EDI 858 inbound process

Hi Gurus,
We have a following reuqirement. We have a third party company that acts like a freight payment system for us. So we want to have an EDI inbound process setup so that the freight payment system is notified of the shipment for example (material, quantity, weight, supplier etc) so that when the supplier sends the invoice, it will be a match and they can process the payment. Now please guide me through these settings and how to and where to look for these settings. Also which point will be the best trigger point to send a file to the freight payment system? (GR point or PO creation)?
Thanks
Anusha

Hello,
Did you implement this? I am just starting this very project. When a delivery order is marked goods receipt then I need to send out an 858. I'm thinking of using IDoc Delvry03 with message type SHPORD but I don't know what process code to put in the partner profile.
I have also found a reference to IDoc SHPMNT05 with message type SHPMNT and process code sd11.
Could you please tell me what you ended up doing?
Thanks,
Loren

Similar Messages

  • ORA-24816 Error on EDI inbound processing

    We are encountering an issue for EDI X12  inbound data files which have extraneous characters. B2B initially failed throwing  “ Document Protocol Identification error “ .
    To resolve this, we enabled flag  “b2b.edi.enablePeprocess” to true , after which it started processing fine in DEV environment , however it throws below exception in QA environment .
    Internal Exception: java.sql.SQLException: ORA-24816: Expanded non LONG bind data supplied after actual LONG or LOB column
    Error Code: 24816
    Call: INSERT INTO B2B_WIRE_MESSAGE (ID, JOB_ID, ACKNOWLEDGEMENT_MODE, LABEL, ATTRIBUTE2, MESSAGE_DIGEST, ATTRIBUTE4, MESSAGE_ID, ATTRIBUTE3, ATTRIBUTE5, CPST_INST_CREATED_TIME, CREATED, LAST_RESUBMITTED_TIME_STAMP, MODIFIED, LAST_VIEWED_TIME_STAMP, MSG_SIZE, DELIVERED_ENDPOINT, PASSWORD, DIRECTION, PORT, ENCRYPTION_CERTIFICATE, PROTOCOL_COLLABORATION_ID, ERROR_CODE, PROTOCOL_MESSAGE_ID, ERROR_DESCRIPTION_CLOB, PROTOCOL_TRANSPORT_BINDING, ERROR_TEXT_CLOB, REFER_TO_PROTOCOL_MESSAGE_ID, EXCHANGE_REMAINING_RETRY, RESUBMIT_COUNT, FROM_ADDRESS, SIGNING_ALGORITHM, SIGNING_CERTIFICATE, MESSAGE_STATUS, SIGNING_PROTOCOL, LAST_VIEWED_USER_NAME, STATE, DIGEST_ALGORITHM, TO_ADDRESS, ENCRYPTION_PROTOCOL, TRANSPORT_CERTIFICATES, ERROR_TEXT, TRANSPORT_CORRELATION_ID, EXCHANGE_RETRY_INTERVAL, TRANSPORT_HEADERS, ATTRIBUTE1, TRANSPORT_PROTOCOL, CHANNEL_NAME, TRANSPORT_PROTOCOL_VERSION, ERROR_DESCRIPTION, TRANS_SECURITY_PROTOCOL, HOST_NAME, TRANS_SECURITY_PROT_VERSION, ENCRYPTION_ALGORITHM, URL, LAST_RESUBMITTED_USER_NAME, USER_NAME, EXCHANGE_ATTEMPT_COUNT, VERSION, PAYLOAD_STORAGE, PACKED_MESSAGE, RESUBMIT_REF_TO) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
            bind => [A513532C140185965980000010261DFC, null, SYNC, null, null, rLdBG4pYQf76lQXJZdl43gE7QqE=^M
    We checked many options for the differences between Dev & QA , but could not find a root cause . 
    Version : 11.1.1.6

    Hi,
    I am getting the same error.
    Can u please help me on this.
    Thanks and Regards
    Neha Kapoor

  • Steps in Inbound Processing in ALE IDOC

    Hi all,
    Could anyone explain the steps to be followed in inbound processing in ALE Idoc.
    I know we have to create a FM n then call that in a program. But still the detail steps are not clear.
    An example will be really helpful.
    Thanx

    Hi
    Outbound:
    Step 1.  Application document is created when transaction is saved.
             2.  Message control is invoked.
             3.  Messages are processed by system.
             4.  Messages are Edited (if desired).
             5.  Output (ALE /  EDI) is checked
             6.  Validate against Message control record from Partner Profile
             7.  Application Document is saved.
             8.  Entry NAST table is created for every selected output program
                  along with Medium & Timing.
             9.  Check for Process Immediately .
                     If (yes)
                       Determine Processing Program from TNAPR Table.
                     ELSE
                       Execute RSNASTED Program.
           10.  Read Partner Profile to determine Process Code.
           11.  Process Code points to the Function Module & Invoked.
           12.  IDoc is generated. 
           13.  Check for ALE Request.
                        if (Yes)
                            Perform Filters, Conversions, Version Changes etc.
                        Else.
                            IDoc is stored in DATABASE.
    INBOUND:
    Step 1.  EDI Subsystem creates an IDoc file from EDI Messages
            2.   Subsystem calls Functional Module                                 EDI_DATA_INCOMING from startRFC program.
             3.  Data in Control Record is validate against the Partner                       Profile.
            4. IDoc is generated in Database and syntax check is                      carried out.
            5. IDoc file is deleted once file read.
            6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow. 
                       7.  Check for Process Immediately.
                   If NO
                     Execute RBDAPP01 Program
                   Else
                      Read Process Code from Partner Profile        
                           Process Code Points to  Function Module
                     Application Document Posted.     
    further help:
    check url
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training
    And also u can get lots of inof from the below link.
    http://www.sapgenie.com/ale/why_ale.htm
    Data Creation in Idoc
    IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
    asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
    While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
    IDoc is a intermediate document to exchange data between two SAP Systems.
    *IDocs are structured ASCII files (or a virtual equivalent).
    *Electronic Interchange Document
    *They are the file format used by SAP R/3 to exchange data with foreign systems.
    *Data Is transmitted in ASCII format, i.e. human readable form
    *IDocs exchange messages
    *IDocs are used like classical interface files
    IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
    WE30 - you can create a IDOC type.
    An IDOC with data, will have to be triggered by the application that is trying to send out the data.
    FOr testing you can use WE19.
    How to create idoc?
    *WE30 - you can create a IDOC type
    For more information in details on the same along with the examples can be viewed on:
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
    http://www.sappoint.com/presentation.html
    http://www.allsaplinks.com/idoc_search.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://www.erpgenie.com/sapedi/idoc_abap.htm
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30 )
    Create Message Type ( WE81 )
    Assign Idoc Type to Message Type ( WE82 )
    Creating a Segment
    Go to transaction code WE31
    Enter the name for your segment type and click on the Create icon
    Type the short text
    Enter the variable names and data elements
    Save it and go back
    Go to Edit -> Set Release
    Follow steps to create more number of segments
    Create IDOC Type
    Go to transaction code WE30
    Enter the Object Name, select Basic type and click Create icon
    Select the create new option and enter a description for your basic IDOC type and press enter
    Select the IDOC Name and click Create icon
    The system prompts us to enter a segment type and its attributes
    Choose the appropriate values and press Enter
    The system transfers the name of the segment type to the IDOC editor.
    Follow these steps to add more number of segments to Parent or as Parent-child relation
    Save it and go back
    Go to Edit -> Set release
    Create Message Type
    Go to transaction code WE81
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter
    Click New Entries to create new Message Type
    Fill details
    Save it and go back
    Assign Message Type to IDoc Type
    Go to transaction code WE82
    Change the details from Display mode to Change mode
    After selection, the system will give this message “The table is cross-client (see Help for further info)”. Press Enter.
    Click New Entries to create new Message Type.
    Fill details
    Save it and go back
    Check these out..
    Re: How to create IDOC
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    go trough these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
    1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
    2.IDOCs are independent of the sending and receiving systems.
    3.IDOCs are independent of the direction of data exchange.
    The two available process for IDOCs are
    Outbound Process
    Inbound Process
    AND There are basically two types of IDOCs.
    Basic IDOCs
    Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
    Extended IDOCs
    Extending the functionality by adding more segments to existing Basic IDOCs.
    To Create Idoc we need to follow these steps:
    Create Segment ( WE31)
    Create Idoc Type ( WE30)
    Create Message Type ( WE81)
    Assign Idoc Type to Message Type ( WE82)
    imp links
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    www.sappoint.com
    --here u can find the ppts and basic seetings for ALE
    http://sappoint.com/presentation.html
    www.sapgenie.com
    http://www.sapgenie.com/ale/index.htm
    Check these links.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
    Please check this PDF documents for ALE and IDoc.
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
    Check below link. It will give the step by step procedure for IDOC creation.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    Reward points for useful Answers
    Regards
    Anji

  • Inbound Processing Error ?

