EDI file Mapping.. problem with UNT segment..!!

Hi all,
Anyone who worked on EDI files, pls help me..
Doing Idoc to EDI scenario..
I done for all the mapping for all the fields except for the UNT segment and field D_0074
Here i need to provide no of segments in the EDI file...
like
*UNBUNOA:393777:ZZ93139:ZZ080108:09080+++1'
UNH0000016334368DESADV:D:01B:UN:EAN007'
BGM3510094147783+9'
DTM+137:200801080934:203'
DTM+11:200801080934:203'
DTM+17:200801100000:203'
ALI++168165'
RFF+ON:R-08007E'
DTM+171:20080107:102'
NADSU377996::92'
NADST9418GR::92'
CPS1+5'
PAC9+09::9'
MEAPDAAA+KGM:6306.628'
MEACTNPP+NAR:9'
CPS21+3'
PAC109::9F:CHEP'
MEAPDAAA+KGM:256.828'
PCI+33E'
GINAW393100471000832922'
LIN1+19310047208023:SRV'
QTY+12:44'
DTM+36:20090505:102'
CNT+2:2'
UNT240000016334368'
If you observe the above file which is my resultant file.. I need to count all the segments above UNT and pass the value( here total segments are 24) to D_0074 field .
Is it any way we can count all the segments.. and pass the value??
Kindly suggest me ..
waiting for your replys..
Regards
Seema.

Problem here is ..
They have created only SCv Seebutger_EDI_Adpater
but they haven't created for Seebutger_GENERIC_EDI ..
all those mappings will be under Seebutger_GENERIC_EDI .. which they haven;t installed..
thats the problem..
If any one has that UDF .. kindly let me know..
-Seema.

Similar Messages

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

File sharing problems with my Media Player, an A C Ryan

I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I can see and access all the files on the hard disks.
The moment I upgraded to Lion, all such access was lost. The AC Ryan cannot connect to the hard disks any more via the wifi network. it's as though file sharing has stopped completely. I checked the file sharing settings on the iMac and nothing has changed i.e. the disks were shared as usual. After struggling with many possible solutions and failing (I checked out a lot of forums), I reintalled Snow Leopard and the problems were immediately solved.
Is there something seriously wrong with Lion's file-sharing? Has this been fixed in 10.7.2? My friend who has a similar setup (his media player is the WD Live) has exactly the same file sharing problem with Lion.
I would appreciate any feedback. Thanks!

I believe that NTFS-3G has issues with Lion.
I use Paragon NTFS and have had no issues at all. I am pretty sure that NTFS-3G will get updated, but you need to check their site to find out when.

IDOC DELVRY05 TO EDI 856 - Mapping problem

Hi all,
i'm currently working on a outbound mapping with the delivery idoc (DELVRY05) and the EDI 856 (Advance Shipping Notice Definition)
The problem is that i can't map the items for every pack in the structure because the ocurrency doesn't match.
The EDI 856 has a segment called G_SHL (ocurrence 0.200000), that i replicated 4 times for shipping, order, pack and item data
And this segment has a subsegment called G_SHL/S_HL (ocurrence 0.1)
RESULT DESIRED GIVEN BY THE CLIENT: (1 pack/1item)
3     HL1*S~                        ======> S: shipping, 1 hierarchy)
4     TD1CTN251***G223.997*LB~
5     TD5*2ABFSM*CC~
6     REFBM003030987~
7     REFCN086044619~
8     DTM01120080128*180610~
9     DTM06720080204~
10     FOB*PP~
11     N1SFStiefel Labs~
12     N4DULUTHGA*30096~
13     HL21*O~ ======> O: order, 2 hierarchy, 1 was the previous hierarchy)
14     PRF*4064561~
15     HL32*P~ ======> P : Pack, 3 hierarchy, 2 was the previous hierarchy
16     MANGM00000734620052976193~
17     HL43*I~ ======> I: Item , 4 hierchay, 3 was the previous hierarchy
31     LIN*UP073462150651LT45X5147ND00145150605~
32     SN1*12EA~
33     DTM03620090930~
34     HL52*P~ ======> P : Pack, 5 hierarchy, 2 was the previous hierarchy
35     MANGM00000734620052975189~
36     HL65*I~ ======> I: Item , 6 hierchay, 5 was the previous hierarchy
37     LIN*UP073462150651LT45X5147ND00145150605~
38     SN1*12EA~
39     DTM03620090930~
40     HL72*P~ ======> P : Pack,7 hierarchy, 2 was the previous hierarchy
41     MANGM00000734620052975196~
42     HL87*I~ ======> I: Item , 8 hierarchay, 7 was the previous hierarchy
43     LIN*UP073462150651LT45X5147ND00145150605~
44     SN1*12EA~
45     DTM03620090930~
46     CTT*8~
47     SE479220014~
As u see, all packs belong to "2 hierarchy" (order), and items to their correposding pack
(has a comment, the "hierarchy number" is always given by a counter so u won't find the exact number again)
so, the client wants us to create an structure that is like this..
1º Pack
1º item
2º item
2º Pack
1º item
2º item
(the example has only one item, but they say that is going to be with many items)
- The problem is that the structure data of the Idoc doesnt match EDI 856 structure
E1EDL37 (0.99999) -
Pack data -
G_SHL (0.200000)
E1EDL37/E1EDL44 (0.99999) -
Item data -
G_SHL/HL (0.1) <====
i was doing different G_SHL for pack and items but that leaves me with a wrong structure, and with all the hierarchy data wrong for items (since the mapping can't see which item belong to his pack)
1º Pack
2º Pack
3º Pack
1º Item
2º Item
3º Item
- How can i map the structure Pack/item if in the idoc got too many item positions for only one EDI corresponding segment??
Thanks in advance!

