EDI 820 Mapping

Hi Guys,
Customer send send sall the payments to Locbox. The bank send EDI 820 file
Can you please send a sample mapping document for EDI 820 format to PEXR2002 idoc to Lockbox. My email [email protected]

Hi,
http://www.sapfans.com/forums/viewtopic.php?p=497781&sid=a3d0079130fe3ae
http://www.mail-archive.com/[email protected]/msg06108.html//www.mail-archive.com/[email protected]/msg06108.html
http://www.cn.ca/PDF/EDI_820_Guide.pdf
http://www.pfizer.com/business/edispecs/ap820ach.pdf
Hope this helps.
Thanks
NT

Similar Messages

EDI 820 mapping into SAP

Hi
Can any one give me the step-by-step approach in mapping the EDI 820 (both Inbound steps and Outbound steps) into SAP standard functionality ?
Thanks
Maruthi Ram

Hello Maruthi
[http://edi.stylusstudio.com/msg013304.htm]
Hi Jeff-
It is a message type PAYEXT (REMADV), the i-Docs are PEXR2001 and
PEXR2002.
Best Regards,
Mike Kelly
----- Original Message -----
From: "Jeff Garwick" < To: < < < Sent: Wednesday, 16 February, 2005 05:04 PM
Subject: [EDI-L] SAP transaction set / EDI 820
What is the SAP transaction set that supports an inbound EDI 820
payment/remittance advice?
Thank you,
Jeff Garwick
Bourns, Inc.
Please use this input as starter for your own detailed search and let us know if you have found an appropriate solution.
Regards
Uwe

Mapping with EDI 820

Hi Friends,
Please help me to find these fields to map from SAP to EDI 820 (Positive pay).
Where can I find these fields in SAP to get populated for the payment run.
Our Company name:
Our Bank Name:
Our Bank Key:
Check Lot number:
Check number:
Many Regards,
Sim

-Company Name Chek field BUTEXT in table T001
-BANKK and BANKA for bank key and name in table BNKA
-STAPL and CHECT for check lot number and check number in table PCE.
Regards,
Bharat

Mapping from PEXR2002 iDoc to EDI 820

We are planning to use XI to map from the payment advice (PEXR2002) iDoc to EDI 820.
We have 2 options: (1) Use XI and an EDI adapter (e.g. Seeburger); or (2) Use XI's own mapping functionality.
If you have done iDoc to EDI mapping with either of the above 2 options, please briefly advise about your experiences and how much efforts it took to develop the mapping.
Thank-you
Bac Quan

Hi Bac,
Although it is possible to create an EDI message in an XI mapping (or XSLT), this is not very nice. The use of an EDI adapter (iWay or SeeBurger) is strongly recommended.
The other way around (rom EDI to XML) is hardly feasiable without an EDI adapter. Although I haven't worked the SeeBurger adapter, it looks quite nice.
Kind regards, Guy Crets

Mapping EDI 820 (remittance advice) to IDOC

Hi,
Can anyone give me the steps required to do a mapping of EDI 820 (Remittance advice) to IDOC? If you have the mapping already, can you send that to me at garapatic at yahoo.com

Hi Greetson,
    Before I posted information on this forum, I checked the web to see if I can look at any helpful stuff for this mapping and I could not find any.
   I tried to look for EDI EDIFACT stuff on the website for my mapping EDI vendor(Biztalk) and could not find any.
   Can you point me to specific websites which will be helpful to me? Or to any mapping document.
Thanks,
Nile

Mapping edi 820 VS idoc

Hi
I am doing mapping for EDI 820 and PEXR2002 IDOC output . I couldnt able to map for sure certain interchange control header and functional group header ?. I need to submit this map to EDI team to process . For example Control number field ,Sender application code ,Reciever application code i couldnt able to map corresponding segments in IDOC for Sure .
It would be appreciated if you could help me out in this .
Email id [email protected]
Thanks in advance

thanks

Creation of EDI 820 for outgoing payments in SAP

Hi Experts,
We have a requirement where in we need to create an outgoing payment file in EDI820 with in SAP.
We basically need to create specifications in EDI820 format for the bank to print checks and make wires and EFT payments.
That EDI820 file will be created at the time of Automatic Payment Run(F110).
Right now our client is sending a flat file to external service provider and they are creating EDI820 files and sending to the banks. Going forward the services of this service provider will be decommissioned and an EDI820 file is to be generated in SAP and sent to the bank via SWIFT Net.
Bank has provided us a sample file and file format for EDI820. This file format contains ST, BPR, RMR, REF etc records. There records have different codes and qualifiers.
As far as we have analyzed, there are no standard SAP programs that can generate flat file in the EDI 820 format. Therefore we are heading towards developing a Z program for creating an EDI820 format.
We are facing problem in mapping this file with SAP fields. We need to know how exactly we can map this file in SAP so as to create a program to generate EDI820. If anybody has had a similar requirement (for creating outbound EDI820 in SAP) and can provide us some lead, it will be greatly helpful for us.
Thanks in advance for the help!