    I create an outbpund idoc as a file on a file port : FILEIN.
    FILEIN port is defined as a file port with Dir parameter set as : /tmp/
    and FM parameter set as : EDI_PATH_CREATE_DATE_TIME . No parameters are maintained for Inbound file .
    I create outbound idoc with :
    Reciever Port FILEIN and Sender port A00001 (defined as a trfc port ).
    The Idocs are generated in the specified directory .
    Now i want to process these idocs with RSEINB00 Program .
    I give the filename and Port name : FILEIN to the program .
    The partner profile is maintained for the inbound processing .
    But I somehow recieve the error : '56 : Reciever port in control record is invalid. '
    How can this be solved ? DO i need to maintain the Inbound file parameters too in the File port . ?

    Hi,
    You should first turn your output IDoc file to an Inbound IDoc file. use the transaction code we12 to that.
    Following is the more info on Using We12.
    We12 - IDoc testing tool which will emulate an EDI subsystem, by taking a outbound text file IDoc previously generated by SAP and use it to create and process an inbound IDoc.  It is also possible to create an outbound IDoc from an inbound IDoc as well.  Commonly referred to as the ‘Turn-around’ program
    Field level documentation on each field on the We12 screen..
    Source:
    Directory + file: The field contains the path and filename of the existing IDoc text file at the operating system level.
    Target:
    Directory + file: the target fields contain the path and filename of the IDoc text file that is to be created.  The default entries of these fields are based on the definition of the TESTPORT specified in the IDoc Administration transaction (see WE46 for IDoc Administration; WE 21 for Port Definition).
    Sender:
    Partner Number: Customer or Vendor number of the sender - when testing inbound messages, this partner number must exist as a valid inbound partner (transaction WE20).
    Partner Type: Code, which identifies the type of sender (i.e. LI – Vendor; KU – Customer).
    Partn.function: Code, which identifies role of the partner (i.e. SH – Ship-to).
    Message type: Code, which identifies the type of data, based on the EDI message type (i.e. ORDERS, INVOIC).
    Variant: Code, which further subdivides the type of message (i.e. MM or FI for a logical message type of INVOIC).
    Function: Code, which defines the function of the message with regard to its transmission.
    Test: Flag indicating that this is a test message.  This is one of the keys to finding the inbound partner profile.
    Port: Logical ID of the sending system.  Enter the logical name of the receiving as defined in the transaction WE21.  The default entries of these fields are based on the definition of the TESTPORT specified in the IDoc Administration transaction (WE46).
    Recipient:
    Partner Number: Customer or Vendor number of the receiver.
    Partner Type: Code, which identifies the type of receiver (i.e. LI - Vendor; KU - Customer).
    Partn.function: Code, which identifies role of the partner (i.e. SH - Ship-to).
    Direction: The direction that the newly created IDoc will be assuming -1 for outbound, 2 for inbound.   Default is ‘2’.
    Client: The client that the newly created IDoc will be processed in.  The default is the client that the user is logged into when executing this transaction.  
    Port: Logical ID of the receiving system.  Enter the logical name of the receiving system in the form 'SAPxxx'.  'xxx' stands for the ID of the SAP System.  The default entries of these fields are based on the definition of the TESTPORT specified in the IDoc Administration transaction (WE46).
    Turn-around program examples: When taking an outbound purchase order IDoc (which was generated via MM purchase order create) and turning it around to test inbound SD sales order creation via EDI, the ‘Sender’ would be a customer while the ‘Receiver’ would be a vendor.  If using an outbound advanced ship notice IDoc (generated via SD delivery processing) and turning it around to test inbound shipping notification, the ‘Sender’ would be a vendor, and the ‘Receiver’ would be a customer.  If using an outbound invoice IDoc (generated via SD invoicing) and turning it around to test inbound EDI invoice processing, the ‘Sender’ would be a vendor, and the ‘Receiver’
    Hope this helps.
    Mark the Helpful answerers..
    Regards,
    Nagaraju Chidurupalli

  • Error In inbound Processing IDoc

    Dear All,
    I am facing error while inbound processing of IDoc
    In status record of IDoc following errors are occuring
    Status 60 : EDI: Syntax error in IDoc (mandatory segment missing)
    The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ). However, the segment is missing in the IDoc
    Status 51: Application Document not posted
    Log details :
    Error : Material Number should be filled.
    When i checked IDoc all 4 fields in E1MAKTM have the values in inbound IDoc.
    Please guide me how to resolve these issues so that IDoc will be posted and Material Master will get created in reciever system.
    Thanks

    Hi Praveen,
    I checked the data in IDoc for this segment.
    It is ok as required in basic message type.
    e.g. the error says that mandetory segment E1MAKTM is missing.
    when i check basic type
    MSGFN : Function
    internal data type : CHAR
    Internal length : 000003 characters
    Position in segment : 001, Offset : 0063. external length : 000003
    SPRAS : Language Key
    internal data type : LANG
    Internal length : 000001 characters
    Position in segment : 002, Offset : 0066. external length : 000001
    MAKTX : Material Description (Short Text)
    internal data type : CHAR
    Internal length : 000040 characters
    Position in segment : 003, Offset : 0067. external length : 000040
    SPRAS_ISO : Language according to ISO 639
    internal data type : CHAR
    Internal length : 000002 characters
    Position in segment : 004, Offset : 0107. external length : 000002
    is information.
    and data in segment of IDoc is
    MSGFN     005
    SPRAS     E
    MAKTX     MANATA2000 TEST ALE
    SPRAS_ISO     EN
    which i think is ok.
    I have no clue why this syntax error is coming.
    Thanks
    Niketan

  • I found a exit CIFPUR02 for purchase order inbound process.is it suitable?

    I found a exit CIFPUR02 for purchase order inbound process.is it suitable?
    my idoc is PORDCR102 AND message type is PORDCR1. my requirement is this is EXIT should trigger before saving the data in me21n.
    Edited by: rk.kolisetty on Jun 24, 2010 4:59 PM

    Hi,
    Following are the user exit relevant to T Code ME21n.
    AMPL0001  User subscreen for additional data on AMPL
    LMEDR001  Enhancements to print program
    LMEKO001  Extend communications structure KOMK for pricing
    LMEKO002  Extend communications structure KOMP for pricing
    LMELA002  Adopt batch no. from shipping notification when posting
    LMELA010  Inbound shipping notification: Transfer item data from
    LMEQR001  User exit for source determination
    LMEXF001  Conditions in Purchasing Documents Without Invoice Rece
    LWSUS001  Customer-Specific Source Determination in Retail
    M06B0001  Role determination for purchase requisition release
    M06B0002  Changes to comm. structure for purchase requisition rel
    M06B0003  Number range and document number
    M06B0004  Number range and document number
    M06B0005  Changes to comm. structure for overall release of requi
    M06E0004  Changes to communication structure for release purch. d
    M06E0005  Role determination for release of purchasing documents
    ME590001  Grouping of requsitions for PO split in ME59
    MEETA001  Define schedule line type (backlog, immed. req., previe
    MEFLD004  Determine earliest delivery date f. check w. GR (only P
    MELAB001  Gen. forecast delivery schedules: Transfer schedule imp
    MEQUERY1  Enhancement to Document Overview ME21N/ME51N
    MEVME001  WE default quantity calc. and over/ underdelivery toler
    MM06E001  User exits for EDI inbound and outbound purchasing docu
    MM06E003  Number range and document number
    MM06E004  Control import data screens in purchase order
    MM06E005  Customer fields in purchasing document
    MM06E007  Change document for requisitions upon conversion into P
    MM06E008  Monitoring of contr. target value in case of release or
    MM06E009  Relevant texts for "Texts exist" indicator
    MM06E010  Field selection for vendor address
    MM06E011  Activate PReq Block
    MMAL0001  ALE source list distribution: Outbound processing
    MMAL0002  ALE source list distribution: Inbound processing
    MMAL0003  ALE purcasing info record distribution: Outbound proces
    MMAL0004  ALE purchasing info record distribution: Inbound proces
    MMDA0001  Default delivery addresses
    MMFAB001  User exit for generation of release order
    MRFLB001
    Rgd,
    Chetan

  • EDI 810 Inbound - Vendor Invoice

    Hi
    What is the Message type, Basic type, Process code and Function module for Inbound Vendor Invoice (EDI 810 Inbound) ?
    Thanks
    Maruthi

    Hi
    I am  working on the Invoice receipt thru EDI-IDoc from Vendors (EDI-810 INBOUND). I am getting certain errors.
    Error 1:
    Customer , Vendor XXXXXXX not known
    Message no. FD110
    Error 2:
    G/L Account XXXXXXX can only be posted internally.
    Message no. F5562
    I have tried to trigger IDocs using basic types INVOIC01 and INVOIC02. But all in vain.
    Please rush your answer,
    Cheers
    Maruthi

