EDI Parner profile Inbound not available

hi friends,
when i am posting in bound IDOC i am getting the error 'EDI: Partner profile inbound not available'.
what could be the problem with this error ?
please suggest me with correct solution .. appriciated as quick response.
According to the error i have done the changes in EDI partner profiles.
- Deepu.

Hi,
Check your Inbound partner profile else.
Check the control record Parameter you are sending ,That may be mismatching with the inbound partner profile paramemeters.
Thanks!

Similar Messages

  • IDoc Receiver, Error in we02 - EDI: Partner profile inbound not available

    Hi All,
    I have a problem when creating a receiver IDoc from XI to R/3.
    I have successfully tested the IDoc when populating the receiver information from the payload. However I want this information to be populated automatically based on the logical systems.
    When I do this I get the following error in the IDoc in R/3:
    EDI: Partner profile inbound not available
    In the control record the sender information is all correct but in the recipient information the partner Number with type LS is populated, but port is not populated.
    I have done the following steps.
    •     the sender is a Business Service so I have created a logical system directly adapter-specific identifiers in the sender service in the integration directory.
    •     In the receiver business system I have imported the logical system into the adapter-specific identifiers in the ID from that specified in the SLD.
    •     In the receiving R/3 system using SALE/BD54 I have created a logical system for the source system.
    •     In the receiving R/3 system using we20 I have created a partner profile of type LS with the same name as the source logical system.
    •     IN PI/XI system in transaction IDX1 I’ve created a port (SAP<SID> where <SID> is the system ID of the receiving R/3 system) and the client of the R/3 system, and the RFC destination of that system (<SID>CLNT<clnt>, as specified in SM59).
    •     In the IDOC Adapter (receiver) I have entered the RFC destination and port matching those created above. All checkboxes are UN-checked eg. take sender from payload, take receiver from payload, Apply control record values from payload, etc. are all NOT checked.
    I think that I’ve done everything correctly, but I get the error in we02 in R/3: “EDI: Partner profile inbound not available.”
    Any help will be greatly appreciated (and rewarded, obviously).
    Thanks,
    Matt.

    HI Matt,
    Can you please copy paste the exact error message....In your error message it will show you Exact partner Number / Logical System name and other parameters...just compared if you have all parameters set in your partner profile comparing to error message...
    If you can giev screen shot of both..then probably would be easy to point out error.
    Hope this will help.
    Nilesh

  • EDI: Partner profile inbound not available Message no. E0337

    Hi Friends,
    I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
    EDI: Partner profile inbound not available
    Message no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /0040000010/LI/VN/INVOIC/MM///
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
    When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
    None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
    Please let me know your thoughts, what could be possible reason and a solution.
    Thanks
    Deepak

    Hi Deepak,
    I am facing the same problem with a different message type.
    But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
    Have you found the reason for this?
    Thanks,
    Florian

  • File2Idoc - Error [EDI: Partner profile inbound not available]

    Hi All,
    I am executing file to Idoc Scenario, It is picking the file from sender & delivering to Idoc as well (fields) in R/3 system and showing chequered flag SXMB_MONI.
    But If go to WE02 in R/3 : It is showing that Partner Profile not availbe , I have already mentioned  in We20 - R/3 system.
    EDI: Partner profile inbound not available
    Diagnosis
    An inbound partner profile could not be found with the following key:
    I checked in Idoc - Control Segments - > It is shwoing Wrong recipient Partner No & Type
    Recipient Information :-
    Partner No - CLNT_300              Expecting   100008
    Partner Type - LS                       Expecting     LI
    Where are to maintain these entries ?
    Please do the needful.
    Regards,
    ~Anshul

    Sandeep,
    I am using simple Idoc Delivery:-
    Idoc:DELINF.DELVRY05      Messgae Type u2013 DELINF     Process Code -- DELV
    But I am getting error in R/3 - WE02
    I checked in all entries in We20
    EDI: Partner profile inbound not available
    Message no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /PEVCLNT100/LS//DELINF////
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    Thanks,
    Anshul

  • EDI: Partner profile inbound not available - message variant

    Hi Friends,
    I am gettin error "EDI: Partner profile inbound not available" when sending message from XI to R/3 on R/3 side.
    I checked to partner profile and it is correctly maintaind .
    One thing I noticed is in the control record of that idoc,under typeinfo tab, message type is orders and message variant is ALW. I dont knw what this message vaeiant means,n where it came from, but when i process idoc in we19 by removing this message variant, its working properly..
    give ur suggestions.
    Thanks........

