EDI ALE IDOC
Hello Experts,
I am a bit confused by IDOC , ALE.
I know that idoc is an intermediate document.
ALE is a technology.
EDI is a general, non-proprietary concept.
Instead of the definitions, I like to understand from a layman perspective what is IDOC and ALE in terms of their purpose/function and relationship. I think this will be easier to understand for me.
Your support would be much appreciated. Thanks.
regards
P G
You can see documentation about IDOCS and Application Link Enabler on the link below:
http://www.sdn.sap.com/irj/sdn/ale
It has a lot of contents, but also a FAQ page, which can provide the information you need.
Similar Messages
-
Roll Out,EDI,ALE,IDOC,BAPI
HI FRNDS, HOW R U
would u plz send me about the ROLL OUT means,
what is mean of EDI,ALE,IDOCs&BAPI.
what is the difference of these things& what is the use of these things
thank u
with regards
nageshHi
Roll out- Same client is having business in different countries.Instead of customizing again for the countries, we can copy the customizing from the parent country and configure all related to the country specific settings.
EDI-Electronic Data Interchange (EDI) is about doing business and carrying out transactions with your trading partners electronically. EDI covers most things that are traditionally done using paper-based communication.
ALE-ALE is SAP proprietary technology that enables data communications between two or more SAP R/3 systems and/or R/3 and external systems. When a new enterprise resource planning (ERP) solution such as R/3 is implemented, companies have to interface the ERP system with legacy systems or other ERP systems.
ALE provides intelligent mechanisms where by clients can achieve integration as well as distribution of applications and data.
ALE technology facilitates rapid application prototyping and application interface development, thus reducing implementation time.
The ALE components are inherently integrated with SAP applications and are robust, leading to a highly reliable system.
ALE comes with application distribution/integration scenarios as well as a set of tools, programs, data definitions, and methodologies that you can easily configure to get an interface up and running.
BAPI -BAPIs provide a stable, standardized method for third-party applications and components to integrate into the Business Framework. These interfaces are being specified as part of SAP's initiative with customers, partners and leading standards organizations. Also, SAP has implemented the emerging Object Application Group (OAG) specifications with BAPIs.
IDOC-IDoc (for intermediate document) is a standard data structure for electronic data interchange (EDI) between application programs written for the popular SAP business system or between an SAP application and an external program. IDocs serve as the vehicle for data transfer in SAP's Application Link Enabling (ALE) system. IDocs are used for asynchronous transactions: each IDoc generated exists as a self-contained text file that can then be transmitted to the requesting workstation without connecting to the central database. Another SAP mechanism, the Business Application Programming Interface (BAPI) is used for synchronous transactions.
Assgn points if useful.
Regards
Vardhini -
SAP ABAP and EDI/ALE/IDOC
Hi gurus,
I am an ABAP consultant and I am trying to learn EDI/ALE and Idoc, but I am not sure where to start with and what all do I need to cover in it. So can you please tell me how to proceed and what all is reqd. to know about EDI/ALE and Idoc for an ABAP guy and it will be great if you can also send me some documentation .
Thanks,
Rajeev !!!Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
EDI
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI is nothing but Electronic data interchange. SAP will support EDI through Intermediate documents (IDOCS).
EDI (Electronic Document interchange) - EDI is the electronic exchange of business documents between the computer systems of business partners, using a standard format over a communication network.
EDI is also called paperless exchange.
Advantages:
Reduced Data entry errors
Reduced processing time
Availabilty of data in electonic form
Reduced paperwork
Reduced Cost
Reduced inventories and better planning
Standard means of communications
Better business process
EDI has two process
1. Outbound process
2. Inbound process
OP:
1.Application document is created.
2.IDOC is generated
3.IDoc is transferred from SAP to Operating system layer
4.Idoc is converted into EDI standards
5.Edi document is transmitted to the business partner
6.The Edi Subsystem report status to SAP
IP:
1.EDI transmission received
2.EDI document is converted into an IDOC
3.IDOC is transferred to the SAP layer
4.The application document is created
5.The application document can be viewed.
