EDI Process code for PLANDATATRANSFERCO_POSTACTIO01

Dear all,
does anybody have an idea, how to post an PLANDATATRANSFERCO_POSTACTIO01 idoc?
I can't find a valid process code for this idoc.
I searched for it in table TMSG2, but no valid entry.
How to post such an idoc?
Any suggestions?
Thanks a lot in advance
Harry

We use:
Partn.Type            LS           Logical system
Message type       PORDCR                           Create purchase order
The Bapi BAPI_IDOC_INPUT1 does a select on table TBDBA for the fuction name based on the message type and calls the corresponding function module.

Similar Messages

  • Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

    Hi friends,
    Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
    For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
    Thanks in Advance ....
    If any one is provide exact answer i will give Max marks ..
    Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

    Hi,
    Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
    Rgds
    Sudhanshu

  • Message type ,IDOC TYPE , PROCESS CODE for Edi 990

    Hi ,
    Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
    Thanks in Advance.
    Ajay Kolla

    Hi
    Pls check the below links
    1. http://www.erpgenie.com/sap/sapedi/ansi.htm
    2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
    Hope this may helps you.
    Regards
    Sirigiri

  • Process code for 869(EDI ) Order Status Inquiry Message type.

    Hi Gurus,
                       Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
    Thanks,
    Sudhakar

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

  • Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)

    Hi EDI Gurus,
    I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).

    Hi,
    there is no process code for MessageType LOIPRO .
    check the below link u will get the clear idea.
    Re: Process Code for Outbound Production Order??
    Reward if helpful.
    Regards,
    Nagaraj

  • Process Code for Outbound Production Order??

    Does anybody know the Process Code for Outbound Production Order??
    BASIC Type : LOIPRO01
    Message Type : LOIPRO
    Regards,
    Ravi

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

  • PROCESS CODE  FOR  PURCHASE ORDER

    Hi Friends,
        what is the process code for Purchase order...  because  i need to   creating a  partner profile in WE20 in the inbound side.. if iselect  message type   ORDERS menas.. that related.. process code( for purchase order is not  displaying)..
      can  any of you give me the <b>Message type </b> and that related <b>Process code</b> for <b> purchase order</b>..
    thanks
    Babu

    Hi Babu,
        You will find out the all Process Code from WE41 for Outbound & WE42 for Inbound.
    The Process code for ORDERS: Purchase order is ME10 for Outbound and you can find it out the message type for Inbound from WE42.
    If need more info let me know..
    Cheers
    Veera

  • Process code for invoice

    Hi ,
    I need to know if there is any process code for outbound invoice idoc and inbound invoice idoc . Please let me know I know there is process code INVM for MM - invoice. Is this is the same as normal SD invoice ?
    Thank you

    Pls check this thread on inbound invoic processing...
    Re: Custom segments in INVOIC02
    Check the process codes - SD08 & SD09, for generating outbound invoic idocs.....
    Thanks,
    Renjith

  • Process code for Idoc BANK_CREATE01 and BANK_CHANGE01

    hi,
    I  want to create partner profile  for Idoc BANK_CREATE01 and BANK_CHANGE01 standard Idocs.
    But in transaction we64 , i am not finding the inbound process code  for it.
    So di i have to create a process code for it??
    If yes , how do i create it and also the function module to be created.
    kindly help.
    Regards,
    Loveena

    hi ,
       To create a partner profile <b>Tcode  WE20.</b>
       for your inbound or outbound idocs , just add these idocs in outbound or inbound parameters . For Idoc to File  or File to Idoc , it is sufficient.
    before creating partner profile you have <b>to create port Tcode  WE21</b>
    hope this will help
    regards
    HONEY

  • Process code for IDOC Output from MIRO

    Hi,
    We need to find the Process code for IDOC output to assign Output type in ECC. We need the IDOC output to some other system like PR while doing the invoice Posting (Transaction code MIRO). We tried Using process code SD09 for the IDOC with IDOC Type INVOIC02. In SD09 we are getting error (Update terminated) when we trigger the output while saving in MIRO transaction.
    Further we understand that process code SD09 is used for SD billing and Invoice process.
    We need your help in
    1.      getting the correct process code for the IDOC generation for Invoice posting thru MIRO.
    2.      If we need to configure one process code, let me know the correct function module for the same.  
    Please Note, we need this as Output Idoc from Invoice Posting MM (MIRO).

