Edge Tools versus Flash Tools

I created an educational website years ago that is comprised of about 98% Flash files. I am looking to revise it in a tablet compatible format. I have the trial version of Edge Animate, which I understood was the future replacement for Flash. However the Tools of Edge are almost non- existent. It appears that there isn't even a tool to draw simple straight lines (which I use for leadlines on labeled objects). How are former Flash users getting around this major drawback of Edge?
Thanks for any suggestions.
Ray

I checked - Flash CS6 does not have a new File choice of "HTML5 Canvas". In my effort to revise my website it was my original intention to create new documents using the tools provided in  Edge. Unfortunately, those tools are very limited and don't address many of my needs. A good example is there is no tool in Edge to draw straight lines. I label a lot of images at my website and have to draw a straight line (called a lead line) from the text of the label to a point on the image - can't do that within Edge itself like you can within Flash. Interestingly, I have been following the Animate Team Blog and someone else also commented about the inability in Edge to draw simple straight lines. I hope that with time the Toolbox of Edge will be ungraded to be comparable to that of Flash.
I'm still experimenting with Edge. Do you use it a lot? If so, in your opinion is it destined to be a primary development tool for websites like Flash is?

Similar Messages

  • MSI Forum HQ USB flashing tool!!!

    Hi guys,
    We the forum team have developed  a new way of flashing.
    You no longer need a floppy or anything, just an USB-stick.
    The tool has been tested together with MSI and as far as we have done our testing, there are no problems at all.
    As long as the USB-stick is FAT or FAT32 formatted!
    However, flashing is allways risky, so if it goes bad it's your own fault, but that goes for all flashing you do.
    This tool is intended to flash MSI retail motherboards and laptops,
    but if needs you can use any other machine to prepare the necessary stuffs and the USB stick there,
    before move the USB stick to the msi product that you want to flash.
    The way it works is simple: Download the package and download the BIOS from the MSI website that you want to flash.
    The rest is straight forward.
    Make sure that your board is set to be able to boot from USB.
    So turn on USB Legacy Support in the BIOS.
    Boot and press F11 to get the boot-popup and select your USB-device to boot.
    (some boards have a different key, like K8N Master uses ESC for the boot-menu)
    What ever you do, make sure you read all warnings!
    The forum nor MSI is responsible if it fails for you.
    Nor is this software supported by MSI technical support!
    Please report problems/buggs if you find them.
    currently supported OS ( both 32 & 64 bit):
    Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, Windows 7 (also Windows in Virtualbox under Linux!)
    (all kind of versions)
    NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
    This topic is for discussion of and help with the USB flash tool only. If you have a problem with your PC and need help then do not hijack this topic, please start your own new topic in the correct area of this forum!
    NEW! >>> Read the comprehensive user guide here! <<<
    The download links are listed below:
    https://www.dropbox.com/s/yu8imcr1tsopm24/MSIHQ%20Tool%201.26h%20Installer.rar?dl=0

    Quote from: max-sever on 25-May-07, 01:29:21
    Hi!
    I'm have problem with antivirus program too.
    Dr.Web
    C:\Temp\x863\bossmsi.exe - &#1080;&#1085;&#1092;&#1080;&#1094;&#1080;&#1088;&#1086;&#1074;&#1072;&#1085; Trojan.Blakhal
    Kaspersky Anti-Virus
    bossmsi.exe - &#1080;&#1085;&#1092;&#1080;&#1094;&#1080;&#1088;&#1086;&#1074;&#1072;&#1085; Backdoor.Win32.Iroffer.af
    This file is a antivirus testing program?
    Hi Max,
    "This file is a antivirus testing program? "
    yes, the latest version accidentally really become a test for any AV....
    in latest 1.13b Avast! no more report false positive,
    but all others AV software starting reporting a different false positive results:(all AV listed didn't report false positive problem in a provisional version) Avast! was fixed and no more report the false passivity and passed, but all other AV software started to be a lot confused...
    Kaspersky Anti-Virus - Proactive Defense Warning: Riskware detected.
    Kaspersky Anti-Virus 2nd ID - Backdoor.Win32.Iroffer.af
    Dr Solomon's:  probably found Zafi.D.Virus
    Symantec: Bloodhound.Overpacked / * Overpacked when a potentially unknown virus is found using Symantec Bloodhound technology */
    Panda: Win32:Trojan-gen.(Mytob.U.Mod)
    Mcafe: Worm.W32/Bakain
    Dr.Web: Trojan.Blakhal
    Bit.Defender: Trojan.JS.Obsq.Gen
    Just to clarify one more time, all things listed are false alert coused and exist in latest version only due Avast! fix.(1.13b)
    didn't continue to test with rest of AV...
    only Avast! and NOD32 report no problem detected.
    in 1.13a all false positive listed above doesn't exist, but only Avast! report false positive.
    Hoverer, the wave of false positive mess has been resolved along with Avast! false positive as well.
    New version is ready, 1.13c:
    - fixed false positive wave which confusing most of AV software. (all AV do not report any problems anymore)
    - fixed 3 minor bugs:
           * after finished work the tool do not quit normal as expected and hang instead, that happend in x32bit OS only when used has been asked for reboot and answered with "No". e.g. in described specified case.
           * 4th mainboard filter report positive results in some Biostart mainboard and this cause tool to false ID some Biostar board as MSI one.
           * added missing drive letter as USB key choice ("I")
    Download location in a the 1st post of this topic.

