Edge swiping issues on Yoga 11?

I just got my Yoga 11 RT(refurb), but I am not sure if I am having edge swiping issues or not. In laptop mode I can swipe from the bottom right edge up(right of the windows key), but not the left. I can only swipe in that same area in other models in both landscape and portrait mode. In laptop mode I can't swipe from the top down to bring those menus up. Left and right swipe work fine in laptop and tent mode. Is this normal for this device or did I get a defected model? Thank you.

Hi,
Still the same issues.
I chatted with Windows support and they said they can fix it, but they want charge me for the premium support 149 USD.
Contacted Lenovo/IBM support, but they send me an email that they not support Yoga and I should contact Lenovo support helpline.
There is no email address to Lenovo support on the site. I will need to contact Lenovo by phone.

Similar Messages

  • [U530] Disable edge swiping?

    I want to disable right-edge swiping on my IdeaPad U530.  Nothing seems to work.  It appears to be a pretty simple procedure on other brands of PC running Windows 8.1.
    I am also finding this support site infuriatingly difficult.  I have no idea what "board" I should post this question on.  I think this type of "support" totally sucks and doesn't deserve the name "support."  End of rant.
    Moderator comment: Subject edited for visibility and clarity. Model added.

    Good day and welcome to the community.
    I've moved your post to the proper forum for you: IdeaPad Y, U, V, Z and P series Laptops
    Please keep in mind that this is a peer-to-peer support community where members share their advice and experience with Lenovo products and services. The probability of members offering advice is dependent on a number of factors: applicable experience, first-hand knowledge, and respectful discourse, just to list a few.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • HELP - Edge Animate issues - buttons/symbols not working/disappearing in portrait mode on mobile devices

    Edge Animate - Issues - buttons/symbols not working/disappearing when in portrait mode on iPad and mobile devices, but in landscape version everything is fine.
    Everything works cross broswer on Desktop - Safari, Chrome, Explorer and Firefox - mobile devices prove glichy... anyone else experience this?
    It's a regular issue of mine, particularly with complex animations. Symbols disappear
    - is it something to do with overflow?
    - responsive scaling?
    I have no idea.

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Scrolling Issue with Yoga 3 Pro

    Hi guys,
    Got myself a yoga 3 pro and i really like it! It has got a few issues though... The one currently frustrating me the most is shown in the following video:
    Scrolling Issue
    Google Chrome somehow doesn't work well on this laptop. As you can see the UI renders in funny angles, then sometimes even stays like that after scrolling. But this mostly just happens while scrolling and then when the scrolling is complete, it renders fine again, particularly on longer webpages and PDF's. Also the scrolling itself is very laggy and sometimes not responsive, although this might also be the touchpad not reacting that well - I have to say i had a macbook pro before this and that touchpad is unbeatable (the rest is **bleep** hehe).
    I couldnt reproduce the same issues on Internet Explorer (somehow no surprise, it being a windows thing and all). Firefox has laggy scrolling but almost no rendering issues of the same kind (when used heavily, it also happens though). When used heavily (high cpu usage) i even experienced this issue briefly in the windows explorer.
    Now I'm not just here to complain, as I said before the laptop is great in general, just hoping there is a solution or awareness regarding the scrolling issue.
    Thank you.
    Regards

    Haven't seen that on my Y3P, *but* I agree that the trackpad is just horrible compared with Mac trackpads, or even with the Logitech T650. As for Chrome, indeed it works OK with touch but not so great with the trackpad. In general, IE works better, looks nicer, and uses less power---but it's noticeably slower.

  • Full res retina iPad and Edge Animation issues

    OK So I have been building folios for the new iPad (retnia) and the only way I can get a full page animation built in edge to work is to build it on a stage that is half res (1024x768). If I build a full screen edge animation (2048x1536) it just shows a blank screen on that page on the iPad. Anyone have any tips on this? The folio is built at 2048x1536. So when i place a 1024x768 oam file I have to stretch it and use "scale to fit". Although the animation works like this it is not as pretty as the full res pages that follow. Ideas?

    Alright. So I did a bunch of testing. Good news is that text created in indesign looks identical in quality regardless of if the indesign file is 1024 or 2048 when using PDF as the folio format. Bad news is that images (i.e. placed psd files) look not as great. Definantly better than when i was trying to upscale in folio Automatic from 1024 to 2048 but not as good as a indesign file created at 2048.
    Wish there was a way to solve the image quality issue. Oh and of course all the Edge animations work like a charm using PDF and 1024. They still are not as sharp or high quality as Edge animations built at 2048 but at least they work.