  • User Exits for Inbound Process

    hi all
    can any one please give some example user exits in inbound process and explain the omportance of user exits
    Thank you,
    Swapna

    hi
    Userxits allow us to add our own functionality to SAP standard program
    without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
    Types of User exits
    1. Menu Exits
    2.Function exits
    3.Table exits
    4.Screen exits
    5.Keyword exits
    6.Field exits.
    also refer to the links below.. can get more info on user exits
    list of user exits
    http://www.planetsap.com/userexit_main_page.htm
    can also get the list of user exits thru..
    Tcode: CMOD -> Utilities -> SAP Enhancements -> F8 Execute
    User Exits Notes:
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/81/8c5738ee806b0ee10000009b38f889/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
    below are some of the useful invound and outbound userexits
    <b>IDoc Inbound User Exits</b>
    1.     ACC_BILLING
    Accounting: Post invoice (OAG: LOAD RECEIVABLE)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    2.     ACC_EMPLOYEE_EXP
    FI/CO: HR posting GL (AcctngEmplyeeExenses)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    3.     ACC_EMPLOYEE_PAY
    FI/CO: HR posting AP (AcctngEmplyeePaybles)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    4.     ACC_EMPLOYEE_REC
    FI/CO: HR posting AR (AcctngEmplyeeRcvbles)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    5.     ACC_GL_POSTING
    Accounting: General G/L account posting
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    6.     ACC_GOODS_MOVEMENT
    Accounting: Post goods movement (OAG: POST JOURNAL)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    7.     ACC_INVOICE_RECEIPT
    Accounting: Post invoice receipt (OAG: LOAD PAYABLE)
    •     ACBAPI01 EXIT_SAPLACC4_001 Accounting: Customer enhancement to BAPI interfaces
    8.     ACLPAY Accounting: Inbound invoice
    •     ACCID001 EXIT_SAPLACC1_031 IDoc ACLPAY: Userexit for creditor in accounting document
    •     ACCID001 EXIT_SAPLACC1_032 IDoc ACLPAY: Userexit for GL posting in accounting document
    •     ACCID001 EXIT_SAPLACC1_033 IDoc ACLPAY: Userexit for taxes in accounting document
    9.     ACLREC
    Accounting: Billing document
    •     ACCID001 EXIT_SAPLACC1_011 IDoc ACLREC: Userexit for debitor in accounting document
    •     ACCID001 EXIT_SAPLACC1_012 IDoc ACLREC: Userexit for GL posting in accounting document
    •     ACCID001 EXIT_SAPLACC1_013 IDoc ACLREC: Userexit for taxes
    10.     ACPJMM
    Posting in accounting from materials management
    •     ACCID001 EXIT_SAPLACC1_021 IDoc ACPJOU: Userexit for GL posting in accounting document
    11.     ARTMAS
    Create and change of material master (Retail)
    •     MGV00003 EXIT_SAPL1001_003 Enhancement for article master: IDoc inbound
    12.     BLAOCH
    Purchasing contract change
    •     MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
    13.     BLAORD
    Purchasing contracts
    •     MM06E002 EXIT_SAPLEINN_001 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_002 Customer enhancements for Idocs: contracts
    •     MM06E002 EXIT_SAPLEINN_003 Customer enhancements for Idocs: contracts
    14.     BLAREL
    Release order documentation for distributed contracts
    •     MM06E001 EXIT_SAPLEINM_004 Customer enhancements for release documentation inbound
    15.     COND_A
    Conditions: master data for price determination
    •     VKOI0001 EXIT_SAPLVKOI_001 Interchange of Conditions: Inbound Processing Modifications E1KOMG Segment
    •     VKOI0001 EXIT_SAPLVKOI_002 Interchange of Conditions: Inbound Processing Customer Segments
    16.     CREMAS
    Distribute vendor master
    •     VSV00001 EXIT_SAPLKD02_001 Inbound: Read and process vendor segments
    17.     DEBMAS
    Customer master
    •     VSV00001 EXIT_SAPLVV02_001 Inbound: Read and update additional customer master segments
    18.     DELINS
    Delivery schedule/JIT schedule
    •     VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
    •     VED40001 EXIT_SAPLVED4_002 Copying Data to Screens for Incoming EDI Docs
    •     VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
    •     VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
    19.     DESADV
    Delivery: Shipping notification
    •     LMELA010 EXIT_SAPLEINM_010 Customer enhancement shipping notification inbound: line item
    •     MM06E001 EXIT_SAPLEINM_006 Customer enhancements for shipping notification inbound
    •     V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    •     V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    •     V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    •     V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    •     V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    •     V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    20.     DOCMAS
    Master document
    •     CVDS0001 EXIT_SAPLCVALE_001 Userexit for ALEDVS (DOCMAS inbound)
    21.     DOLMAS
    Document-object links
    •     CVDS0001 EXIT_SAPLCVALE_003 Userexit for ALEDVS (DOLMAS inbound)
    22.     EDLNOT
    EDL delivery notes
    •     VED40001 EXIT_SAPLVED4_001 Modify Warnings in Table XVBFS
    •     VED40001 EXIT_SAPLVED4_002 Copying Data to screens for Incoming EDI Docs
    •     VED40001 EXIT_SAPLVED4_003 Customer-Specific Changes in the Workflow Parameters
    •     VED40001 EXIT_SAPLVED4_004 Determination of mail receiver during inbound processing
    23.     FIDCC1
    Send entire FI documents (user exit 003/4)
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    •     F050S002 EXIT_SAPLF050_004 FIDCC1 IDoc inbound: Change IDoc / do not process
    •     F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    •     F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
    24.     FIDCC2
    Send entire FI documents (user exit 005/6)
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    •     F050S003 EXIT_SAPLF050_006 FIDCC2 IDoc inbound: Change IDoc / do not process
    •     F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    •     F050S005 EXIT_SAPLF050_009 IDoc inbound: change fields in parked documents
    25.     FIDCMT
    Sending single items for FI-GL
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    •     F050S005 EXIT_SAPLF050_008 IDoc inbound: change fields in ACC structures (FI document)
    26.     FINSTA
    Bank Statement
    •     FEDI0005 EXIT_SAPLIEDP_201 FI-EDI: inbound - bank statement/ Lockbox - Final processing
    •     FEDI0005 EXIT_SAPLIEDP_202 FI-EDI: inbound - bank statement/ Lockbox - Processing of segments
    27.     FIROLL
    General ledger rollup for FI-GL (delta f. line items FIDCMT)
    •     F050S001 EXIT_SAPLF050_002 IDoc inbound: read user-defined IDoc segment
    28.     GSVERF
    Cred. memo procedure
    •     VED50001 EXIT_SAPLVED5_001 User Exit for Condition Value Tolerances in the Self- Billing Procedure
    •     VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
    •     VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
    29.     HRMD_A
    HR: Master data and organizational data (appl. system)
    •     RHALE001 EXIT_SAPLRHA0_002 HR-CA: ALE inbound processing: Export parameter
    •     RHALE001 EXIT_SAPLRHAL_002 HR-CA: ALE inbound processing: Change info type data
    •     RHALE001 EXIT_SAPLRHAL_004 HR-CA: ALE inbound processing: conversion segment/ info type
    30.     INFREC
    Purchasing info record
    •     MMAL0004 EXIT_SAPLMEAI_004 ALE source list distribution: inbound processing userdefined data
    •     MMAL0004 EXIT_SAPLMEAI_003 ALE purchasing info record distribution: inbound processing segments
    31.     INVOIC
    Invoice / Billing document
    •     FEDI0001 EXIT_SAPLIEDI_001 FI-EDI: Invoice receipt - Determine G/L account per invoice line
    •     FEDI0001 EXIT_SAPLIEDI_002 FI-EDI: Invoice receipt - Determine add. acct assignm. per line item
    •     FEDI0001 EXIT_SAPLIEDI_003 FI-EDI: Invoice receipt - Fill the screen field 'Allocation'
    •     FEDI0001 EXIT_SAPLIEDI_004 FI-EDI: Invoice receipt - Determine the segment text
    •     FEDI0001 EXIT_SAPLIEDI_005 FI-EDI: Invoice receipt - Determine the name of the BDC session
    •     FEDI0001 EXIT_SAPLIEDI_011 MM-EDI: Invoice receipt - Determine purchase order item
    •     FEDI0001 EXIT_SAPLIEDI_101 FI-EDI: Invoice receipt INVOIC01 - additional assignment
    •     FEDI0001 EXIT_SAPLIEDI_102 FI-EDI: Invoice receipt INVOIC01 - add data
    •     FEDI0001 EXIT_SAPLIEDI_111 MM-EDI: Invoice receipt INVOIC01 - additional assignment
    •     FEDI0001 EXIT_SAPLIEDI_112 MM-EDI: Invoice receipt INVOIC01 - add data
    •     MRMH0002 EXIT_SAPLMRMH_011 Logistics Invoice Verification:inboud EDI message, company code
    •     MRMH0002 EXIT_SAPLMRMH_012 Logistics Invoice Verification:inboud EDI message, control flags
    •     MRMH0002 EXIT_SAPLMRMH_013 Logistics Invoice Verification:inboud EDI message, assignment
    •     MRMH0002 EXIT_SAPLMRMH_014 Logistics Invoice Verification:inboud EDI message, segments
    •     MRMH0002 EXIT_SAPLMRMH_015 Logistics Invoice Verification:inbound EDI message, before posting
    32.     LIKOND
    Listing conditions
    •     WSOR0001 EXIT_SAPLWSOI_001 Enhancement for assortments: inbound IDoc