  • User guide: MSI HQ USB BIOS Flash Tool

    Guide based on USB tool v1.17c
    HOW TO properly use the MSI Forum HQ USB Flashing Tool to update your BIOS
    This user guide provides a step-by-step explanation for properly using the >>MSI Forum HQ USB Flashing Tool<< to prepare a USB Flash Drive for a safe BIOS-Flash in a pure DOS Environment. The tool itself will not perform the actual flashing operation.  It will "only" help you to get your USB Stick set up for an automated DOS flashing procedure which requires final confirmation.  (If you should run into any problems before you are prompted for final confirmation in DOS, no attempt to flash has been made yet and there is no danger of a bad flash.)
    NOTE: If you are having problems getting your USB device to boot correctly, you may need to format it correctly as the geometry data may be incorrect. You can do that by pickup option "Fix My USB key" from the Tool or by using >>> THIS <<< tool here! For future usage you can skip this step, it need to be done only once if your stick need adjustment.
    Symptoms that your USB key need a fix after booting from the USB key:
    * Error: "No bootable partition in table"
    * Blinking cursor in a top left corner and nothing happens
    * "RIVER2 MSI"
    * "Error loading operating system"
    * "Missing operating system"
    * "Disk in drive is not a bootable"
    * Booting from selected USB key is IGNORED, the other/typical OS continue to load as usual
    If still no change after using "Fix My USB key" Tool's option or HP Formatter Tool as alternative.
    Then try with different USB key, the issue is there.
    Note: Those USB keys who support "U3 Smart", this "feature" must be removed before proceed.
    Refer to followed link: http://u3.sandisk.com/launchpadremoval.htm
    Read the three notes that follow first before you move on:
    1. Note: Before you even think about flashing a different BIOS, be sure that your system is stable. If it is not stable, make it stable first. (Read >>here<<.)
    2. Note: Make sure your system meets the preconditions and system requirements mentioned below before you attempt to use the tool.
    3. Note: Do know that flashing your BIOS, be it with the help of the tool or otherwise, is done at your own risk.
    Contents of the Guide:
    0. Preconditions & System Requirements
    1. Basic Description of Functionality
    2. Installing/Starting the tool.
    3. Choosing a Preparation Method
      3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
      3.2. Method 2: Processing a BIOS File Directly
      3.3. Method 3: SureHands Live Update
      3.4. Method 4: Geometry Change
    4. Selecting the USB Flash Drive for preparation
    5. BIOS Settings, Booting & Flashing
      5.1. BIOS Settings to Check
      5.2. Booting from USB Flash Drive
      5.3. Flashing Procedure/Running MemTest86+ & CMOS-Clear
    6. FAQ: Common Problems & Solutions
    7. Version History
    0. Preconditions & System Requirements
    The main precondition for using the tool is a working & healthy Windows installation on the system that needs the BIOS flash.  The Tool is designed to work with MSI Retail Boards & Laptops only.
    Please note mainboards of other brands and OEM boards that are manufactured by MSI but sold by Medion, HP, NEC and others are not supported. If you have an OEM board that needs a BIOS update read this topic: >>OEM boards manufactured by MSI<<
    Supported Operating Systems: All current Windows Versions (32bit & 64bit, any service pack (SP)): Windows NT, Windows 2000, Windows 2003, Windows XP, Windows Vista, and Windows 7.
    The second requirement is that you have a fully functional USB Flash Drive that uses the FAT file system (FAT/FAT32).  NTFS is not supported. If your USB Flash Drive is using the NTFS File System, reformat it to FAT or FAT32.
    As the tool also provides a Live Update Option ("SureHands"), you'll need a working internet connection if you want to choose this method. Not all boards are supported at this point.*
    * Check section 3.3 of this guide to see if your board is currently supported by the SureHands feature.
    1. Basic Description of Functionality
    The MSI Forum HQ USB Flashing Tool will help you to easily prepare an USB flash drive for an automated BIOS flash in a pure DOS environment, which is the safest way to perform such a procedure. The tool will also allow you to run MemTest86+ in a pure DOS environment. However, the preparation of your USB Stick is done in Windows and basically includes two steps:
    (1) The device will be made bootable.
    (2) All necessary files (incl. BIOS file, actual flasher and MemTest86+ executable) and all DOS commands that are needed to flash/test memory will automatically be implemented.
    Because the tool does not reformat your USB Flash Drive*, no files that may currently be on the stick will be lost during the procedure.  Just make sure that there is still some free drive space, otherwise there will not be enough room for the files that are needed for BIOS Flashing.
    * Excluding the Geometry Change method which will destroy all data on the USB storage device.
    2. Installing/Starting the tool
    Treat the forum's USB Flashing Tool like a regular application.  Download it to and run it from your hard drive, there is no need to copy & start it from the USB Flash Drive that you want to use for flashing.  Both, the installer version and the stand-alone version, do precisely the same job.  Which of the two versions you use, is solely up to you and your preferences.  The stand-alone version can be started directly by clicking on the executable file.  The installer version will perform an installation and provide you with an entry in your start menu and a desktop shortcut to start the tool.
    When you start the tool a DOS box should open up to provide you with status messages and prompts.  Do not close that box unless you want to abort the preparation procedure!
    Please ensure that you connect the USB flash drive you wish to use before starting the Tool!
    NOTE: If you do not connect your USB storage device before starting the tool, or the tool doesn't detect it. You can still insert the drive letter, as the tool will continue as normal.
    The tool will first check, if an MSI mainboard is installed in your system and show you its model name and PCB Version in a message box. Click >OK< to continue to choose the tool's preparation method that you want to use to prepare your USB Flash Drive.
    3. Choosing a Preparation Method
    If your MSI Retail Board is properly detected and you have pressed the >OK< button in the message box, an option box will pop up that allows you to choose between three different operating modes.  The options you can choose from are more or less self-explanatory, however, read the detailed description if you are unsure how to proceed at this point:
    3.1. Method 1: Processing a BIOS Archive Directly (ZIP/RAR)
    Official MSI BIOS-Updates that can be downloaded from the product site of your board model do usually come as .ZIP or .RAR archives that contain the actual BIOS File and the corresponding AWARD or AMI flashing utility (depending on the BIOS Type of your board).  If you have downloaded such an archive, you should choose the first method from the option box. 
    You do not need to extract the files from the BIOS archive.  The tool will ask you to point it to the archive you downloaded and automatically extract the BIOS File and the AMI or AWARD flashing utility and put it them on your USB Flash Drive.  You don't have to worry about anything else.  All you have to do is to remember where you saved the ZIP or RAR file you downloaded:
    3.2. Method 2: Processing a BIOS File Directly
    If you do not have a ZIP or RAR archive that already contains a BIOS File and the proper flashing utitility, but only the plain unpacked BIOS File, choose the second Method from the option box.  In most cases BETA BIOS Files supplied by MSI Support or shared here in the Forum do not come with the proper flashing utility.  If the MSI Forum HQ USB Flashing Tool is told to process a plain BIOS File, it will automatically check the type of BIOS File (AMI or AWARD) and then select the proper flashing utility that needs to be used.  All you need to do is point the tool to the BIOS-File that is supposed to be flashed:
