EDI- PI- IDOC without using 3rd party adapter

I want to know if EDI generated flat file (from gentran for example) can be mapped to IDOC file for ECC using PI (inbound ABAP proxy at ECC). Assume there is no third party adapter eg. Seeburger in PI landscape. The created IDOC file at ECC application server can then be posted into ECC using FILE port (partner profile at ECC). Anyone accomplished this in past, please share the experience. Appreciate the feedback.

Hi Aamir,
I have an EDI file which consists of data in a single String,and the string consists of several ~ separators and * as of a normal EDI structure looks like.
Eg: ISA---------*--*---~GS--*---*---**-----*~ and so on..........up to IEA in a single string.
This can be achived by using the FCC?
Please let me know and provide some info.
Thanks

Similar Messages

  • How to determine if my Mac is running correctly without useing 3rd party software

    Is there a way to determine if my Mac is running correctly without involving the use of 3rd party software? Some kind of command line diagnostic?

    Why do you think it's not running correctly? Please let us know the symptoms you are experiencing, without any data how can we tell you what tool to use??

  • 3rd Party adapter on different JVM

    Dear Experts,
    We want to buy a 3rd party adapter for SFTP as that is not supported in standard SAP PI, we are on SAP PI7.0. Can we install the 3rd party adapter on a separate JVM and use it in ID?
    The adapters we are considering are Advantco & Aedaptive.

    Hi Uday,
    We have used Advantco SFTP adapter without any issues. We have deployed it in PI and it work fine.
    Thanks,
    Siva Kumar

  • Collecting Idocs without using BPM

    Hi Experts,
    I am working on a sceanrio, where Idocs are coming from sap and we need to generate a single Flat file out of them.
    For this scenario first we need to collect the Idocs and then process them to make a single file output.
    To achieve the same I am using the BPM to first collect the Idocs and make a packet out of them and then processs it to generate a single flat file.
    Can someone please suggest me that, How can we  achieve the same without the BPM.
    If yes, how can we do that?
    Thanks in advance.
    Regards
    Pradeep

    Pradeep ,
    Option 1 : /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
    here you collect them as a file and file is picked up and sent to the target
    Option 2 :
    in WE20 in ERP set idoc package to 50
    in XI sender idoc channel - package to 50
    XI will receive 50 IDOCs at once...
    (courtesy Michal....till then i thought there is no sender idoc adapter )
    Option 3 : collect using BPM.
    Option 4 : This is what i woould suggest....no need of collecting you can send one idoc at a time generate the file.....why do u want to collect?
    Edited by: Tarang Shah on Mar 20, 2009 7:38 AM

  • Multi-Mapping in IDOC without using BPM ?

    Hi ,
    Please check ..
    Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Regards
    PS

    Solved .. Thx every one .
    Approache Used :
    1. Created mapping  with Change signature on target Message type(idoc) with 1..N Occurence.
    2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
    3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

  • Is it safe to use 3rd party chargers

    is it safe to use 3rd party chargers on the ipod touch 4g or can it mess up the touchscreen or should i get the official apple ones because i have heard some of them blowing up :O and catching fire so do they get hot while they are charging (uk 3 pin) thanks

    I sometimes charge mine from my iPad 1 charger or my Griffen charger I purchased from my 3G Nano.
    s.salmanhussain10 wrote:
    bob please tell me so its safe to charge from ipad original charger? n from any iphone(original/3rdparty) charger ?
    thanx

  • How can i telnet or get access to other LAN members in LAN without using third party software?

    I have admin access to the main  router in our LAN, so how can i telnet or get access to other LAN  members in LAN without using third party software?
    its linksys3500 router and  i login as admin using the gateway address in address bar..
    i  want to access the c drive of my colleague in same subnet in same  office and i know his ip address.but he not configured telnet accept  request.so without it how can i open his telnet port and access him

    I think you are using the wrong terminology. You can browse the hidden share of any pc if you know the ip and have a valid user account on the pc by typing in the following \\computername\c$ or \\ipaddress\c$ . It should prompt you for a user account. You may have to allow this through the windows firewall (or disable it completely).

  • I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?

    I have admin access to the main router in our LAN, so how can i telnet or get access to other LAN members in LAN without using third party software?
    its linksys3500 router and  i login as admin using the gateway address in address bar..
    i want to access the c drive of my colleague in same subnet in same office and i know his ip address.but he not configured telnet accept request.so without it how can i open his telnet port and access him

    Duplicate post. 

  • Getting chapters from PPro 2.0 into Encore 2.0 while using 3rd party encoder

    Placing chapters in Premiere is a HUGE time saver. However, I also like to use 3rd party software to encode my videos to MPEG (Canopus ProCoder2.0). This process loses the Chapter information that the .avi file carries. Is there any way to get the chapter information into Encore while still using ProCoder?

    Ok, thanks. I really wish Adobe would allow users to import and export chapter information. That would greatly increase my workflow. The thing that kills me is that in Encore 1.0, the chapters were connected to the timeline, not the video. So I could drop the AVI file into a timeline in Encore to create the chapter points, then delete it and place my MPEG video in its place. But Adobe got rid of this capability in 1.5.

  • PKI setup using 3rd party certificates

    I want to configure SCCM in our environment using are existing certificate creation infrastructure. I do not want to use Microsoft Certificate services. Instead I'd rather use our OpenSSL solution. However I cannot find good documentation to work with using
    3rd party certificates. Everything is related around Microsoft's certificate services.
    Has anyone had any luck implementing SCCM in this manor? Documentation available to aid?