    Hi Kiran,
         Check your Partner Profile Message Settings in we20.
         [Error: "EDI: Partner profile inbound not available";
    Regards,
    RajeshKumar.D

  • Error 56 "EDI: Partner profile inbound not available"

    I am tring to post IDOC using we19.
    Bu t, I am getting the error 56 "EDI: Partner profile inbound not available"
    Could any one please suggest me ..how to solve the problem.

    Hi Sam,
    When you process the inbound IDoc using standard inbound button, the system will perform validation for a given IDoc control record against the partner profile and file port setup. In your case, there is no inbound partner profile setup (WE2) for the corresponding message type. Therefore, you got an error message 'Partner profile not maintained'.
    When you process the inbound IDoc using inbound function module button, the system will <b>NOT</b> perform validation against the partner profile and file port setup. The system will call directly the inbound FM to process the inbound IDoc. You may get an error based on validation of IDoc data record within the inbound FM.
    In production environment (real case), the system will always validate againts the partner profile and file port setup for incoming IDoc.
    Therefore, it is important to have ALE and IDoc corretly setup for inbound and outbound message types.
    Again, hope this will help.
    Regards,
    Ferry Lianto

  • Error: "EDI: Partner profile inbound not available"

    Hi All,
    iam getting the following error while loading the FI related data.
    "EDI: Partner profile inbound not available"
    Suggestions are appreciated.
    thanks
    Kiran

    Hi,
    Refer the link:
    Re: EDI: Partner profile not active
    With rgdS,
    Anil Kumar Sharma .P

  • Invoice EDI error : EDI: Partner profile inbound not available

    Hi  EDI experts ,
    We are connecting our SAP ECC 6 ( Ehp 4) system to 3rd party system Mincom via SAP PI, to send PO Creation message (Outbound) and receive Vendor Invoice message( inbound).  We already done all the settings..Output determination procedure, Partner Profile ( WE20) , Port creation , Condition Records, EDI settings in SPRO for invoice..etc as below:
    Logical system ( BD54)
    ECC system - EDACLNT112,
    PI systems u2013 IDACLNT210
    Third party u2013 LSMINCOM
    Port ( WE21)
    IDACLNT510 : For PI with RFC destination IDACLNT510
    Partner ( WE20)
    LSMINCOM :  (Partn.Type LS)
    Outbound parmtrs.- Partner Role- LS, Message : ORDERS , Port - IDACLNT510
    Inbound parmtrs.- Partner Role- LS, Message : INVOIC , Message Variant- MM, Process code u2013 INVL, Trigger immediately (Process code INVL have  Identification - IDOC_INPUT_INVOIC_MRM, Option ALE u2013 Processing with ALE services , Processing type- processing by functional module)
    Here PO Creation is working fine . IDoC of PO outbound message have below details :
    Recipient information:
    Port :     IDACLNT510 (Logical system & Port created in WE21 )
    Partner Number :  LSMINCOM   ( Logical system and Partner created in WE20)
    Partn.Type :  LS        
    Function :  LS     
    Sender information:
    Port :  SAPEDA ( donu2019t know how it created..but in WE21..it is not there)
    Partner number:   EDACLNT112 ( Logical system and Partner created in WE20)
    Partn.Type :  LS        
    Partner Role :Blank
    Just started testing, our PI team is sending the IDoC, with wrong information on partner & other data, so inbound IDoC failing with error u201CEDI: Partner profile not availableu201D. Oaky. I reprocessed these failed IDoCs by changing Partner data just opposite (i.e. Sender info as Recipient info & vice versa) to successful PO Creation O/B message in WE19 in EDIDC and when I click on u201CStandard Inboundu201D, then another window open giving error message u201CPartner profile not maintainedu201D and creates new IDoC with status 56
    EDI: Partner profile inbound not availableMessage no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /LSMINCOM/LS//INVOIC///X/
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    Procedure
    Please check the inbound partner profiles.
    Execute function
    I am not getting exactly what inbound partner profile could not be found or what is the problem here . Can anyone suggest me what should be the problem and solution on it ?
    Thanks
    NAP

    Narendra,
    Please advice what was the solution.

