EDGE not working?

Okay my EDGE wont let me connect to anything, no mail, no safari, no weather...
the icon indicates connection, and I'm in my house, where i normally have perfect signal that just decided to stop today.
I still can use the phone with ATT fine, just edge I guess isnt responding
tried restarting a couple times
thanks

I've had the same problem in the Miami market. E appears - no connectivity. Sometimes off/on restores, sometimes reset. Is not a constant problem, but is annoying and time-consuming. I have ample power bars and battery showing when this happens, so it would appear to be an AT&T issue. Sporadic.

Similar Messages

  • Lync 2013 /w Edge not working properly (internal/external same domain name and all "external" users"

    Hi,
    I've got some issues with a Lync 2013 setup.
    The config consists of 2 lync servers. One FE and one Edge. All seems to work except audio in meetings and Sip.
    The setup is like this (fake ip's used):
    Front End:
    Internal IP: 172.16.0.10
    External IP: x.x.185.10
    All ports open in Cisco ASA
    internal AD DNS: dialin/lync/meet/lyncdiscover to Front end internal ip. edge/lsedge/sip points to edge internal ip
    EDGE:
    Interal IP: 172.16.0.11 (no gateway configured)
    External IPS: x.x.185.11, x.x.185.12, x.x.185.13
    All external IP's are direct internet facing, no NAT (a firewall is in place).
    All external interfaces are using a wildcard certificate.
    All server are running in a remote data center, so basically no internal users. We all connect to the external interfaces. The Windows domain name (AD) is the same as our External DNS (companyname.com).
    Autodiscover works, we can logon, chat but there is no audio. The audio test failes. Also SIP is not working with a sip trunk.
    External DNS: sip/webconf/av are pointing to their external ip's. sipexternal is a cname to sip. lyncdiscover/lync/dialin/meet all point to the Frond end External ip.
    _sip._tls/_sipfederationtls.tcp/_xmpp-server.tcp all point to the sip.companyname.com ip.
    I just can't figure out what is wrong.

    @PSingh123 I'll try the logs in a minute and get back with the results.
    @PaulB_NZ Thanks for the input. In my opinion the FE does need an external IP. How else will you be able to connect if you are a remote worker?
    The Edge is (asfar as i know) needed for Enterprise voice and Federation with other (external) sip domains. It's not needed for basic (chat/video/whiteboard etc) Lync functionality for both internal and external (remote) users.
    The Edge is to communicate with services/users outside the origanisation.
    I do still think that the basic topology (FE with internal IP and Nat'ed external ip working with an Edge with internal IP and 1 external IP nat'ed to 3 DMZ ip's) is correct in this case.
    I can be wrong and in that case would like to be pointed to the correct configuration.
    75           
    Points
    Top 15
    PSingh123        
    Partner        
    Joined  Jun 2007        
    9
    PSingh123's threads
    Show activity

  • Refine edge not working in cs6 64 bit

    This might be user error, but I'm having difficulty with the Refine Edge  tool.  When I use Quick Selection to highlight a subject, and click on  Refine Edge, I am unable to add or remove part of the selected region  from the mask. I can erase, or draw over, and it shows, until I depress  the mouse, and it goes back to the original selection. I reset my preferences and still not working.  It has worked in the past.  Just stopped working.
    Thanks for your help!

    Anyone can help me ? Thanks

  • EDGE NOT WORKING AFTER 4.0 UPDATE

    I was overjoyed when I upgraded the OS of my Iphone to 4.0 but the joy was short lived as I came to know that the EDGE stopped working after the upgrade. I am using it in India with Airtel as the Service Provider. I spoke to Airtel and they opined that EDGE would not work on IOS 4.0. Even after the upgrade installation IOS 4.0.1, no improvement in result. Can any one help me on this?

