EDI GS01 envelope fields question on how they are set.

I had an edi app that used a edisend pipeline and even though I had parties and agreements with GS02 etc defined and set except GS01 it was blank but the documents came out fine for both 940 (OW) and 856 (SH) I never did anything (consciously) to set this
field so I was surprised when I re-wrote the app to use dynamic send ports and GS01 was not being set.
I was able to set it in the message construct in the orchestration but what is driving me crazy is how did it get set before? I thought it was because of the document id in the schema but if this was the case why did changing the app to use dynamic
ports broke it? The schemas are the same ..
Any clarification from the experts would be appreciated.
Regards.
Bico Bielich

ISA and GS values are inserted from party configuration.
If you had schema deployed, EDI sendpipeline will resolve the parties depending upon message type of outgoing message which is Targetnamespace#Rootnode.
In your first case you might have added send port inside agreement.
For Dynamic Send port, please read below:
A dynamic send port enables you to send an interchange to any one of multiple destinations, because it resolves the agreement and determines the destination address based upon the value in the
DestinationPartyName context property.
Note
If you are sending an EDI interchange that is based upon an XML message received, and you are using a passthrough receive pipeline to receive that application, you will have to promote the DestinationPartyName context property. For more information, see Agreement
Resolution and Schema Determination for Outgoing EDI Messages.

Similar Messages

My iMac keeps getting networked by someone. Not sure how they are setting up Bluetooth PAN, VPN and now Adobe which will share my computer info online. I've locked it down, shut off file sharing, made everything inactive except Ethernet connection. How??

An ip address keeps showing up in the proxy setting under the "Bypass proxy settings for these Hosts & Domains." I keep erasing them and they pop back in.

An ip address keeps showing up in the proxy setting under the "Bypass proxy settings for these Hosts & Domains." I keep erasing them and they pop back in.

What is the meaing of the sysmbolic constant value in the header file for UIR file and how they are used

In labwindows after creating the uir then header file is create automatically. There it has define some symbolic constant. As examples of colview.h(from the examples of labwindows )
#define MAINPNL              1       /* callback function: MainPanelCB */
#define MAINPNL_RESULTS      2     /* control type: table, callback function: ResultTableCB */
#define MAINPNL_NEWTEST     3       /* control type: command, callback function: NewTestCB */
My question is how these values 1, 2 and 3 were selected and how they are used in programs ?
If anyone explains, it will be a great help.

When creating a UIR file, CVI editor takes care of assigning constants to the panels / controls you create in it.
The conceptual framework is the following (assuming to treat the file you have reported in your message):
- Within a single UIR file all panels have a unique ID, which is the one you pass to LoadPanel when loading a panel into memory. LoadPanel (0, "myfile.uir", MAINPNL); is then translated to panelHandle = LoadPanel (0, "myfile.uir", 1); , that is: "load the first panel in the uir file". The panel in memory is then assigned a handle, which is guaranted unique by the OS and saved in panelHandle variable
- Addressing a control in a panel is done e.g. using SetCtrlVal (panelHandle, MAINPNL_NEWTEST, xxx); , which again is translated to SetCtrlVal (panelHandle, 1, 3); that is: "Set control #3 in the panel identified by panelHandle to value xxx".
You must not modify the include file associated to the UIR as it is fully maintained by the IDE and is rewritten each time you save the UIR file.
That conceptual framework has some advantages and some caveats:
- You can load the same panel more then once in your program: each instance is independent from the others as each panel handle is unique; in some occasions it may be helpful, e.g. if you need to handle several identical equipments connected to your PC and you can load the same control panel for each unit connected maintaining each of them independent
- If the panel handle is wrong, the system does not warn you of this as it does not know of the symbolic names you are using; if you try that SetCtrlVal command with a wrong handle you are trying to manipulate a control on a panel different from the one you intend: supposing actual panel idientified by the handle has control #3 the maximum you can expect is that you receive an error in case you pass e.g. a string to a numeric, but if controls are of the same type you have no errors or warning at all! This is particularly important when addressing controls on pages of a tab control: each page is really a separate panel with its proper handle that you must retrieve with GetPanelhandleFromTabPage command before addressing the controls on it
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.