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer. -
How t o alter the Standard Messges that SAP displays in EDI/ALE/IDocs
Hi All
Can anyone tell me how to change/add/modify messages ...Eg. the error messges that are displayed ,such as App Doc not posted because date format was incorrect etc
Is there a SPRO setting for doing these things?Hi,
Messages related to ALE / EDI / IDOC are defined in <b>transaction WE47</b>. You cannot change description of these message. Yes, you can change "Qualification" of the message but it is not recommended. Qualification affect further idoc processing.
Let me know if you need any other information.
Regards,
RS -
Hi All
Please send me some reading material for brief idea regarding ALE/IDOC/EDI.
Thanks
GoutamIDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
IDOCS
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.sapgenie.com/sapedi/idoc_abap.htm
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Have a look at these good links-
EDI
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sapgenie.com/sapedi/edi_sap_training.htm
www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi2.jhtml
http://www.sapgenie.com/sapgenie/docs/i830v3020.xls
http://help.sap.com/saphelp_46c/helpdata/en/0b/2a655d507d11d18ee90000e8366fc2/frameset.htm
http://www.hud.gov/offices/hsg/comp/edi/0306sec1.cfm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b828943d711d1893e0000e8323c4f/frameset.htm
http://www.sapgenie.com/ale/whitepaper.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
EDI
EDI interface is used to link/communicate SAP system to some external system. like .NET application. IDOC's are used for communication purpose.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDEDI/SDEDI.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
ALE/IDOC
ALE interface is mostly used for communication within different R/3 SAP systems. like you have a distributed environment and you need to share data between two SAP systems then you will use ALE/IDOC technique.
http://www.sapgenie.com/whitepapers/ale.htm
http://www.sapgenie.com/ale/index.htm
http://www.sappoint.com/abap.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/ALE_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
check these links.....
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.onestopsap.com/interview-Question/ale/
http://www.onestopsap.com/interview-Question/edi/
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htmhttp://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docPlease check this link for EDI/ALE/IDoc online documentation.
http://www.easymarketplace.de/online-pdfs.php -
About ALE,Idoc, EDI
sir,
what is the purpose of ALE,Idoc and EDI, what is the difference and how they will useful for sap
suggest meHi
can anyone send me the good links for EDI concepts.explain me a bit about the creation process .
EDI is described as the interchange of structured data according to agreed message standards between computer systems, by electronic means. Structured data equates to a simple and direct method of presenting the data content of a document. The method of ensuring the correct interpretation of the information by the computer system is defined by the EDI standard."
EDI is a technique used to communicate business transactions between computer systems of different companies and organizations. Note that sometimes the EDI mechanism deployed at a company is often used to interface to other systems within the same organization."
www.sapgenie.com/sapedi/edi_sap_training.htm
www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Links
IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
IDOCS
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.sapgenie.com/sapedi/idoc_abap.htm
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Have a look at these good links-
EDI
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sapgenie.com/sapedi/edi_sap_training.htm
www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi2.jhtml
http://www.sapgenie.com/sapgenie/docs/i830v3020.xls
http://help.sap.com/saphelp_46c/helpdata/en/0b/2a655d507d11d18ee90000e8366fc2/frameset.htm
http://www.hud.gov/offices/hsg/comp/edi/0306sec1.cfm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b828943d711d1893e0000e8323c4f/frameset.htm
http://www.sapgenie.com/ale/whitepaper.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
ALE/ IDOC/ XML
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
EDI
EDI interface is used to link/communicate SAP system to some external system. like .NET application. IDOC's are used for communication purpose.
<u>
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDEDI/SDEDI.pdf</u>
<u>http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf</u>
ALE/IDOC
ALE interface is mostly used for communication within different R/3 SAP systems. like you have a distributed environment and you need to share data between two SAP systems then you will use ALE/IDOC technique.
<u>http://www.sapgenie.com/whitepapers/ale.htm</u>
http://www.sapgenie.com/ale/index.htm
http://www.sappoint.com/abap.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/ALE_tutorial.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
check these links.....
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
<u>http://www.onestopsap.com/interview-Question/ale/</u>
http://www.onestopsap.com/interview-Question/edi/
http://www.allsaplinks.com/idoc_sample.html
<u>http://www.sap-img.com/abap/ale-bapi.htm</u>
<u>http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm</u><u><u>http://www.sappro.com/downloads/OneClientDistribution.pdf
<u></u></u>http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc</u>Please check this link for EDI/ALE/IDoc online documentation.