    Edge works fine in Australia, so I would be surprised if it didn't work in India.
    First, Restart you phone.
    Hold the Home and Sleep keys till the Swipe to Turn Off is displayed and the follow the instruction.
    Once the phone is turned off, turn it back on and wait for your carrier to be connected and see if that works
    If still no good then,
    Check the following settings.
    Settings - General - Network - Set Enable 3G to Off, This will turn on Edge instead.
    Also in the same area Settings - General - Network - Set Cellular Date to On.
    Now you should have Data over Edge not 3G.
    If that doesn't make any difference, you may have to Reset the Network Settings
    Settings - General - Reset - Reset Network Settings.
    This will also reset any WiFi settings you have, but to prove the problem, you will have to renew any Wifi zones you are using.
    If Still no joy, change the phone to Airplane mode
    Settings - Airplane Mode to On.
    Leave it for a moment until you have lost connection to your carrier, the turn it back on.
    If all that fails, you may have to restore the phone to new.
    Airtel/Vodaphone (I presume this is the one you are using) advertise themselves as a 2G/3G network, so there is no reason Edge should not be accessible that I know of.

  • Refine edge not working PSE 11

    Hi, I'm getting very frustrated because I cannot figure out the refine edge tool in PSE 11. I have watched the tutorial by Bob Gager and I've read other suggested instructions, AND I do every single thing Bob Gager does in his video, but it's just not working for me! When I'm using the refine edge tool, no hair is selected, and if some hair IS selected it leaves a white fog over it. I don't understand why this isn't working. I was sooo excited about this feature!

    Probably you are not using the right settings in the Refine Edge Dialog box. Can you share the image with us so that we can try it at our end.

  • Photoshop script to export to Edge not working on mac?

    Hi
    Have any PhotoShop CC 2014 v15.2.2 mac users used the script supplied by Adobe on Sep 18, 2014 successfully? 
    blogs.adobe.com/edge/2014/edge/2014/09/18/export-sprite-sheet-from-adobe-photoshop/
    Please, I've started this thread again, I really need Photoshop on the mac to generate the proper sprite sheet .png etc for Edge -
    thanks
    Sharon

    PROBLEM SOLVED.  With my new Mac Mini, I also got a new Logitech K750 Mac wireless keyboard and a Logitech M310 wireless mouse.
    I just disconnected the new keyboard and mouse and re-connected my ancient, wired Macally keyboard and ancient Logitech wireless mouse.  Bingo!  The Photoshop Action shortcuts now work as advertised.
    My apologies for not trying this sooner, but since the new mouse and keyboard have worked with absolutely every other app I have, I didn't suspect them.
    -Chris

  • Edge Not Working: 1 in 4 iphones suck bad

    So I've had my iphone for about a year now (currently with 2.2), with no problems and many smiles, but for the past few weeks my edge hasn't been working at all. Wifi is good in every hotspot I can find, but the edge seems to be down. I've looked and looked and tried and tried every suggestion that there is online, save taking the ** thing to the apple store downtown (or to a brick), and nothing works. There are four people in my household with the iphone, and I'm the only one experiencing these problems with my iphone. Have any of you had this sort of situation? I'm planning on checking this post throughout the night and if there's no answer I'll be heading to the Apple Store in the morning. <Edited by Moderator> I'll repost when I get back from the store so that anyone having the same problems will know what happened.

    This could be due to a SIM card problem with your iPhone. You can take your iPhone to the nearest AT&T corporate store explaining your problem and they will give you a new SIM card. You must activate the new SIM card with your iPhone via the iTunes activation process.
    If not a SIM card problem, this may be due to a hardware problem and if so, Apple includes a one year warranty with the iPhone.

  • All aps that require wifi or edge not working

    Is anyone else having this problem. I can't connect using wifi or edge. All I get is no service.

    I just posted a similar thread, under a different category.
    I'm having a similar prob. I got my phone replaced today, wifi works, edge doesn't. I have a edge symbol present though.
    If it's not one problem, it's another.
    agh!!

  • Edge not working and not showing E icon

    All day today all over the city (San Diego, CA) I have been unable to connect to the edge network. Not even the "E" icon is showing on the phone. I have no problem connecting to WIFI at my house or picking up wifi signals at any location.
    I have had the phone since July and have not had any problems with it before. Phone and text are working just fine.
    I have tried troubleshooting (turning on and off, resetting network settings etc...nothing works.) I want to get other opinions before I call AT&T and knock some heads together. Thanks
    Message was edited by: isaac0503

    call at&t it happened to me, they fixed in 5 minutes

  • Do I need 'reactivation'? how to do it? EDGE not working...