  • Edge Animate issues in mobile and tablet devices

    I am brand new to Edge Animate, have watched several tutorials and have done research on my problem but haven't found the answer to my problem. 
    I opened an HTML (5) page in Edge Animate, and animated two items on the page.  I created a fade in for the name in the header, and I created a text slide in with some header text in the main content on the page.  The text slide in starts at 0 opacity and 20% size off page, then as it slides in it grows to full size and reaches 100% opacity.  The page (created and maintained in Dreamweaver CC) is centered in the browser window.
    Everything work great in all the browsers on a regular PC.  (I have tested on pc in Safari, and it seems to be fine there too.)  The only issues occur when viewed on an iphone 4s, ipad, (both of which have the latest version of ios) and on a kindle fire.
    On all of the above listed devices, the page starts full size, then becomes smaller, (following the 20% setting maybe???).  The name fades in fine, and once the text slides in (starting small as desired and gaining size and opacity) and completes, then the page comes up to full size.  BUT, it doesn't center the page in the browser.  I tried loading the page both in safari and on google chrome on the ipad.
    I don't know if I missed a setting in the export, or if there is something I have done wrong in the creation of the animation?  I've tried different settings, and now I am hoping to get some advice from this community.  Thank you in advance.
    If you would like to see the page, please go here demo page
    All suggestions are appreciated. 
    Thank you!

    Hopefully we will find someone with some idea of what is happening.  Fairly new program, I guess.
    My larger issue by far at this point is figuring out how I am supposed to be saving the project (existing html work) so that it stays in the page if I make changes to the page in dreamweaver.  I have watched every tutorial I can find on opening an existing html page in AE, animating a couple of elements on the page (which is very cool that we can do that!), and the odd thing is all the tutorials take you through the opening and animating, but then they don't say, "to save the project in your site folder....it just ends with animate and viola!!
    So I create the animations, save the project--which places a "publish" folder in my site root folder and when I look in the publish folder, Animate has created duplicate html pages of ALL my pages, not just the one I animated, and they are all in the "publish" folder.  If I publish the site, the animations work (but my navigation no longer does because, I believe, it is using the publish folder not the site root folder) until I make a change in Dreamweaver CC to the page I animated.  Then the animations no longer work!
    I'm obviously not saving or publishing the project correctly, but for the life of me, I have not been able to find the RIGHT way to save an existing html page in an existing site root folder...
    Thanks for the response...good luck!

  • Adobe Edge/ Muse issues

    I have made a button in adobe edge and my actions for it is to click to go to my website which is one page. The idea is that this button would act as an enter page to my web site. So it edge i have it set to go to www.thewebsite.com/home.html. Because the button page would be /index.html.  But when i bring into adobe muse it does not want to open the /home.html. it wants to stay at /index.html. so i am getting weird effects i can see only on part of my website when i click and parts of the index page with my button. Can anyone help? not sure if its a muse issue or edge issue i am having?

    I' have the same problem, somebody know how make this works?

  • Ctr0 Edge Counting Issue

    I have a PXI-6602 and am writing a C++ class to control the card. I am experiencing an issue when using ctr0 for edge counting. My setup includes one PXI-6602 and a BNC-2121. I'm using the continuous pulse signal as the source signal to the counters. My software execute the following functions in order.
    // Clear any old tasks
    DAQmxClearTask( TaskHandle );
    // Create new task
    DAQmxCreateTask( "ctr0Task",
                              TaskHandle );
    // Setup channel
    DAQmxCreateCICountEdgeChan( TaskHandle,
                                                "\CTR1\ctr0"
                                                DAQmx_Val_Rising,
                                                0,
                                                DAQmx_Val_CountUp );
    // Start Task
    DAQmxStartTask( TaskHandle );
    // Read counter value
    DAQmxReadCounterU32( TaskHandle,
                                     DAQmx_Val_Auto,
                                     10,
                                     buffer,
                                     sampsRead,
                                     NULL );
    I execute the above code and let the task run for approximately one second. I read one sample of zero (0) counts on ctr0. When I execute the same code for the other counters, I read around 464 counts, which I believe to be valid.
    Why am I reading zero counts on ctr0?
    I have tried the following:
    1) Using the Test Panel, I setup ctr0 for edge counting and used PFI39 (ctr0Source) as the source signal and everything worked as expected. So I know the hardware is working. I also selected the 20MHzTimebase signal as the source and everything worked as expected.
    2) I manually setup a task within NI-MAX and everything worked as expected.
    3) Within my software, I routed the 20MHzTimebase signal to ctr0 source and received counts although the value was incorrect. No matter how long I let the task run, I would only read around 260 counts. When routing the 20MHzTimebase to one of the other counter's source, everything worked as expected.
    4) I also routed PFI39 to the source of the other counters and everything worked as expected.
    Is ctr0 special or reserved? Does it have a unique timing characteristic that I'm unaware of?
    Thanks in advance for any help.
    -Mroche

