Edi receive message, UNA Issue.

Hi All,
I have a scenario where a particular party is sending me an edifact message without the UNA segment.
I understand that the default value which I have given in the EDI disassembler pipeline will be taken into consideration. However they are sending QTY in decimal form'.' (QTY+47:549.300:KGM) whereas default value in
Efact Delimiters will be 0x3A, 0x2B, 0x2C, 0x3F, 0x20, 0x27....where 0X2C represents ','...If I change it to 0X2E which is decimal, it will accept the message and process but what if one more party sends a message without UNA and
send QTY with ',' (QTY+47:549,300:KGM)...
So I do not want to change the property of Efact delimiters , Is there any other option to acheive the same..I tried configuring in the specific party but I understand that BizTalk will only consider the above property.
Kindly help if you have any idea ??
Thanks,
Varun
Thanks, Varun

Is there any other option to acheive the same..I tried configuring in the specific party but I understand that BizTalk will only consider the above property.
I'm afraid we don't have other option to do that, you can also contact Microsoft support directly, perhaps they can help you with this problem.

Similar Messages

I'm having issues with iMessage. It works fine on wifi and I receive messages as iMessage without issue in network or wifi. However as I send a message it starts as iMessage then says not delivered. Then sends as SMS since I have it enabled.

iMessage works on wifi without issue. However I receive messages on network but can't send. I send a message it starts sending as iMessage ten says it can't send. Then starts to send as SMS since it's enabled. I have reset network sertings, updated to ios7, etc and done about 3 othe suggested in order resets to get it to work and it still hasn't started working when I'm not on wifi. Any suggestions?
It's a iPhone 4S. I have two iPhones. One setup to receive iMessage just to its phone number. Therapeutic to receive to its phone and email. I wouldn't think that would be the issue as all 3 are separate. Bone the same going to both phones.
Thanks for the help!!!

Hello there, pacotechguy.
The following Knoweldge Base article provides great in-depth steps for troubleshooting your issue:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Thanks for reaching out to Apple SUpport Communities.
Cheers,
Pedro.

Is anyone else having issues with sending / receiving messages since ios7 upgrade

Is anyone else having issues with sending / receiving messages since ios7 upgrade

I found this link, and am trying it right now to see if it helps.
http://forums.macrumors.com/showthread.php?t=1647944&highlight=ios7+imessage+tro uble

HT4993 I have switched from Iphone to galaxy and I can't receive messages from anyone using an Iphone. I have contacted sprint and they thought they resolved the issue, but I still can't receive messages from iphone user. How can this be resolved

I am having trouble receiving messages from friends that are using Iphone. I recently switched from Iphone to Galaxy Note 3

http://support.apple.com/kb/ts5185
You'll need to contact Apple Support if you no longer have the iphone.

TS2755 I can't receive messages on my iPhone 4?? It will let me send them just not receive, and this happens on text and iMessage. Help anyone?!

I have a iPhone 4 on contract and every now and then it will stop receiving messages when I am in the middle of a conversation. I don't use iMessage as I sometimes go over the limit of my Internet data. So I stick with SMS. And even when I do try with iMessage I still can't receive messages. I don't know if this is a on fault on the phone but it's a really bad downfall if its common on most iPhones. Don't get me wrong but I love this phone I think it's great but it's annoying when I can't receive messages. And at this moment
In time I still can't receive them. Been happening for 12 hours now and it's never been this long usually, advice anyone?

Hi Tnolen15,
If you are having issues sending or receiving messages from a specific contact (in this case, your wife), you may find this portion of the following article helpful (ignore the numbering):
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

I am trying to use Labview and RP1210 compliant hardware to connect to a truck J1939 bus and receive messages.