    I have a vodafone locked iPhone 3G in India and have subscribed to an EDGE plan for prepaid here in Mumbai. It used to work fine so far now all of a sudden EDGE has simply stopped working. THE dodos at vodafone keep on transferring my call so am sure they wont be helping me around. Can someone tell me what could be wrong? I have cleared the safari cache and cookies.
    WIFI works fine. Can I 'reactivate' my phone? if yes, how?
    thanks
    Neerav
    PS: I do see the edge symbol E in blue.
    Message was edited by: AceNeerav

    I factory restored the phone, let it get activated by vodafone and then restored from a backup. Didn't work.

  • Stage transparency in edge not working with dps

    I try to make the stage transparency in edge, add some object with motion on that file, then paste it as a oam file into indesign for dps use. I try the way that discussed in http://forums.adobe.com/message/4401867, when preview in desktop, everything including the transparancy looks ok(except the circle object becomes a rectangle), but in a real ipad, the transparancy stage become a white box, I know it may have something to do with the poster image, so I use photoshop to change that poster image into a totally transparancy png file, still don't work at all.  Somebody help me.

    Hi,
    I have the same problem:
    InDesign CS6 with newest updates
    Folio Set to Automatically
    Viewer Version set to 23
    Adobe Edge Animate OAM-Packages have no transparency, they have a grey background when I place them in a Folio within InDesign which is set to "AUTOMATICALLY".
    When I import the Animation as a WebContent it is fine.
    The screenshot shows the differences:
    Screenshot from Content Viewer on Windows. On the iPad the animation isnt shown at all, I dont know why..

  • EDGE Not Working Properly - iPhone Forced To Find It

    This is weird. Normally I've got the "E" registered on the top of my screen and all is well when I'm not in WiFi range. After my first charge of a replacement iPhone (the other one was all kinds of whacko), the "E" no longer shows up unless I use an Application to force it. I can't manually check my email without first going into the Stocks or Weather widget first so that the EDGE network can be "found." Same deal with Voicemail. Voicemail isn't available until the EDGE network is forced to be activated using one of the "automatic" widgets. Any ideas?

    You can try restoring your phone as described in http://support.apple.com/kb/HT1414
    If that doesn't help, make an appointment to have an Apple Retail Store Genius look at your phone. http://www.apple.com/retail/geniusbar/
    I had to have an iPhone 3GS replaced due to an intermittent home button.

  • EDGE not working properly

    When i try to use safari, stocks or weather everyhtong works for first few seconds. Latter all requesta are stuck at gateway timeout

    Where are you located?
    Have you tried powering the iPhone off and on and/or doing a Reset?

  • Adobe Edge links not working

    Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

    When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
    The hosts file is in /private/etc/hosts and can be accessed through the terminal:
    sudo nano /private/etc/hosts
    If you see a bunch of adobe servers in there, that is your problem.

  • Edge.oam animation file not working in Muse

    Anybody tell me what I'm doing wrong?
    I've created an edge animation, published an .oam file and placed it on a Muse wepage (no prob).
    Preview in Muse works beautifully.
    Preview in browser from Muse works beautifully.
    Export Muse to HTML and Edge animation not displaying – looked at the code, shows an iframe with link to edge html, but just not working.
    ...help please

    Someone please help me with this... I dont understand where the src path should point to when updated? Can you give an example path. I am not using edge animate but instead HYPE 3 which is relatively the same thing, exports html animations as an OAM or html file. When I use the OAM in muse it previews fine in browser and in Muse. But when I publish it shows a blank box. I looked at the code and see the iframe pointing to assets/example/example.html.
    I've tried exporting the Muse file as HTML after I've placed the OAM widget in Muse.. Then I navigate to the assets file and open the HTML file and try and locate the iframe code line but it does NOT exist. But if i Publish the site with Muse and OAM widget and use the developers tools I can see the iframe. After that I've tried going through filezilla to the assets folder and opening the HTML file but still NO iframe code line exists. I only find src for .js code.
    PLEASE HELP... would really like to integrate these animations into my projects.
    Thanks

Maybe you are looking for