    33.     MATMAS
    Material Master
    •     MGV00001 EXIT_SAPLMV02_002 Enhancement for material master IDoc: Update
    34.     MRESCR
    Create reservation
    •     SAPLMEWB EXIT_SAPLMEWB_001 Customer exit for processing of reservations via BAPIs
    35.     ORDCHG
    Purchase order/order change
    •     MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     VEDB0001 EXIT_SAPLVEDB_001 SD EDI incoming change orders: read additional data from IDoc
    •     VEDB0001 EXIT_SAPLVEDB_002 SD EDI incoming change orders: additional data for dynpros
    •     VEDB0001 EXIT_SAPLVEDB_003 SD EDI incoming change orders: further activities after calling
    •     VEDB0001 EXIT_SAPLVEDB_004 SD EDI incoming change orders: closing activities per
    •     VEDB0001 EXIT_SAPLVEDB_005 SD EDI incoming change orders: closing activities by order block
    •     VEDB0001 EXIT_SAPLVEDB_006 SD EDI incoming change orders: setting order type
    •     VEDB0001 EXIT_SAPLVEDB_007 SD EDI incoming change orders: additional checks of IDoc
    •     VEDB0001 EXIT_SAPLVEDB_008 SD EDI incoming change orders: error handling
    •     VEDB0001 EXIT_SAPLVEDB_009 SD EDI incoming change orders: additional checks of IDoc segments
    •     VEDB0001 EXIT_SAPLVEDB_010 SD EDI incoming change orders: manipulation of status ecords
    •     VEDB0001 EXIT_SAPLVEDB_012 SD EDI incoming change orders: change internal table
    36.     ORDERS
    Purchase order / order
    •     MCP20008 EXIT_SAPLMCP2_008 User exit: Processing of purchase order header
    •     MCP20008 EXIT_SAPLMCP2_009 User exit: Processing of purchase order item
    37.     ORDERS
    Purchase order / order
    •     MM06E001 EXIT_SAPLEINM_012 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     MM06E001 EXIT_SAPLEINM_013 MM EDI ORDERS/ ORDCHG: enhancement configuration
    •     VEDA0001 EXIT_SAPLVEDA_001 SD EDI incoming orders: read additional data from IDoc
    •     VEDA0001 EXIT_SAPLVEDA_002 SD EDI incoming orders: additional data for dynpros
    •     VEDA0001 EXIT_SAPLVEDA_003 SD EDI incoming orders: further activities after calling
    •     VEDA0001 EXIT_SAPLVEDA_004 SD EDI incoming orders: closing activities per order
    •     VEDA0001 EXIT_SAPLVEDA_005 SD EDI incoming orders: closing activities by order block
    •     VEDA0001 EXIT_SAPLVEDA_006 SD EDI incoming orders: setting order type
    •     VEDA0001 EXIT_SAPLVEDA_007 SD EDI incoming orders: number of ordering party
    •     VEDA0001 EXIT_SAPLVEDA_008 SD EDI incoming orders: error handling
    •     VEDA0001 EXIT_SAPLVEDA_009 SD EDI incoming orders: additional checks of IDoc segments
    •     VEDA0001 EXIT_SAPLVEDA_010 SD EDI incoming orders: manipulation of status records
    •     VEDA0001 EXIT_SAPLVEDA_011 SD EDI incoming orders: change internal table
    •     WVFB0001 EXIT_SAPLWVFB_002 Customer exists for store order PO confirmationdata seg.
    38.     ORDRSP
    Purchase order / order confirmation
    •     MM06E001 EXIT_SAPLEINM_005 Customer enhancements for order confirmation inbound
    •     MM06E001 EXIT_SAPLEINM_007 Customer enhancements inbound confirmation: reading
    •     MM06E001 EXIT_SAPLEINM_008 Customer enhancements inbound confirmation: final
    •     WVMI0001 EXIT_SAPLWVMI_003 ORDRSP VMI inbound, modification before creating purchase order
    39.     PORDCR
    Create purchase order
    •     SAPLMEWP EXIT_SAPLMEWP_002 Customer exit for processing of purchase orders via BAPIs
    40.     PREQCR
    Create purchase requisition
    •     SAPLMEWQ EXIT_SAPLMEWQ_001 Customer exit for processing of requisitions via BAPIs
    41.     PROACT
    Stock and sales data
    •     WVMI0001 EXIT_SAPLWVMI_002 IDoc PROACT inbound: prior to processing
    42.     REMADV
    Payment advice
    •     FEDI0002 EXIT_SAPLIEDP_101 FI-EDI: Incoming pmnt advice - Extended allocatn of IDOC -> applicatn data
    •     FEDI0002 EXIT_SAPLIEDP_102 FI-EDI: Incoming pmnt adivce - Closing allocatn of IDOC -> applicatn data
    43.     REQOTE
    Inquiry
    •     VEDQ0001 EXIT_SAPLVEDQ_001 SD EDI inbound inquiry: read additional data from IDoc
    •     VEDQ0001 EXIT_SAPLVEDQ_002 SD EDI inbound inquiry: additional data for dynpros
    •     VEDQ0001 EXIT_SAPLVEDQ_003 SD EDI inbound inquiry: further activities after calling
    •     VEDQ0001 EXIT_SAPLVEDQ_004 SD EDI inbound inquiry: closing activities per inquiry
    •     VEDQ0001 EXIT_SAPLVEDQ_005 SD EDI inbound inquiry: closing activities by inquiry block
    •     VEDQ0001 EXIT_SAPLVEDQ_006 SD EDI inbound inquiry: setting inquiry type
    •     VEDQ0001 EXIT_SAPLVEDQ_007 SD EDI inbound inquiry: number of sold-to party
    •     VEDQ0001 EXIT_SAPLVEDQ_008 SD EDI inbound inquiry: error handling
    •     VEDQ0001 EXIT_SAPLVEDQ_009 SD EDI inbound inquiry: additional checks of IDoc segments
    •     VEDQ0001 EXIT_SAPLVEDQ_010 SD EDI inbound inquiry: manipulation of status records
    •     VEDQ0001 EXIT_SAPLVEDQ_011 SD EDI inbound inquiry: change internal table
    44.     SBINV
    Credit memo procedure with invoice creation
    •     VED50001 EXIT_SAPLVED5_002 User Exit for messages in the Self-Billing Procedure SBINV
    •     VED50001 EXIT_SAPLVED5_003 User Exit for Tolerances in the Self- Billing Procedure SBINV
    •     VED50001 EXIT_SAPLVED5_004 Customer-Function for changing invoice data SBINV
    •     VED50001 EXIT_SAPLVED5_005 Customer-Specific Changes in Workflow Parameters
    •     VED50001 EXIT_SAPLVED5_006 Copying Data to Screens for Incoming EDI Docs
    45.     SDPACK
    Packing confirmation
    •     VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling -  Inbound IDoc
    •     VMDE0004 EXIT_SAPLVMDE_004 Shipping Interface: Message SDPACK (Packing, Inbound)
    46.     SDPICK
    Picking confirmation
    •     VMDE0001 EXIT_SAPLVMDE_001 Shipping Interface: Error Handling -  Inbound IDoc
    •     VMDE0003 EXIT_SAPLVMDE_003 Shipping Interface: Message SDPICK (Picking, Receipt)
    47.     SHP_IBDLV_CONFIRM_DECENTRAL
    Confirmation (Inbound Delivery)
    •     V50B0001 EXIT_SAPLV50I_002 User exit for BAPI Verification of Inbound Deliveries
    48.     SHP_IBDLV_SAVE_REPLICA
    BAPI Function Module for Duplication of Outbound Deliveries
    •     V50B0001 EXIT_SAPLV50I_001 User exit for BAPI Duplication of Inbound Deliveries
    49.     SHP_OBDLV_CONFIRM_DECENTRAL
    Confirmation (Customer Delivery)
    •     V50B0001 EXIT_SAPLV50I_004 User exit for BAPI Verification of Outbound Deliveries
    50.     SHP_OBDLV_SAVE_REPLICA
    BAPI Function Module for Duplication of Outbound Deliveries
    •     V50B0001 EXIT_SAPLV50I_003 User exit for BAPI Duplication of Outbound Deliveries
    51.     SHPCON
    Delivery: Shipping confirmation
    •     V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    •     V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    •     V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    •     V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    •     V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    •     V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    52.     SHPMNT
    Shipping outbound
    •     V55K0020 EXIT_SAPLV55K_020 IDoc SHPMNT: Modification Control/ Data before processing
    •     V55K0021 EXIT_SAPLV55K_021 Processing of segments IDoc SHPMNT
    •     V55K0022 EXIT_SAPLV55K_022 Update of user defined tables for inbound IDoc SHPMNT
    53.     SRCLST
    Source List
    •     MMAL0002 EXIT_SAPLMEAI_001 ALE source list distribution: inbound processing segments
    •     MMAL0002 EXIT_SAPLMEAI_002 ALE source list distribution: inbound processing user defined data
    54.     SRVMAS
    Master data service master
    •     BASI0001 EXIT_SAPLBASI_001 Userexit IDoc inbound service master: segment
    •     BASI0001 EXIT_SAPLBASI_002 Userexit IDoc inbound service master: database
    55.     TPSSHT
    Shipping planning system: Transfer planned shipments
    •     V56I0010 EXIT_SAPLV56I_010 IDoc TPSSHT01: Input of planned shipments: Modification of IDoc segments
    •     V56I0010 EXIT_SAPLV56I_011 IDoc TPSSHT01: Input of planned shipments: modification of transport tab, processing
    •     V56I0010 EXIT_SAPLV56I_012 IDoc TPSSHT01: Input of planned shipments: update of own tables
    56.     WHSCON
    Delivery: Stock confirmation
    •     V55K0001 EXIT_SAPLV55K_001 Delivery (inbound): Take data
    •     V55K0002 EXIT_SAPLV55K_002 Delivery (inbound): Prepare processing
    •     V55K0003 EXIT_SAPLV55K_003 Delivery (inbound): Evaluate result
    •     V55K0011 EXIT_SAPLV55K_011 Shipping notification (inbound): Take data
    •     V55K0012 EXIT_SAPLV55K_012 Shipping notification (inbound): Prepare processing
    •     V55K0013 EXIT_SAPLV55K_013 Shipping notification (inbound): Evaluate result
    57.     WMBBIN
    Block Storage Bins
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI04 EXIT_SAPLLIDI_004 Customer enhancement for IDoc WMBBID01
    58.     WMCATO
    Reversal/Reversal request for transfer order
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI03 EXIT_SAPLLIDI_003 Customer enhancement for IDoc WMCAI01
    59.     WMINVE
    Inventory count input
    •     MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDO09 EXIT_SAPLLMDE_003 Customer enhancement for message WMINVE