Alains,
We have the same tear, pack and item problem with one of our customer in one of my project. To acheive this result with the standard schema is not possible because this is a custom one.
So I would suggest to change the schema in BIC like the occurrence and within the third G_SHL you should have S_HL and within this you should have a S_HL so that for every pack you will have multipe items.
The bottom line is to have the schema as required by your mapping. Once you change the schema deploy the maps in J2EE and use them else it will throw an error in RWB.
Regards,
---Satish

.MSG files. Problem with getting requested values from crawled properites

Hi
I have a lot of msg files on my file server. I use SharePoint Enterprise Serach engine to crawl all these MSGs.
I would like to get extra managed properties out of these files. I am most interested in getting Mail:5(text) / Mail:12(Date and Time) / Mail:53(Date and Time) from MAIL category in Managed Properties.
This thread is very similar to one already posted by SpinnerUp:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/82d69df0-5cb2-4e51-a485-34209e111f4b/problem-with-crawling-msg-files-doesnt-seem-to-return-requested-values-from-crawled-property
Please be aware that I do not use Public Folders. These MSGs are exproted from Outlook and are stored on File Server not Exchange.
I tried to link Crawled Properties to new property however I cannot get any results back.
Thank you for you help.
Regards, Marcin (Please mark as helpful or answered if it helps)

Thank you for your replay.
However I am not keen to write custom connector at this stage.
Is it possible to simply get "Subject", "Sent", "Received" info from msg file and then map it to managed properties.
Does SharePoint create any crawled properties which contain information about let's say "Subject" which then can be used to create managed properties?
I tried playing with "MAIL" properties however I cannot get them to work. I guess this is because the file is a msg file rather than mail which is stored in Exchange Public Folder.
Regards, Marcin (Please mark as helpful or answered if it helps)

JDBC- XI- File Mapping Problem

Hi everyone,
I have the mapping problem. atried a lot of possibilities, but unfortunately nothing helps... JDBC adapter returns (in my case - I'm just selecting SYSDATE from dual) this structure
<resultset>
<row>
<SYSDATE>....</SYSDATE>
</row>
</resultset>
I'm using 2 datatypes:
a, row (it is called so) which is complextype and consists of subelement SYSDATE, which is string
Exastly: row->SYSDATE
b, resultset (it is called so) is complex type which consists of subelement of type row(type a - see above) (and this subelement is also called row) ...and it has of course subelement SYSDATE, which is String (see the data type a above)
Exactly: resultset->row->SYSDATE
The data type b is used for the outbound interface in the message coming from the JDBC Adapter, the type a is used for message type sent into the File Adapter
(exactly: Message1String is the ResutSet Type(b), Message1String2 is the Row(a) type)
Can somebody help me, what is wrong? I do always get mapping error... :O(
Thanx, Peter

So your message type has a different name?
Take the name of your message type and link this to "document name" of your JDBC adapter configuration.
Compare the xml output of the JDBC adapter (take this from the SXMB_MONI payload) with the default structure of the mapping (go to the mapping tool, test mode, create a new test and view the xml structure)
Regards
Stefan

Excel XML map problem with numbers.

Hi Xcelsius gurus,
Once again i need your help.
I use Excel XML maps to get data into my embedded spreadsheet, my data are current year sales per month like below:
115.450,36
220.336,20
189.222,56
200.005,48
just numbers.
After inserting the xml data i am not able to use them. No chart, No list, No gause can present my data. Like there is no data.
I realised that after mapping the XML, spreadsheet's cells showing an error, when i click on error icon there is an option to convert data to number, that fix the problem.
What could i do to solve this issue? Is there any problem with my XML file?
Pease help me with this one, i am confused.