  • EDI: Partner profile inbound not available

    Hi All,
    I am doing File to IDOC Scenario.
    File got picked up and every where message is successfull, but when i am checking into WE05 of R3 i am getting an error EDI : Partner Profile not available.
    I have already created partner profile in R3 side and assigned correponding Inbound parameters (Message type, Process Code, etc) but still why this error is coming please provide some help.
    Exact Error details:
    EDI: Partner profile not available
    Message no. E0 332
    Diagnosis
    A partner profile could not be found with the following key:
    /RPV147 /LS/
    This involves the key fields of the table EDPP1:
    -PARNUM partner number
    -PARTYP partner type
    Procedure
    Please check the EDI partner profiles.
    Thnx

    Hi,
        once the idoc is received in SAP R/3 it will try to find the partner profile based on the sender fields in the control record..
    i.e SNDPRN - sender partner...
         SNDPRT - partner type (LS/KU/LF..)
         SNDPFC - Partner funtion...
    compare the partner fields created in partner profile with the fields in control record...
    Check the below wiki end section if still need more info on the same..
    https://wiki.sdn.sap.com/wiki/display/XI/UnabletoconvertSendersystemtoALElogicalsystem
    HTH
    Rajesh
    Edited by: Rajesh on Aug 11, 2010 12:39 PM

  • 'Profile Server Not Available' error when trying to access Profile Manager

    Hello all,
    I'm totally, totally new to OS X Server, but I have a class full of new iMac's and MacBook's that I want to be able to manage all in one go. Don't really mind about File Sharing, access from anywhere in the world etc. but I just want to be able to push updates to all of them at once as well as manage some default settings for them all.
    I've set up most of what I can see I need to do in OS X Server such as the server itself as a .local, Profile Manager, Websites, VPN, Open Directory and Software Update, but when I try to access my .local through any browser, I get the main screen, but get an error page when I try to go into Profile Manager that says 'Profile Server Not Available. Please wait a moment and try again.'
    Can anyone suggest where they think I might be going wrong or need to do? I can give more information or screenshots if needed, juts let me know. Any help super appreciated
    Yours,
    Elliot

    Hey,
    Sorry, because I'm so new I don't quite get what you mean. A little more information is I'm using my MacBook which is connected to the same WiFi network as the other Mac's. What do you mean by the FQDN?
    I'm able to type in the IP address etc. on any other of the Mac's and it loads the 'Welcome to OS X Server' page, it's just when I select Profile Manager, I get the error. Thanks for getting back though, appreciated the quick help.. and I'm still super stuck. I've got a whole day on it today ha.
    Elliot

  • Mac Os X lion Profile server not available

    My Profile Manger appears to start but when I attempt to view the 'Profile Manager' web page to setup devices i have an error "Profile Server Not Available... Please wait a moment and try again'
    In the system log I have the following error message repeated over and over agin....:
    ruby [11504]: Unable to create ProfileManger log file at 'var/log/devicemgr/profilemanager.log' (No such file or directory)
    Is there any solution in the following issue.
    Please help as soon as possible

    Have tried many of the fixes for web services problems that I have found here, and so far nothing resolves this.  I also followed apple's instructions for returning web services to default, and still same problem.  Also tried copying default apache files from clean install, resetting web services... and no luck. 

  • Edi partner profile inbound parameters urgent plz

    hi
    iam trying to make settings for inbound parameters of edi for bank, iam wondering what is partner number if partner type is "b"(bank). my partner number will be bank key or house bank or what , bcoz it is not accepting bank key or house bank id

    Hi,
    In Transaction code FI12 - Change House Bank - Details, there is an push button to create EDI Partner Profiles. Click on that and enter the EDI Partner number. This is not House Bank number / Bank Key. After entering the EDI Partner number, you can click on Partner Profiles and complete the setting up of Partner Profile.
    Thanks
    Murali.

  • Edi partner profile is not found!!!!

    Hi
    I have created an info package in development and i have transported to quality. And trying to load the data from flat file.
    And i have simulated it and it works fine.
    but after loading the data in the monitor it is still yellow. And i got the message.
    EDI : partner profile not found.
    can anyone help me on this!!!
    thanxs
    haritha

    in your bi system. run trans WE20. under Partner type LS you can see your Source System "partner profile". check the existence of your flat file soursystem - "partner profile".
    if it isn't existed you have to create one.
    in case you don't know how to create, freely to ask me.
    Regards,
    Chuong Hoang

  • Partner profile are not available.

    Hi,
    Iam doing file to idoc scenario. when i execute the scenario  idoc is created with error 56 showing partenr profile are not  avaialble. what will be the exact reason partenr profile  in R/3 input parameter is added but still showing the error . Can anybody tel me soultion please.