    Hi Shankar,
    Thanks for quick for reply. We have tested this process code with IDoc type - GSVERF03 and message type - GSVERF. It worked for us for MIRO transaction.
    we are testing with IDoc type INVOIC02.
    once again thanks for sharing the process code.
    Regards,
    Brahma

  • Process code for Function Module IDOC_INPUT_MBGMCR

    hello!!
    here i m tryin to create n inbound idoc
    idoc type - MBGMCR02
    Function Module - IDOC_INPUT_MBGMCR
    but i dont knw the process code for dat can ny 1 help me to find it?
    1st of all how to find da process code if u hav the FM ?
    it wld b more helpful if ny1 cld give me the process code
    thank u
    ashwinee

    hai
    if u dont have process code r cant able to find process code,
    u create process code its very easy. 
      for inbound, go to
       TX-WE42.
      click create give ur process code and give that function module.
      in processing type,
               u check the radiobutton as processing by function module and save it.
    then, u can use this process code in our partner profile .
    any doubt regarding this u can ask me.
    Message was edited by:
            tamilarasan kandasamy

  • How to write processing code for the Inbound IDOC to the R/3 ??

    i m having a file -> XI-->R/3 scenario,
    IDOC is being sent from XI to R/3,
    can u guide to me to write a processing code for the Inbound IDOC to the R/3,
    since i m new to ABAP and ALE technology, can we provide me any blog for doing that.......or guide me....

    Hi Sudeep
    Simple File to Idoc scenarion blog
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    Also see the blog
    <a href="/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi Steps for Posting IDOC's</a> by Ravikumar.
    Configuration of IDOC adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/96/791c42375d5033e10000000a155106/frameset.htm
    Regards
    Santhosh
    *Reward points if useful*

  • Process Code for Message Type LOIPRO(in ALE/IDOCS)

    Hi all,
            I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
    Thanking you in advance,
    anjaly

    Hi
    it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
    There all LOI* idocs are mentioned and then they say:
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
    So, in short, there is no inbound process code for LOIPRO.
    Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
    Regards,
    Joe
    Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • What is the process code for message type FIXEDASSET_CREATE?

    Hi all
    please tell me that what is the process code for
    MESSGAE TYPE = FIXEDASSEt_CREATE,
    FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
    BASIC TYPE = FIXEDASSET_CREATE01 ?
    thanx in advance.......
    Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
    Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

    Hi,
    Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
    Check below Tables as well
    EDE1T
    EDE2T
    EDE5T
    EDE6T
    TEDE5
    TEDE6
    Regards,
    Satish

Maybe you are looking for

  • No "decrypt" choice in contextual menu - need to decrypt an encrypted external hard drive

    I have a Firewire 800 external hard drive that I had previously encrypted using the contextual menu.  I want to change the password on this drive so I'm trying to decrypt it and re-encrypt it while assigned a new password.  I have Filevault 2 enabled

  • HT201089 Family Sharing-ask to buy

    I can not enable ask to buy for my son. It says he is sharing purchases from an account also used by another family member, but it's just the two of us at this point.

  • JTextArea Drag and Drop

    Hello everyone, I am attempting to write a simple application that does drag and drop with JTextAreas. Currently, I am using the default handlers, and have discovered it will only transfer the text displayed. I would like to also transfer the ToolTip

  • Indesign Incopy workflow crash (Writing notes)

    HI Someone knows who uses typography palette or indesign incopy notes? My computer with windows 7 closes when I write notes on my mac but works well. Anyone have this problem? Windows 7+incopy 5.5 id+ic workflow THnks

  • Css Error "Unexpected character :: "

    Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923 Hi, in MySkin.css, i have this error: Unexpected character ::, ecpecting :for example af|inputText::content is displayed as error, why? What is missing here? best regards