Security question keep saying they are wrong and I know they are right. I can't change them cuz when I try it tells me to answer the questions. I have tried everything changing my account and all and still can't get it can some one please help me out.

Go here and select "Reset your password." You will receive an email message with a link that bypasses the questions. You will then be able to select and answer the questions again.

Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

Can anyone tell me how they are handling software distribution for the iPad in an enterprise environment?

The new Business Volume Purchase Program is pretty interesting...it can be used to centrally purchase and distribute paid ( not free) items from the AppStore. We are getting setup to use it. You can keep an eye on licenses etc. You can also use a single centralized form of payment.
http://www.apple.com/business/vpp/

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes?

Is there a DJ app for the Ipad that will read the "start" and "stop time" setting for each individual song, as they are set in the song Options screen in Itunes? The Ipod Touch, by itself does not allow cross-fading, therefore when the stop time is edited short, the song jusst truncates then goes to the next song. I tried the DJay ap and while it would crossfade, it would NOT read the song settings for the stop marker. So now I want to try and Ipad and see if there is an app that will READ the Itune stop settings within the song. I do NOT want an app that will allow me to DO the stop marker. I want an app that will READ the stop marker from the song as it is set in Itunes.

Itunes provides the option for setting the Start and Stop times of each music track. However, the start and stop times do not synchronize to the iPhone. I don't understand why this option is even available as it doesn't work when listening to music on the phone. I have not found another application that will support the start and stop time markets. I have searched quite a bit for this but can't find anything. I hope we can find something.

My itunes keeps asking me to set my permissions. they are set to read and write for all accounts, admin, everybody, etc. don't know why it won't let me download

my itunes keeps asking me to set my permissions. they are set to read and write for all accounts, admin, everybody, etc. don't know why it won't let me download

Ever find a real solution to this? I just posted something similar - been having the issues ever since I started using the mac.
I have 5 mac accounts: 2 of those are admins.
After I installed every program I may possibly want, I redid all my user accounts (as I had been having a lot of permissions issues before that). My (admin) account downloads fine. Another admin account, set up exactly as mine, periodically gets prompted that it doesn't have the right to download.
To avoid duplication, I have a /common/music directory for all itunes accounts music. We have to periodically do a recursive permissions deal on the 2nd admin account so it can put music there, even though that directory is read/write for everyone. Apple's never been able to help me on this...

PDFExport fonts. How they are detected, difference between bold and italic.

Hi,
i am experiencing issues with PDFExport mainly because i don't understand how the engine detects fonts in the original document.
First i will explain my issue:
PDFExport is used on linux machine environment.
Copyright reasons prevents me from using windows fonts for PDFExport. I downloaded some open source fonts, most of time they are working fine. the issues that i have are with the variations the fonts. italicized and bold.
Lets take an example of a .doc file. the file contains Hebrew characters some of them are bolded some italicized and some are regular. the font that .doc used is a windows font called David.
When i use PDFExport with the original David fonts everything works fine and converted correctly to PDF. Since i cannot use windows fonts i resorted to using the Open Source fonts, they too have similar in style to David. they have bold version, italicized version and regular version.
When i use the open source fonts the detection of the font is incorrect. the entire document becomes italic. when i remove the italic version of the font everything is bold. and when i remove the bold version everything becomes regular. -- i am missing the bold and italic styles when they are used in the document.
(note that the original document can use any font it wants not restricted to the Copyright issue)
if i understood how the detection worked, i could modified the open source fonts that i have so that it will detect correctly all the different style (bold and italicized ) correctly.
my first question:
How can i use the Open source fonts and also not lose the bold and italicized styles?
my second question:
2. Is there a way to recieve via the API which fonts the engine looked for and didn't find? it can help me to better understand which fonts i need. and may be look for them and bring them manually.
sometimes even when i used the entire windows fonts folder still the fonts where missing or incorrect. (in the resulted converted PDF 'squares' instead of characters). an API like this may help me look for the missing fonts.
my third question:
is there a general guide or Standard which fonts to use. i wish to use the minimum number of fonts which will get the job done. i.e characters will be visible and not squares, styles (bold and italicized) should not be lost.
my forth question:
How do the engine choose which font to use?