Have you worked on this requirement?
Could you please provide step by step instructions to configure and the high level process?

Creation of EDI 820 fromat for outgoing payments in SAP

Hi Experts,
We have a requirement where in we need to create an outgoing payment file in EDI820 with in SAP.
We basically need to create specifications in EDI820 format for the bank to print checks and make wires and EFT payments.
That EDI820 file will be created at the time of Automatic Payment Run(F110).
Right now our client is sending a flat file to external service provider and they are creating EDI820 files and sending to the banks. Going forward the services of this service provider will be decommissioned and an EDI820 file is to be generated in SAP and sent to the bank via SWIFT Net.
Bank has provided us a sample file and file format for EDI820. This file format contains ST, BPR, RMR, REF etc records. There records have different codes and qualifiers.
As far as we have analyzed, there are no standard SAP programs that can generate flat file in the EDI 820 format. Therefore we are heading towards developing a Z program for creating an EDI820 format.
We are facing problem in mapping this file with SAP fields. We need to know how exactly we can map this file in SAP so as to create a program to generate EDI820. If anybody has had a similar requirement (for creating outbound EDI820 in SAP) and can provide us some lead, it will be greatly helpful for us.
Thanks in advance for the help!

The program that sends the flat file should give you all the necessary fields, selection criteria, etc. If the third-party constructs EDI820 from it, then there is enough data in that file for you to add steps to create an 820.
So, I'd start with the existing program, a particular outbound file and a copy of the 820 file created from it (if that can be obtained) and figure out how the intermediary converted the data to the correct format. Piece of cake, right?

EDI 820 EDI to XML conversion error

Hi Experts,
We have configure EDI 820 Inbound Scenario in our system. The incoming EDI 820 file is not getting converted in XML from EDI. I try to convert it into XML in BIC Mapping Designer but it is displaying the below error message.
"Error:ID=2099;LEVEL=1] InhouseDocReader doSyntaxCheck(): offset[326]: the found segment
ENT is not in the message description.
DESCRIPTION: InhouseDocReader Error: The Segment
ENT is missing in the message description. Check your file."
Please find below the EDI file.
"ISA*00* *00* *12*123456789 *01*111122233 *140317*1432*U*00401*120000004*0*T*>~GS*PO*123456789*111122233*20140317*14315990*4*X*004010~ST*820*0001~BPR*I*264.9*C*CHK~REF*IA*6400900~REF*CK*7896883~DTM*097*20080811~N1*PE*COMPANY ABC~N3*21 PENN PLAZA*SUITE 909~N4*NEW YORK CITY*NY*10001~
ENT*1~NM1*PO*2*Costco*****92*1033918430000~RMR*IV*0195112**137.33*137.33~REF*PO*008471856056~DTM*003*20080711~ENT*2~NM1*PO*2*Costco*****92*1033918430000~RMR*IV*0195040**162.38*162.38~REF*PO*008471852792~DTM*003*20080711~ENT*3~NM1*PO*2*Costco*****92*1033918430000~RMR*IV*0194903**104.8*104.8~REF*PO*008471816334~DTM*003*20080711~ENT*4~NM1*PO*2*Costco*****92*1033918430000~RMR*IV*0195039**137.33*137.33~REF*PO*008471846520~DTM*003*20080712~ENT*5~NM1*PO*2*Costco*****92*1033918430000~RMR*IV*RV0047997934**-224.54*-224.54~REF*RZ*0004891~DTM*003*20080807~ENT*6~NM1*PO*2*Costco*****92*1033918430000~RMR*IV*RV0084791384**-52.4*-52.4~REF*RZ*8471700434~DTM*003*20080807~SE*39*0001~GE*1*4~IEA*1*120000004~"
Can anyone let me know what could be error is?
Regards
Faisal

Dear Abdul,
I copied the file from your posting into a text-file and tried to convert it with my 820 BIC-Mapping.
I just had to make two modifications:
- add some spaces so that the Sender/Receiver fields in the ISA segement were 15 fields long
- remove a "space" before ENT*1, but this space might also just have been there because of how you posted the content into this posting.
After I had made this small changes the file could be translated perfectly fine with the mapping
See_E2X_ANSIX12_820_V4010
So it looks like eitehr your settings are not correct in the channel (e.g. a wrong mapping is used) or the file has been modified manually (with some additional blanks, CRLF, etc...)
Regards
Stefan

