Edi mapping with Gentran

Some one guide me in EDI Mapping with Gentran.....for Unix
EX 856
Ramesh

I need Application integration Mapping guied line,,,,any helping documents (rules and steps) or guide or screen shots .....at present i need to do 856 mapping as soon as possible....any help is rewarded max,,,,,,Ramesh
or Documents can send to my mail id [email protected]
Note: Max points will rewareded for your help
Ramesh

Similar Messages

EDI Mapping using Gentran

Hi Friends,
Please give the information on Gentran Mapping of EDI messages using Application Integration or Visual Mapper
Regards,
Nitin Patil

Hi ALL,
Could you please send any document for Gentran mapping.
My email id is [email protected]
Thanks
Martin

Generating IDoc DDF structures for EDI mapping

Hello all,
I am looking for a way to generate IDoc DDF structures to use them in the EDI mapping in Gentran.
I was able to find one on ERPGenie.com (developed by Kevin Wilson) but it is only available for ECC 4.x. We are on ECC 6 and the program gives me an ABAP dump when I try to run it.
Does anyone have the fix for this code? Or perhaps another way to accomplish this task?
Actually, I am only interested in generating the MBGMCR02 IDoc
Thanks for your help
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 12:36 PM

It's been a long time since I have done any IDOC processing.
Go to SE37 and enter the function module IDOC_INPUT_ORDERS. Display the source code. Search for "CALL CUSTOMER". You should see several "CALL CUSTOMER-FUNCTION" lines. These are enhancements where you can manipulate the IDOC data. If you locate the correct one (where the data is read from the IDOC but not yet validated), you should be able to map the partner function value. Double-clicking on the number in quotes will bring you to an "EXIT_" function module. A "ZX" INCLUDE program is referenced. If you haven't used the exit yet, double-clicking on the ZX INCLUDE will create it. The values passed into the function module are available in the INCLUDE.
Ideally, you should create a project in transaction CMOD that references the chosen enhancement. This way you can activate/deactivate without commenting/uncommenting the code in the INCLUDE.

IDOC EDI mapping ..

hi,
Please let me know if my understanding is correct. In SAP EDI setup two people involved, ABAP programmer who customzes the IDOCS, sets up the EDI setup on SAP side like number ranges, partner profiles, condition records, message control etc and monitors the IDOC status till it is transmitted to the EDI subsystem and also the IDOCs received at SAP end.
The other person is an EDI specialist who will map the IDOCs to the EDI doc set based on trading partner requirements in the EDI subsystem.
So the ABAP deveoper need not know anything about the mapping done at EDI subsystem ?? His job is only at the SAP end ?? Am I right ??
thanks
Edited by: sdnuser1 sdnsurname on Mar 20, 2008 6:03 AM

Hi,
Ur assumptions are correct up to some extent...
What will happen SAP EDI implementation proejcts is most of the times it is the SAP technical people responsibility to do the EDI mapping also.
So an ABAPer with EDI knowledege(ABAP/EDI consultant) will take care of SAP EDI settings at SAP side and he/she will develop the mapping document and hand over the same to EDI sybsystem provider.
EDI subsystem people will feed the mapping instructions into EDI subsystem based on ur mapping document.Core EDI people will not understand the SAP terminology and as ABAP/EDI consultant will take of both settings.For an ABAP/EDI consultant also will not be given full access of EDI subsystem and u will only hand over the mapping docuemnt(IDOC segments to EDI standards mapping ) and they will feed the instructiona and get back 2 u for any doubts..
Hope this help.Let me know if u need any help for further understanding..
Rward if helpfulll
ramesh

EDI Mapping

Hi,
As my client is implementing EDI through a trusted link, they had asked me to take care of the mapping section along with the development of interfaces.
As generally the middleware or translator people would do the mapping processes, it is totally new for me.
Please advise me in this regard where to start and what is the my job into this.
Do i have to map the incoming or outgoing edi standards to idoc segments.
If so, what are the all things i need to know and do.
As i have ample time, it would be nice for a quick start into it.
Please help me in this regard.
Thanks in advance,
Anandh.B
Points would be awarded for everyone ............

Anandha,
As you mentioned, EDI mapping is typically done using a middleware tool or EDI Translator. Are they asking you to do mapping in ABAP or is there another tool you are going to use?
If you are going to write ABAP programs to do your mapping you have a big challenge ahead of you. You will need to become familiar with whatever EDI standards you will be mapping from. These standards will have the layout of the messages that you will receive.
If you are going to code all of this in ABAP you don't necessarily have to go to IDOCs however it can be very helpful when loading data. By using SAP's IDOC technology and processing you have better traceability into the transaction posting in your system.
In general this is what you will probably need to know:
1. Which EDI messages you will need to translate
2. Which IDOC types those messages correspond with
3. The structures of both the EDI messages and IDOCs
4. Setup of SAP IDOC system. (Execute area menu WEDI from the main screen in SAP)
5. Set up of the application data for IDOC processing - particularly in the outbound - which partners will be recieving which messages
I am sure there is a lot more but this will hopefully get you started.
Chris