<u>
http://www.easymarketplace.de/online-pdfs.php</u>
Thanks
Mohan
Award points if it adds information. -
can any one give me any good object in ale /idocs and BAPI and explain them (senario where that is used and why and how .
i will give you maximun reward points if i can understand that.Hi,
These are some links for ALE/IDOCS.
http://www.erpgenie.com/sapedi/index.htm
http://www.intelligententerprise.com/channels/applications/feature/archive/kasturi2.jhtml
http://www.sapgenie.com/sapedi/edi_sap_training.htm
http://www.sap-img.com/basis/ difference-between-edi-and-idoc.htm
http://www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b592afab52b9e10000009b38f974/content.htm
http://www.help.sap.com/saphelp_nw04/helpdata/ en/35/26b594afab52b9e10000009b38f974/content.htm
http://www.onestopsap.com/interview-Question/edi/
http://www.easymarketplace.de/online-pdfs.php
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.onestopsap.com/interview-Question/ale/
http://www.onestopsap.com/interview-Question/edi/
http://www.allsaplinks.com/idoc_sample.html
http://www.sap-img.com/abap/ale-bapi.htm
http://www.sap-img.com/basis/difference-between-edi-and-idoc.htm
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
Please check this link for EDI/ALE/IDoc online documentation.
http://www.easymarketplace.de/online-pdfs.php
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
[for VA01 use BAPI_SALESORDER_CREATEFROMDAT2]
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
Regards,
Priyanka. -
Getting Error 26 in ALE IDOC scenario .- EDI Syntax Check Error...
Hi..
i am working in ALE Idoc scenario...I am getting Status 3 as well as status 26 in we02 transaction in my custom IDOC scenario for outbound process..
The error is 'EDI- SYntax Check'..
How to remove this error..
Pls help.ya, there is only one segment available in IDOC..named i.e zseg_a .
So , error in postion is avoided..
How to find syntax error then? -
Hi
I am learning some stuff on ALE,EDI and IDOCS... are there any good sites which gives clear step by step procedure for the above.
Thanks in Advance.
SudhiHi Sudhi
You can find details on SAP courses from your country's sap.com site. You can find links from http://www.sap.com/contactsap/countries/index.aspx .
Also some Education Partners of SAP give courses. Some info about these will also be there...
Regards...
*--Serdar -
ALE , EDI and IDOC with MM??
hii
What is ALE, EDI and IDOC in SAP??
How its linked with MM??
Explain the above things with example
ThanksHi!
IDOC = Intermediate Document
IDoc or Intermediate Document is a standard SAP document format. IDoc's allow different application systems to be linked via a message-based interface.
For more detailled information look in SAPNET under
http://service.sap.com/EDI
For exapmle in purchasing:
The IDoc message type ORDERS is used to send a purchase order to a vendor.
EDI = Electronic Data Interchange
EDI stands for Electronic Data Interchange, which means that data is electronically transmitted from one system to another. The main requirement of EDI is that the systems of the communicating partners understand each other. Usually, the data from one partner gets mapped into the format of the other partner and vice versa.
Supporting this there exist EDI standards (named EDIFACT, ANSIX12, ODETTE, VDA, TRADACOMS, SPEC2000, ...), where the data formatting for exchanging documents are specified. Normally the partners agree using a special standard message (for example EDIFACT message ORDERS for a purchase order).
In the SAP system the outgoing data are stored in IDoc format. When processing a receiving document, the Inbound SAP system receives the data in IDoc format too.
Further processing (converting/mapping from IDoc in another format and vice versa) depends on the partner agreement:
If the partners have agreed using a special EDI standard, mapping between IDoc and the EDI standard is necessary. This mapping is not supported by SAP, external converters or EDI subsystems must be installed by the customers for this purpose.
If both systems use SAP software, there is usually no need for mapping (which can save users a lot of money). The two systems are often connected via ALE (Application Link Enabling).
