken 5 days to drop. WHY is this?
Either the modem is causing this. Or its the server nic running at only 100mbps
Does it make any sence?
Can a nic on server cause a drop only to restart the gateway to make it startup again.
From my post do you think the port on the gateway is flaky? As you said maybe too much for it to handle.
The modem has 4 lan ports.
Would it make sence to connect more than 1 lan cable from switch to modem?
Thankyou
Cheers

Make sure you have the latest ROM bios and proliant support pack.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3948599&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4064%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Install the rom bios, then easiest to boot the HP smartstart to prepare for operating system deployment, then install the complete PSP next.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Is there a way to stop the Edge network from activating? Overseas Travel

I am travelling in Europe and I do not want the EDGE network to be activated. But I can't find a way to turn off the Edge network. At $1 per KB, this is going to get expensive. I am using WiFi when I can, but the rest of the time, it's on Edge and with Yahoo push email, I end up with 50+ KB per day of traffic.
Does anyone have any ideas? When I leave the wifi area, I turn off my email. But there still seems to be traffic on the edge network (under Settings > Usage). I prefer to do my email only in a wifi zone.
Anyone have any ideas?

I agree. I am currently in the UK and am contending with this. i turned off my e-mail as well but I will be contacting AT&T for a credit on all of the data transfer I invouluntarily incurred while here.

No WIFI OR Edge network after 3.0 update on first generation

I'm working with an original 1st generation iPhone.
I updated which seemed to go well (compared to horror stories I heard from my 3G friends earlier this afternoon). After the update I noticed some major issues:
1. I can not connect to WIFI networks
2. I can not even connect to the Edge network (therefore the internet just straight up doesn't work).
3. I can not access voice mail.
4. It cleared all of my text message conversations.
5. It cleared all of my recent calls.
6. It reset my settings in a few of my apps.
I CAN make calls and send/receive texts.
I can live with having to deal with 4, 5, and 6, but not having 1, 2, and 3, is just ridiculous.
Can anyone help?

I also have the original iPhone and I am also in Pittsburgh and my EDGE network is down. I did not get the software update though. Maybe the storms last night caused an issue with AT&T's network. Please let me know if you hear anything on this. Thanks!

Network dropping with WRT54GS

The network drops 3-4 times daily. Got this router, as an upgrade from the B, about 2 months ago.
The only way to get the network back is to unplug all cables, pull the power, let it reset, then do a repair on the Local area Connection.
I am securing it with a WEP key, it has a SSID, other than that if you can help me I can give more information.
It drops for all three computers on the network. The desktop is physically connected, and the two laptops are wirelessly connected.
Please help this extremely frustrating.
Dwayne
EDIT --> it's version 6
Message Edited by dwharmsway on 05-29-200710:16 AM

I'm having the same problem on my end.
This has been a problem with Linksys routers for some years now. First one I had back in 2002/2003 had the same problems and they never were resolved.
It shocks me that they still suffer from this. I have not used routers for the last 3 years and when I decided to get one I went for Linksys because I like their interfaces. I figured they had fixed that problem from back then.
Seems they haven't as I have to unplug my cables at random intervals for the network to work again.
It just dies without any warning, kills the internet connection and the network in general.
Seems I will have to return this junk and get myself another kind of wireless router. I am using version 6 of it btw.
Any suggestions that won't ruin me?
Message Edited by jobs on 05-31-200706:50 AM
Message Edited by jobs on 05-31-200706:50 AM

Usage of Edge Network on Weekends...

Is the usage of the Edge network for e-mail and internet free on the weekends since minutes are unlimited on the weekends?

Technically it is not free, each iPhone plan has a unlimited data plan included in the monthly bill
So each month you pay to have unlimited access to the EDGE network, you not not have to pay anything extra for using any of the widgets, the Mail app or Safari

Speed of EDGE network

Hey, everybody,
I'm curious...is the EDGE network really that slow on the iPhone? Does its connection speed affect the complete rendering of web pages (i.e., are the pages only partially loaded sometimes), or is it just a matter of how long it takes to render those pages?
Come on...how bad is EDGE, really?

EDGE is not anything to tout, for sure. Very similar to dial-up speeds. In areas with weak signals, it could be even longer as the unit has to request a resend bad data packets (as I experienced on my Nokia 9300). One thing to keep in mind with some of these pages that may never come up and freeze. iPhone does have Flash, but does not have Java capabilities. This may be the issue.
As for the future, the 3G is the network to have, but the battery life will be compromised. I am hoping for the UHF spectrum to be the future solution, as this can be used for the broadcast to the phone and the phone can upload via the current Edge network.
By then, the iPhone will be likely priced at $139 and come with a $300 ringtone credit for downloading all the greatest ringtones from Apples future iRingtones website.
Cheers

