Edge server licensing fails
Hi
I'm trying to change Lync server 2013 Edge from evaluation to licenced.
Using msiexec.exe /fvomus server.msi EVALTOFULL=1 /qb command Windows installer window appears
but after message
Gathering required information" it just closes. command is started from correct media path
Get-CsServerVersion notes that i'm still using evaluation licence.
Please help!
Hi,
Did you already change Lync Server from evaluation to licensed version for FE Server?
1. Please perform the cmdlet "msiexec.exe /fvomus server.msi EVALTOFULL=1 /qb" with Lync Server Management Shell.
2. Then on Lync Server Management Shell, run "Enable-CsComputer"
Then check the Lync Server Version again.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support
Similar Messages
-
Lumira Server for BI Platform and Team/Edge consumption & licensing question
Hi. I have a few questions.
Question 1:
From my reading, I've heard that Lumira Edge/Team server may not be a part of BI-Suite License. I read a Lumira Server ASUG Webcast recap by Tammy Powlas here (SAP Lumira Server for Teams Roadmap ASUG Webcast) over the weekend and one of the Q&A questions struck me:
Q: Is this included with the BI Suite license from SAP?
A: Lumira Server for Teams (Edge Edition) is not covered under BI Suite License. However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
In a separate conversation late 2014, I thought I'd heard that Lumira Team/Edge server was supposed to be usable by BI Suite licensed customers, but it sounds like I'm mistaken?
Question 2:
Next, the second part of the statement gave me hope:
However, Lumira Server for BI Platform (RTC Planned in April) is covered under BI Suite licenses
I then looked at the Lumira Deployment Options for Departments Part 1 – ASUG Webcast by Tammy Powlas to get some more information on Lumira Server for BI Platform. This slide gave me some hope (emphasis mine in green):
But then I see some more information a little later:
Is this slide to imply that the version without HANA (or HANA XS) for BI Platform will only really just serve as a user rights management and Lumira document repository? And that if I want to view a Lumira document, I must still open from the Lumira Desktop client?
It was suggested I start a new discussion thread to ask this licensing question about a product that's not out yet (but the slide says it's GA so I'm still confused) so here I am with my discussion thread!
Hopefully someone can make me less confused. I'm hoping the answer is as a BI-Suite customer that we do not have to make a decision to either invest in new Edge/Team licenses or buy HANA XS hardware to establish a beachhead of Lumira usage in our organization. We've been struggling with promoting Lumira and the sharing piece has been the sore spot.Hi Michael
You are right, it is confusing...
I think it will be better to contact sales to get this explained as opposed to technical support people that monitor this SCN Space.
Sales ph: 866-681-3435, 1-800-677-7271
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter (#SAPLumira)
Got Enhancement ideas? Use the SAP Idea Place -
Do we need License for Lync 2013 Edge server?
Hello Team,
We are currently running Lync 2013 Standard Edition Server. We are planning to enable users for External access and planning to deploly Lync 2013 edge server.
1. Do we need License for Lync 2013 Edge server?
2. Any other client licenses needed?
Please advise.Hi,
No you don't required any additional License in order to install Lync Edge server. the only license required at OS level i mean windows server licence in terms of Lync concern you don't require any additional License
check this
https://products.office.com/en-us/lync/microsoft-lync-licensing-overview-lync-for-multiple-users
http://lyncuc.blogspot.in/2013/02/lync-2013-licensing-guide-how-to.html
And for client also you don't require any additional license with your existing client license will work for externally as well
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question. -
New Edge server fails with DNS lookups - incoming mail stuck in queue
I just setup an Edge server, together with 2 Ex2013 servers with DAG. Sync works fine, however incoming mails are stuck at the edge server. The queue looks like this:
451 4.4.0 DNS query failed. The error was: DNS query failed with error ErrorRetry
Checking the logs, it also shows errors like this:
2014-07-12T16:32:06.599Z,08D16C05D02E2774,SMTP,"ex2.internal.contoso.com,ex3.internal.contoso.com,ex4.internal.contoso.com",>,DNS server returned ErrorRetry reported by 0.0.0.0. [Domain:Result] = EX2.internal.contoso.com:ErrorRetry; EX3.internal.contoso.com:ErrorRetry; EX4.internal.contoso.com:ErrorRetry;
2014-07-12T16:32:06.599Z,08D16C05D02E2774,SMTP,"ex2.internal.contoso.com,ex3.internal.contoso.com,ex4.internal.contoso.com",-,"Messages: 0 Bytes: 0 (The DNS query for 'SmartHostConnectorDelivery':'ex2.internal.contoso.com,ex3.internal.contoso.com,ex4.internal.contoso.com':'e01d6f93-e25b-4e36-9f2f-c1c7c73889ae' failed with error : ErrorRetry)"
Now the network is a little special, as the edge server is not in DMZ, but simply in a workgroup in the same LAN as the other Exchange servers. The edge server NIC's are configured to use the internal AD DNS servers, and the edge server is able to lookup
all the other exchange servers (ie. ex2.internal.contoso.com).