    •     MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    60.     WMMBXY
    IDoc Report goods movements in IM
    •     MWMIDO08 EXIT_SAPLLMDE_002 Customer enhancement for message WMMBXY (goods movement) inbound
    61.     WMSUMO
    Move storage unit
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI06 EXIT_SAPLLIDI_006 Customer enhancement for IDoc WMSUID01
    62.     WMTOCO
    Transfer order
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI02 EXIT_SAPLLIDI_002 Customer enhancement for IDoc WMTCID01
    63.     WMTORD
    Transfer order
    •     MWMIDO07 EXIT_SAPLLMDE_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDO10 EXIT_SAPLLMDE_004 Customer enhancement for message WMTORD (Create TO) inbound
    •     MWMIDO11 EXIT_SAPLLMDE_005 Customer enhancement for message WMTORD (Create TO) inbound
    64.     WMTREQ
    Create/Cancel transfer order
    •     MWMIDI01 EXIT_SAPLLIDI_001 Customer enhancement for error handling of inbound IDoc
    •     MWMIDI05 EXIT_SAPLLIDI_005 Customer enhancement for IDoc WMTRID01
    65.     WPUBON
    POS interface: Upload sales documents (compressed)
    •     WPUE0002 EXIT_SAPLWPUE_104 IDoc WPUBON01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_105 Check, whether transaction of IDoc WPUBON01 is compressable
    •     WPUE0002 EXIT_SAPLWPUE_106 IDoc WPUBON01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_109 IDoc WPUBON01: after to inbound processing
    66.     WPUFIB
    POS interface: Upload Fin.Acc. interface SRS/POS
    •     WPUE0002 EXIT_SAPLWPUE_130 IDoc WPUFIB01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_131 IDoc WPUFIB01: processing user
    67.     WPUFIB
    POS interface: Upload Fin.Acc. interface SRS/POS
    •     WPUE0002 EXIT_SAPLWPUE_132 IDoc WPUFIB01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_139 IDoc WPUFIB01: after to inbound processing
    68.     WPUKSR
    POS upload cashier data
    •     WPUE0002 EXIT_SAPLWPUE_120 IDoc WPUKSR01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_122 IDoc WPUKSR01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_123 IDoc WPUKSR01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_129 IDoc WPUKSR01: after to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_152 IDoc WPUTAB01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_159 IDoc WPUTAB01: after to inbound processing
    69.     WPUUMS
    POS interface: Upload sales data (compressed)
    •     WPUE0002 EXIT_SAPLWPUE_110 IDoc WPUUMS01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_112 IDoc WPUUMS01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_113 IDoc WPUUMS01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_119 IDoc WPUUMS01: after to inbound processing
    70.     WPUWBW
    POS interface: Upload goods movements
    •     WPUE0002 EXIT_SAPLWPUE_140 IDoc WPUWBW01: prior to update
    •     WPUE0002 EXIT_SAPLWPUE_141 IDoc WPUWBW01: processing user segment
    •     WPUE0002 EXIT_SAPLWPUE_142 IDoc WPUWBW01: prior to inbound processing
    •     WPUE0002 EXIT_SAPLWPUE_149 IDoc WPUWBW01: after to inbound processing
    71.     WVINVE
    Store physical inventory / sales price revaluation
    •     WVFI0001 EXIT_SAPLWVFI_001 Inbound IDoc store phys. inv.: override Customizing
    •     WVFI0002 EXIT_SAPLWVFI_002 Inbound IDoc store phys. inv.: process customer segment
    <b>IDoc Outbound User Exits</b>
    72.     ACCONF
    Confirmation of IDoc processing from the application
    •     ACCID002 EXIT_SAPLACC2_040 IDOC ACCONF: Confirmation of processing in application
    73.     ACLPAY
    Accounting: Inbound invoice
    •     ACCID002 EXIT_SAPLACC2_030 IDoc ACLPAY: Userexit for header in accounting document (outbound)
    •     ACCID002 EXIT_SAPLACC2_031 IDoc ACLPAY: Userexit for creditor line (outbound) in accounting document
    •     ACCID002 EXIT_SAPLACC2_032 IDoc ACLPAY: Userexit for general line (outbound) in accounting document
    •     ACCID002 EXIT_SAPLACC2_033 IDoc ACLPAY: Userexit for tax line (outbound) in accounting document
    74.     ACPJMM
    Posting in accounting from materials management
    •     ACCID002 EXIT_SAPLACC2_020 IDoc ACPJOU: Userexit Userexit for GL posting header in accounting document
    •     ACCID002 EXIT_SAPLACC2_021 IDoc ACPJOU: Userexit Userexit for GL posting line in accounting document
    75.     ARTMAS
    Create and change of material master (Retail)
    •     MGV00003 EXIT_SAPLMV01_003 Enhancement for article master IDoc: Create
    76.     BLAORD
    Purchasing contracts
    •     MM06E001 EXIT_SAPLEINM_016 ALE distribution of contracts outbound enhancement for IDocs
    •     MM06E001 EXIT_SAPLEINM_017 ALE distribution of contracts outbound enhancement for IDocs
    77.     BLAREL
    Purchasing contracts
    •     MM06E001 EXIT_SAPLEINM_003 Customer enhancements of data segment for outbound release documentation
    78.     COND_A
    Conditions: master data for price determination
    •     VKOE0001 EXIT_SAPLVKOE_001 Condition Transmission: Derivation of Filter Object E1KOMG
    •     VKOE0001 EXIT_SAPLVKOE_002 Condition Transmission: Customer segments
    79.     CREMAS
    Distribute vendor master
    •     VSV00001 EXIT_SAPLKD01_001 Outbound: Create vendor segments
    80.     DEBMAS
    Customer master
    •     VSV00001 EXIT_SAPLVV01_001 Outbound: Create additional customer master segments
    81.     DELPKB
    KANBAN call
    •     MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
    •     MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
    82.     DIRDEB
    Preauthorized withdrawal
    •     FEDI0003 EXIT_SAPLIEDP_003 FI-EDI outgoing payments: Save PEXR segments (customer directory)
    83.     DOCMAS
    Master document
    •     CVDS0001 EXIT_SAPLCVALE_002 Userexit for ALEDVS (DOCMAS outbound)
    •     CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
    84.     DOLMAS
    Document-object links
    •     CVDS0001 EXIT_SAPLCVALE_004 Userexit for ALEDVS (DOLMAS outbound)
    •     CVDS0001 EXIT_SAPLCVALE_005 Userexit for filter (ALE outbound)
    85.     FIDCC1
    Send entire FI documents (user exit 003/4)
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    •     F050S002 EXIT_SAPLF050_003 FIDCC1 IDoc outbound: Change data / do not send
    •     F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
    86.     FIDCC2
    Send entire FI documents (user exit 005/6)
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    •     F050S003 EXIT_SAPLF050_005 FIDCC2 IDoc outbound: Change data / do not send
    •     F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    87.     FIDCMT
    Sending single items for FI-GL
    •     F050S004 EXIT_SAPLF050_007 IDoc outbound: change complete IDoc / do not send
    88.     FIPAYM
    Payment data
    •     FIPAYM01 EXIT_SAPLF11A_001 USER-EXIT: message type FIPAYM, header data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_002 USER-EXIT: message type FIPAYM, reference data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_003 USER-EXIT: message type FIPAYM, bank data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_004 USER-EXIT: message type FIPAYM, GL data, outbound
    •     FIPAYM01 EXIT_SAPLF11A_005 USER-EXIT: message type FIPAYM, partner data, outbound
    89.     FIROLL
    General ledger rollup for FI-GL (delta f. line items FIDCMT)
    •     F050S001 EXIT_SAPLF050_001 IDoc outbound: fill user-defined IDoc segment
    90.     GSVERF
    Cred. memo procedure
    •     MRMN0001 EXIT_SAPLMRMN_001 Outbound IDoc for ERS/consignment settlement
    91.     HRMD_A
    HR: Master data and organizational data (appl. system)
    •     RHALE001 EXIT_SAPLRHA0_001 HR-CA: ALE outbound processing: Enhancement for receiver
    •     RHALE001 EXIT_SAPLRHAL_001 HR-CA: ALE outbound processing: Change IDoc
    •     RHALE001 EXIT_SAPLRHAL_003 HR-CA: ALE outbound processing: conversion info type / segment
    92.     INFREC
    Purchasing info record
    •     MMAL0003 EXIT_SAPLMEAO_002 ALE purchasing info record distribution: outbound processing
    93.     INVOIC
    Invoice / Billing document
    •     LVEDF001 EXIT_SAPLVEDF_001 User_Exit controll data IDoc_Output_Invoic
    •     LVEDF001 EXIT_SAPLVEDF_002 User_Exit customer enhancement of segments outbound invoice
    •     LVEDF001 EXIT_SAPLVEDF_003 User_Exit to avoid reading package data
    •     LVEDF001 EXIT_SAPLVEDF_004 EDI Invoice: customer enhancement for reading additional data
    94.     KANBAN
    KANBAN call
    •     MPKD0001 EXIT_SAPLMPKD_001 User exit for control record KANBAN, outbound
    •     MPKD0001 EXIT_SAPLMPKD_002 User exit for EDI
    95.     LIKOND
    Listing conditions
    •     WSOR0001 EXIT_SAPLWSOE_001 Enhancement for assortments: outbound IDoc
    96.     MATMAS
    Material Master
    •     MGV00001 EXIT_SAPLMV01_002 Enhancement for material master IDoc: Create
    97.     ORDCHG
    Purchase order/order change
    •     MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
    98.     ORDERS
    Purchase order / order
    •     MM06E001 EXIT_SAPLEINM_001 Customer enhancements for control record: purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_002 Customer enhancements to data segments, purchasing document, outbound
    •     MM06E001 EXIT_SAPLEINM_011 Final customer enhancement EDI purchase order outbound