Hi:
   what is your xml file format?
   you can try some ordinary xml format instead, here is a example:
   <?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
<book catalog="Programming">
<title lang="en">C++ Programming Language</title>
<author>Bjarne Stroustrup</author>
<year>998</year>
<price>198.0</price>
</book>
<book catalog="Networking">
<title lang="en">TCP/IP Illustrated</title>
<author>Richard Stevens</author>
<year>1996</year>
<price>156.0</price>
</book>
</bookstore>

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

XSLT Mapping - problem with prefixes when calling template

Hi all,
I am having a problem with using an XSLT mapping in XI to combine various fields from 2 input messages of different structures into a single output message. I understand that XI puts a wrapper around the 2 input messages so the structure of the XML I am mapping is:
<?xml version="1.0" encoding="UTF-8"?>
<ns2:Messages xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
<ns2:Message1>
<ns:(root of first message)>
</ns:(root of first message)>
</ns2:Message1>
<ns2:Message2>
<ns:(root of second message)>
</ns: (root of second message)>
</ns2:Message2>
</ns2:Messages>
Currently my XSL looks like the following:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge" xmlns:javamap="java:systemDate.CurrentDate" version="2.0">
<xsl:output method="xml" version="1.0" encoding="UTF-8"/>
<xsl:param name="inputparam"/>
<xsl:template match="ns2:Messages">
...<xsl:calltemplate name="FormattingTemplate"/>
</xsl:template>
<xsl:template name="FormattingTemplate">
</xsl:template>
</xsl:stylesheet>
When I test the mapping it works fine until it calls the FormattingTemplate. Then it throws out a "transformer exception" error saying the prefix 'ns2' is not mapped to a namespace.
If anyone could tell me where I am going wrong I would be very grateful.
Thanks,
Mike

Hi Udo,
Thanks for your reply.
When testing the stylesheet locally with XMLSpy, it works fine, but I have just noticed that it adds information in the root tag of the target message as follows:
<(root of target message) xmlns:javamap="java:systemDate.CurrentDate" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
I checked the root tag of the target message in XI and it does not automatically add this information. Thus I added it in my stylesheet so the information above is projected in the target message, but the same error message appears when the call template function is called. Do you know if I need to somehow add a namespace to templates other than the main one? If so, do you know how I go about doing that?
Thanks,
Mike

Sender file Adapter, problem with proxy authentication

HI all,
i'm having some problems with the following scenario, i need to configure a sender file adapter which connects to a FTP server. To connect this FTP server i need to set a proxy (and so a username and a password), and i don't know how to do.
From note 821267 seems that the proxy is not supported for an FTP adapter, but the are some workaround like the ones described in the following link
Re: Proxy server inFTP adapter
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=57137
They don't work in my case as i need to se two username (the one for proxy and the one for the ftp server) and i cannot force the proxy use for all XI applications.
Can anyone help me?
Thanks a lot
Aldo

Proxy is necessary to exit the customer local intranet. It's not possible to go outside network without going through the proxy server.
I cannot set the proxy server in file adapter as it's not supported like described in SAp note, a possible workarounf is to force the proxy server in the J2ee stack but in this way all PI calls would use that proxy..

File sharing problems with T500 and T410 and a desktop all running XP Pro SP3

Others have had similar problems with what appears to be an overriding of Windows file sharing by Access Connections.
My three computers, printers and internet modem are networked and working fine both wired and wirelessly except that while the desktop computer in network places can "see" shared folders on the Thinkpads, access to them is denied. Access to desktop shared folders from the Thinkpads works fine.
All the usual sharing settings have been checked and verified by Microsoft support; it does not so far have a solution.
Could this issue please be addressed more thoroughly and/or suitable documentation referenced? I have read the blurb about Access Connections but can't make a lot of sense of it.
Thanks

When you use the Desktop top menu bar Go/Connect to Server and enter
smb://nameofPC
what happens ?

Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Mapping Problem with IF...Else

HI,
im having problems with my if then else condition.
What i want to have. (ORDERS IDOC)
IF E1EDKA1-PARVW = WE and
    E1EDKA1-LIFNR = "XX" then CONSTANT ("true")
else Constant ("false").
If i use only one E1EDKA1 segment ... it works.
If i use many E1EDKA1 segments and use if without else ... it works.
But i cant get it with if then else. I will allways get the else value.
any ideas ?
Gordon
Message was edited by:
        Gordon Breuer

HI,
<b>In your example data only one true and two false right?</b>
try the below UDF
use parvw - removecontext -- UDF -- split byvalue --target node
use lifnr -- remove context --- /
while creating UDF ---Input parvw,lifnr , select the queue option for User defined function
for (int i =0;i < parvw.length;i++){
if parvw(i).equals("WE") && lifnr(i).equals("xx"){
result.addValue("true");
}else
result.addValue("false");
Note the "true" and "false" are not equal to boolean values do not compare.
Regards
Chilla
reward points...
Message was edited by:
        Chandra Sekhar Chilla

EDI file Mapping.. problem with UNT segment..!!

Similar Messages

Maybe you are looking for