EDI Seeburger

Hi All,
Can you please provide me the steps for the XSD Conversions for the Standard Mapping Programs?
Also, can you please tell me the configuration steps for all the Seeburger Adapters?
Thanks in advance.

Hi Shweta,
To generate the X2E and E2X mappings by using BIC tool check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00b66651-eeea-2b10-e5a6-8459ec30d948
Splitter configuration:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70808338-c4ea-2b10-dcb4-c628756da4fe
Full B2B Scenario:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
Regards
Ramesh

Similar Messages

EDI seeburger interface

Dear experts,
i have a inbound scenario EDI -> XI -> R3
1. I am thinking of going the BIC mapping way like creating a BIC mappign installing in XI and specifing the mapping name in the module section of the sender file adapter as specified in this blog /people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
2. however when i check in the communication channel and try to select the adapter, i can also see a Seeburger AS2 adapter...
so i am confused ...which option is correct ....
option 1 : to use BIC mapping and mapping name in module section of the sender FILE adpter or
option 2 : to use sender SEEBURGER AS2 adapter..
advance thanks

>
Ravi Mehta wrote:
> Dear experts,
>
> i have a inbound scenario EDI -> XI -> R3
>
> 1. I am thinking of going the BIC mapping way like creating a BIC mappign installing in XI and specifing the mapping name in the module section of the sender file adapter as specified in this blog /people/nithiyanandam.au2/blog/2008/02/20/handling-edi-interfaces-using-seeburger-bic-modules
>
> 2. however when i check in the communication channel and try to select the adapter, i can also see a Seeburger AS2 adapter...
>
> so i am confused ...which option is correct ....
> option 1 : to use BIC mapping and mapping name in module section of the sender FILE adpter or
> option 2 : to use sender SEEBURGER AS2 adapter..
>
> advance thanks
Note that you will use the Seeburger AS2 adapter only if your transport protocol is AS2.
In case you are just accessing files from a FTP then you dont have to go for the AS2 adapter.
The BIC modules can be attached any where.. it has nothing to with the transmission protocol.
So the choice of the adapter is based on how the transmission protocol is needed.

IDOC to EDI Seeburger Mapping Issue

Hi,
I am new to seeburger, Currently I am working on PAYEXT IDOC to EDI scenario using seeburger adapter.
As per my little knowledge i can understand that i need two step mapping:
1) IDOC XML to EDI XML
2) EDI XML to EDI
Now the problem is how can i do 1st mapping if i have to do 1:1 mapping in PI mapper than it will be a tedious task as I dont know which idoc field is mapped to which EDI XML field.
Also i dont know how i can map the 2nd mapping.
when we installed seeburger adapter than i got three files from basis guys related to PAYEXT
msg_PAYEXT_UN_D96A.xml
msg_XML_PAYEXT_UN_D96A.xml
XML_PAYEXT_UN_D96A.xsd
Note: I imported .xsd file in IR, but i dont know what to do with these xml files.
Please experts reply soon as it is delaying my project
Regards,
Shradha

Shradha,
You can check the seeburger software component versions where all the mappings would be provided by Seeburger as part of the package.
You can have a look whether PAYEXT is there and would be useful
To start with
1. You need a functional or EDI Business analyst to guide you on the various mapping specifications needed.
2. You should also liase with your business partners to prepare an business rules and other conditions.
3.Also decide whether you are going to deliver it via AS2 communication or via VAN
4. Accordingly you need to configure the seeburger adapters.
5.The mappings provided to you are from XML to EDI and EDI to XML which is a second stage automatically done by seeburger once you specify the module steps in the comms channel.
I am afraid that without knowing business rules or mapping specifications, you can't work on EDI.
Regards
Krish

Many .sda files required,EDI,Seeburger?

hi,
do we need to create .sda files using Seeburger BIC Mapper for each mapping and deploy each <b>.sda</b> file on to XI server using SDM?

Hi Babu,
Let me tell you the step by step process of SDA creation and deployment.
1) Go to BIC Mapping designer tool
2) Create the maps of needed documents(For example if we know that we will be needed EDI 850, 810,855 etc transactions then we need to add E2X(EDI To XML) and X2E (XML to EDI maps in a project
3) Select that project folder
4)Right click on it
5)Create deployment (SDA) file.
6)Default name of the created SDA file is "Mapping_User.sda"
7)Deploy this .sda in to the J2EE side of XI server using SDM.
Now if you anticipate that you have to add some aditional EDI maps for transtions other then the one covered in the earlier SDA file ::
1) Add the new maps in the old project.
2) Create the new SDA file
3) Again name of the created SDA file is "Mapping_User.sda"
4) deploy this new SDA file.
5) It will over write the existing "Mapping_User.sda" .
Hope i have answered your question
Let me know if you need any further clarifications.
regards
Piyush

EDI Seeburger problem

Hey,
I'm testing an invoice EDI file which contains 3 invoices. I'm putting the edi file in the ftp but nothing happens. When I check the channel it says this:
Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: MESSAGESPLITTER:Adapter call failed. Reason: javax.resource.ResourceException: MessageSplitter failed. MESSAGESPLITTER:No configuration found for the source file 7310XXXXXXXXX|See_E2X_INVOIC_UN_D96A|PARTLY_ACCEPTED|1. Please make sure you have configured <Sender>|<MappingName>|<ACCEPTED> in the module configuration or you have used BIC, split is enabled and corresponding splitting configuration is configured in the splitter frontend
The sender IS already setup in Message splitter. I've tried to modify the edi file and it works if it only contains 1 invoice so my best guess is there's some problem with the edifact syntax, but I cant find what it is. What do you think?