    3.3. Method 3: SureHands Live Update
    "SureHands Live Update" is the third operation method you can choose from the option box.  It provides a much safer and more reliable alternative to MSI Live Update as the actual BIOS Flash is performed in a pure DOS environment as well.  If you decide to use this option, you do not to supply the tool with a BIOS-Archive or a BIOS-File.
    Not all MSI Retail Boards are currently supported.  With every update of the USB Flashing Tool more boards will be added.  At present, you can use the "SureHands" Live Update method with the following boards only (the list will be updated regularly):
    AMD based boards:
    K8N Neo4-F (MS-7125, PCB 3.0)
    K8NGM2-FID (MS-7207, PCB 2.0)
    K8N Diamond Plus (MS-7220, PCB 1.0)
    K8N Neo3 (MS-7135, PCB 1.0 & 2.0)
    K9A Platinum (MS-7280, PCB 1.0)
    K9A2 Platinum (MS-7376, PCB 1.0)
    K9A2 CF-F (MS-7388, PCB 1.0)
    K9N Neo-F (MS-7260, PCB 1.0 & 2.0)
    K9VGM-V (MS-7253, PCB1.0)
    K9N2GM-F V2 (MS-7509, PCB 1.0)
    K9N Neo V2 / V3 (MS-7369, PCB 1.1)
    K9N Platinum & K9N SLI Platinum (MS-7250, PCB1.0)
    K9N2 Diamond (MS-7375, PCB 1.1)
    K9N2 SLI Platinum (MS-7374, PCB 1.1)
    K9N2 Zilent (MS-7374, PCB 1.1)
    K9N2 Neo-F (MS-7511, PCB 1.1)
    DKA790GX Platinum (MS-7550, PCB 1.1)
    790FX-GD70 (MS-7577, PCB 1.0)
    790GX-G65 (MS-7576, PCB 1.0)
    Intel based boards
    HydroGenX48C & X48C Platinum (MS-7353, PCB 3.0)
    X48 Platinum (MS-7353, PCB 1.0)
    X38 Diamond Plus
    X38 Diamond (MS-7353, PCB 1.0)
    X38 Platinum (MS-7353, PCB 1.0)
    EFINITY-FP (MS-7395(E), PCB 1.0)
    P35 Neo Combo-F (MS-7365, PCB 1.0)
    P35 Neo2 Series (MS-7345, PCB 1.1)
    P35 Platinum (MS-7345, PCB 1.1)
    P35 Neo-F (MS-7360, PCB 1.0)
    G33 Platinum (MS-7345, PCB 1.1 & PCB 1.2)
    P965 Platinum (MS-7238, PCB 1.1)
    975X Platinum PowerUp Edition (MS-7246, PCB 2.1)
    865PE Neo2-P Platinum Edition (MS-6728, PCB 2.0C)
    P7N SLI Platinum (MS-7380, PCB 1.0)
    P7N2 Diamond (MS-7523 PCB 1.0)
    P7N Diamond (MS-7510, PCB 1.0)
    P7N SLI Platinum (MS-7380, PCB 1.0)
    P6N Diamond (MS-7320, PCB 1.0)
    P6N SLI Platinum (MS-7350, PCB 1.0)
    P6N SLI-FI (MS-7350 PCB 2.0)
    P6N SLI V2 (MS-7346 PCB 1.0)
    ECLIPSE SLI (MS-7520, PCB 1.0)
    ECLIPSE Plus (MS-7566, PCB 1.0)
    P35 Neo3-F (MS-7395, PCB 1.0)
    After selecting "SureHands" from the option box, the tool will automatically check for all available official BIOS-Versions for your mainboard.  It will also look for the latest available BETA BIOS Version for you board and save that information in a TXT-File on your Desktop:
    Note: The SureHands option will not provide you with the latest BETA BIOS, it will only provide the information.
    When the tool is done scanning for official BIOS releases for your board, it will give you the possibility to manually choose the BIOS Version you want to flash.  SureHands Live Update will not automatically select the latest version and use it for flashing, it will give you the chance of choosing between all available official BIOS releases that are available:
    Note that the "May not exist" comment that appears behind some versions does not mean that the BIOS does not exist.  If you know the latest BIOS for your board is e.g. v1.8, SureHands will retrieve it even though there may be such a comment.  That message is part of a prediction feature that tries to determine future BIOS Releases.  If a BIOS version that was predicted by the SureHands feature is not available yet, the tool will tell you if it cannot retrieve the files and ask you to select an earlier version.
    3.4 Geometry Change
    If the tool fails to make your USB storage device bootable then you will need to use this mode. It will make your drive bootable, select it:
    Select your drive then let the tool do it's business.
    Once the process is complete, run the tool again via method 1, 2 or 3, restart your computer and try booting from the USB storage device again.
    NOTE: This method will destroy ALL data on the USB storage device!
    NOTE: This method is available in v1.17 and beyond.
    4. Selecting the USB Flash Drive for preparation
    When you have chosen one of the three methods from the option list and pointed the tool at the corresponding archive, BIOS File or selected the desired BIOS Version from the list in case you chose to use SureHands Live Update, the MSI Forum HQ USB Flashing Tool will prompt you to enter the drive letter of the USB Flash Drive you want to use for flashing:
    Note that certain drive letters are reserved and will therefore not be accepted by the tool (currently A:, B: and C:). If you are sure you have connected an USB Flash Drive to the system that works properly but it does not appear in the table that appears in the DOS box, enter the corresponding drive letter anyway and see if the tool accepts it.  This can happen in rare cases, but it is usually no problem.
    The tool will check the selected drive and will provide you with status messages.  If everything is okay, the message should look like this:
    The tool will attempt to make the device bootable and automatically write all files that are needed for flashing to the drive to prepare it for flashing.  If the procedure was successful, you will get the following message in the DOS box:
    5. BIOS-Settings, Booting & Flashing
    If the Tool has prepared your drive for booting & flashing, no BIOS flash attempt has been made yet. Only the preparation process. In order to initiate the flashing procedure, you have to restart your system and make it boot from the USB Flash drive. Before you move on to do that, enter the BIOS Setup and check a few options:
    5.1. BIOS Settings to Check
    Check USB-related Options in BIOS:
    - USB Controller
    - USB 2.0 Controller
    - USB Legacy Support
    - USB Storage Support
    - Boot from other devices
    - etc.
    Not all of these options may be found in BIOS and the precise name may vary as well.  Just make sure you checked for such options and that they are enabled (if present).
    Another option you should check for is "Boot Sector Protection".  If such an option is present in your BIOS, make sure it is disabled because it may make a BIOS Flash impossible.
    @all Overclockers: In case your system is currently overclocked, make sure you roll back to default clock and voltage settings before you attempt to start the flashing procedure. Otherwise you increase the risk of an unsuccesful flash, and you most probably don't want something like that to happen.
    5.2. Booting from USB Flash Drive
    To boot from your USB drive you can either change the boot sequence in BIOS accordingly or just press F11 during POST* to get access to the BIOS Boot Menu.  From here, you can select you drive directly without having to adjust the boot sequence in BIOS.  Note that your USB Flash Drive may be listed as a hard drive (if you choose that entry you will get another list to choose from).
    * Not all mainboards use F11, for the boot menu. If F11 fails for you, please consult your manual for the correct key.
    Note: If you have problems booting from your drive, look at the FAQ-Section of this guide and see if any of the tips resolve the issue.
    5.3. Flashing Procedure/Running MemTest86+
    As soon as the system boots from the drive, DOS will be loaded and you will be displayed with two options. One option will start MemTest86+, the other will begin the flashing procedure. If no choice is made, MemTest86+ will automatically start.
    The flashing procedure will automatically be initiated from there.  You will see status messages on the screen that will supply you with information and also prompt you for final confirmation for the actual BIOS-Flash.  A backup of you current BIOS will automatically be saved to a file on the drive (backup.bin) before the flashing actually starts.  You do not need to enter any commands in DOS.  All you have to do is acknowledge the information on the screen by pressing a key.
    The flash itself will only take a couple of seconds (20-30s at the most).  If the flashing is successfully completed, shutdown the system and clear CMOS with main A/C power cable removed from PSU.  Read the >>Clear CMOS Guide<< for further information. 
    After clearing CMOS you have completed the BIOS-Flash. 
    Guide created by Jack The Newbie and the forum team