So I wonder why the edge servers logs DNS lookup errors as long as the server it self can lookup the internal hostnames for Exchange.
Any help would be great, as all incoming mail is now stuck at the edge server.This is from the Edge server:
[PS] C:\Windows\system32>Get-SendConnector | fl
AddressSpaces : {smtp:*;100}
AuthenticationCredential :
CloudServicesMailEnabled : False
Comment :
ConnectedDomains : {}
ConnectionInactivityTimeOut : 00:10:00
DNSRoutingEnabled : True
DomainSecureEnabled : True
Enabled : True
ErrorPolicies : Default
ForceHELO : False
Fqdn :
FrontendProxyEnabled : False
HomeMTA :
HomeMtaServerId :
Identity : EdgeSync - MyCity to Internet
IgnoreSTARTTLS : False
IsScopedConnector : False
IsSmtpConnector : True
MaxMessageSize : 100 MB (104,857,600 bytes)
Name : EdgeSync - MyCity to Internet
Port : 25
ProtocolLoggingLevel : Verbose
RequireOorg : False
RequireTLS : False
SmartHostAuthMechanism : None
SmartHosts : {}
SmartHostsString :
SmtpMaxMessagesPerConnection : 20
SourceIPAddress : 0.0.0.0
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {}
TlsAuthLevel :
TlsCertificateName :
TlsDomain :
UseExternalDNSServersEnabled : False
AddressSpaces : {smtp:--;100}
AuthenticationCredential :
CloudServicesMailEnabled : False
Comment :
ConnectedDomains : {}
ConnectionInactivityTimeOut : 00:10:00
DNSRoutingEnabled : False
DomainSecureEnabled : False
Enabled : True
ErrorPolicies : Default
ForceHELO : False
Fqdn :
FrontendProxyEnabled : False
HomeMTA :
HomeMtaServerId :
Identity : EdgeSync - Inbound to MyCity
IgnoreSTARTTLS : False
IsScopedConnector : False
IsSmtpConnector : True
MaxMessageSize : Unlimited
Name : EdgeSync - Inbound to MyCity
Port : 25
ProtocolLoggingLevel : Verbose
RequireOorg : False
RequireTLS : False
SmartHostAuthMechanism : ExchangeServer
SmartHosts : {--}
SmartHostsString : --
SmtpMaxMessagesPerConnection : 20
SourceIPAddress : 0.0.0.0
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {}
TlsAuthLevel :
TlsCertificateName :
TlsDomain :
UseExternalDNSServersEnabled : False
This is from the Hub/CAS/MBX server:
[PS] C:\Windows\system32>Get-SendConnector | fl
AddressSpaces : {SMTP:*;1}
AuthenticationCredential :
CloudServicesMailEnabled : False
Comment :
ConnectedDomains : {}
ConnectionInactivityTimeOut : 00:10:00
DNSRoutingEnabled : True
DomainSecureEnabled : False
Enabled : False
ErrorPolicies : Default
ForceHELO : False
Fqdn : mail.va-world.com
FrontendProxyEnabled : False
HomeMTA : Microsoft MTA
HomeMtaServerId : EX3
Identity : outgoing SMTP
IgnoreSTARTTLS : False
IsScopedConnector : False
IsSmtpConnector : True
MaxMessageSize : 151.6 MB (158,965,760 bytes)
Name : outgoing SMTP
Port : 25
ProtocolLoggingLevel : Verbose
RequireOorg : False
RequireTLS : False
SmartHostAuthMechanism : None
SmartHosts : {}
SmartHostsString :
SmtpMaxMessagesPerConnection : 20
SourceIPAddress : 0.0.0.0
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {EX4, EX3}
TlsAuthLevel :
TlsCertificateName :
TlsDomain :
UseExternalDNSServersEnabled : False
AddressSpaces : {smtp:*;100}
AuthenticationCredential :
CloudServicesMailEnabled : False
Comment :
ConnectedDomains : {}
ConnectionInactivityTimeOut : 00:10:00
DNSRoutingEnabled : True
DomainSecureEnabled : True
Enabled : True
ErrorPolicies : Default
ForceHELO : False
Fqdn :
FrontendProxyEnabled : False
HomeMTA : Microsoft MTA
HomeMtaServerId : Edge01
Identity : EdgeSync - MyCity to Internet
IgnoreSTARTTLS : False
IsScopedConnector : False
IsSmtpConnector : True
MaxMessageSize : 100 MB (104,857,600 bytes)
Name : EdgeSync - MyCity to Internet
Port : 25
ProtocolLoggingLevel : Verbose
RequireOorg : False
RequireTLS : False
SmartHostAuthMechanism : None
SmartHosts : {}
SmartHostsString :
SmtpMaxMessagesPerConnection : 20
SourceIPAddress : 0.0.0.0
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {Edge01}
TlsAuthLevel :
TlsCertificateName :
TlsDomain :
UseExternalDNSServersEnabled : False
AddressSpaces : {smtp:--;100}
AuthenticationCredential :
CloudServicesMailEnabled : False
Comment :
ConnectedDomains : {}
ConnectionInactivityTimeOut : 00:10:00
DNSRoutingEnabled : False
DomainSecureEnabled : False
Enabled : True
ErrorPolicies : Default