    99.     ORDRSP
    Purchase order / order confirmation
    •     MM06E001 EXIT_SAPLEINM_009 MM EDI ORDRSP: customer enhancements tolerances (quantities/ date/price)
    •     MM06E001 EXIT_SAPLEINM_014 MM EDI ORDRSP:enhancement price tolerances
    •     MM06E001 EXIT_SAPLEINM_015 MM EDI ORDRSP: enhancement change of vendor material
    •     SDEDI001 EXIT_SAPLVEDC_001 Customer enhancement for control record of order confirmation
    •     SDEDI001 EXIT_SAPLVEDC_002 Customer enhancement for data records of order confirmation
    •     SDEDI001 EXIT_SAPLVEDC_003 SD EDI ORDRSP: customer enhancement
    •     SDEDI001 EXIT_SAPLVEDC_004 SD EDI ORDRSP:customer enhancement for reading additional data
    •     SDEDI001 EXIT_SAPLVEDC_005 SD EDI ORDRSP: customer enhancement for configuration
    •     SDEDI001 EXIT_SAPLVEDC_006 SD EDI ORDRSP: customer enhancement for configuration structures
    •     SDEDI001 EXIT_SAPLVEDC_007 SD EDI ORDRSP: customer enhancement for header conditions
    •     SDEDI001 EXIT_SAPLVEDC_008 SD EDI ORDRSP: customer enhancement for item conditions
    •     WVFB0001 EXIT_SAPLWVFB_001 Customer exists for store order PO confirmation control seg.
    •     WVFB0001 EXIT_SAPLWVFB_003 Customer exists for store order PO confirmation data seg.
    100.     PAYEXT
    Extended payment order
    •     FEDI0003 EXIT_SAPLIEDP_002 FI-EDI outgoing payments: Save PEXR segments (external payments)
    •     FEDI0004 EXIT_SAPLIEDP_901 FI-EDI outgoing payments: New partner house bank
    •     FEDI0004 EXIT_SAPLIEDP_902 FI-EDI outgoing payments: End of IDoc payment (VBLNR)
    •     FEDI0004 EXIT_SAPLIEDP_903 FI-EDI outgoing payments: End of partner house bank
    101.     PICKSD
    Picking data confirmation to customer delivery
    •     VMDE0002 EXIT_SAPLVMDE_002 Shipping Interface: Message PICKSD (Picking, Outbound)
    102.     PRDCAT
    Product Catalog
    •     WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
    103.     PRDPOS
    Product catalog item
    •     WPCI0001 EXIT_SAPLWPCI_001 User exit for Product cat. IDoc outbound
    104.     PRICAT
    Price list / catalog
    •     VPRE0001 EXIT_SAPLVPRE_001 PRICAT outbound processing (MAMT AUSP MAW1)
    •     VPRE0001 EXIT_SAPLVPRE_002 PRICAT outbound processing (control record)
    •     VPRE0001 EXIT_SAPLVPRE_003 PRICAT outbound processing (IDoc segments)
    105.     PROACT
    Stock and sales data
    •     WVMI0001 EXIT_SAPLWVMI_001 IDoc PROACT outbound: final action prior to sending
    106.     REMADV
    Payment advice
    •     FEDI0003 EXIT_SAPLIEDP_001 FI-EDI: Outgoing pmnt advice - Create extension of segments/ new segments
    107.     REQOTE
    Inquiry
    •     VEDE0001 EXIT_SAPLVEDE_001 Customer enhancement for control record of outbound quotation
    •     VEDE0001 EXIT_SAPLVEDE_003 SD EDI REQOTE: customer enhancement
    •     VEDE0001 EXIT_SAPLVEDE_002 Customer enhancement for data records of outbound quotation
    •     VEDE0001 EXIT_SAPLVEDE_004 SD EDI REQOTE: customer enhancement for reading additional data
    •     VEDE0001 EXIT_SAPLVEDE_005 SD EDI REQOTE: customer enhancement for configuration
    •     VEDE0001 EXIT_SAPLVEDE_006 SD EDI REQOTE: customer enhancement for configuration structures
    •     VEDE0001 EXIT_SAPLVEDE_007 SD EDI REQOTE: customer enhancement for header conditions
    •     VEDE0001 EXIT_SAPLVEDE_008 SD EDI REQOTE: customer enhancement for item conditions
    108.     SRCLST
    Source List
    •     MMAL0001 EXIT_SAPLMEAO_001 ALE source list distribution: outbound processing
    109.     SRVMAS
    Master data service master
    •     BASO0001 EXIT_SAPLBASO_001 Enhancement: service master, check standard service catalog
    •     BASO0001 EXIT_SAPLBASO_002 Userexit IDoc service master: receiver determination
    110.     SYPART
    Partner profiles
    •     SIDOC002 EXIT_SAPLEDI6_001 CA-EDI, Partner-IDoc: Exit after segment E1EDPP1
    •     SIDOC002 EXIT_SAPLEDI6_002 CA-EDI, Partner-IDoc: Exit after segment E1ADRM0
    •     SIDOC002 EXIT_SAPLEDI6_003 CA-EDI, Partner-IDoc: Final exit before sending
    •     SIDOC002 EXIT_SAPLEDI6_004 CA-EDI, Partner-IDoc: Exit after segment E1ADRP0
    •     SIDOC002 EXIT_SAPLEDI6_005 CA-EDI, Partner-IDoc: Exit after segment E1ADRE0
    •     SIDOC002 EXIT_SAPLEDI6_007 CA-EDI, Partner-IDoc: Exit after segment E1EDP13
    •     SIDOC002 EXIT_SAPLEDI6_008 CA-EDI, Partner-IDoc: Exit after segment E1EDP21
    111.     TPSDLS
    Shipping planning system: Transfer delivery
    •     V56I0001 EXIT_SAPLV56I_001 IDoc TPSDLS: Modification of delivery header group
    •     V56I0002 EXIT_SAPLV56I_002 IDoc TPSDLS: Modification of delivery item group
    •     V56I0003 EXIT_SAPLV56I_003 IDoc TPSDLS: Modification of package data group
    •     V56I0004 EXIT_SAPLV56I_004 IDoc TPSDLS: Modification of entire IDoc
    •     V56I0005 EXIT_SAPLV56I_005 IDoc TPSDLS: Modif. of delivery items relevant to shipment
    •     V56I0006 EXIT_SAPLV56I_006 IDOC TPSDLS: User-defined determ. for location substitution
    •     V56I0020 EXIT_SAPLV56I_020 IDoc control record modification in interface SD-TPS
    112.     WBBDLD
    Assortment list: Material data
    •     WBBE0001 EXIT_SAPLWBBI_001 Modification of replenishment list IDoc
    113.     WMCATO
    Reversal/Reversal request for transfer order
    •     MWMIDO02 EXIT_SAPLLIDO_002 Customer enhancement for IDoc WMCAID01
    114.     WMINVE
    Inventory count input
    •     MWMIDO04 EXIT_SAPLLIDO_004 Customer enhancement for IDoc WMIVID01
    115.     WMRREF
    Release reference number
    •     MWMIDO03 EXIT_SAPLLIDO_003 Customer enhancement for IDoc WMRRID01
    116.     WMTORD
    Transfer order
    •     MWMIDO01 EXIT_SAPLLIDO_001 Customer enhancement for IDoc WMTOID01
    117.     WP_EAN
    POS interface: Upload / Download EAN assignments
    •     WPDA0001 EXIT_SAPLWPDA_003 POS interface: Modification of IDoc data for EAN references
    118.     WP_PER
    POS interface: Upload / Download person data
    •     WPDA0001 EXIT_SAPLWPDA_008 POS interface: Modification of IDoc data for person related data
    •     WPDA0001 EXIT_SAPLWPDA_013 POS interface: Add. Change pt. Analysis for WP_PER
    119.     WP_PLU
    POS interface: Upload / Download material master
    •     WPDA0001 EXIT_SAPLWPDA_002 POS interface: Modification of IDoc data for material master
    •     WPDA0001 EXIT_SAPLWPDA_009 POS interface: Add. Change pt. Analysis for WP_PLU
    120.     WPDCUR
    POS interface: Download exchange rates
    •     WPDA0001 EXIT_SAPLWPDA_006 POS interface: Modification of IDoc data for exchange rates
    121.     WPDNAC
    POS interface: Download products
    •     WPDA0001 EXIT_SAPLWPDA_005 POS interface: Modification of IDoc data for follow-on items
    •     WPDA0001 EXIT_SAPLWPDA_011 POS interface: Add. Change pt. Analysis for WPDNAC
    122.     WPDSET
    POS interface: Download set assignments
    •     WPDA0001 EXIT_SAPLWPDA_004 POS interface: modification of IDoc data for set assignments
    123.     WPDSET
    POS interface: Download set assignments
    •     WPDA0001 EXIT_SAPLWPDA_010 POS interface: Add. Change pt. Analysis for WPDSET
    124.     WPDTAX
    POS interface: Download tax rates
    •     WPDA0001 EXIT_SAPLWPDA_007 POS interface: modification of IDoc data for taxes
    125.     WPDWGR
    POS interface: Download material group master
    •     WPDA0001 EXIT_SAPLWPDA_001 POS interface: Modification of IDoc data for material groups
    •     WPDA0001 EXIT_SAPLWPDA_012 POS interface: Add. Change pt. Analysis for WPDWGR
    126.     WPUBON
    POS interface: Upload sales documents (compressed)
    •     WPUE0002 EXIT_SAPLWPUE_102 IDoc WPUBON01: prior to update
    127.     WTADDI
    Additionals
    •     WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
    128.     WTADDI_CVB1
    Additionals w/o 06
    •     WTAD0001 EXIT_SAPLWTIP_001 Enhancements to Additionals IDoc
    General IDoc User Exits
    •     ALE00001 EXIT_RBDPROSE_001 Old: exit for converting preproduction system to production
    •     ALE00001 EXIT_SAPLBD11_001 User exit for the IDOC version changer
    •     BDMO0001 EXIT_SAPLBDMO_001 Old: Enhancement to the ALE distribution reference model
    •     KKCD0001 EXIT_SAPFKCIM_001 SAP-EIS: User exit for data compression of sender records (used for IDoc conversion)
    •     KKCD0001 EXIT_SAPFKCIM_002 SAP-EIS: User exit for data summ. Of summarized records befo (used for IDoc conversion)
    ===
    User exits for Pricing.
    1.•USEREXIT_PRICING_PREPARE_TKOMK (module pool SAPLV60A, program RV60AFZZ
    2.•USEREXIT_PRICING_PREPARE_TKOMP (module pool SAPLV60A, program RV60AFZZ)
    3.•USEREXIT_FIELD_MODIFICATION
    4.•USEREXIT_FIELD_MODIFIC_KZWI
    5.•USEREXIT_FIELD_MODIFIC_KOPF
    User exits for Sales order
    1•USEREXIT_DELETE_DOCUMENT
    2•USEREXIT_FIELD_MODIFICATION
    3.•USEREXIT_MOVE_FIELD_TO_VBAK
    4.•USEREXIT_NUMBER_RANGE
    5.•USEREXIT_SAVE_DOCUMENT
    User exits for billing
    1.•USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
    2.•USEREXIT_ACCOUNT_PREP_KOMPCV
    3•USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
    4•USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB
    5.USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
    ====
    Reward if USeful
    Thanx & regards
    Naren..