    Hey
    There should not be any issue. I have that board and used that in lv, but try the attached code and see if this works.
    lab
    Attachments:
    Count Digital Events.zip ‏56 KB

  • Adobe edge sharpness issue

    Hey all...
    Although -considering many perfect manipulations Adobe Edge presents- this may sound like a minor issue, I wonder why the text renders a bit blury in Edge, when compared to plain HTML and CSS. I tried adding CSS 'font-smooth', even tried Chrome '-webkit-font-smoothing' hack, but it seems none has anything to do to improve the sharpness of the text.
    Any help would be appriciated.

    I have taken screenshots from each version. The top -is the plain html text, below -is th edge display.
    If you magnify the image, you can see that the HTML version uses coloured anti-alliasing pixels (maybe inherited from the background colour), whereas the Edge version uses the anti-alliasing inherited from the text colour.
    Thus, when I look from a distance, the grayscale anti-alliasing creates a perception like the text is a little bolder and out of focus. The coloured anti-alliasing seems to pull up the text more. Also you can see that the diference between the bold and plain text is far more obvious in the html version.
    If you even take a closer look, you can see the font face (in this case, Arial) is a little condensed and letter spacing is more dense in the Edge version.
    I repeat, this is 'neglectable', I just wonder the reason.

  • 3G vs EDGE signal issues in San Diego 92103

    I have perfect 5 bar EDGE and 3G reception at my house on the 5th floor of a 6 story condo building. In the past few days, the two networks are competing for attention with my iPhone, and the phone seems confused. First it will switch to EDGE from 3G, and then it will switch to NO SERVICE. Then after a while it goes back to EDGE, but never gets the 3G signal back. I've seen it do this twice during the day time. It also does it at night when I'm asleep, the reason I know is because when it switched to EDGE, my computer speakers buzz from the data interferance that the EDGE network causes with unshielded speakers and it wakes me up!
    Is it possible that the 3G and EDGE signals are so strong they could be competing on my phone? I thought the phone wouldn't even try to switch to EDGE unless it dropped down to like 1 bar? Why would my 3G signal go from perfect to none causing the phone to switch to EDGE and then loose EDGE reception?
    It seems the only fix is to reboot the phone. I called Apple today and they told me to try "reset network settings", and also try a hard reboot (hold the home button and power down for 10 seconds).
    So, I've tried these, but I doubt they will work. They also suggested I may need a new SIM card, which makes zero sense to me.
    Is anyone else having this problem, are there any fixes? Is this a hardware problem with the radio in the phone? Firmware problem with the way the phone handles the networks? Or is this a total AT&T problem?

    Maybe, but it might take a lot longer then you think! I used to live in University Heights on Adams and Oregon St, and Verizon had the same problem. Full bars one minute, no service the next. They were never able to fix it, so I had to switch to T-Mobile. To this day I think the problem still exists over there. I almost think it's TOO MUCH signal as opposed to not enough. What blows me away is just 8 blocks away from my house there is only 1 BAR of 3G signal from AT&T! I don't understand it (except here I am on the 5th floor, and 8 blocks away I was on the ground!).
    On the other hand, AT&T is sending me a replacement SIM card tomorrow, I doubt that will fix it, but who knows. I have been very impressed so far with the customer service from both Apple and AT&T reps regarding this issue.
    You get American employees who speek very good English who are friendly and want to solve your problem. Let's hope that never changes!