    Version updated to 1.18x:
    * Mode 3 Sure Hands, Live Update:
    - Removed beta BIOS query check[global]
    - Fixed issue K9N2 Diamond unable to be detected as supported unit if onboard is installed BIOS version 2.4,
     add dynamic detection for future versions.
    - Fixed issue 790FX-GD70 unable to be detected as supported unit and add dynamic detection for future versions.
    - Fixed issue 790GX-G65 unable to be detected as supported unit and add dynamic detection for future versions.
    - Add support for 785G-E65, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
    - Add support for 785G-E53, add dynamic detection for future versions, prediction BIOS range 3.1 - 3.A
    - Add support for 790GX-G65 Winki ED, prediction BIOS range 2.1 - 2.A
    - Fixed issue P7N Diamond unable to be detected as supported unit if onboard BIOS installed is 1.3 and above,
     add dynamic detection for future versions.
    - Add support for K9A2 Neo2, prediction BIOS range 7.4 - 7.D
    - Add support for 790XT-G45, prediction BIOS range 2.2 - 2.B
    - Add support for 770T-C45, prediction BIOS range 8.4 - 8.D
    - Add support for 770T-C35, prediction BIOS range 8.4 - 8.D
    - Fixed issue K9A2 Platinum[V1,V2] unable to be detected as supported unit if onboard BIOS installed is 1.9,
     add dynamic detection for future versions, prediction BIOS range extended to 1.F0
    - 790GX-G65 board prediction BIOS range extended to ver: 1.D0
    - 790GX-G65 board update bios base ver from 1.xx to 4.xx [following new msi rule for this board jumping from 1.xx to 4.xx]
    - Add support for 770-C35|C45 boards [p1] BIOS range 1.40 - 1.D0
    - Add support for 770-G45 board [p2] BIOS range A10 - AA0
    * Add "Exit" option to navigation screen
    * Update version info related to boot part
    * Update boot part to handle newest features
    * Modify Self update sequence of Installer version
    * Update internal version check ID
    * Mode 4 minor update
    * Build and add new Tool's module for newest features
    * W32 Tool's exit time part decreased by 10 seconds
    * On received OS reboot user request, time delay before execution decreased by 15 seconds
    * Update EC decoder
    * Update start-up information screen
    * Auto store start-up detected information to user's desktop ==> [MSIHQ_INFO.TXT]
    Details:
    Easy to show machine information on request, instead write down from the screen manually, now just copy/paste can be used from MSIHQ_INFO.TXT
    User can check and compare information before and after the BIOS update
    Also usefull if didn't remember what was his original BIOS or EC versions before the update, Tool will auto store it there.
    And easy can be checked if needs. E.g Tool's log file of each Tool's execution, each report will include date and time as well.
    F.A.Q example:
    Q: I flashed BIOS on my notebook and now it doesn't work properly.. And i don't remember what was my old BIOS version.. What can i do?
    A: Take a look in MSIHQ_INFO.TXT at your desktop, there is auto recorded your detailed information about your notebook before the BIOS update.
    So you can easy find what was your original BIOS & EC versions.
    Is it OEM one or not, and the exact original BIOS & EC versions.
    So you can roll back easy or if crossflashing were done to reflash to correct versions.
    Example question:[this board now use 4.xx bios, but don't have time to make a new images.]
    It's just example, do not mean that this BIOS used in the example is bad. But generally often can need to roll back to older version.
    Or to use Sure Hands because[The BIOS is N/A for manual download, By SureHands no need to browse/search/download and point to the BIOS version, also eliminate any chances to pickup the wrong BIOS, and not at last its more quickly[save a time]]
    Q: I flashed my BIOS via MSI Live Update, but the new BIOS has an issues.
        How i can roll back to my old BIOS version?
        The MSI LiveUpdate can only update to the latest BIOS version, which is not good for me.
        And i can't download my old BIOS version manually... Because "This BIOS can only update via Live Update function"
        http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1739
        How i can re-flash to my original BIOS version and from where can i get it?
    A: Run >>Use the MSI HQ Forum USB flasher<<,
    then choose Mode 3 [Live Update{aka SureHands}]:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:09:45,15
    Mainboard:  790GX-G65 (MS-7576)       
    PCB Version:  1.0
    BIOS Version: V1.3
    BIOS Date:  05/08/2009
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at 21:22:38,42
    Mainboard:  790GX-G65 (MS-7576)       
    PCB Version:  1.0
    BIOS Version: V1.6
    BIOS Date:  11/30/2009
    Then choose your old BIOS version from the list:
    The followed image used below is a sample from Eclipse board,[no time to make accurate image] but will look similar for others boards too:
    In a list will be noticed that there is a future BIOS versions.
    Some of them will be not released yet. If you pick some of those the Tool will note you:
    It's a part of Tool's BIOS prediction system called "Crystal Ball", when MSI release a future BIOSes for your board,
    Tool can find them immediately. By that way the Tool no need to be updated to be actual in each moment
    * Add new feature "True BIOS Version Ready"
    - Updated Mode 1
    - Updated Mode 2
    - Updated Mode 3
    Details:
    Q: What "True BIOS Version Ready" means? Does the Tool show the wrong BIOS version until now? 
    A: Of course not, the Tool always show accurate info.
    The same as CPU-Z/Everest of whatever other Tool.
    However Tool also detect EC-FW versions for notebooks:
    The "True BIOS Version Ready" Tool's feature is aimed to eliminate user's mass confusion about MSI BIOS versions.
    And not only users are confused, but MSI's Live Update is confused too... which confuse users even more..
    Few typical real examples of confusion:
    "K9A2 CF wont flash to Bios v. 1.A !!!" 
    Quote from: Fingon on 25-October-09, 16:53:15
    Hi MSI,