    So we are planning to setup https across the board and going through the blogs and TechNet article - I see that internal PKI is a requirement and you just cannot do away with 3rd party/external certificate, correct ??
    I am working on a scenario where the customer does not want to implement internal PKI but use external certificate either by GoDaady or Thawte or VeriSign where possible at all times but looks like you can't use the external certificate to act as ConfigMgr
    Web Certificate or ConfigMgr DP Cert?
    given the following scenario
    https://social.technet.microsoft.com/Forums/en-US/ac34ebdf-c932-4075-b4a3-ebe572ffab0e/scenario-multi-tenant-configmgr-2012-r2-and-same-ip-address-range-for-multiple-customer?forum=configmanagerdeployment#868600a8-e8eb-471a-b767-761305636041
    for clients to communicate to DP's/Secondary Sites configured in HTTPS, we still need internal PKI ?
    I guess the answer is yes to all.. but just confirming :)

  • Cisco IOS CA using 3rd Party Certificate

    Hi,
    Can I use 3rd Party certificate such as verisign, on Cisco IOS CA ? All i can see on cisco.com is self-signed certificate from router.
    Thanks
    -santo-

    Santo,
    That's fair enough. A key information to make sure customers understand that a private PKI infrustructure is (for the purpose of deployment such as GETVPN) as secure as provided by third part party.
    Private PKI is not based on self signed certificates - only the root CA might need something like it :-)
    That being said, for reliability and flexability I really suggest storing CA (ser, CRL, OCSP, backup of public/private keys) files on storage external to the router.
    Key takeway is that a properly managed private PKI solution for deployments like DMVPN/GETVPN others is as secure as external 3rd party services (and often time order of magnitude cheaper).
    M.

  • What is the difference between Outlook features using exchage server and using 3rd party mail server ?

    Hi~ I'd like to know what the difference is between Outlook features using exchage server and using 3rd party mail server.
    If I use 3rd party mail server with Outlook, Outlook features are the same as Exchange Server ?
    I want to use all Outlook features..

    The basic features (and many advanced features) are identical in all accounts. With pop3, your mail, calendar, contacts, tasks, notes are stored in a pst and are only on the computer. IMAP accounts only sync email back to the server, not calendar,
    contacts, and tasks. Outlook.com EAS accounts (aka Hotmail) syncs calendar and contacts back to the server. Exchange mailboxes stores everything on the server - mail, calendar, contacts, custom views, rules - and if you open the mailbox in outlook on
    any other computer, the mailbox is identical. Because everything is on the server, you'll have much better syncing with smartphones and tablets with Exchange mailboxes.
    Calendar sharing, open other users folder, and retention policies are Exchange-only. Mail Tips and apps (linked under the reading pane header in Outlook 2013) are Exchange-only.
    Diane Poremsky [MVP - Outlook]
    Outlook & Exchange Solutions Center
    Outlook Tips
    Subscribe to Exchange Messaging Outlook weekly newsletter

  • Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

    Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

    10.6.8 won't run on a PowerPC Mac. 
    10.6.8 also won't run the latest Java.  Here's what version of Java you can run:
    https://discussions.apple.com/docs/DOC-5532

  • Does any one used 3rd party components like ICEFaces ?

    Hi
    Thank you for reading my post.
    does any one used 3rd party components like ICEFaces components with Creator Studio?
    What are other components pack that we can use in Creator?
    thanks

    OK, thanks to Peter Hanusiak, and Oracle Consulting consultant in Slovakia, I have resolved my issue and I'm hoping that the same solution may apply for you. See below for the instructions from Peter that helped me out. Note that since our applications are different, the specific libraries and locations that you need to confirm compatibility for may be different.
    Hope this helps,
    Dave
    I had similar problem. And in my case it was caused by different ADF from JDev and SOA Suite and SOA order booking demo.
    Because I can't test it now, I'll tell just what I remember.
    In SOADEMO is somewhere folder SOADEMO-CLIENT\UserInterface\public_html\WEB-INF\lib
    where you can find
    adf-faces-impl.jar
    jsf-impl.jar
    Try to find exactly the same libs in Jdev and copy&paste from Jdev to SOADEMO folder. then find the libs in SOASuite, and copy&paste from Jdev to SOA Suite those libs. Restart SOA Suite. Deploy Soademo-Client. And hopefully it will work.

  • EDI on XI without using SeeBurger Adapter

    We're about to begin a project to do EDI on XI. We'd like to know about all options we have in addition to just using the recommended SeeBurger EDI adapter. We have a 3rd party middleware tool we could use as well. We'd like to leverage the knowledge we already have in this product. Let me know if this is a feasible architecture.
    - XI handles all the SAP communication.
    - 3rd party middleware vendor tool handles all EDI mappings, and also handles all communication with partners via AS2, FTP, etc.
    - Communication between XI and 3rd party middleware is accomplished thru SOAP/web services or direct HTTP calls.
    Under this architecture, i'm not exactly sure what XI buys us as we could communicate directly to SAP without XI but lets leave it as is for now.
    Is this a feasible option?? Assume the extra development of the maps is not a major consideration since our business requirements would cause us to modify any out of the box mappings SeeBurger would provide anyway.
    Has anyone else implemented EDI via an adapter outside of SeeBurger's??

    hello
    ur architecture seems to be ok becuase as of now i have'nt heard of XI supporting AS2 features..i guess u can configure a partner in XI in configuration builder and then  create a communication channel for the same with the transport protocol as HTTP or SOAP.u can apply security over here by configuring necessary certificates..
    regarding XI usage goes what third party middleware ur using..check whether it offers flexible mapping capabilities like XI (with GUI maps, XSLT or Java maps etc) or BPM capabilities (which u may require in future) and message persistence capabilities etc..
    also now XI is free with NetWeaver 2004s licence.
    Regards
    Rajeev

Maybe you are looking for