ForceHELO : False
Fqdn :
FrontendProxyEnabled : False
HomeMTA : Microsoft MTA
HomeMtaServerId : Edge01
Identity : EdgeSync - Inbound to MyCity
IgnoreSTARTTLS : False
IsScopedConnector : False
IsSmtpConnector : True
MaxMessageSize : Unlimited
Name : EdgeSync - Inbound to MyCity
Port : 25
ProtocolLoggingLevel : Verbose
RequireOorg : False
RequireTLS : False
SmartHostAuthMechanism : ExchangeServer
SmartHosts : {--}
SmartHostsString : --
SmtpMaxMessagesPerConnection : 20
SourceIPAddress : 0.0.0.0
SourceRoutingGroup : Exchange Routing Group (DWBGZMFD01QNBJR)
SourceTransportServers : {Edge01}
TlsAuthLevel :
TlsCertificateName :
TlsDomain :
UseExternalDNSServersEnabled : False
I should note that all the Exchange servers are behind the same public IP, I just use NAT in my firewall to seperate the ports (50636 and 25 into the Edge server, 80/443 into the CAS/MBS server). -
Configuring Lync 2010 Mobility with Front end and Edge Server
I have been racking my brain the past week trying to figure out how to get the lync edge server working properly and how to get the mobility service working properly.
Currently I have 1 front end server that is configured and working. I have one edge server that has been configured according to nearly every online help I could find along with public CERT.
If I use microsoft's online connectivity test and I run the test for
Lync Server Remote Connectivity Test everything passes. I am also able to connect to lync using a windows lync client from outside of the internal network however I have to specify the server name as being sip.ourdomain.com I cannot get connected using
autodiscover.
When I run the Lync Autodiscover Web Service Remote Connectivity Test it fails due to SSL error to lyncdiscover.ourdomain.com which then lead me down the path that I needed to install
the Mobility service but it also tells me that I may need to update our SSL cert as well.
This is where I am getting confused and would like to be pointed in the correct direction.
When I installed mobility service on the front end server it created the autodiscover section in IIS. If I am inside our network I can browse to it without any issue. Where I am confused at this point is how to either setup DNS or how to configure
the edge server to use autodiscover.
Do I need to setup an additional public IP and point lyncdiscover.ourdomain.com to the IP of our front end server or to our edge server? If I have to point this to our front end server then that would mean that I use one public IP that goes to 443,
444 and 5061 for our edge server and then I would need one public IP that goes to ports 443 and 80 that get redirected to ports 4443 and 8080 on our front end server? If that is the case then do I have to get an external cert for the front end server
that contains lyncdiscover or can clients connect if it is just using the self signed cert from the domain?
This is where I am getting confused at and hopefully some nice folks out there can clarify this for me so I can get this resolved.
Thank you
KKYou need an additional public IP to point to a reverse proxy, which will listen on port 443 and proxy requests to your front end server on port 4443 (notice the extra 4). You can use IIS ARR, Web Application Proxy, or whatever else you may have for
this purpose, but you need to ensure you redirect port 443 to port 4443. This reverse proxy cannot be collocated on your front end server or edge, you'll need a separate box or appliance.
Beyond Lyncdiscover, you'll want to do this for your external web services FQDN as defined in the topology builder and your meet and dialin URLs too. You'll want a third part cert for all of this (though it doesn't need to be installed on the front
end, just the reverse proxy) so that you don't need to install any internally signed root certs on anyone's smartphone.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
SQL Server License from SAP to use the Business Intelligence Stack
Hi Sean,
SQL Server license is a very complicated issue. If the tool is given to you in the package, it should be ok to use it. There is no update for the info provided in the blog although it is over 3 years.