I am trying to use Labview and RP1210 compliant hardware to connect to a truck J1939 bus and receive messages.
Specifically I am attempting to read data frames using the RP1210_READMESSAGE . am able to configure the hardware and send a message to the J1939 bus. . I think I have not configured something correctly. I can use the RP1210_SENDMESSAGE and see the message I have sent on the bus using CANalyzer When I use the RP1210_READMESSAGE I get the timestamp from a message and the return from the function sends back the correct number of bytes (the number matches the number of bytes I sent out plus four bytes from the timestamp). What I am having trouble with is actually receiving the data. I have had the same type of behavior from two different hardware (Vector CANcase XL and Nexiq USB Link), so I don't think the issue is vendor specific.
Has anyone been able to make the RP1210_RECIEVEMESSAGE function work correctly?
Thanks for any help

Thanks
I have already tried that. The links are the NI RP1210 wraper. The problem I am having is using labview to interface with the RP1210 layer. The RecieveMessage char*fpchAPIMessage this is the output which is a pointer to a cahracter array. In this variable I can receive the timestamp of the message but not the message. The retun showns the correct amount of bytes are aviaable (18 for a 8 byte message) but I can only get the 4 byte timestamp I think I have to dereference this pointer to view the data. I am not sure how to fix this.

Still can't receive messages from Iphone Users

Greetings,
I know there are many topics asking similar questions if it's googled, and I think I have read through almost all of them to no prevail. I know veterans of these boards probably get tired of seeing the same topics, but im desperate and will try to keep it quick. I really appreciate any help.
I recently upgraded from a 4S to a Galaxy S5 and have not been able to receive messages from Iphone users since. I still have my old Iphone. Here are the steps I've tried:
1) Ensure "IMessage" is disabled in my old phone
2) Unregistered my phone number with my Apple ID. I currently have no phone numbers registered with them
3) Changed my Apple ID Password
4) Unregistered my Iphone with my ITunes Account.
5) I also have a Macbook Air and a 2010 model IMac. I have also ensured I am signed out on those devices and my phone number isn't linked in anyway I could find.
6) I called Apple 3 Days ago and the representitive was very nice and professional but ultimately was incorrect. He advised me that the new IoS7 is more advanced and should check about every 12 hours to see if the user on the other end has an active IMessage account. He said to wait 24 hours just to be safe. He also advised people running older IOS systems could take up to 3-4 days to contact me correctly. Furthermore he said if after that time frame their phones still sent me IMessages instead of SMS then THEY were having problems and should call Apple. I just really doubt that is the case.
I have tested it out with 5 Iphones now with help from some friends, all running IOS7 and still no luck 3 days after the phone call to Apple.
7) I tried logging back into IMessage today on my Macbook and it worked, I was still able to send and receive texts from Iphone users. This seems like it should not be possible since it is not linked to my phone number anymore. It is logged into the same Email that I used to have linked to my phone number.
Now as others have said, If I have them hold down the bubble and send as text message 3 times their phone will remember and keep sending my texts, however that is unreasonable to ask everyone to do. There should just be a way to completely delete your Apple ID. Is there anything I'm possibly overlooking? I really appreciate any help.

I am right there with you. This describes my problem to a T. Only other issue I am having is group texts. Iphone users who include me in a group text still send as imessages as well, so even if I text them first and they reply, it send as an imessage. Get it together apple.

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

I continue to receive message that "We could not complete your iTunes Store request. An unknown error occurred (4002). Please try again later." This has been happening every time iTunes Match runs in background. Any suggestions for a cure?

Found a potential solution here:
https://discussions.apple.com/thread/4332757
Gsleeroy
Re: error 4002 in itunes match do you have a solution?
Sep 23, 2012 10:08 AM (in response to matracaelcan)
Hi All,
I had this problem today myself, and was frustrated repeatedly by the '4002' error.
I have literally just fixed the issue by doing the following steps:
1: Go to the 'Store' tab and select 'Turn Off iTunes Match'
2: Return to the 'Store' tab and select 'Update Genius'
3: Wait for this to complete succesfully, the return to the 'Store' tab once more and select 'Turn On iTunes Match'.
4: iTunes Match will now go through the motions and should succeed!
I hope this helps

Receive message when downloading ITunes or Safari for Windows 7 64 Bit. "Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package."

Received message when trying to install Itunes or Safari for Windows. " Installation package could not be opened. Verify package exists or contact application vendor to verify this is a valid Windows Installer package".

I to am having the same issue. I have a admin account and logged into it as well and still have the same message pop up. Contacted live support the woman i spoke with had to send it up higher. We went through every thing including her trying (taking over as a host on my laptop) still have not bee contacted this June will be a year that i have heard nothing from them sine She di everything she could and pushed it up higher.

Can no longer send or receive messages on Mac from non-Apple product users

After installing Yosemite, I was able to send and receive messages to contacts who use Android devices, but that stopped a week ago. Anyone else having this problem?