If partners are using XML, the SAP Business Connector can be used. The business connector is a tool used to help customers connect via EDI. It includes routing and mapping and is XML compatible. To read more about XML at SAP go to SAPNet Alias 'XML' (http://intranet.sap.com/XML).
For example:
Vendor can send the invoice by EDI creating an IDoc with message type INVOIC using IDoc Type INVOICxx. He can determine (depending on the partner agreement) how to create an IDoc for Inbound processing with FI or MM-IV.
ALE = Application Link Enabling
ALE is short for Application Link Enabling. Special Basic programs support this functionaliity (see documentation of BC_MID_ALE).
To link applications you have to configure an ALE model. It contains all relevant data about how a system's configuration (normally a central system and assigned local systems) exchange data.
With help of the ALE technology, the distribution of contracts is possible in MM via the following business process:
Contracts that a central purchasing organization distributes to local purchasing organizations to allow the latter to utilize the more favorable conditions they contain for the procurement of materials or external services.Each local purchasing organization sends information on its own release orders back to the central purchasing organization.
For this purpose the contract in the central system can be copied to the local systems (with message BLAORD and COND_A). When a release order to a distributed contract is created in a local system, the release docu is automatically sent to the central system (with message BLAREL) updating the release docu of the contract in the central system.
Precondition for this scenario is, that in all systems the used master data (material, vendor, sources of supply, ...) are the same. This master data can be distributed by ALE, which should be done before sending the contract from the central system. Available message types for distribution of master data are:
MATMAS (ARTMAS in retail system) for material master
CREMAS for Vendor master
INFREC for info record
SRCLST for source list
COND_A for conditions of info record
SRVMAS for service master data
Technical documentation to ALE can be found by path:
Basis Components / Middleware (BC-MID) / Application Link Enabling (BC-MID-ALE)
The most important Transactions for testing Idoc:
WE02 Display IDOC
WE05 IDOC list
WE19 Testing IDOCs
BD87 Status Monitor for ALE Messages (reprocess)
Notes:
456127 FAQ: Electronic Data Interchange (EDI) in Purchasing
536411 Sample scenario for ALE contract distribution (only internally released)
I hope I could help you fruther
Best regards
Erika -
Hi All,
I am a Junior ABAP developer. I am new to EDI, ALE and IDOC's. Could someone help me out how to start with this and the necessary material required to go through!!
Thanks in advance!!HI Penchanta ,
Go through this links for additional information.
1.http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
2.http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
3.http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
4.http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
5.http://www.sapgenie.com/sapedi/index.htm
Regards.
Note: Reward if useful
Also check this link from SDN
(1) /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
(2) /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
(3)http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
(4) idoc
(5)http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/2178a651ce11d189570000e829fbbd/frameset.htm--
--This is for Message Control. See the Left Pane in this web page to get the ALE implementation for BAPI's also.
(6)/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment - Converson Rules Guidelines -
ALE,IDOC's,EDI,BAPI.
hi,
can u help me in getting information about cross applications.
what is cross application indeed.And i want know about ALE,IDOC's,EDI,BAPI.
and what is the relation between RFC AND IDOC.
thanksHi Satya Reddy
This will expalin you every thing ...pl..go through
IDOC-Intermediate documents
BAPI-Business ApplicationProgramInterface
BADI-Bsuiness Addins
RFC-Remote Function call
ALE-Application liniking and enabling
The interface concept of the classic R/3 is based on two different strategies: Remote Function Calls (RFC) and data exchange through IDoc message documents. RFC makes direct and synchronous calls of a program in the remote system. If the caller is an external program it will call an RFC-enabled function in R/3 and if the calling program is the R/3 system it will call an RFC-function in another R/3-system or it will call a non-R/3 program through a gateway-proxy (usually rfcexec.exe). BAPIs are a subset of the RFC-enabled function modules, especially designed as Application Programming Interface (API) to the SAP business object, or in other words: are function modules officially released by SAP to be called from external programs.
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
The philosophical difference between EDI and ALE can be pinned as follows: If we send data to an external partner, we generally speak of EDI, while ALE is a mechanism to reliable replicate data between trusting systems to store a redundant copy of the IDoc data. The difference is made clear, when we think of a purchase order that is sent as an IDoc. If we send the purchase order to a supplier then the supplier will store the purchase order as a sales order. However, if we send the purchase order via ALE to another R/3 system, then the receiving system will store the purchase order also as a purchase order.