Program to generate EDI 820

Hi SAP Experts,
Is it possible to create a program which can directly generate EDI 820 format (with mapping SAP tables and fields to EDI 820) while doing the payment run with F110.
I mean without mapping IDOC with EDI 820.
Please advise,
Regards,
Sim

Hi,
I know you mentioned that you are not talking about IDOC mapping. But i am just curious why you want to go for custom program.
SAP provides message type PAYEXT (REMADV), IDocs PEXR2001 and PEXR2002 for EDI 820.
Can you please clarify why you want to go for custom abap program so i may be able to help you.
Regards,
RS

EDI 820

Hi SAP Experts,
Is it possible to create a abap program to generate EDI 820 format (with mapping SAP tables and fields to EDI 820) while doing the payment run with F110.
I mean without mapping IDOC with EDI 820.
Please advise,
Regards,
Sim

Hi,
I know you mentioned that you are not talking about IDOC mapping. But i am just curious why you want to go for custom program.
SAP provides message type PAYEXT (REMADV), IDocs PEXR2001 and PEXR2002 for EDI 820.
Can you please clarify why you want to go for custom abap program so i may be able to help you.
Regards,
RS

EDI 820 used for Check processing

We currently print our checks via a data file sent to a 3rd party. They have informed us they can accept an EDI 820 instead of the custom format we send them now. We use 820s for other payments so I am familiar with how that process works, but I am having issues getting a check number assigned since you normally would not need one.
Today, we process our check payments with F110, and the assigned print program has the check lot information to assign the check numbers during processing. Once that is complete, we extract the data via a custom program and send it to the 3rd party printer. We currently use EDI 820s to send ACH payments to the bank and that is working just fine. We use program RFFOEDI1 to create the IDOCs for the 820s.
I am finding that if I use the current print program to assign the check numbers, I can not create the IDOCs for an 820. If I change the payment medium on the check payment method so that I can use RFFOEDI1, then I get no check numbers. I need the check numbers since we are still dealing with checks, but just trying to change the means of sending the data to the 3rd party printer.
If anyone has done this and can point me in the right direction, I would greatly appreciate it.
Thank you,
Karen

Sim
I think the information you finally will be sending in the format of EDI 820 will first be stored as IDOCs. The mapping document that you develop will tell which segment in the IDOC will be stored in which EDI segment..
for example:
for the amount field, the IDOC segment E1IDQU5-MOABETR will be mapped to BPR02.
a script that middleware team runs will translate these IDOCs to EDI820's using the mapping rules.
if you are not using middleware, then probably ABAPers will use the same mapping logic to create the EDI820.
assign points if you find this useful.

EDI 824 mapping

Dear SAP Friends,
I am creating the specifications for EDI 824 Application Advice - Integrated Payables against our EDI 820 flat file send to bank for making payments through Checks, ACH and Wires.
Against our EDI 820 flat file bank will send us back EDI 824 flat file for the rejected payments.
I have to create a mapping method of EDI 824, and send to ABAPer to create a program for it. So that after uploading it in SAP it will make the readable file about what payments were rejected.
Does anyone have this kind of mapping document for EDI 824 format.
Thanks & Regards,
Paul

Hi,
Please check this links perhaps they may help.
http://www.erpgenie.com/sap/sapedi/templates/TXTRAW%20824%20map.xls
http://www.cn.ca/PDF/edi_824_implementation_guide.pdf
Regards,
Ferry Lianto

EDI 820/812 program?

I have succesfully implemented the EDI payment orders (820) using standard PAYEXT and PEXR2002 via program RFFOEDI1. However, I now need to produce an 812 that has the detail on the adjustments made to a payment order (CREADV). The issue...I don't know what standard SAP transaction/program creates the IDOC that eventually becomes the 812. Can anyone please offer some assistance??

Hi,
I know you mentioned that you are not talking about IDOC mapping. But i am just curious why you want to go for custom program.
SAP provides message type PAYEXT (REMADV), IDocs PEXR2001 and PEXR2002 for EDI 820.
Can you please clarify why you want to go for custom abap program so i may be able to help you.
Regards,
RS

EDI 820 File Format

Hi,
I am currently working on Outgoing Payment process. We have a specific requirement from bank to provide them with EDI 820 file format for all outgoing payments. I am not sure how can provide this file format from SAP. Any help is highly appreciated.
Thanks,

Hi Sahaj
Check out his thread,
EDI 820 to IDOC Sample Mapping Needed
Thanks
Nikhil

EDI 820 Mapping

Similar Messages

Maybe you are looking for