Hi,
It should appear on the Mac.
If the Messages app is not open it should in fact launch it.
I had this issue once and had to reset the Text Forwarding thing twice before I got the Pop with the Code on the Mac.
Don't dismiss what is on the iPhone until you either have the Code or it is obvious that it is not going to appear. (you need to enter the code number back on the iPhone).
9:22 pm Monday; February 16, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I cannot send or receive messages on iMessages since password reset.

I forgot the password to login to my Mac and had to reset it using my Apple-ID. Prompts then came up asking me to put in my icloud/facetime etc passwords. I had to figure out my old password in order to login to the Apple keychain or something to be able to automatically login to the Wifi and such. I did manage to recover my password and everything seems to work fine now except iMessages though, which I didn't realize until someone sent me an iMessage that I never got and I noticed that I also couldn't send any messages back even though I was connected to the internet. I tried logging out of iMessages and back in, but that only made things worse as I couldn't even log back in and had to change my Apple-ID password to log back in (because putting in my Apple-ID for the iMessages password in the prompt that came up after I put in my Apple-ID password didn't work). Now I am logged back in but still cannot send or receive messages.

I have restarted and now I realize that I am still having the issue with not being able to access the keychain "login", so I get 3 options, to either continue, create a new keychain or update the keychain password. According to some Apple page I found the password for the login keychain should be the old password (which I forgot). Even though I recovered this password, this doesn't work. I also tried my original Mac password, and my Apple-ID password. I don't know what else it could be. Should I just make a new login keychain at this point?

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

"Can not get password" Can't send or receive messages all of a sudden.

Out of the blue my Thunderbird client will no longer send or receive messages.
Here's the error message I get: "Sending of message failed.
An error occurred sending mail: Could not get password for [our server name]. The message was not sent."
The only thing I can come up with that may have caused it would be that I restarted my computer due to a completely unrelated issue (Illustrator kept crashing). Shortly after that, this issue began. I'd really to resolve this without uninstalling thunderbird, I use thunderbird heavily for my job and thus everything is set up, filed, and organized the way I need it.
I've tried restarting thunderbird, restarting my computer (Mac, OSX Yosemite if that matters) and none of these things are working.
Thunderbird has worked flawlessly for the past two years up until now. No updates were installed that I know of. My password is good, I'm able to type it in on our webmail client (atmail) and log in without issue.
Thanks in advance for any help!

Go to Preferences -> Security -> Passwords -> Saved Passwords... and remove the entries for the account. Restart TB. It should ask you for your new password.
If that doesn't fix it, we need to look at your settings.

Mail stops receiving messages and then stops responding

I have been using mail for over a year now with no major issues, until now. When I open mail it appears to open fine, and then it automatically starts taking the accounts online. The progress bar shows that there are 200+ messages to receive, and it shows the data rate at about 100ish kb/sec. Once it hits around 60 "received messages" of the 200+ the data rate consistently starts dropping until goes to 0 kb/sec and I can no longer take any accounts on line or even quit mail. The program responds reasonably well, but when I select "quit mail" the window will disappear, but the program will not quit. The only way I can stop it is to force quit. The accounts I use are pop3 and gmail accounts. I thought that maybe it was one account that was messing me up so I removed the accounts systematically and none of them are working properly. I also have been using wireless, so I connected via ethernet, but the issue persists. Any help is appreciated.

Exact same problem here. I tried moving the index file to the desktop and reopening mail. It rebuilds fine but then this problem starts again. It is only with one account, a pop3 account. Gmail works fine. I've deleted all mail in that account via webmail. It still hangs even though there are 0 mails to receive. The indicator shows it is still trying - and that will go on forever. Quitting just like movie_man describes.
Disabling that account solves the problem - but reenabling it brings it back.
I have the accounts sync'd with iPod touch and another home Mac. It has worked fine for years and then this, suddenly.

TS4268 I'm logged into my apple I'd for FaceTime and messages on my iPad but it still won't let send or receive messages it was working fine at first what can I do to fix it?

Please help I can't send or receive messages on messages or use face time it sometimes work of I turn off my wifi setting and logout of my apple Id

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

Edi receive message, UNA Issue.

Similar Messages

Maybe you are looking for