Also refer Ravi's weblog
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
XI Customer Polling 2006 Summary of Results
/people/swen.conrad/blog/2007/01/26/xi-customer-polling-2006-150-summary-of-results
Please see the below links
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
In " XI"
IDOC ---> Will be used to sending data in Async mode ...
It is very standard and for better performance Async case
RFC --- > Function module and general will be used to make call to function
sending the function (XI has RFC adapter)
BAPI ---> Other version of RFC (Objected oriented) mostly we will use for Sync
calls (Mostly in XI using proxies we will call BAPI's)
I hope this will answer your question
regards
--- prasad -
ALE / IDOC / RFC / EDI
hi all ,
i m very new for ALE / IDOC / RFC / EDI and i have to do these things , can anybody send me some material
to read these things from starting? and please do clear what shud i read first or plz. tell me the sequence??
my E-mail : [email protected]
regards saurabh.Hai.
check this.
Application Linking and Enabling (ALE)
In this document you will learn the step-by-step procedure to setup the ALE system and go through a transaction between two clients
For our purpose we have two clients
namely Client 100 and Client 200.
System name is SAPKDC (FOR BOTH 100 AND 200 CLIENTS).
Distribution of Material Master Data Between two Systems
1) SETUP LOGICAL SYSTEM: (Note: Do Not Create This Step)
To do this follow the following steps
Execute SALE Transaction Code
On The Screen Click on Sending and Receiving Systems.
Then Click on Logical Systems.
Then Click Defining Logical Systems.
Click New Entries Button
(E.g. (LG100 sending system)
(LG200 receiving system))
Enter two logical system names and their description.
Save
Comeback to SALE Transaction Code screen.
2) Now you have to allocate the created logical systems to respective clients.( Note: Do Not Create This Step)
LG100 assign to client 100
LG200 assign to client 200
To do this, do the following.
Click Assigning Client to Logical System.
Ignore the message that comes up on the screen.
Select client 100
Click details button on the toolbar icon or press F2.
In the logical system box, enter LG100.
Click on the save Icon
Click the back button.
Now select client 200.
Click details icon or press f2.
In logical Systems box, enter LG200.
Save
Back.
Comeback to SALE Transaction Code screen.
3) Maintain RFC Destination: (TR.CODE:SM59)
(Note: Do Not Create This Step)
Click Create Button on the Screen
On the Screen Maintain RFC Destination i.e LG200.
Enter LG200 in RFC destination box.
Connection type is 3
Give a description for the RFC destination.
Maintain Technical Settings on Details on Technical Settings tab
Target Host as : SAPKDC (NOTE: Save it as a Host Name)
Maintain Logon Details on Logon/Security tab.
Language: EN.
User: MMUSER200 (This is the logon for dist.)
Client : 200
Password: MM1234.
Save.
Click on create to do the above process for Client 200 in
The client 200 system.
4) Maintain Distribution Model.(BD64). (ABAPer role starts here)
Execute Maintain distribution model directly for
creating the model.
Click on change mode button on App tool bar of the Screen.
Create Model View pushbutton on App tool bar of the Screen.
A pop screen will appear in which you specify
Short text as Distribution for MM Data.
Enter Technical Name as LGMODEL.
Select Model View and Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG100.
Receiver as LG200.
Again Click on Add Message Type Pushbutton on App toolbar of the Screen.
A popup screen will appear in which you specify
Model View as LGMODEL.
Sender as LG200.
Receiver as LG100.
SAVE.
On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Logical System as LG200.
Then execute the screen.
Click back.
Again On the same screen goto Menubar and select EDIT.
Again select Model View and then select Distribute.
****LOGIN to client 200.
Execute Tr.code BD64 and again On the same screen goto Menubar and select Environment.
And then select Generate Partner Profiles , then execute it.
On the Screen specify the Model View as LGMODEL
And Specify the Logical System as LG100.
Then execute the screen.
Click back.
*******Switch back to client 100 Session.
5) Create Material using MM03 Tr.Code.