Thanks,
GordonHi delaynomore,
According to your description, you fail to execute the function with timeout error after migration to SQL Server 2012. Based on my research, the issue could be due to the long running tasks or uncommitted transactions.
To troubleshoot the issue, besides Olaf's suggestion to check the connection to SQL Server 2012 instance and the stored procedure using SQL Server Management Studio(SSMS) manually, you could also follow the methods below.
1. Execute that procedure manually using SSMS and check if it takes a very long time to execute and return. For example, there could be millions of rows being updated. If it takes a long time, you can adjust the CommandTimeout accordingly.
2. Execute the following statement in SSMS to check if there are any uncommitted transactions: dbcc opentran ('yourDatabaseName'). If there are any uncommitted transactions, please change the stored procedure accordingly to commit the transactions.
For more information about the process, please refer to the article:
http://blogs.msdn.com/b/spike/archive/2008/07/31/timeout-expired-the-timeout-period-elapsed-prior-to-completion-of-the-operation-or-the-server-is-not-responding.aspx
Regards,
Michelle Li -
Exchange 2013 Edge Transport install fails
I'm trying to install the Edge Transport for Exchange 2013 but it gets to step 7 of 9:
then give's the following error
Error:
The following error was generated when "$error.Clear();
new-ExchangeServer
" was run: "Value cannot be null.
Parameter name: Cannot get child of ADObjectId: this is a GUID based ADObjectId.".
Then in event viewer I have the following two events.
Watson report about to be sent for process id: 260, with parameters: E12IIS, c-RTL-AMD64, 15.00.0847.032, ExSetupUI, M.E.Data.Directory, M.E.D.D.ADObjectId.GetChildId, System.ArgumentNullException, 2ac6, 15.00.0847.031.
ErrorReportingEnabled: True
and
Exchange Server component Edge Transport Role failed.
Error: Error:
The following error was generated when "$error.Clear();
new-ExchangeServer
" was run: "Value cannot be null.
Parameter name: Cannot get child of ADObjectId: this is a GUID based ADObjectId.".
I've rebuilt the server but since it has something to do with the GUID I assumed it wouldn't work but I was grasping at straws and it didn't fix the issue.
I can run the setup again and it does finish but it doesn't show up in the list of servers in the ecp management. I've yet to find a solution on this issue if anyone has a suggestion or two it would be greatly appreciated.Thanks for response.
when I run Get-ExchangeServer I get the following
Name Site ServerRole Edition AdminDisplayVersion
Exchange03 Edge Standard... Version
15.0 (Bu...
and the errors that are in the log
[02/17/2015 20:06:33.0084] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: ADAM is installed on this machine; only the Microsoft Exchange Edge Transport server role may be installed. See the Exchange setup log
for more information on this error.
[02/17/2015 20:07:50.0288] [1] The following 1 error(s) occurred during task execution:
[02/17/2015 20:07:50.0288] [1] 0. ErrorRecord: Service SMTPSVC was not found on computer '.'.
[02/17/2015 20:07:50.0288] [1] The previous errors were generated by a non-critical task and will be ignored.
then I have a load of error that failed to load dependency below is a small sample
[02/17/2015 20:07:57.0648] [2] Process standard output: Installing assembly C:\Program Files\Microsoft\Exchange Server\V15\bin\edgetransport.exe
Failed to load dependency Microsoft.Management.OData of assembly Microsoft.Exchange.Configuration.ObjectModel, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
Failed to load dependency Microsoft.Ceres.InteractionEngine.Processing.BuiltIn of assembly Microsoft.Exchange.Data.Storage, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified.
(Exception from HRESULT: 0x80070002)
Failed to load dependency Microsoft.Ceres.NlpBase.RichTypes of assembly Microsoft.Exchange.Data.Storage, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception
from HRESULT: 0x80070002)
Failed to load dependency System.IdentityModel.Tokens.Jwt of assembly Microsoft.Exchange.Security, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception from
HRESULT: 0x80070002)
Failed to load dependency Microsoft.Passport.RPS of assembly Microsoft.Exchange.Security, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35 because of the following error : The system cannot find the file specified. (Exception from HRESULT:
0x80070002)
Thanks -
Problems with SNOM 7XX phones and presence of Lync Edge server
Hi to all,
we have this problem, this is the scenario (two Lync 2013 st ed. servers):
- lync 2013 FE server have internal IP address 172.21.212.XXX with internal gateway 172.21.212.254
- lync 2013 edge server have two network interface:
First INTERFACE: 3 IPs in 172.21.30.XXX (Access, web and A/V Edge) for external connection with 172.21.30.254 and internal gateway (IP NAT with public IP)
Second INTERFACE: IP 172.21.212.XXX for internal connection without gateway
- snom 7XX (50 phones) are connect to the lync server and all internal call works fine. All phones are in an internal dedicated network 172.21.218.XXX with default gateway 172.21.218.254
- when making external call with 7XX SNOM phones, the call was routed to Trunk COLT with Lync Mediation server and all works fine.