  • Edge Sync Issues

    Hello,
    Having an issue with not everything sync'ing in our Hub/Edge Servers. Our configuration is 2 edge servers with 2 hub transport servers.  Confirmed all SP and RU versions are the same.  We're on  2010SP2 Version 14.2.  Single AD Domain. 
    Seems like mail flow is working correctly, and when checking the test-edgesynchronization for a recipient it's always successful.
    When I run Test-EdgeSynchronization -FullCompareMode I get the results below.  When I run the Start-EdgeSynchronization -ForceFullSync everything shows success.
    I've also checked the Edge server's Best Practice Analyzer and I the ADAM LDAP port and ADAM Secure LDAP port are listening.
    Two days ago I ran a new Edge Subcscription on both Edge Servers, copied to a hub transport server and ran the New Edge Subscription.  Then ran the Start EdgeSynchronization.  The results were the same. 
    The two that don't sync are the TransportServerConfig and RemoteDomainStatus.  Should these sync and if they are not sync what's the ramifications.
    Dave Kreitel

    Thanks Frank,  Here's the Get-EdgeSynchronization |fl  from a hub transport server.
    Question about removing the Edge subscription first.  The subscription was redone just 4 days ago.  The same 2 items showed NotSynchronized.  What would another resubscription do for the issue?
    [PS] C:\Windows\system32>Get-EdgeSubscription |fl
    RunspaceId        : 541893ce-9fa4-4c59-b577-ad0b8b0f67e4
    Site              : epcc.local/Configuration/Sites/Default-First-Site-Name
    Domain            : epcc.local
    IsValid           : True
    ExchangeVersion   : 0.1 (8.0.535.0)
    Name              : SVRASCEDGE01
    DistinguishedName : CN=SVRASCEDGE01,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Gro
                        ups,CN=EPCC,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=epcc,DC=local
    Identity          : SVRASCEDGE01
    Guid              : 6596071d-7a93-4afc-a225-c811bab1250b
    ObjectCategory    : epcc.local/Configuration/Schema/ms-Exch-Exchange-Server
    ObjectClass       : {top, server, msExchExchangeServer}
    WhenChanged       : 2/11/2012 3:04:22 AM
    WhenCreated       : 9/10/2011 12:05:30 AM
    WhenChangedUTC    : 2/11/2012 10:04:22 AM
    WhenCreatedUTC    : 9/10/2011 6:05:30 AM
    OrganizationId    :
    OriginatingServer : SVRNWDC01.epcc.local
    RunspaceId        : 541893ce-9fa4-4c59-b577-ad0b8b0f67e4
    Site              : epcc.local/Configuration/Sites/Default-First-Site-Name
    Domain            : epcc.local
    IsValid           : True
    ExchangeVersion   : 0.1 (8.0.535.0)
    Name              : SVRASCEDGE02
    DistinguishedName : CN=SVRASCEDGE02,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Gro
                        ups,CN=EPCC,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=epcc,DC=local
    Identity          : SVRASCEDGE02
    Guid              : a80920b6-d6ad-4a58-9308-2bf48a3c3a7a
    ObjectCategory    : epcc.local/Configuration/Schema/ms-Exch-Exchange-Server
    ObjectClass       : {top, server, msExchExchangeServer}
    WhenChanged       : 2/11/2012 3:02:42 AM
    WhenCreated       : 9/10/2011 12:05:43 AM
    WhenChangedUTC    : 2/11/2012 10:02:42 AM
    WhenCreatedUTC    : 9/10/2011 6:05:43 AM
    OrganizationId    :
    OriginatingServer : SVRNWDC01.epcc.local