    I have a problem. I have bought a new processor: AMD Phenom II x545. I looked on the support page of my MB (MSI K9A2 CF) and there the CPU is supported from the bios version 1.A. So I wanted to flash the Bios the the newest version (1.A). I used the MSI live update 4 program to flash it via windows mode. But everytime it boots it writes "CMOS checksum BAD", then I hit F1 to Bios and I see the version of my BIOS fell to the oldest version 1.1. Then I tried to flash it thru Flash disc (with boot files) and dos mod. The result is the same. I can flash my MB to version 1.8 but when I try the 1.A it wont flash it and my Bios fell to the oldest version (1.1). I realised that the exe files in version 1.1-1.8 are the same (afud412.exe) but the exe file in 1.A is different (afud4310.exe).
    My questions are:
    1) How to flash my MB to the version 1.A ?
    2) Is version 1.A really needed for AMD Phenom II x545? I guess yes, because CPU was avaible in July 2009 and the bios 1.A went out in June 2009. I am able to flash it only to version 1.8 (december 2008).
    Thank you for any help!!
    EDIT: After reading this topic: https://forum-en.msi.com/index.php?topic=129204.0 I realised I have the VERSION 1 of this board (I purchased it right after the launch of the MB (November 2007). It means it doesnt support CPU over 95W, but my Phenpom II x545 has only 80W. I still cant update Bios to the 1.A version.
    So my third question is:
    3) Is the Bios update 1.A only for version 2 of this MB?
    Thx for replies!
    Quote from: Jack t.N. on 25-October-09, 17:16:16
    A CMOS Checksum error is normal and expected after a BIOS Flash and/or a CMOS Clear.  The fact that this message appears, shows, that there was actually something programmed to the chip.
    If you haven't done that yet, please clear CMOS with the main A/C power cable removed from your PSU and load "Optimized Defaults" in BIOS Setup.
    The BIOS Version should be shown on the POST Status Screen and there should be a date behind it.  Please check the BIOS Date and write it down:
    Are you absolutely and entirely sure that what you see is "1.1" and not "1.10"?  Because v1.A0 is actually just the hexadecimal notation for v1."10" (one dot ten).  The hexadecimal notation is only used in the BIOS File Ending.  Once flashed, the BIOS will not identify itself in hexadecimal notation but in decimal code (which means you will never see "v1.A0" after the flash but "v1.10" instead.
    Here is a piece of well-meant advice for now and the future:  MSI Live Update should be avoided under all circumstances when it comes to BIOS Updates and/or information retrieval regarding your current BIOS Version.  Why?  Because this tool is stupid and one of there most risky applications for performing a BIOS Flash.  Please uninstall it completely.
    Why do I call it stupid?  I call it stupid because it does not differentiate between hexadecimal notation and decimal notation.  It will show you that "v1.A0" is available.  The it will flash it, if you allow it to do so.  Of course, a v1.A0 Version will always come out as "v1.10" (one dot ten).  When you re-run MSI Live Update it will not recognize that v1.A0=v1.10 and tell you again that there is a newer version available (1.A0, which, again, is the same as v1.10, which was just properly flashed).
    I believe that the update went just fine, that you are currently using v1.A0=v1.10 and that MSI Live Update is actually just creating a pseudo-problem which is currently confusing you.  The pseudo-problem will immediately be out of the world, if you uninstall MSI Live Update and rely on the BIOS ID String as it appears on the POST Status Screen (this includes the date shown there).
    If a BIOS Update should ever be necessary again, please make sure that you won't use MSI Live Update but >>Use the MSI HQ Forum USB flasher<< instead.
    Quote from: Fingon on 25-October-09, 18:03:44
    Thank you for the quick reply!!
    Thats exactly what I have JUST found in this post by Svet: https://forum-en.msi.com/index.php?topic=127672.msg974800#msg974800
    Yes it is 1.10 of course!! I didnt know that 1.10 = 1.A0 ! Thank you for the reply. Then the MSI live update 4 program is dump that he wanted from me another update of Bios.
    So thank you! Problem is solved. 
    Edit: Yes, because of MSI live update I learned how to flash bios via flash disc. :-) But I was still confused by that 1.10 and of course by program saying me I should update again.. :-P
    Quote from: Lostsoul777 on 14-August-09, 05:46:25
    I had the same problem with 1.90 bios, so i updated to 1A, i just want to know why Bios Version says: v.1.10 instead v.1A?
    Quote from: LinuxGuy on 29-December-09, 01:17:45
    My computer does not have a floppy drive.  How do I update the BIOS?  (I tried the online utility 3 times.  It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.  So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).  So either the BIOS is getting updated, but the online tool is not recognizing this or it's not getting updated.  Either way, I would like to manually flash it in DOS.  Is it safe to burn the setup files to CD and boot from CD into DOS?
    That's the same BIOS version... Just the "MSI Live Updater" is not very smart...
    H.A=H.10=17.A=17.10 [A=10, H=17], the last "0" suffix in H.A0 means its official version.
    Quote
    I tried the online utility 3 times.  It always updates the BIOS "successfully" and when I restart my PC, I have to do either F1 to config or F2 to load setup defaults.
    So it looks like it's working, but the online update says that I have versions H.10 and version H.A0 is available (or maybe the other way around).
    So ignore this MSI Live Updater's no sense, and stop flashing your BIOS. You already have the latest version installed.
    The Tool now will detect and shows BIOS versions alias when the MSI BIOS version is known with more than one name.
    So no more flashing and flashing and flashing to the same version because of MSI LiveUpdate suggest again BIOS update...
    Also no more confusion:
    "What's my BIOS version?" -> I flashed my BIOS to 1.A0 [A7520IMS.1A0], but BIOS says its 1.10
    And MSI Live Update also says that i have 1.10 and 1.A0 is available and i should update it. I flashed it again, but its still 1.10?
    What's going on?
    Just run the MSIHQ USB Flash Tool and will show you all that you need to know
    Examples[with real/accurate info]:
    MSI Eclipse:
    BIOS version 1.9:
    BIOS version 1.10:[Tool now shows both BIOS versions alias]
    Report stored respective in MSIHQ_INFO.TXT at user's desktop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:30:55,34
    Mainboard:  Eclipse SLI (MS-7520)
    PCB Version:  1.0
    BIOS Version: V1.9
    BIOS Date:  09/22/2009
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:37:25,66
    Mainboard:  Eclipse SLI (MS-7520)
    PCB Version:  1.0
    BIOS Version: V1.A (aka Version: V1.10)
    BIOS Date:  10/27/2009
    More examples =>K9N6SGM-V / K9N6PGM-FI / K9N6PGM-F :
    More examples =>945GCM5-F V2 (FSB 1333) :
    Report stored respective in MSIHQ_INFO.TXT at user's desktop:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:47:34,35
    Mainboard:  MS-7267
    PCB Version:  4.0
    BIOS Version: VH.9 (aka Version: V17.9)
    BIOS Date:  11/20/2008
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in ба 30.12.2009 Ј. at  5:52:46,26
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VH.A (aka Version: V17.10)
    BIOS Date:  06/02/2009
    More examples =>780GT-E63 [N/A at MSI web yet] :
    For MSI Notebooks such decoding isn't need, examples:
    * Add new feature "Triple BIOS flash Recovery Ready"
    - Updated Mode 1
    - Updated Mode 2
    - Updated Mode 3
    Details:
    The feature include 3 auto prepared BIOS backups for followed purpose:
    * Internal BIOS recovery:
     - In a failure case Tool perform auto flash recovery [3 attempts, check for success after each and stop flashing if successful] before give control to BK_IO2, notice users about results and give control for manual attempts[if need]. [This a case if system isn't lockup/reboot, if bad flash occur]
     - This mode also have own store up to 5 backups[+1, the last saved copy is always backup.bin, if there was older one they become backup1.bin .. till 5]
    * BIOS backup stored as AMIBOOT.ROM [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
    * BIOS backup detected and stored for M-Flash style boot/recovery [AMI BIOS only] [Auto clean up older if there is any, before take a new backup to avoid recovery confusion]
    Performing test simulations with random generated BIOS versions[including betas] for M-Flash boot/recovery style, some examples:
    Copy/paste Tool log file:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:00:53,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VD.XB2 (aka Version: V13.33B2)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created  ==> A7267IMS.DX2 
    Where:
    * V13.33B2 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VD.XB2 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.DX2 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:12:23,95
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VK.VB7 (aka Version: V20.31B7)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.KV7 
    Where:
    * V20.31B7 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VK.VB7 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.KV7 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:18:34,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V3.9
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.390 
    Where:
    * V3.9 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
    * A7267IMS.390 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:22:24,04
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V8.1B9
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.819 
    Where:
    * V8.1B9==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * MSIHQ Tool "True BIOS Ready" detection feature isn't need here, since this BIOS version can be known only with one name.
    * A7267IMS.819  ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:25:38,51
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V4.E (aka Version: V4.14)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.4E0 
    Where:
    * V4.14 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V4.E ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.4E0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:28:16,62
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V1.BB1 (aka Version: V1.11B1)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.1B1 
    Where:
    * V1.11B1 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V1.BB1 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.1B1 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:31:57,78
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VI.FB5 (aka Version: V18.15B5)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.IF5 
    Where:
    * V18.15B5 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VI.FB5 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.IF5 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:36:02,40
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: V7.O (aka Version: V7.24)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.7O0 
    Where:
    * V7.24 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * V7.O ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.7O0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:39:11,84
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VC.8B6 (aka Version: V12.8B6)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.C86 
    Where:
    * V12.8B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VC.8B6 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.C86 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:49:38,46
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VG.PB6 (aka Version: V16.25B6)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.GP6 
    Where:
    * V16.25B6 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VG.PB6 ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.GP6 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]
    MSIHQ: Information detected by MSIHQ Tool ver: 1.18x
    MSIHQ: Report generated in 03.01.2010 г. at  7:53:17,26
    Mainboard:  945GCM5-F V2  (MS-7267)
    PCB Version:  4.0
    BIOS Version: VU.H (aka Version: V30.17)
    BIOS Date:  06/02/2009
    Co-respond BIOS backup created ==> A7267IMS.UH0 
    Where:
    * V30.17 ==> MSIHQ Tool detection [The same as CPU-Z, Everest]
    * VU.H ==> MSIHQ Tool "True BIOS Ready" detection feature
    * A7267IMS.UH0 ==> MSIHQ Tool BIOS recovery created by "Triple BIOS flash recovery Ready", part M-flash boot/recovery [1/3]

