EDGE NOT WORKING AFTER 4.0 UPDATE

I was overjoyed when I upgraded the OS of my Iphone to 4.0 but the joy was short lived as I came to know that the EDGE stopped working after the upgrade. I am using it in India with Airtel as the Service Provider. I spoke to Airtel and they opined that EDGE would not work on IOS 4.0. Even after the upgrade installation IOS 4.0.1, no improvement in result. Can any one help me on this?

Edge works fine in Australia, so I would be surprised if it didn't work in India.
First, Restart you phone.
Hold the Home and Sleep keys till the Swipe to Turn Off is displayed and the follow the instruction.
Once the phone is turned off, turn it back on and wait for your carrier to be connected and see if that works
If still no good then,
Check the following settings.
Settings - General - Network - Set Enable 3G to Off, This will turn on Edge instead.
Also in the same area Settings - General - Network - Set Cellular Date to On.
Now you should have Data over Edge not 3G.
If that doesn't make any difference, you may have to Reset the Network Settings
Settings - General - Reset - Reset Network Settings.
This will also reset any WiFi settings you have, but to prove the problem, you will have to renew any Wifi zones you are using.
If Still no joy, change the phone to Airplane mode
Settings - Airplane Mode to On.
Leave it for a moment until you have lost connection to your carrier, the turn it back on.
If all that fails, you may have to restore the phone to new.
Airtel/Vodaphone (I presume this is the one you are using) advertise themselves as a 2G/3G network, so there is no reason Edge should not be accessible that I know of.

Similar Messages

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Wifi not working after latest iOS update

wif not working after latest iOS update 7.0.4. Any suggestions?

Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
http://support.apple.com/kb/HT4367

HT6154 rear camera on iphone 5 not working after ios 8 update why?

My iPhone 5 rear camera is no longer working after ios 8 update its just black I can see the flash choice the hdr and the timer but other than that it is a black screen

Hi there fjci2003,
You may find the troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

HP G62 touchpad scroll not working after Windows 10 update

Hello, As many, I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix? Best,

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

Touchpad scroll not working after Windows 10 update

Can you help? I am having a problem with my touchpad scroll. It stopped working after upgrade to Windows 10. I have an HP G62 Laptop and the touchpad listed is Synaptics PS-2 port. Can you please provide information on how to fix?

Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I have read your post on the HP Support Forums. I understand that your TouchPad is not working correctly since you upgraded to Windows 10.  I did some research and came up with a couple different documents that may help you with the TouchPad.
1. HP Notebook PCs - Using the TouchPad or ClickPad (Windows 10)). 2. Using and Troubleshooting the TouchPad or ClickPad (Windows 8): You can customize and adjust how you scroll using one finger or two fingers and how the TouchPad or ClickPad responds to gestures near the edge. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product as they become available to HP. There are some drivers available there currently.  Have a great day!

My Verizon app not working after iOS 7 update

I have an iphone 4s. After I upgraded to ios 7, the my verizon app stopped working. Today, the app got an update in the app store to version 3.6.0. I installed the update, but it still does not work. When I run it, it spins the circle dots for a while and comes back with "Error: A communication error has occured [sic]. Please ensure Internet connection and try again." And it has a "Reload App" button, which I press, and it does the same thing. This happens whether I'm on wifi or 3g. Several times I've tried rebooting the phone, deleting and reinstalling the my verizon app, but it still doesn't work. Does anyone else have this problem? How did you solve it? Thanks.

I did the network reset, but that didn't help. FYI if you're thinking of resetting network settings, the only negative side-effect is that the phone forgets all of its wifi networks.
I did a restore from backup via iTunes, and that didn't help either.
I've had a couple other issues with iOS 7, and what I did was reset the firmware via iTunes but I didn't restore from backup. Now My Verizon works. The reason I did this drastic step was because my Safari was messed up in iOS 7 in another way, and restoring from backup didn't help that either, but I had a hunch that getting Safari fixed would fix My Verizon. (I can't know for sure if I was right about that.)
Here's the thing: Apps like My Verizon that really just load web pages use Safari's settings for the web. So I would try this if I were still stuck with My Verizon not working: Go into Safari settings, and clear cookies and history and cache data, and make sure the "Block Cookies" setting is set to either "Never" or "From third parties and advertisers." Then reboot your phone for good measure, and try My Verizon again.