  • Lync 2013 Edge Server Issues

    Forgive me if this question sounds rather "entry level", I have never worked with Lync and this project was handed to me by my boss, who hasn't worked with Lync either.
    I have been reading various posts and forum messages until I went cross eyed about setting up Lync 2013 Edge server correctly.  I am still running into some questions and issues with the Access, Web, and A/V services starting.  Here is my main
    question, and below is my setup. 
    Question:
    Is there a need for both an external and internal nic card IF all three external IP's for the external services are programmed at the firewall and router to go directly to 1 internal IP address?
    Setup:
    Currently I have 1 FE-Standard server that also acts as the Mediation Server, and 1 Edge Server both of which are virtual and running Server 2012.  Originally I did have 2 network cards setup, as all other documentation suggested, 1 external and 1 internal. 
    However my boss, who setup the DNS/Firewall entries stated to remove the External Card since the external address that was setup for the 3 services was routed to 1 internal address. The Access Services, Web Services, and A/V services are all running on three
    separate ports with their own unique FQDN- 443, 444, and 445.  The cert that was deployed is a wild card cert from GoDaddy, this has been used by other servers that point inside and outside without issues.  
    Issues and Errors Messages:
    I have run into a few different issues and error messages from the Event Viewer:
    System
    Provider
    [ Name]
    LS Protocol Stack
    EventID
    14352
    [ Qualifiers]
    50153
    Level
    2
    Task
    1001
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2013-09-09T15:44:51.000000000Z
    EventRecordID
    2885
    Channel
    Lync Server
    Computer
    edgesvr01
    Security
    EventData
    0xC3E93C0A
    SIP_E_STACK_TRANSPORT_FAILED
    System
    Provider
    [ Name]
    LS Server
    EventID
    12303
    [ Qualifiers]
    50152
    Level
    2
    Task
    1000
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2013-09-09T15:44:51.000000000Z
    EventRecordID
    2884
    Channel
    Lync Server
    Computer
    edgesvr01
    Security
    EventData
    80072741
    The requested address is not valid in its context.
    System
    Provider
    [ Name]
    LS Protocol Stack
    EventID
    14336
    [ Qualifiers]
    50153
    Level
    2
    Task
    1001
    Keywords
    0x80000000000000
    TimeCreated
    [ SystemTime]
    2013-09-09T15:44:51.000000000Z
    EventRecordID
    2883
    Channel
    Lync Server
    Computer
    edgesvr01
    Security
    EventData
    TLS
    external IP address that is now used now
    5061
    Please help, I am at a loss as to where to go from here.

    Thanks for the quick responses. 
    I have re-enabled the external NIC.  All services are running now.  When I ran the Remote Connectivity tester this was the outcome.
    Testing remote connectivity for user: username@domain... to the Microsoft Lync server.
     Specified remote connectivity test(s) to Microsoft Lync server failed. See details below for specific failure reasons.
    Test Steps
    Attempting to resolve the host name lync.metisconnect.com in DNS.
     The host name resolved successfully.
    Additional Details
     IP addresses returned: xxx.xxx.xxx.xxx (external address)
    Testing TCP port 443 on host: host fqdn to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server host fqdn on port 443.
     The Microsoft Connectivity Analyzer successfully obtained the remote SSL certificate.
    Additional Details
     Remote Certificate Subject: CN=*.ourdomain.com, OU=Domain Control Validated, Issuer: SERIALNUMBER=######, CN=Go Daddy Secure Certification Authority, OU=http://certificates.godaddy.com/repository, O="GoDaddy.com, Inc.", L=Scottsdale, S=Arizona,
    C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
    Additional Details
     The host name that was found, lync.metisconnect.com, is a wildcard certificate match for common name *.ourdomain.com.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
    Test Steps
    The Microsoft Connectivity Analyzer is attempting to build certificate chains for certificate CN=*.ourdomain.com, OU=Domain Control Validated.
     One or more certificate chains were constructed successfully.
    Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate OU=Go Daddy Class 2 Certification Authority, O="The Go Daddy Group, Inc.", C=US.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
    Additional Details
     The Microsoft Connectivity Analyzer can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
    Additional Details
     The certificate is valid. NotBefore = 7/31/2013 4:02:03 PM, NotAfter = 7/31/2014 4:02:03 PM
    Testing remote connectivity for user username@domain to the Microsoft Lync server.
     Specified remote connectivity test(s) to Microsoft Lync server failed. See details below for specific failure reasons.
      Tell me more about this issue and how to resolve it
    Additional Details
     Couldn't sign in. Error: Error Message: Operation failed because the network connection was not available..
    Error Type: ConnectionFailureException.
    External calls from a 3g/4g data connection are not connecting when using the Lync call feature to an internal users Lync Client.  Outcome is: Connecting Call and No Audio.  Then call ends.

  • Adobe Edge memory issues

    Hi,
    May I refer you to this issue I posted in the Muse forum. The post was marked as answered and consequently is receiving no attention. There is an issue when working with Muse and Edge, and by the way, Photoshop. The application used after Edge always crashes.
    Muse doesn't like edge...