  • Flashing Tool Use with Linux and DOS

    OK, I am convinced that I should use the MSI Forum HQ USB Flashing Tool on my recently-RMA'd FM2-A75MA-E35.  After reading the documentation repeatedly, I still have questions. 
    I agree that the way to go is to flash from DOS, and I do in fact boot and run FreeDOS from a USB flash drive for video BIOS updates.  But my new msi board runs Linux, not Windows, so I cannot execute and install the Flashing Tool the expected way. 
    1.  So I installed the Flashing Tool on my Win7 system, which runs on a Biostar board.  Can that cause problems?
    2.  Can I put the resulting flashing system on my existing FreeDOS boot USB? 
    3.  As I understand it, the Tool will first read and save the existing BIOS code.  Is there an easy way to archive all of those saves and not overwrite earlier versions?  Is there a way to easily change the filenames in the Tool? 
    4.  On this new board I have on-chip video.  Is the video BIOS automatically updated when burning the MB BIOS?  Is it updated separately? 
    Thanks for your help!

    The forum flash tool can be run from any computer.
    What it does is prepare a bootable use stick. It also places the required flash exectable etc onto the drive and bios. So all you need to do is download whatever bios you wish from msi:
    >>MSI Downloads<<
    Place it on the desktop of the biostar computer, run the flash tool, point it at the bios then to your flash drive. Then put the flash drive in the other computer, hit f11 at boot and boot to the prepared usb stick.
    Then follow the directions.

  • Are there any performance benchmark tools for Flash?

    I am looking to benchmark Flash on various computers that I use.  I was surprised that the performance of Adobe Flash on my Intel i5 computer running Windows 7 Pro 64-bit OS and IE 10 was MUCH WORSE than running on a Windows 7 Pro 32-bit on an Intel i3 computer running the same browser. 
    I have tried running both 32-bit IE and 64-bit IE and get the same general bad performance on the 64-bit Windows OS. I would like to find a tool to benchmark these various computers so that I can establish baseline performance while I explore finding a fix Adobe Flash on a 64-bit OS.
    Can someone suggest some tools for Flash performance benchmarking? Thank you.

    The best advise we can really give you is that both companies offer free trials and you should download them both and see which works best for you.  I own Parallels Desktop v6, and VMWare Fusion v3.  For me, VMWare s better for some things, but Parallels is better for most.  Depending on what you do and how you use your applications your milage may vary.
    One other note to keep in mind.  Since Apple is looking to release a new OS version in the very near future, you might want to hold-off a bit on our vitualization choice just yet.  I would exect that both companies will be working on a new release for support/compatibilty of the new MacOS, so you might want to wait to see if there are any other changes that make you want to lean towards one or the other...

  • In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). I can't figure out how to disable.

    In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like brush etc). Whenever I try to use a tool,  a blue box appears around the line and I have to double click it to manipulate it, which opens just that line in a semi burred screen where all the other objects are semi-grey in the background. I can manipulate this line in this screen but nothing else at that time which I could do about 5 minutes ago. For exampe, I no longer can join up 2 lines drawn by the line tool together. For some reason this started randomly (probably due to a accidental shortcut combination) and I just can't put it back to what it used to be. I have inserted a video hopefully showing what I mean. Any help would be appreciated.

    Thank you - Just what I needed

  • Where is the deco tool in flash professionnal cc (Was: flash professional cc)

    I want to know if someone know where is the deco tool in flash professionnal CC ?? or how can I use someting similar?
    the ting I want to do is a flake effect going out of a compagny logo. I don't want to do it frame by frame by hand.

    Here is a list of deprecated features in Flash CC.
    Object-level UndoProject
    PanelActionScript 1&2
    TLF textMotion Editor
    Deco tools
    Bone tool (IK)
    Project panel
    Printing
    Strings panel
    Behaviors panel
    Movie Explorer
    Bandwidth Profiler
    FXG format
    Actions Toolbox
    Kuler panel
    Share my Screen
    Code Hinting (JSFL)
    Video Cue Points
    Close Captioning
    Device Central
    Customizable Tool Panel
    Importing BMP, TIFF, AutoCad, AIFF, Sound Designer, Around AU and Adobe
    Sounds Document formats
    File Info (XMP Metadata)
    Fireworks PNG Import
    New software with way less features.
    What a shame.
    Basically, almost everything I paid for in every version I have purchased over the years.
    Flash 4
    Flash 5
    Flash MX
    Flash MX 2004
    Flash 8
    Flash CS3
    Flash CS4
    Flash CS5
    Flash CS5.5
    Flash CS6
    I would stick with CS6 or later and call it a day.

  • Simple question about pen tool in Flash vs Photoshop

    Hi,
    After years of fumbling with the pen tool, I devoted my holiday weekend to mastering the pen tool in Photoshop. Though not necessarily a grand master of the pen tool, I'm happy to report that I've turned a corner and have transformed my pen tool feelings from fear/anger/hate into love/happiness/accomplishment. At long last, it all makes sense.
    I think.
    Today, I zipped into Flash to experiment with a tracing assignment I'm giving to my students in an upcoming Flash class. As I started to trace the path with the pen tool, I realized that it was behaving differently than it does in Photoshop. My specific problem is this:
    I place an anchor point and draw a line. Then I draw another line. Then I draw another line. Then, I decide to adjust one of the handles and try to draw another line. But it won't let me just go back to adding things to the path with the pen tool if any part of the process is disrupted.
    This seems like pretty basic functionality! What am I doing wrong?
    To make sure that I wasn't crazy, I went back to Photoshop and tried to do the same thing. It works just fine in Photoshop. At any time, I can hop away from the pen path and then back over to the pen tool. All I need to do to extend the path with the pen tool in Photoshop is to click on the last anchor point in the path. Surely, this must also be possible in Flash.
    I would be grateful for any advice!
    Aaron

    both in flash authoring tool not flash player.

  • Missing tools for Flash CC?

    How do you download missing tools for Flash CC?

    and some were deprecated: Deprecated features in Flash Professional CC
    if you need any (like bones), use flash cs6:  in your cc desktop app>apps>filters&versions>previous versions>flash install>cs6

  • Is there any way to improve the Brush tool of Flash to draw as natural as in Photoshop?