2504 WLC on edge network for guest wifi

I have a 2504 WLC with a 1042 AP and I have it placed on my edge Cisco 3750 switch.
I have the management interface of the WLC set on my WAN IP 71.x.x.x subnet range, and I have the WLC doing DHCP duties with a DHCP scope of 192.168.X.0. I have my DNS servers set on external DNS servers out on the Internet.
I have two Cisco 3845 Routers on my edge network - one for each ISP with BGP protocol.
Since my native VLAN is 71.x.x.x, I added a sub interface on my main core router and gave it a 192.168.x.1 255.255.255.0 address for the gateway. Also, I added ip prefix-list iBGP seq 10 permit 192.168.x.0/24 le 32 to my main core router. On my secondary ISP router I added
ip prefix-list iBGP seq 10 permit 192.168.X.0/24 le 32, and ip prefix-list OUT seq 10 permit 192.168.x.0/24 statements.
I added VLAN 10 to my edge switch and gave it IP 192.168.x.2 255.255.255.0, and the switchports that my core router and my WLC are connected to the edge switch, are in trunk mode with encapsulation dot1q 10. The switchport on my edge switch that the AP is connected to is in switchport access mode.
I can connect to the wifi with a 192.168.x.x IP address on my laptop, but I cannot get any Internet access.
Is it possible to have the DHCP scope be in a different subnet than my WAN IP subnet, and allow guests to get to the external Internet only? Do I need to put the WLC somewhere internal on my network i.e. the DMZ and then tunnel the traffic out to the Internet with no Internal network access?
Thanks for any help you can provide.

right, and how does a 'normal/current' user access the internet? Somwhere going to your ISP there should be some sort of NAT statement when you send interwebs traffic.
if your ISP is taking care of all of that for you, you probably need to let them know you added the subnet so they can do the NAT.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

I receive Yahoo mail on Edge network but can't reply...

Hi,
Thanks in advance for your help.
As my subject line states, I get all my Yahoo mail from 2 different Yahoo accounts just fine but cannot reply on the edge network. If I have a WiFi signal I can.
The error I get says "Cannot Send Mail" "The connection to the outgoig server "(null)" failed.
Any ideas?

Hello HMoorhouse,
You were correct in attempting to edit the SMTP settings. SMTP is the server that allows outgoing mail. I would recommend deleting the mail account as a whole and restarting.
Once the device has been restarted, got to Settings>Mail, Contacts, and Calandars
When in "Mail, Contacts, and Calandars" hit Add Account.
You will have mutiple options so you want to select "Other".
Now you need your server settings for both the incoming and outgoing mail server.
If you enter this exactly how your provider gives them to you, it should work. Make sure you know if it is pop or imap, the port number, in incoming and outgoing servers, use SSL on/off and use authentication on/off etc.
If you have all the correct settings accoridng to the provider you may want to restore the phone then try again. Restoring the phone will factor out any Apple software issues.
If you ahve questions let me know.
Best Regards,
Jordan Park

Has anyone had a problem connecting to Edge network?

Got my phone yesterday and it worked flawlessly. I drained the battery and charged it over night.
So I wake up today and try to see what the weather is going to be. It says error updating, so Im like w t f? So I try to open a webpage(using edge) and it doesn't load google and the iPhone says "Safari can't open the page because it an't fid the server."
Has anyone had this issue? Could it be the Edge network or my phone its self? I used the WiFi just now and it worked fine but I need edge to be working.
Thanks

When it happens to me a have to do a reset of the iphone and it fixes it. Hold down the top button and the round button on the buttom of the screen together for 10 seconds until the iphone powers off. Next hold down the power buttong for a second or 2 untill you get the apple logo on the screen.
Must be a bug.

Edge Network vs. Wi-Fi

I was in an area today that had a free Wi-Fi hotspot. When I launched Safari I was asked if I wanted to join the network, and I of course said yes, since it's faster than Edge.
However, the Edge network stayed on, and Safari continued to use the Edge network. I checked settings, and it indicated that I was logged onto the Wi-Fi.
Is there anyway to make sure that when you are in an area with Wi-Fi, it uses the Wi-Fi and not the Edge network?
Thanks in advance.

I was in an area today that had a free Wi-Fi hotspot.
When I launched Safari I was asked if I wanted to
join the network, and I of course said yes, since
it's faster than Edge.
However, the Edge network stayed on, and Safari
continued to use the Edge network. I checked
settings, and it indicated that I was logged onto the
Wi-Fi.
Is there anyway to make sure that when you are in an
area with Wi-Fi, it uses the Wi-Fi and not the Edge
network?
Thanks in advance.
I'm having the same problem. I have wifi. Its checked off in the settings. Its says its connected. But I see that the E icon "edge" still remains. It never switches over to wifi.
what should I do?
is there a way, button combinations, that i could do a reboot on the device.
help

Edge network dropping

Similar Messages

Maybe you are looking for