    Hi David,
    After further investigation with your animate files, it appears that they appear as expected when you view them in the browsers. I tried Firefox, Chrome, and IE 11. The poster image does still look distorted in Muse's Design view. Have you seen what the poster image is when you export the OAM file? You can try clicking the camera button again to take another photo, and then publish the OAM. That may help create a more accurate image of what is being shown.
    That's interesting that if you use Edge then Photoshop you also crash Photoshop. Have you tried asking the Edge team about this problem? It sounds like it may be also an Edge issue. I'll keep trying to investigate why Muse is crashing, but as of now I'm still unable to reproduce this with my Windows 7 machine. Does this crash happen every time you switch from Edge to Muse/Photoshop or intermittently?
    Thanks,
    Dana

  • Refine edge tool issues

    Hello, my refine edge tool isn't working for me properly. When I select the radius brush, smart checked or unchecked, it turns my selection gray instead of pulling detail and removing background. It does this no matter the size of the radius brush and I really need to get these images done asap. I'm new to photoshop and major in LR. Any quick advice would be greatly appreciated!

    I'm struggling to think of a set of circumstances that would cause that.  Maybe if you had an underlying layer filled with grey, and a very high feather value in Refine Edge...
    It would be helpful if you were to upload a screen grab of your image an workspace showing the Layers panel.  Best to open your History panel as well.
    But probably a good idea to try resetting Preferences before getting too involved with other stuff
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • Edge Suite issue with Scale to Fit composition

    Having problem with this WordPress based site. As you can see, the composition is not appearing. It used to be, but then I tried Sarah Hunt's tutorial on Scale to Fit comps. The tutorial seems to work fine....except on WordPress sites. At least using the Edge Suite plugin to upload .oam's. It's mentioned in Sarah's tutorial but there was never a resolution. So I brought it over here to the main Adobe Forums and hopefully I can get an answer as to why my comp isn't displaying.
    The files for this preso are here: https://www.dropbox.com/s/v6w8x0zl0cln5wi/flowshot.zip
    Any help on making this work, er, uh, fit, would be great.

    Tried that as well, to no effect. Now I get no Edge comp on the page at all. Just blank. Although the code says otherwise
    <div id="featured" class="grid col-940">
    <div style="width:1px; height:auto"><div id="Stage" class="EDGE-6453776">
    <script type="text/javascript">window.AdobeEdge = window.AdobeEdge || {};window.AdobeEdge.pathPrefix = window.AdobeEdge.pathPrefix || {};AdobeEdge.pathPrefix.libs = 'http://flowcommunications.com/wp-content/uploads/edge_suite';AdobeEdge.pathPrefix.comps = AdobeEdge.pathPrefix.comps || {};AdobeEdge.pathPrefix.comps['EDGE-6453776'] = 'http://flowcommunications.com/wp-content/uploads/edge_suite/project/flowshot_5';</script>
    <script type="text/javascript" src="http://flowcommunications.com/wp-content/plugins/edge-suite/includes/edge-wordpress.js"></script>
    <script type="text/javascript" src="http://flowcommunications.com/wp-content/uploads/edge_suite/project/flowshot_5/flowshot_ed gePreload.js"></script>
    <div id="Stage_flowshot_5" style="height:200px;width:960px;margin: 0px auto;margin-top:10px;" class="EDGE-6453776"></div>
    </div></div>
    <p style="color: #FFF; font-family: "myriad-pro",sans-serif;"><strong>Hello! Welcome to our new site, on a new server.<br>Pardon our dust. It’s still under construction.<br>Thank you!</strong></p>
    </div><!-- end of #featured -->

Maybe you are looking for

  • L/R channels reversed on headpho

    Hey all, I'm a bit of a newb here, so bear with me. I'm having a problem that's driving me nuts. I have a Audigy 2 ZS Platinum. When I plug my pair of Sennheiser HD 580 headphones into the headphone jack on the front panel, the left and right channel

  • How do I get rid of this latest download:  reading list?

    All of a sudden I have a reading list symbolized by an icon of eyeglasses.  I don't want it.  What do i do to get rid of it?

  • Need protected files and a .pdf proof in InDesign

    Im fairly new to InDesign and have just completed an announcement and have it saved.  Now, I am wanting to create a .pdf to submit to someone else to look at it, but I dont want them to be able to edit it at all (like a proof).  So, does that mean th

  • LOV with display Items

    Hello, i am very much New to Forms 6i Please tell me that, can we attach a LOV with a 'Display Item' ..??

  • Server very slow

    i have a database wiht following configuration. My procedure is taking about 2 hours Shared Pool: 2000 MB Buffer Cache: 128 MB Large Pool : 0 MB Java Pool : 80 MB Total SGA: 2223.568 MB SGA Max Size : 4000 MB Aggregate PGA Target : 300 Mb Current PGA