- when Lync Mediation server receive a call from our trunk COLT we have this situation:
All Lync 2013 clients work fine, audio is OK, (network 172.21.216.XXX)
Polycom CX3000 work fine audio is OK (network 172.21.218.XXX)
SNOM 710, 720, 760 FW 8.8.2.16 UC series, phones ring but NO SOUNDS from the phones and after a few seconds "Call failed due to network issues."
The only way to solve the problem is to disable the connection with Lync Edge server (remove gateway 172.21.30.254)
BUT this is not the solution because now we have no connection with INTERNET (skype, web conferencing doesen't work without edge gateway)
Why SNOM phones try to use the EDGE gateway to connect the call? Why doesn't use Lync Mediation server?
Can you help us to find a solution?
Thanks
AurelioHi,
Thanks to all for yours support.
Today, we have done some test (no employee in office today
J) and we have solved the problems.
The old implementation have had this configuration:
- the phone numbers have had a no E.164 format compliant: for all users number, the phone number have had this format TEL:012345XYZW ; EXT=XYZW with the normalization
rules:
Starting digits: 01234567
Length: At least 8 digits
Digit to remove: 0
Digit to add: nothing
Pattern to match ^(01234567\d*)$
All worked fine with this previous configuration:
Lync 2010 std with only mediation server function + Lync 2013 std front-end with all the others functions and Lync 2013 std Edge server for external connection with
Lync client Skype world, BUT we have had disabled in SNOM phones ICE function because if ICE was enabled no voice can we hear from the phones.
After dismissed Lync 2010 with only a Lync 2013 infrastructure, this configuration don’t permit to use edge server because with ICE enabled or disabled no voice from
SNOM phones.
Today we have done this operation:
Setting in Lync 2013 control panel all number for all users, in E.164 format compliant:
The phone number now have this format TEL:+39012345XYZW ; EXT=XYZW and we have deleted the previous normalization roles.
We have added this role for the EXT numbers:
Name: Routing Interno
Starting Digits: XY
Length: Exactly 4 (i.e. XYZW)
Digit to remove 0
Digit to add: +39012345
Pattern to match: ^(XY\d(2))$
Translation rule: +39012345$1
Internal extension = checked
And now all work fine.
We have solved another problem:
Lync client 2013 can't find new users:
all new Lync users are not discovered from Lync 2013 client, probably because this setting is present with Lync 2010:
PS C:\> Get-CsAddressBookConfiguration
Identity
: Global
RunTimeOfDay
: 1:30 AM
KeepDuration
: 30
SynchronizePollingInterval : 00:00:30
MaxDeltaFileSizePercentage : 20
UseNormalizationRules
: True
IgnoreGenericRules
: False
EnableFileGeneration
: True
With only Lync 2013 servers we have changed
IgnoreGenericRules to True
To set UseNormalizationRules and IgnoreGenericRules to true for Lynk 2013 infrastructure.
http://technet.microsoft.com/en-us/library/jj205160.aspx
For us all the problems are SOLVED!
Aurelio -
The access edge server you specified does not exist
Hi,
I am trying to enable federation with Skype. I have Skype4B (Lync) 2013. unfortunately when I go to prvisioning site at https://pic.lync.com and try to enter my access edge server, it says: "The
Access Edge service FQDN you specified does not exist."
Does anyone have any idea why? searched online but apparently there are not answers.
Thanks,Hi Atif7865,
The SIP domain and the Access Edge server must be active, functioning, and reachable on the network.
Please double check the DNS records and network , make sure they are functioning properly.
If the error message persists, please contact Microsoft Customer Support Services to get help. For a complete list of Microsoft Customer Support Services telephone numbers and information,
visit the following Microsoft website:
https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Oracle By Example: Sensor Edge Server
This morning I found some information about the Sensor Edger Server (10g AS Version 10.1.2) on the Oracle by Example web site:
http://www.oracle.com/technology/obe/start/as.html
Follow the link for 10.1.2 and you will find an example for the Sensor Edge Server.
Best Regards,
Jim SHello,
I tried to compile the example of QBE: EdgeSimulator.java
However, the oracle.edge.* packages are not available.