Enter the material name as LGMATERIAL
Industry sector as Mechanical Engineering
Material Type as Finished Products.
And then Click on Data Pushbutton on the App tool bar.
Select views.
In the select views box for materials check basic data 1 AND 2.
Click enter icon.
In the next screen that you get
Give the text of the material as NEW MATERIAL.
Base unit of measure as KG.
Gross Weight as 200.
Net Weight as 100.
Weight Unit as KG.
In the description area language (E) and material description.
Click Save.
Now I Created a Material in Client 100 , I want to transfer this data to Client 200.
6) Execute BD10 to transfer the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client100).
Then a Screen will be displayed in which it shows that
1 Master Idoc Generated .. Enter
1 Communication Idoc Generated..Enter.
*******LOGIN to Client 200.
7) Execute BD11 to get the material in which you specify
the material as LGMATERIAL and
message type as MATMAS (client200).
8) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
If not follow these steps.
9) Execute Tr.code WE19( for rectification of errors in client200).
Specify the Existing Idoc Number and Executes it .
A Screen is displayed in which you specify the corresponding Function Module as INPUT_IDOC_MATMAS01 and execute it.
10) Execute Tr.code MM03 and give the material as LGMATERIAL
and see that the material is displayed as it was in Client 100.
Now the Material is correctly displayed in Client 200.
11) Monitoring of IDOCS.
Transaction Codes:
IDOC Display of Status: WE 05.
IDOC Date and Time: WE07.
Outbound:
Step 1. Application document is created when transaction is saved.
2. Message control is invoked.
3. Messages are processed by system.
4. Messages are Edited (if desired).
5. Output (ALE / EDI) is checked
6. Validate against Message control record from Partner Profile
7. Application Document is saved.
8. Entry NAST table is created for every selected output program
along with Medium & Timing.
9. Check for Process Immediately .
If (yes)
Determine Processing Program from TNAPR Table.
ELSE
Execute RSNASTED Program.
10. Read Partner Profile to determine Process Code.
11. Process Code points to the Function Module & Invoked.
12. IDoc is generated.
13. Check for ALE Request.
if (Yes)
Perform Filters, Conversions, Version Changes etc.
Else.
IDoc is stored in DATABASE.
INBOUND:
Step 1. EDI Subsystem creates an IDoc file from EDI Messages
2. Subsystem calls Functional Module EDI_DATA_INCOMING from startRFC program.
3. Data in Control Record is validate against the Partner Profile.
4. IDoc is generated in Database and syntax check is carried out.
5. IDoc file is deleted once file read.
6. Event PROCESSSTATE REACHED is triggered in Idoc Object Workflow.
7. Check for Process Immediately.
If NO
Execute RBDAPP01 Program
Else
Read Process Code from Partner Profile
Process Code Points to Function Module
Application Document Posted.
further help:
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
idoc:
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
EDI:
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
check this.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
rfc:
Electronic Data Interchange
Cross-company exchange of electronic data (for example business documents) between domestic and international business partners who use a variety of hardware, software, and communication services. The data involved is formatted according to predefined standards. In addition to this, SAP ALE technology is available for data exchange within a company.
Refer
http://www.erpgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
EDI FLOW :
Here is some thing which helps you and here the purchase order is taken as example too..
Electronic Data Interchange, or EDI, is the electronic exchange of business data. Using a standard format, EDI provides a method of transmitting business data from one computer to another, without the need to re-key data. This electronic link can result in more effective business transactions. With EDI, paper documents such as invoices can be replaced with electronic transmissions, thus time is saved, and the potential for error is minimized. Data can be exchanged at any time. Related business expenses, such as postage, printing, phone calls, and handling, can also be significantly reduced. EDI can aid in the support of manufacturing efforts, such as Just-in-Time and Third Party Warehousing, and financial efforts, such as Electronic Payments.
What parts of the business cycle can be supported by EDI?
Any business documents that are currently exchanged using paper can be converted to an EDI. Standards. Standards include ANSI X12 and XML/EDI are primarily used in the United States, while EDIFACT is used in Europe and Asia.
How does EDI get started?