Replacing EDI subsystem with SAP XI

Hi Everyone,
I have a scenario in place where i want to replace the EDI subsystem with SAP XI.
I know that using Content Master is one of the solution but i have also heard that Content Master is having some license issues. Now after Content Master what is the next best solution for parsing the EDIFACT and X12 format files.
Thanks and Regards
Rahul Nawale

Hi Rahul,
SAP Conversion Agent by Itemfield is a data conversion system that enables you to create interfaces between any data formats and XML-based systems. The Conversion Agent can convert unstructured, semi-structured, and structured formats to XML, and the other way around.
Have a look at these links:
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Seeburger EDI Adapter provides an EDI solution on internet via HTTP or AS2 to replace the expensive VAN. It provides some pre-built mappings for IDOC to ANSI X12(810,850,855,856 etc.,) and Idoc to EDIFACT(ORDERS,DESADV,INVOIC etc.,) and has the ability to build your own. These pre-defined mappings transform the IDOC-XML to EDI-XML format.
These transformed EDI-XML messages are then converted to EDI specific format using the Seeburger's BIC(Business Integration Converter)adapter. In addition, Seeburger provides adapters like AS2,FTP(EDI specific) and so on to route these EDI messages to external EDI Partners.
For more i would suggest you to go through these links:
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
Seeburger EDI Adapter leverages SAP XI's Adapter Framework. This Adapter is used to perform conversion between EDI and XML format. It also provides some canned EDI layouts and the ability to build your own. It is used to transfer the EDI message via HTTP or AS2 protocols.
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI.
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
There are also a few ways to use EDI with the ALE system of R3.
inbound EDI to R3
1.use a 3rd party adapter for the EDI protocol(eg.SEEBURDER) from the EDI system,send the produced XML to the XI ,map the xml message to a matching IDoc using the IDoc adapter.
outbound ALE message from R3 to EDI system
1. Configure the ALE system to point to the XI the relevant IDoc (SM59,WE21,WE20...)
2.use a file adapter3rd party EDI adapter and map the fields to the target structure.
have a look at this example:
http://www.ean.se/EANCOM%202000/iftmin/example.htm
Details on how to configure can be found on SDN
I hope this helps....
Regards,
Abhy

Mercator Mapping with XI

Hi All,
Can u please tell me wht is the Mercator Mapping with XI,Suggestions on this would be appreciate.
Thanks
pullarao.

Hi,
Mercator is a Middleware tool like SAP XI.
Mercator is one type EAI Mappining Tool.It is used for the transfer the date from source to target systems.formely it is called Mercator ,now its called as DataStage TX in WBI tools.it is trasfer the all data types like XML,Binary and EDI.
>>> Can u please tell me wht is the Mercator Mapping with XI,
Can you eloborate your question
Regards
Agasthuri Doss

Regarding EDI Map

Hi All,
I created EDI Map . Positioning fieldds are not able to understand.
Please can u guide when a Zfield is there how did u MAP in the document.
Thks & regards
Venkat

Hi suresh suresh ,
Suppose you are having three views to be displayed based on the road map selection.
create three view container Ui Element in the main view
create a node in the component controller with attributes visibility_view1, visibility_view2, visibility_view3.
map the node to the main view.
bind the visibility property of each view container UI element to the corresponding attributes in the newly created node.
Then go to window , embedd each view to corresponding view containers.
now on the action of each step of the road map make the attribute visibility_view to false or true depending on you logic required.
Regards
Sarath

Issue in Color Theme on the map with ADF geographic components

I am facing an issue in bringing up a map using color theme .I can able to bring up a map with color themes using geographic components feature in ADF.
The problem here is 'Edit Color Map Theme' dialog which lists Map Theme in five categories like continents,counties,countries,states_abbrev,states_names.
we had implemented map using Color Theme based on the states_abbrev and found it was working properly.
But after some days we found that the settings we made to work for the map no longer works and resulted in no color theme on the map being displayed on the page.
It was found that the states_names works properly instead of states_abbrev by that time.
But again after some days it didnt work with state_names and we revert back our code to follow state_abbrev so as to get the desired result.
Does somebody know where is the problem and how to approach this issue?