    Hi Aparna,
    Please see this
    The distribution model describes the ALE message flows between logical systems.
    Use
    You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
    For more information about maintaining the distribution model see the Customizing Implementation Guide (IMG):
    SAP Web Application Server
      IDoc Interface/Application Link Enabling (ALE):
        Modeling and Implementing Business Processes
          Maintaining the Distribution Model
    http://help.sap.com/saphelp_nw04/helpdata/en/0b/2a610f507d11d18ee90000e8366fc2/content.htm

  • Problems with User profile Application not available

    Hi
    Have a 2 tier SP 2010, with SQL server and a single SharePoint2010 server. We have a problem with the User profile Application service.
    The main problem is that we cannot go to "Edit" under Manage User Profiles. If we want to edit a user, we just get an error:
    "Microsoft.Office.Server.UserProfiles.UserProfileApplicationNotAvailableException: No User Profile Application available to service the request. Contact your farm administrator."
    When rebooting the server, we get the following in event viewer: Warning: ASP.NET 2.0.50727.0
    Event code: 3005 
    Event message: An unhandled exception has occurred. 
    Event time: 2/5/2015 12:25:25 PM 
    Event time (UTC): 2/5/2015 11:25:25 AM 
    Event ID: 84d104331476453b88c60a37d7a0b8fe 
    Event sequence: 9 
    Event occurrence: 1 
    Event detail code: 0 
    Application information: 
        Application domain: /LM/W3SVC/1212406818/ROOT-1-130676090755160256 
        Trust level: WSS_Minimal 
        Application Virtual Path: / 
        Application Path: C:\inetpub\wwwroot\wss\VirtualDirectories\14877\ 
        Machine name: SPMACHINE 
    Process information: 
        Process ID: 4668 
        Process name: w3wp.exe 
        Account name: domain\spfarm 
    Exception information: 
        Exception type: UserProfileApplicationNotAvailableException 
        Exception message: No User Profile Application available to service the request. Contact your farm administrator. 
    Request information: 
        Request URL: http://sp2010:2010/_layouts/ProfMngr.aspx?ID=51982fe8-4886-4ebd-ad68-f5934656e54d&IsDlg=1 
        Request path: /_layouts/ProfMngr.aspx 
        User host address: ::1 
        User: domain\spfarm 
        Is authenticated: True 
        Authentication Type: NTLM 
        Thread account name: domain\spfarm
    Thread information: 
        Thread ID: 15 
        Thread account name: domain\spfarm 
        Is impersonating: False 
        Stack trace:    at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplication()
       at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
       at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers._FillSubtypeCollection()
       at Microsoft.SharePoint.Portal.WebControls.ProfileQueryUsers..ctor()
       at ASP._layouts_profmngr_aspx.__BuildControlProfileQuery()
       at ASP._layouts_profmngr_aspx.__BuildControl__control6(Control __ctrl)
       at ASP._admin_admin_master.__BuildControlPlaceHolderMain()
       at ASP._admin_admin_master.__BuildControl__control21()
       at ASP._admin_admin_master.__BuildControl__control2()
       at ASP._admin_admin_master.__BuildControlTree(_admin_admin_master __ctrl)
       at System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)
       at System.Web.UI.Page.get_Master()
       at System.Web.UI.Page.ApplyMasterPage()
       at System.Web.UI.Page.PerformPreInit()
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    Hi Thomas,
    Based on the error message, I recommend to verify the things below:
    Please make sure that User Profile Service is started in Central Administration.
    Please make sure Forefront Identity Manager Service and Forefront Identity Manager Synchronization Service are started in services.msc.
    Change the schedule for the "Timer Service Recycle" job to run during off peak hours, when a small amount of timer jobs are running.
    Check ULS log for more detailed error message.  For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

Maybe you are looking for

  • Adobe after effect problem

    I have a big problem with adobe after effect, I wanted to install the trial version, But after waiting all the download is complete, nothing happened, nothing moved, and I have not been able to found what I download I have no other software from Adob

  • Problem loading Photoshop Elements 9

    My family gave me a legal, store bought Photoshop Elements 9 package about 2 years ago. It worked fine on my old computer for about a year. My PC crashed and I reloaded it on my new PC but it has never loaded. I keep getting an error message that the

  • CS4 Design Standard Serial Number not accepted

    Hi Adobe Community, I recently purchased a MacBook Pro and want to install my "old" CS4 Creative Suite Design Standard on it. I found a page on the Adobe that enables to download CS4 software. They are all here except the Creative Suite Design Standa

  • Change tiff to any format readable for premiere

    I have a picture about my logo. Now its format is tiff and its background is transparent. I would like to change ita format to any format readable for premiere and keeping its background transparent. How can I do that?

  • How to export acrobat plugin as a COM component

    Hi all, I want to export acrobat plugin and its methods as a COM objet so i could be possible to call methods from ouside of acrobat. Please give me any solution. I am not sure that whether it is possible or not. I am not getting any correct way to i