EDI gets started when one company contacts another expressing interest in trading business documents electronically using Electronic Data Interchange. The two companies must first determine each other's EDI capabilities. If you do not already know your EDI capabilities, we have prepared a questionnaire to help you determine them. If you are already EDI capable, we will coordinate with your technical staff to determine a testing plan. Upon completion of testing the EDI documents, the appropriate business personnel will set a production start date to begin the exchange of EDI business data. If you are not EDI capable, we recommend you first obtain a commitment from your upper management. Your company will need to allocate resources and capital for software, hardware, testing, possible programming, and training.
What is the flow of EDI?
The flow of EDI depends on the sophistication of your systems and your EDI software. If you have internal purchasing/order entry systems, you will need interface programs that can extract and insert data out of and into these systems. EDI programs that interface with your internal systems are preferred over software that requires re-keying of data. Embassy Software specializes in seemless interface between EDI and your back office systems. Using a purchase order as an example of a business document your customer would send that PO electronically (850) to you. It could be sent either through a VAN (Value Added Network) or through an FTP server. You would take that 850 and convert it either into and ODBC database, a flat file or XML document to be imported into your Order System with the use of EDI Software such as PassportXchange.. Using EDI communication software, which is part of the PassportXchange package you would pull down data at set intervals from the VAN or FTP. These documents are then processed through EDI translation software and output to our order entry system. Finally, an EDI document called a functional acknowledgment (997) is sent to your customer.
check this.
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.sapgenie.com/sapedi/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/72/c18ee5546a11d182cc0000e829fbfe/frameset.htm
https://www.2020software.com/products/Fourth_Shift_Edition_for_SAP_Business_One_Electronic_Data_Interchange.asp
http://downloads-zdnet.com.com/SoftwareandWebDevelopment/SoftwareDevelopmentTools/ElectronicData+Interchange/
http://www.erpgenie.com/sapedi/index.htm
http://www.kostal.com/english/downloads/EDI_AGB_eng.pdfd
regards.
sowjanya.b -
Hi All,
I have a scenario in which EDI IDoc needs to be converted to an ALE IDoc(Basic Type FIDCCP02 ) when sent through SAP-XI.
I need ur help in the following areas :
1.Do I have to create the data type for sender ?
2.How should I mention the File Content Parameters?
Thanks in advance,
LokeshHi,
IF ur sending an IDOC from sender side or receiver side no need to create data type,mesage type and message interface.
if ur senario is to convert EDI data then u have SEEBURGER which is a middle ware which help to convert and EDI standard into XML.
if ur using SEEBURGER then u can take the XSD file from seeburger tool and import it into IR,so no need to create datatype and message type.
Regards,
Phani
Reward Points if Helpful -
ALE/IDOC/EDI - STEP BY STEP TUTORIALS - REQUIRED
HI ABAP EXPERTS,
i WILL BE THANKFUL TO YOU, IF YOU CAN SEND SOME INFORMATION ABOUT ALE/IDOC/EDI.
PLEASE FURNISH ALE/IDOC/EDI - STEP BY STEP TUTORIALS.
THANKS ONCE AGAIN.
SHIVJust go trough the following links ..you will get very good knowledge about ALE/IDOC's:
Link: [http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm]
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Maybe you are looking for
-
Hi! My sister in law got an iPod shuffle that wont work on either hers or mine computer. When I plug it in it will say it needs to be formatted. I answered "yes" just to see what happened and now the iPod wont show up in "My Computer". It just says "
-
Perspective Grid from 3D Extrude Revolve Default
I want to create a perspective grid based on a rectangle that has been 3D extruded and revolved using default settings. The 3D default setting doesn't have any perspective so that means the resulting 3D shape is in 2-point perspective, right? So I sh
-
CS6 indesign can't open doc from CC indesign
I can't open documents I made in CC InDesign in my CS 6 Indesign. I have updater my CS indesign but still won't open documents
-
My iPhone 4 with ios7 wont find any wifi network any solution?
I recently changed my screen and after that my iPhone stoped finding WIFI networks I tried reseting it, puting it in the freezer reseting network settings and still nothing. Any other solution you may have?
-
Rolling logs by date instead of size
Hi Does anyone have an example/solution to share regarding rolling logs by date instead of by size using java.util.logging? Thanks in advance -Dave