Quick Install is gone.
Database repair doesn't work.
Color coded categories is gone, and as you've discovered Theme colors are gone.
Print to Excel is gone.
Many desktop clients that worked with 4.2 do not work.
It won't work with legacy devces.
and others.... There are lots of complaints about 6.2 scattered around the forums. Personally, the HotSync manager keeps forgetting the connections I've set, and goes to default views.
You aren't missing much of anything, IMHO.
WyreNut
Post relates to: Centro (AT&T)
Message Edited by WyreNut on 02-20-2009 12:18 PM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to add a bing map with pins to a Siena Project

Hi
I just want to add a bing map with the current location and a few nice pins of some nice locations around me. Comming out of a Excel file. Potentially also draw some routing lines into the bing maps.
Any ideas how I can accomplish that goal?
Thank you in advance
wbr.
Joerg

yes you can (there is actaully one on the map, blue square)
The syntax is listed on
http://msdn.microsoft.com/en-us/library/ff701724.aspx
You will however have to build the correct string to included in the image source (which you can do in the source excel or in runtime in siena)
Concatenate is suitable to do that.
http://dev.virtualearth.net/REST/v1/Imagery/Map/Road?pp=47.638197,-122.131378;;1&ms=350,500&key=KEYHERE
the PP indicates the pin actually and the bing map autocenters on that. You have several options listed on the webpage listed above. It's a question of the one fitting you best.
Please note that your bing key is yours so you need to hide it well enough.
Regards
StonyArc

Can i use WebApps to build a Google map with polygon territories instead of points (pins)?

I built a map with Google Maps Engine Pro - http://www.jmbcompanies.com/Services/Mitigation/map.
It showcases territories using a Google map polygon shape. I wrote custom KML to create it. However, with Google Maps Engine pro you cannot create custom hyperlinks. It will link a URL that you put in the data, but you cannot name it or target the parent window, so therefore it opens a new tab for each click to more details. I really want it to open the WebApp detail page for that item within the same window.
So, is there a way to use the BC integrated Google maps technology and show polygons instead of points on the map? I've used {module_webappsmap,20754,a} to place individual locations on a map, but what about territories or polygon areas?
I'm sure that I can create a WebApp to generate the KML for each placeholder. But how do I turn that into a map?
THANKS!!

You can not create a kml file in BC through webapps. Modules do not work in other file types and you do not have server code access to generate a file type of results.
You need to use the google API and do this yourself or you can just use this:
And embed it into a custom field. My Maps

How to lock a specific map with a password in FINDER?

I don't use a password on my mac because you have to fill it out the whole time for ridiculous reasons. But I have one map, with all my financial numbers and invoices, that I want to secure with a password.
How to do that?
I already tried some things but can't figure it out.
Thanks in advance!

not sure what you mean by a map here. if you use a blank admin password (a mistake IMO), pretty much your only option is to create an encrypted disk image using disk utility and put whatever you want protected inside. when the image is unmounted, the only way to mount it is by entering the password you set at the image creation time.

Error in scheduling a mapping with sqlloader ctl file

Hi everyone,
I have been trying to schedule a single mapping which generates sqlloader ctl file. but i get the error
ORA-20001: Begin. initialize complete. workspace set. l_job_audit_execution_id= 20545. ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found ORA-06512: at "USER7.PMAP_TLOG_JOB", line 180 ORA-20001: Please check execution object is deployed correctly. ORA-01403: no data found
but when i attach this mapping with a process flow it works fine. There is no error.
so my question is in OWB is it a must that we should attach the mapping which generates sqlloader ctl file to a process flow and then schedule it or can we schedule a single mapping which generates sqlloader ctl file and what should be the process to schedule a single mapping which generates sqlloader ctl file?
can anyone please help?
Thanks & Regards
Subhasree

Hi Nawneet,
Any suggestions?
can anybody else also help me in this error???
Regards
Subhasree

Runtime-Error after deploying a mapping with the generated script

For example a very easy scenario:
1. Create a table and a view in a DB-schema, witch ist registered as WB-target-schema with the following scripts:
create view v1(c1) as select 'a' c1 from dual;
create table t1(c1 varchar2(1));
2. Import the table and the view into a OWB-module
3. Create a mapping ‘m1’
4. Drag and drop view and table into the mapping
5. Draw an arrow from the view-column to the table-column
6. Save and close the mapping
7. Mark the mapping in the ‘Design Center’ and klick the ‘Generate’-Button
8. Save the generated script ‘M1.pls’ to file
9. Run the script in SQL*Plus, connected with the target-schema (without using the Control Center Manager)
=> very easy right now ;-)
10. Start the mapping with the following script will produce the following error
SQL> declare
2 v_status varchar2(100);
3 begin
4 m1.main(v_status);
5 end;
6 /
declare
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OWB_OWN.WB_RT_MAPAUDIT_UTIL", line 1027
ORA-06512: at "SCOTT.M1", line 2048
ORA-06512: at line 4
If i delete or comment the four WB_RT_MAPAUDIT_UTIL-calls - it work´s fine!
But is this a good advise?
What exactly does the wrapped package ‘WB_RT_MAPAUDIT_UTIL do?
Thanks
jwehner

I just ran into the same problem myself. I used the same technique of saving the generated OWB script to file and then compiling it through sqlplus. When I used the "Deploy" option for the mapping, then the problem went away. So when OWB is deploying the code it seems to be setting something internally that doesn't get set when you simple compile the PL/SQL. I don't know of any workaround to this. I will need it eventually, since I don't want to use the UI to deploy to various test environments and production. Maybe the built-in scripting language is the way to go.

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Edi mapping with Gentran

Similar Messages

Maybe you are looking for