  • Inbound process of ALE------- get point.s

    Hi all,
    In WE05 i m able to see my idoc with status 03. Now wht i need to configure further for the correspoinding inbound process, to see my data on the receiver system.
    Regards,
    [email protected]

    Hi
    See this and do accordingly
    Application Linking and Enabling (ALE)
    In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
    For our purpose we have two clients
    namely Client 100 and Client 200.
    System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
    Distribution of Material Master Data Between two Systems
    1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
    To do this follow the following steps
    Execute SALE Transaction Code
    On The Screen Click on Sending and Receiving Systems.
    Then Click on Logical Systems.
    Then Click Defining Logical Systems.
    Click New Entries Button
    (E.g. (LG100 sending system)
    (LG200 receiving system))
    Enter two logical system names and their description.
    Save
    Comeback to SALE Transaction Code screen.
    2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
    LG100 assign to client 100
    LG200 assign to client 200
    To do this, do the following.
    Click Assigning Client to Logical System.
    Ignore the message that comes up on the screen.
    Select client 100
    Click details button on the toolbar icon or press F2.
    In the logical system box, enter LG100.
    Click on the save Icon
    Click the back button.
    Now select client 200.
    Click details icon or press f2.
    In logical Systems box, enter LG200.
    Save
    Back.
    Comeback to SALE Transaction Code screen.
    3) Maintain RFC Destination: (TR.CODE:SM59)
    (Note: Do Not Create This Step)
    Click Create Button on the Screen
    On the Screen Maintain RFC Destination i.e LG200.
    Enter LG200 in RFC destination box.
    Connection type is 3
    Give a description for the RFC destination.
    Maintain Technical Settings on Details on Technical Settings tab
    Target Host as : SAPKDC (NOTE: Save it as a Host Name)
    Maintain Logon Details on Logon/Security tab.
    Language: EN.
    User: MMUSER200 (This is the logon for dist.)
    Client : 200
    Password: MM1234.
    Save.
    Click on create to do the above process for Client 200 in
    The client 200 system.
    4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
    Execute Maintain distribution model directly for
    creating the model.
    Click on change mode button on App tool bar of the Screen.
    Create Model View pushbutton on App tool bar of the Screen.
    A pop screen will appear in which you specify
    Short text as Distribution for MM Data.
    Enter Technical Name as LGMODEL.
    Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
    A popup screen will appear in which you specify
    Model View as LGMODEL.
    Sender as LG100.
    Receiver as LG200.
    Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
    A popup screen will appear in which you specify
    Model View as LGMODEL.
    Sender as LG200.
    Receiver as LG100.
    SAVE.
    On the same screen goto Menubar and select Environment.
    And then select Generate Partner Profiles , then execute it.
    On the Screen specify the Logical System as LG200.
    Then execute the screen.
    Click back.
    Again On the same screen goto Menubar and select EDIT.
    Again select Model View and then select Distribute.
    ****LOGIN to client 200.
    Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
    And then select Generate Partner Profiles , then execute it.
    On the Screen specify the Model View as LGMODEL
    And Specify the Logical System as LG100.
    Then execute the screen.
    Click back.
    *******Switch back to client 100 Session.
    5) Create Material using MM03 Tr.Code.
    Enter the material name as LGMATERIAL
    Industry sector as Mechanical Engineering
    Material Type as Finished Products.
    And then Click on Data Pushbutton on the App tool bar.
    Select views.
    In the select views box for materials check basic data 1 AND 2.
    Click enter icon.
    In the next screen that you get
    Give the text of the material as NEW MATERIAL.
    Base unit of measure as KG.
    Gross Weight as 200.
    Net Weight as 100.
    Weight Unit as KG.
    In the description area language (E) and material description.
    Click Save.
    Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
    6) Execute BD10 to transfer the material in which you specify
    the material as LGMATERIAL and
    message type as MATMAS (client100).
    Then a Screen will be displayed in which it shows that
    1 Master Idoc Generated .. Enter
    1 Communication Idoc Generated..Enter.
    *******LOGIN to Client 200.
    7) Execute BD11 to get the material in which you specify
    the material as LGMATERIAL and
    message type as MATMAS (client200).
    8) Execute Tr.code MM03 and give the material as LGMATERIAL
    and see that the material is displayed as it was in Client 100.
    If not follow these steps.
    9) Execute Tr.code WE19( for rectification of errors in client200).
    Specify the Existing Idoc Number and Executes it .
    A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
    10) Execute Tr.code MM03 and give the material as LGMATERIAL
    and see that the material is displayed as it was in Client 100.
    Now the Material is correctly displayed in Client 200.
    11) Monitoring of IDOCS.
    Transaction Codes:
    IDOC Display of Status: WE 05.
    IDOC Date and Time: WE07.
    Outbound:
    Step 1.  Application document is created when transaction is saved.
             2.  Message control is invoked.
             3.  Messages are processed by system.
             4.  Messages are Edited (if desired).
             5.  Output (ALE /  EDI) is checked
             6.  Validate against Message control record from Partner Profile
             7.  Application Document is saved.
             8.  Entry NAST table is created for every selected output program
                  along with Medium & Timing.
             9.  Check for Process Immediately .
                     If (yes)
                       Determine Processing Program from TNAPR Table.
                     ELSE
                       Execute RSNASTED Program.
           10.  Read Partner Profile to determine Process Code.
           11.  Process Code points to the Function Module & Invoked.
           12.  IDoc is generated. 
           13.  Check for ALE Request.
                        if (Yes)
                            Perform Filters, Conversions, Version Changes etc.
                        Else.
                            IDoc is stored in DATABASE.
    INBOUND:
    Step 1.  EDI Subsystem creates an IDoc file from EDI Messages
            2.   Subsystem calls Functional Module                                 EDI_DATA_INCOMING from startRFC program.
             3.  Data in Control Record is validate against the Partner                       Profile.
            4. IDoc is generated in Database and syntax check is                      carried out.
            5. IDoc file is deleted once file read.
            6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow. 
                       7.  Check for Process Immediately.
                   If NO
                     Execute RBDAPP01 Program
                   Else
                      Read Process Code from Partner Profile        
                           Process Code Points to  Function Module
                     Application Document Posted.     
    further help:
    check url
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training
    And also u can get lots of inof from the below link.
    http://www.sapgenie.com/ale/why_ale.htm
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • IDOCs - create new inbound process code   Error