I already added the jar files in Edge_Home\lib to the project library, but it still failed.
Could anyone tell me how to get these packages?
Thanks for your information!! -
Hello everyone,
I am trying to clone my 2010 EDGE server located on a 2k8 SP2 to a 2010 EDGE server located on a 2k12R2 server. I exported the file, created the answer file on the new server, but when I do the import from the new Edge, I get this message. Can
someone
[PS] C:\Users\Administrator\Desktop\Exch\scripts>./ImportEdgeConfig.ps1 -CloneConfigData:"C:\CloneConfigData.xml" -IsImport $true -CloneConfigAnswer:"C:\CloneConfigAnswer.xml"
Warning:Passwords will be encrypted with the default script encryption key
Set-TransportServer : You can't use this command to configure an Edge Transport server on a machine that is on your int
ernal network. You must perform this operation directly on the Edge Transport server.
At line:1 char:57
+ Get-TransportServer -Identity:EDGE | Set-TransportServer <<<< -AntispamAgentsEnabled:$true -ConnectivityLogEnabled:$
true -ConnectivityLogMaxAge '30.00:00:00' -ConnectivityLogMaxDirectorySize '1000 MB (1,048,576,000 bytes)' -Connectivit
yLogMaxFileSize '10 MB (10,485,760 bytes)' -ConnectivityLogPath 'C:\Program Files\Microsoft\Exchange Server\V14\Transpo
rtRoles\Logs\Connectivity' -DelayNotificationTimeout '04:00:00' -ExternalDNSAdapterEnabled:$true -ExternalDNSAdapterGui
d '00000000-0000-0000-0000-000000000000' -ExternalDNSProtocolOption 'Any' -ExternalDNSServers:$null -ExternalIPAddress:
$null -InternalDNSAdapterEnabled:$true -InternalDNSAdapterGuid '00000000-0000-0000-0000-000000000000' -InternalDNSProto
colOption 'Any' -InternalDNSServers:$null -MaxConcurrentMailboxDeliveries '20' -MaxConcurrentMailboxSubmissions '20' -M
axConnectionRatePerMinute '1200' -MaxOutboundConnections '1000' -MaxPerDomainOutboundConnections '20' -MessageExpiratio
nTimeout '2.00:00:00' -MessageRetryInterval '00:01:00' -MessageTrackingLogEnabled:$true -MessageTrackingLogMaxAge '30.0
0:00:00' -MessageTrackingLogMaxDirectorySize '1000 MB (1,048,576,000 bytes)' -MessageTrackingLogMaxFileSize '10 MB (10,
485,760 bytes)' -MessageTrackingLogPath 'C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\MessageTrac
king' -IrmLogEnabled:$true -IrmLogMaxAge '30.00:00:00' -IrmLogMaxDirectorySize '250 MB (262,144,000 bytes)' -IrmLogMaxF
ileSize '10 MB (10,485,760 bytes)' -IrmLogPath 'C:\Program Files\Microsoft\Exchange Server\V14\Logging\IRMLogs' -Active
UserStatisticsLogMaxAge '30.00:00:00' -ActiveUserStatisticsLogMaxDirectorySize '250 MB (262,144,000 bytes)' -ActiveUser
StatisticsLogMaxFileSize '10 MB (10,485,760 bytes)' -ActiveUserStatisticsLogPath 'C:\Program Files\Microsoft\Exchange S
erver\V14\TransportRoles\Logs\ActiveUsersStats' -ServerStatisticsLogMaxAge '30.00:00:00' -ServerStatisticsLogMaxDirecto
rySize '250 MB (262,144,000 bytes)' -ServerStatisticsLogMaxFileSize '10 MB (10,485,760 bytes)' -ServerStatisticsLogPath
'C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ServerStats' -MessageTrackingLogSubjectLoggingEnab
led:$true -OutboundConnectionFailureRetryInterval '00:30:00' -IntraOrgConnectorProtocolLoggingLevel 'None' -PickupDirec
toryMaxHeaderSize '64 KB (65,536 bytes)' -PickupDirectoryMaxMessagesPerMinute '100' -PickupDirectoryMaxRecipientsPerMes
sage '100' -PickupDirectoryPath 'C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Pickup' -PipelineTracing
Enabled:$false -ContentConversionTracingEnabled:$false -PipelineTracingPath 'C:\Program Files\Microsoft\Exchange Server