    Hi,
    it's really bothering me and many other traditional animators that Adobe still hasn't improved the brush tool of Flash for people that want to really draw something on it.
    I really really wish to be able to draw on flash as natural and consistent as in photoshop, without those stupid automatic smoothing options or the random roughness of it.
    Flash is a great too for traditional animators but the brush is terrible.
    Either make Photoshop as good for animating traditional as Flash, or give flash a brush that is nice as standard Photoshop brush.
    I just want a normal brush is smooth and natural, that's all. Why are vector tools so weak for drawing????
    PLEASE ADOBE, DO SOMETHING!!!

    Hi Sunil,
    Iam not sure of the settings but if u can change the code then u can change the file format passed to FM SO_DOCUMENT_SEND_API1 ,which sends email to the recipient u desire..
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
      EXPORTING
        document_data                            = w_doc_data
       PUT_IN_OUTBOX                         = 'X'
       SENDER_ADDRESS                    =   l_v_sender_address
       SENDER_ADDRESS_TYPE          = l_v_sender_address_type
       COMMIT_WORK                          = 'X'
    IMPORTING
       SENT_TO_ALL                            = sent_all
      TABLES
       packing_list                                = it_packing_list
       CONTENTS_BIN                         = it_attachment
       CONTENTS_TXT                         = it_message
       receivers                                    = it_receivers
    it_packing_list hs the file format field..
    For any clarification , please revert back..
    regards,
    Dinesh.
    Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 4:08 PM

  • Tools for Flash Lite 3 development.

    I'm new to flash development. So i'm looking for tools to start development for flash lite 3 (i'm not interested in 4th version).
    There are a loot tools available:
    * Flash Pro CS 5
    * Flash Builder 4
    * Flex SDK?
    What is the best option to start?

    Hi,
    You can't handle them. Its the default behavior from FL.
    You can use KuneriLite or SWF2Go+PyS60 or APIBridge for loading external resources and checking for errors.
    Best,
    // chall3ng3r //

  • Pen Tool in Flash

    Whenever I select the pen tool in Flash, in the properties
    panel it only gives me an option for stroke color, not fill, so I
    can only make stroked objects. I want to make a colored object
    without a stroke. How do I do this? (running cs3).

    The Pen tool is only for making strokes - therefore the fill
    color swatch is
    simply not an option - if you want to make shapes then use
    any of the shape
    tools or the brush tool. You can always draw with the pen
    tool and then
    connect the paths and use the bucket tool to fill them.
    Adobe Certified Expert
    www.keyframer.com
    www.mudbubble.com
    (if you want to email me, don't look)
    "xslamx" <[email protected]> wrote in
    message
    news:g40pmj$hcl$[email protected]..
    > Whenever I select the pen tool in Flash, in the
    properties panel it only
    > gives
    > me an option for stroke color, not fill, so I can only
    make stroked
    > objects. I
    > want to make a colored object without a stroke. How do I
    do this?
    > (running
    > cs3).
    >

  • Extractions, refine edge, using the brush tool doesn't work on iMac but does on MacBookPro

    When in the refine edge interface the brush tool will not work on my iMac but will on the MacBookPro. I haven't reloaded the program yet as I don't want to loose my plugins. Will they stay in tacked? Does anyone know how to fix this? Frustrated that Adobe won't help because I haven't the latest and greatest!!

    After reading support articles I found and an answer in the iTunes Support pages.
    How to recreate your iTunes Library
    http://docs.info.apple.com/article.html?artnum=93313
    Only took a few minutes.
    iMac 700 Ghz G4   Mac OS X (10.3.9)  
    iMac 700 Ghz G4   Mac OS X (10.3.9)  

  • Flash tools panel

    When I bring up my template file I purchased I can not access
    the flash tools panel. Would someone please reply to this message
    with how I can edit the text on this template created page.
    Thanks in advance.

    I had that same problem, but we got working with it, and
    figured it out.
    When the "New Document" opens, if you clicked on Flash
    project, the tools don't work, but, like we clicked on Flash File,
    they do...
    I'm not sure if this helps any but, I thought I could at
    least try and help XP

  • MSIHQ BIOS flash tool problems

    I was unable to flash my BIOS using M-Flash so I thought I'd give the MSIHQ BIOS Flashing Tool a try. 
    After extracting the tool I gave it a try.  The first thing that happened was that the tool checked for the latest version and generated the MB Info file:
    MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
    MSIHQ: Report generated in Mon 07/29/2013 at 14:41:27.01
    Mainboard:  Z87-G43 (MS-7816)
    PCB Version:  1.0
    BIOS Version: V1.1
    BIOS Date:  5/6/2013
    Next, I selected the "Fix My USB Key" tool.  I selected drive F: and agreed to the disclaimer about erasing the info on the drive.  When asked if I wanted to proceed, I answered "Y" and the repair program started.
    Next, I got an error  address $1C6
    The system cannot find the file specified"
    So, I retried the tool and after answering "Y" to start, there was a brief falsh of a message to the effect that "Drive Not Responding"
    I unplugged the flash drive and plugged it in again and Windows said that the drive was not formatted and asked if I would like to format it.  I answered yes and tried to format it in FAT (FAT 32 was not an option for some reason) and after attempting to quick format the drive, Windows returned a message that "Windows was unable to format the device".  Next I tried a full format but the result was the same.
    Where should I go from here?

    Quote from: flobelix on 31-July-13, 00:39:10
    The tool creates an own booting stick. Any Win98 files aren't required. After a stick was fixed with the tool and it is used to prepare a stick for flashing it adds all necessary itself. For flashing the beta always use Mode 1 not 2 of the tool. Directly point to the downloaded beta archive and don't decompress it. Basically follow the instructions in the beta section excatly.
    https://forum-en.msi.com/index.php?topic=170132.msg1244286#msg1244286
    Not true with Z87. Use mode 2 as xmad mentioned in his earlier reply. M-Flash on Z87 works as advertised. If there is an ME update involved, be sure to select BIOS + ME choice, and do not remove the USB stick before the self retart and ME flash is completed.

Maybe you are looking for