    Hi
    Regarding Zprocess Code in WE42..
    Que-1
    I have already mainted in BD51 . then
    In we42 , When I provide the Zprocess Code and Enter , the following mesages/information I am getting-
    -> The ALE table is not yet maintained for process code ZPUR !
    -> For entry, access 'Function module for ALE-EDI inbound processing'
    Ques-2
    When I was proving OBJECT TYPE : blank  , I was getting the error as " APPLICATION OBJECT TYPE  is not planned ".
    Does it means to maintain anywhere..?
    Please help in this regard.
    Thanks
    Kalpesh

    Hi KALPESH,
    check the below things and try..
    Process code <give ur zprocess code>
    Description test
    Identification <give ur functionmodule>
    Option ALE
    click on radio button Processing with ALE service
    processing type
    click on radio button Processing by function module
    Now press enter button,now u will get transport request,create the transport request nad then u will get the information message
    'Function module for ALE-EDI inbound processing'.Now press enter ,
    u will get a new screen..now from the drop down list select ur zfucnction module..
    give the application object and press on save button..
    now ur zprocess code will be created.
    HOPE THIS HELPS

  • Triggering Inbound Process

    Hi,
    I have a requirement as follows for INBOUND process.
    1. From Legacy system the file will be created and placed in the SAP application server.
    2. Once the file is placed in the application server of SAP it has to trigger the Inboud Process.
    Can anyone suggest how to do this? also suggest me how the startrfc will be called automatically to trigger the inbound process once the file is placed in the application folder.
    here we are not using sub-system.
    Thanks

    Hi Kathiravan,
    Does your company have an EDI group?  If so, they probably already do something similar to this.  Try asking them about your requirements.
    Aaron
    Points are always appreciated

  • Error while creating inbound process code

    Hi gurus,Iam creating a custom idoc.
    800 -> sender
    810 -> Receiver
    i have completed outbound processing on 800.
    On 810, completed following steps for inbound processing.
    1.) I have added my Inbound FM in BD51.
    2 ) Assigned my FM to Message type and Idoc type in WE57.
    3 ) When adding my FM to process code in BD67, it is showing error that
    “Entry ZSATPC does not exist in TEDE2 - check your entry”.
    { zsatpc is my custom process code }.
    4) While Creating Process Code in WE42 with options [processing with ale service / Processing
    by FM] and saving it is giving error that
    " " is not a valid language.
    And when I saw help (?) regarding this error, the following text appeared in a window.
    Diagnosis
    A key with language "" "" was specified for table "EDE2T". This is not a valid language.
    This applies to field "LANGUA"
    System Response
    The system rejects the key.
    Procedure
    Enter a valid language. This is usually the language you logged on in.
    You logged on in language "EN".
    Table T002 contains a list of valid languages.
    Please solve this error. Give me steps to create inbound process code.
    thanx in advance. Hoping replies soon........
    Satish.

    Dear Satish,
    Very peculiar. The language should come from your log on language. Try to login into the system again. Call we42 again and see if it works.
    Regards, Rakesh

  • Inbound Processing with reference to user defined Message type

    Respected Readers,
    I have created a segment with fields
    Matnr
    mbrsh
    mtart
    vpsta
    maktx
    meins
    matkl(Total 7 fields)
    I have created a idoc also and a message type and assign the idoc with message type.
    Now i have set the communication partners also and created the distribution model with my message type and distributed also to the reciver side.
    Now as it is not the standard message type like MATMAS so we cannot use the tcode BD10 to send the material.Instead of it i have to write the program to create the idoc for sending it.
    So i have created the program for the generation of IDOC.
    Upto here picture is clear.
    In the case of Inbound in standard we use the tcode BD11 to get material but same thing as we are not using the Standard Message type we have to create our program.
    Now in this case i have written a function module and that function module is attached to the process code and process code is attached to the message type and message type is attached to the partner profile.
    i have done the assignments in we57 and bd51 also.
    Now idoc is created in the inbound side with status 70.
    but i am not getting how to upload this data in standard tables Mara and Makt.
    So that if i go to tcode MM02 and give the respective Matnr ,it should display that material.
    First tell me what i have done is the right procedure or i have to make somechanges somewhere .
    Secondly if you please give me the function module code for inbound processing to upload the data in this standard table( mara ,makt)  so that material is created in the reciver side also.i will be very thankful to you.
    I am only using seven fields in creating the material.
    Please kindly send your answers and not links .
    Thanks

    i have done the same thing and used same parameter in import ,export ,tables and exception tab.
    i have written some code also .
    But i am not getting the code to upload the data in the standard tables so that material should be get created automatically as soon as the data get uploaded
    in tables.
    Somewhere i have read that you have to use the BDC concept Call transaction method to upload the data.
    But how to use the BDC code in  Function module , i am not getting.
    Please can you send any example of code for this task.

  • BPM Error Permanent Error in BPE inbound processing

    Hi
    I require some urgent help on this BPM issue.
    We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying ‘Permanent Error in BPE inbound processing’. The scenario works like this.
    SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
    The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
    Regards,
    Indranil

    Hi Indranil,
         You don't see you BPM....
    First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
    Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
    and check if any error is listed there.
    In order to check what is going on in your BPM you can trace it:
                      SXMB_MONI_BPE->Diagnosis Processes with Errors
                      SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
             Hope this helps you....
             Regards,
                Encinas.

  • IDOC failure in R/3 Inbound processing

    Hi
      I was able to successfully generate XML files from Syndicator, but when it comes for processing in R/3 side it get fails all the time with the IDOC err msg : "IDoc included in IDoc packet containing an error: transfer it separate ".
      Kindly adivce how to solve the same.
      thanks in adv
      Alexander

    Hi Ravi
      Let me explain in detail.
      From R/3 to MDM --> All materials in one XML file.
      while from MDM to R/3 --> 3 diiferent IDOC am able to
      see, one for each material in Inbound Processing.
      kindly advice me how to fix the same.
    thanks
    Alexander

Maybe you are looking for