\V14\TransportRoles\Logs\PipelineTracing' -PipelineTracingSenderAddress:$null -PoisonMessageDetectionEnabled:$true -Poi
sonThreshold '2' -QueueMaxIdleTime '00:03:00' -ReceiveProtocolLogMaxAge '30.00:00:00' -ReceiveProtocolLogMaxDirectorySi
ze '250 MB (262,144,000 bytes)' -ReceiveProtocolLogMaxFileSize '10 MB (10,485,760 bytes)' -ReceiveProtocolLogPath 'C:\P
rogram Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpReceive' -RecipientValidationCacheEnable
d:$true -ReplayDirectoryPath 'C:\Program Files\Microsoft\Exchange Server\V14\TransportRoles\Replay' -RoutingTableLogMax
Age '7.00:00:00' -RoutingTableLogMaxDirectorySize '50 MB (52,428,800 bytes)' -RoutingTableLogPath 'C:\Program Files\Mic
rosoft\Exchange Server\V14\TransportRoles\Logs\Routing' -SendProtocolLogMaxAge '30.00:00:00' -SendProtocolLogMaxDirecto
rySize '250 MB (262,144,000 bytes)' -SendProtocolLogMaxFileSize '10 MB (10,485,760 bytes)' -SendProtocolLogPath 'C:\Pro
gram Files\Microsoft\Exchange Server\V14\TransportRoles\Logs\ProtocolLog\SmtpSend' -TransientFailureRetryCount '6' -Tra
nsientFailureRetryInterval '00:10:00' -TransportSyncEnabled:$false -TransportSyncPopEnabled:$false -WindowsLiveHotmailT
ransportSyncEnabled:$false -WindowsLiveContactTransportSyncEnabled:$false -TransportSyncExchangeEnabled:$false -Transpo
rtSyncImapEnabled:$false -MaxNumberOfTransportSyncAttempts '3' -MaxActiveTransportSyncJobsPerProcessor '16' -HttpProtoc
olLogEnabled:$false -HttpProtocolLogFilePath:$null -HttpProtocolLogMaxAge '7.00:00:00' -HttpProtocolLogMaxDirectorySize
'250 MB (262,144,000 bytes)' -HttpProtocolLogMaxFileSize '10 MB (10,485,760 bytes)' -HttpProtocolLogLoggingLevel 'None
' -TransportSyncLogEnabled:$false -TransportSyncLogFilePath:$null -TransportSyncLogLoggingLevel 'None' -TransportSyncLo
gMaxAge '30.00:00:00' -TransportSyncLogMaxDirectorySize '10 GB (10,737,418,240 bytes)' -TransportSyncLogMaxFileSize '10
MB (10,485,760 bytes)' -TransportSyncHubHealthLogEnabled:$false -TransportSyncHubHealthLogFilePath:$null -TransportSyn
cHubHealthLogMaxAge '30.00:00:00' -TransportSyncHubHealthLogMaxDirectorySize '10 GB (10,737,418,240 bytes)' -TransportS
yncHubHealthLogMaxFileSize '10 MB (10,485,760 bytes)' -TransportSyncAccountsPoisonDetectionEnabled:$false -TransportSyn
cAccountsPoisonAccountThreshold '2' -TransportSyncAccountsPoisonItemThreshold '2' -TransportSyncAccountsSuccessivePoiso
nItemThreshold '3' -TransportSyncRemoteConnectionTimeout '00:01:40' -TransportSyncMaxDownloadSizePerItem '25 MB (26,214
,400 bytes)' -TransportSyncMaxDownloadSizePerConnection '50 MB (52,428,800 bytes)' -TransportSyncMaxDownloadItemsPerCon
nection '1000' -UseDowngradedExchangeServerAuth:$false -IntraOrgConnectorSmtpMaxMessagesPerConnection '20'
+ CategoryInfo : InvalidOperation: (:) [Set-TransportServer], CannotSetEdgeTr...erOnAdException
+ FullyQualifiedErrorId : 6BE3A2C5,Microsoft.Exchange.Management.SystemConfigurationTasks.SetTransportServer
Name DomainName
DomainType Default
A9ABA4D2-C21C-4bc5-8B30-3EA... A9ABA4D2-C21C-4bc5-8B30-3EA... Authoritative False
Confirm
Are you sure you want to perform this action?
Removing Accepted Domain "maranathahs.org".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): y
Confirm
Are you sure you want to perform this action?
Removing Accepted Domain "A9ABA4D2-C21C-4bc5-8B30-3EA47BBE3608".
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help (default is "Y"): y
Importing Edge configuration information Failed.