These are very deep technical questions and I assume it will be difficult to find anyone who knows answers on this forum.
You will need to speak with Outside In people (you could also try other conversion component such as OpenOfficeConversion - see http://docs.oracle.com/cd/E23943_01/doc.1111/e10800/c03_pdfi_all.htm#IBRAG238). Contacts to OIT are available at Oracle Outside In Technology, or try to create a SR via Metalink.

Metrics - How they are defined / calculated ?

My customer is analyzing a couple of standard reports. They are asking for the definition or calculation for some metrics like:
a) In the Active Campaign status report
ROI - Return over investment
Cost per closed sale
Cost per leadb) In the Team Sales Effectiveness Analysis report
Average business volume
Success RatePls. is there a way / document that has this information ?
I know that these are in the 'model' or 'OBI repository used' but I dont think we have access to this model.
Txs.
Antonio

ISA and GS values are inserted from party configuration.
If you had schema deployed, EDI sendpipeline will resolve the parties depending upon message type of outgoing message which is Targetnamespace#Rootnode.
In your first case you might have added send port inside agreement.
For Dynamic Send port, please read below:
A dynamic send port enables you to send an interchange to any one of multiple destinations, because it resolves the agreement and determines the destination address based upon the value in the
DestinationPartyName context property.
Note
If you are sending an EDI interchange that is based upon an XML message received, and you are using a passthrough receive pipeline to receive that application, you will have to promote the DestinationPartyName context property. For more information, see Agreement
Resolution and Schema Determination for Outgoing EDI Messages.

Two simple questions: apologies if they are obvious

As a recent convert from Windows, a couple of things are nagging at me. Firstly is there a keystroke or shortcut for end of line or start of line i.e. what I mean is basic cursor control?
Secondly my wife now has a mini-mac. She has a PC keyboard that she carried forward - no shame there that's how they market it! So is there a way of mapping the Mac's keyboard settings to recognize the PC keypad rather than a Mac keyboard e.g. the transposition of the double quote character and the @ sign?
I'm new at this so apologies if it's obvious.
Thanks

I think I've found the answer on the internet. This article explains how British keyboards are not adequately mapped by Apple but how you can do it. It's pretty involved.
http://www.jonnyreeves.co.uk/2007/08/using-a-british-pc-windows-keyboard-on-mac- os-x/

HT5538 I have multiple Apple devices and my family all share one apple ID. I know it is easy to obtain additional IDs but all devices are registered with the same Apple ID. My questions is how do I set up my devices so that we can Facetime between devic

I have multiple Apple devices using the same Apple ID for all devices. I work in the Middle East and my wife is in Russia. I would like to Facetime between my different devices. Is this possible with all devices registered with the same Apple ID. It is just easier for find my iPhone, iPad, MacBook Pro and MacBook Air and for purchasing Apps. Is this possible and how do I set it up.

Create Apple IDs for everyone individually and use that in Settings > Facetime, Settings > Messages, Settings > Game Center but keep the Apple ID used for app and content purchases in Settings > iTunes and App Stores

Songs cut off. someting to do with id3 tags and how they are encoded?

Something very disconcerting is happening; tracks are being cut off before they should. Slowly more and more songs are being 'eaten'.
One correlation does seem to be that they are all encoded with iTunes v4.0.1 and have id3 tag: v2.2. Unfortunately I have no idea what, if anything, this means or what to do about it.
The 'time' display of the song is changed to the point where it cuts off rather than it's true length. I have tried changing the stop time (song info, options tab) but it does not allow me to make it longer.
Currently iTunes 9.0.2 (25) is being used. This problem spans over several updates.

Thanks Mike,
Usually I do get info on a whole album, but I found that doing this for individual songs allows you to view the sorting info, and it was this that was causing the problem - All the sorting info has to be exactly the same for each song within an album for it to sort properly on an ipod. It's weird that the sorting was fine within Itunes, but not on the ipod, but anyway this seemed to solve the problem.