Camera and led light not working after IOS 7 update on iphone 5 help please!!

After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works. i did all the steps but no luck.
So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net.
With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera, they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money. im glad they didnt charge me for the new camera though as it still didnt work.
anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware. i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release. not overly impressed with the whole process.
i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2. anyway will update if i get any further progress.

IPad Mini Retina 4G is not working after iOS 8 update

I have an iPad Mini Retina Cellular, and after the update to iOS 8 4G network data is not working any more. Near the carrier name 4G appears but when i try to access Internet i get this message: Could not activate cellular data network You are not subscribed to a cellular data service. On 3G Internet works fine.
Other problems: Multitask Gestures are not working always, only after i swipe down notifications

Hello WinGoWithBush,
Thanks for using Apple Support Communities.
In order to resolve this issue where your iPad is not charging, I'd like you to please ensure you are using the correct power adapter as depicted in the support article below, as well as making sure the cord and outlet you are using are both functioning.
iPad: Charging the battery
Take care,
Alex H.

Camera is not working after Lumia Cyan update WP8....

Hellooo Sir, I am Kailash Kumar from India (Uttar Pradesh). I have Nokia Lumia 620, I got this from my friend May 2014 and he bought it from Saudi Arbia and now it is out of warrently..
when I got this its front camera was not working But rear(back) works fine with flash, But after some days I Updated it to win8.1 with Preview of Devloper, and after updating my Camera has Stoped working when I click the Camera Button, within a second it comes to Home Screen..... So I Downgrade to Win8.0 OS via Nokia Software Updater and My Camera Start Working again....
Someone Suggest me to wait for official realese of Lumia Cyan with W8.1 OS and I waited for it and In August last My phone shows that a Update is Available and Now Update it again Officialy to Win8.1 with Cyan Update via Wifi, and the Same problem Again Happening My Camera Stopped working again after click the Camera Button, within a second it comes to Home Screen, I tried everything, Soft reset, Hard Reset, Uninstalling Nokia Camera App & Installing Again, Reset Camera Button.... But the problem remain Same, Stil Camera is not working.........
I go for the nearest Customer Care Service, they told me I Updated it via Wifi and they will update it with PC Charges Rupee 450/- But I didn't give my phone to Care.... After a Day I updated it Via PC from NSU 4.2.1 (I think Customer Care will do the Same) But the Problem Remaining Same Camera Stil is not working......
PLEASE HELP ME SOMEONE WITH THIS PROBLEM.. HERE ARE SOME MORE INFO OF MY LUMIA 620:-
1- FIRST IT IS OUT OF COUNTRY (SAUDI ARBIA) AND OUT OF WARRENTY...
2- OS VERSION: - 8.10.12393.890
     FIRMWARE REVISION NO. : 3058.50000.1425.0002
     HARDWARE REVISION NO. : 5.0.2.0
     RADIO SOFTWARE VERSION : 2.0.242037.8
     CHIP SOC VERSION : 82207
I WILL HIGHLY THANKFULL TO YOU.
Moderator's note: The attachments were removed as it contain the phone's IMEI. For security purposes, avoid posting any of your presonal information on public forums like this.

try hard reset and see if it works and let me know if it does. take phone off. press (green call) key, (*) key, (3) key and power button then wait for phone to come on then let go of keys.

Isight camera not working after the last update

After reboot of the last OS update
Isight camera not working...
i've tried photobooth, ichat, skype and it doesn't show up anywhere. in fact, when i go to system profiler, it doesn't show isight under USB connections at all.
just to give you a recap of what i've tried so far:
* restarting (obviously)
* resetting PRAM/SMC (by booting it the way it was specified in the isight troubleshooting thing)
* just shutting down my computer and taking the battery out for several hours
any Help pls
because i mast to use it as soon as possible in a conference

*A few suggestions.........*
Try running repair permissions from your HD and afterwards run +repair disk+ from your software install DVD.
my isight camera is not working-not recognized with photo booth or ichat
To fix your iSight, shut down computer. Reboot in safe mode (press power button and then hold shift key down). After computer boots, restart again. Hopefully, your iSight will start working again.

EDGE NOT WORKING AFTER 4.0 UPDATE

Similar Messages

Maybe you are looking for