Reason: This task can only be performed on a Hub Transport server role or an Edge Transport server role.Install the Exchange 2013 Edge Transport role using the Setup wizard -
http://technet.microsoft.com/en-us/library/dn635117%28v=exchg.150%29.aspx
Exchange Server 2013 SP1 – EDGE Role – Part 2 -
http://justaucguy.wordpress.com/2014/03/07/exchange-server-2013-sp1-edge-role-part-2/
And if you like command line install then here it is...
Exchange 2013 SP1 Edge Transport Server -
http://www.jaapwesselius.com/2014/06/01/exchange-2013-sp1-edge-transport-server/ -
Edge server role hardware requirements
I'm new to Exchange Server 2007 and am in the early stages of planning the installation and deployment. This server will be used in a company with approximately 25 users.
My plan is to use a one machine for Client Access, Hub transport, Mailbox, and Unified messaging.
What are the hardware requirements for the machine that will be running the Edge Server role? Are they different than the machine that will be running the other four roles?
Would 25 CALS be required for the edge server and 25 for the server running the other four roles?
ThanksYou will find all Hardware requirements here (all roles)
http://msexchangeteam.com/archive/2007/01/16/432222.aspx
All clients only need one CAL for all Exchange server
I don't even think that you need a CAL for the EDGE server
You do need an Exchange Server License for every server you have
Deli -
Lync 2013 client can't connect externally to edge server
So I have my edge server set up in the DMZ. 3 ips bound to an interface for external connectivity.
sip.domain.org (A record)
webconf.domain.org (A record)
av.domain.org (A record)
_sip.tls.domain.org:443 pointing to the same IP as sip.domain.org
External Lync Clients should be using this srv record to auto-connect, correct?
I have purchased a thawte ssl cert and bound it correctly to the external interface. Internal interface is a PKI internal CA cert. Sometimes when doing a testconnectivity from MS, it comes up stating " The certificate couldn't be validated because
SSL negotiation wasn't successful", when other times I run the test and it states that it validates the cert correctly, analyzing the cert - no problems found, etc, all looks good and then fails at "couldn't sign in Error Unknown (0x80131500)
Error type: TLSFailureException.
Not sure where to start looking or why it shows the cert is good sometimes and others not.
Also when I launch the Lync Server Admin Console, Under Topology, my edge server is showing Replication with a red X. Don't know what to look for either.Hi jackl2001,
By default, no policies are configured to support external user access, including remote user access, federated user access, even if you have already enabled external user access
support for your organization. To control the use of external user access, you must configure one or more policies, specifying the type of external user access supported for each policy.
Click on the link below for more details.
Managing federation and external access to Lync Server 2013
http://technet.microsoft.com/en-us/library/gg520966.aspx
Best regards,
Eric -
Adobe media server (edge server)
I need to have a new adobe media server to be an edge server for support more concurrents. Now, i have one server with adobe media server 3.5 . I don't know what to do the first. I have read the manual for install edge server but, i don't understand it clearly.
What's the type of license to be an edge server with compatibility with my old server.Moving to Adobe Media server.
-
DTW - Connection to server has failed
I am trying to use DTW to import to SAP B1 2007A SP:00 PL:15 and am getting a "Connection to server has failed" error message - error code 100000000008, Licence does not exist.
Ian,
Make sure the SAP license server is running. You can check this in the Service Manager running on the Task Bar. If not go to All programs > SAP folder > Server Tools > Service manager.
Also check the user id you are using to log into DTW has the license set inside SAP.
Suda
Maybe you are looking for
-
How to find out size of objects
hi, i need to draw a few objects in PS - a few rectangles and circles, and i need to draw them with precise size - width and height, but i dont know where i can find some information about their width and height (in cm or mm). once i draw them, there
-
Data control issue for content repository when running apps in webcenter .
Hi All , I have created content repository connection in my local jdeveloper and exposed it as a data control . from data control i am displaying some path and name based on some search criteria . Whenever i am runnig this application i am getting fo
-
Help!! My linked text file disappears from the links palette
I've set my preferences so that InDesign creates a link when placing text and spreadsheet files, and when I first place the file it appears in the Links palette just fine. However, as soon as I make a change in the original text file, it disappears f
-
Dreamweaver cs3 international edition crashes while "Find and Replace"
When i try to perform Find and Replace in Adobe Dreamweaver CS3 the program halts and crashes everytime. aditional info: Adobe Dreamwever CS3 international version (translated GUI) Version 9.0 Build 53 Windows Vista Pentium Core2duo 2gb ram best wish
-
Anyone help me with adding this mixer to my Logic/Duet chain?
Hey Guys, Someone gave me this mixer: http://www.mackie.com/products/1402vlz3/ Actually it's an older version but it's basically the same thing. I have never used a mixer before in my personal recordings - and I admit I don't really know what the pur