Hyperlinks not working once uploaded when they are set up in iweb

Hi there
I have spent hours trying to crack this. I have designed my new website in iweb09 and triple checked all my hyperlinks are set up which they are. However, when I upload the site to my FTP via Cyberduck only a few of them work. I have also tried to preview it on a PC where more seem to work.
How can I resolve this problem its driving me crazy. I'd appreciate any advice you lot have on this.
My site address is www.sevendaysdesign.co.uk you will see its currently sitting like one flat image but some of these links on the home page have worked on previous uploads but I have never got them all working.
Thanks
Nikki
Message was edited by: sevendaysdesign

An iWeb page has 4 layers :
1. A Navigation layer
2. A Header layer
3. A Body layer
4. A Footer layer.
The names tell you what their purpose is.
The layers have z-index numbers.
I don't know how you managed it, but it appears that all your content is in the nav-layer.
And the Body layer is blocking the top part.
The Footer layer, which is below the Body-layer, covers the bottom part of the nav-layer.
Do Command-Shift-L to see it.
Put content where it belongs. And make sure nothing covers other content.

Phone settings not retained once they are set

Hi everyone,
Has anyone had the unfortunate experience of your settings such as sound, weather, mail, etc. not being retained after making changes to them? My wife just bought this iPhone for me a few days ago and it is updated with the latest version 1.1.4. Also iTunes version is 7.6.2.9.
How does iPhone retain it's settings? Is it a built in battery like an old CMOS battery?
I have performed all of the resets that Apple recommends. It's really going to be uncool to have to replace it after 2 days of use.
Thanks in advance for any help!

Does all of the resets that Apple recommends includes a Reset and a Restore which are different?
The settings are not built in the battery. They are stored in the "Other" designation along with the Music, Video, and Photos designation.
iTunes creates and maintains a backup of your iPhone, which includes your iPhone settings along with any other data not included with the sync process, such as SMS messages, notes created with the Notes application, recent calls, and call favorites.
There are two options when restoring an iPhone - from your iPhone's backup, and as a new iPhone or not from the backup.
If something went awry with your iPhone's backup (which shouldn't occur often), and you restore your iPhone from the backup, you are restoring the same problem.
If you have restored your iPhone from your iPhone's backup and not as a new iPhone, try the latter to see if this makes any difference.
If this doesn't work, as uncool as it may be, you may need to have your iPhone exchanged under warranty if AppleCare or an Apple Store is unable to resolve this for you by any other means.

A question about compilation albums, and how they are sorted...

Hi all,
Right I have loads of one off songs by many artist, or I just have the singles from albums, etc. To save having hundreds of single songs on their own I put them all together in a self-made compilation album with the decade as the album. So I have a 1960s, 1970s, 1980s, 1990s and 2000s album. I also have a Disney album, with all different movies as the artist, I do the same with Musicals. It's just helps with tidying up my library. When I sort by Album I would like the artists to be listed alphabetically, which doesn't always happen. I don't know what to do to make it happen. Especially if I have a full musical soundtrack that has the tracks listed, and I have a few of them. Instead of each artist being separate the tracks are all muddled up and listed numerically. For example the first track of The Book of Mormon is followed by the first track of RENT, then the second tracks come, all the numbered tracks are bundled. I hope that makes sense.
The other issue is when I transfer these songs to my iPhone. I want the album to appear as one album, but I want the artists to be separate. So I want one 'Songs from the Musicals' album but I want to look at artist and see every show listed separately. Again, I hope this makes.
I've seen how to add an 'Album Artist' which I tried, but that just gathers it up all into one artist. So to be clear, I want one album with multiple artists on my iPhone.
If you have any tips or help, it would be greatly appreciated as it's becoming increasingly frustrating trying out different combinations of options to see what might work.
Thank you.

Thanks, if it's a feature of PL/SQL, that will be nice.
But both are bind variables, one is on bind variables peeking and the other is not. it's better for me to keep in mind it has a switch to control the peeking when using bind variables in PL/SQL, as I thought there is no way to avoid peeking when using bind variables...

EDI GS01 envelope fields question on how they are set.

Similar Messages

Maybe you are looking for