Hi Stefan,
you found the solution? I have the same problem and could not find the error.
Fehler:
com.sap.engine.interfaces.messaging.api.exception.MessagingException:
MESSAGESPLITTER:Adapter call failed. Reason: javax.resource.ResourceException:
MessageSplitter failed. MESSAGESPLITTER:No configuration found for the source
file 40xxxxxxxxxxxxx|Z_E2X_ORDERS_UN_D93A_2_1|ACCEPTED|1. Please
make sure you have configured
<Sender>|<MappingName>|<ACCEPTED> in the module configuration
or you have used BIC, split is enabled and corresponding splitting configuration
is configured in the splitter frontend.
I checked the splitter configuration twice but the same sender with (customized) mapping and also ACCEPTED is configured.
What does the 1 mean after ACCEPTED?
Does anyone have another hint how to check?
UPDATE / SOLVED : I configured the Seeburger Splitter Configuration on the AAE, but because I have only access
to the filesystem of the Central Adapter Engine I set up the used File Adapter to this and he tried to find the
Splitter Configuration in Seeburger of the PI (CAE).
After configuring it in the other workbench he found it without problem.
regards
Chris

EDI Seeburger Message Spliter

Hi,
I am testing a EDI ANSI X12 850 Vxxxx using SEEBURGER adapter in SAP PI. It is a simple file to IDOC scenario. I have configured all the ID objects (includng the Split 997 channel). But when i try to configure the Message Splitter in Seeburger workbench, i am not able to access the service and Channel. The buttons are not active. Do i need to do any other setup before trying to do this ?

Hi,
After entering the party and services need to click on the search button of the services to display the channel names...
and similarly for the other objects...(buttons will get activated after clicking on the search...)
HTH
Rajesh

EDI SEEBurger Adapter

We are evaluating XI for ANSI X12 EDI , Have some EDI Quesitions using SEEBurger Adapter.
1) Does SEEBurger Adpater has ANSI X12 Enveloping and De-Enveloping capabilities ??? If Yes,how this is configured /Developed.
2) Does SEEBurger Adapter has capability of generating sequential ISA control numbers by Trading Partner ??? If Yes,how this is configured /Developed.
3) Can It perform EDI Structure validation based on the EDI standard rules (For eg: Looping structures, Element qualifier restriction list .....)

Hi,
Seeburger is a tool which will conver any type of standard EDI format into XML.
All standard EDi mappings are predefined in seburger,we have to install in XI Server and use that standard mappings.
Check this links
SEEBURGER
http://www.seeburger.com
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward Points if Helpful

EDI - Seeburger: Replace existing VAN FTP connection.

Hi All,
We have running EDI interface in PI using Seeburger adaptor and GXS VAN service provider using FTP channel.
Now one of our Vendors has upgraded to PowerTrack system and hence they can not accept FTP connections.
Instead they are asking us to use SFTP, HTTPS AS2 or webportal upload.
Without disturbing much of our existing setup in PI how can we change the VAN connection? And what is the best suitable way?
I am new to XI so detailed explanation will be much helpful.
Thanks and Regards,
Atul

You'll need to change the adapter you're using in your communication channel. For SFTP and AS2 you'll need a new adapter (like aedaptive for SFTP and AS2 or seeburger for just AS2). HTTPS is supported default by PI.

EDI using seeburger

Hi Friends,
Recently I have worked on EDI scenarios using Seeburger adapter.
there are so many in and outs for EDI / Seeburger ,
out of that I need some inputs on finalization of error handling framework for EDI implementation using Seeburger.
Please give your thoughts on error handling in EDI /Seeburger.

Beside my two cents above, your question can't really be answered without defining some business rules around it. So for the sake of discussion i am going to make up a scenario. And the cycle upto Despatch advice.
So business rules are:
1) Over supply not do able. Which implicitly means no manual changes in the incoming ORDER.
2) Under supply allowed as in the real world this will always happen as at the time of ORDER, the supplier side could be out of stock on a particular item ordered.
Message Cycle:
1) Order (Inbound)
2) Order confirmation (Outbound)
3) Dispatch advice (outbound) - DESADV
So briefly speaking based on how the Order confirmation is setup (based on business guidelines) will determine what we are suppose to handle.
If order confirmation is allowed to change the Order i.e. If no stock available and hence line item rejected it would update the original Order in the sending partners system hence no issues at the time of desadv (this is situation one). However if due to some human error more stock shipped than agreed upon in the DESADV then 'excess stock' process can be invoked and based on business rule it can be returned e.g.. This wouldn't require any message amendment. However if short delivered then what was agreed in DESADV partner can always request amends and new DESADV (corrected) can be issued.
I will stop here; I am hoping that i am making sense above? Will continue if i am making sense and then we can talk about technical side for addressing different situations.
regards,

Seeburger

Hi,
I have the following questions on EDI Seeburger.
1.BIC Mapping Designer:As per my understanding,the BIC Mapping Designer is used if any existing Generator mapping provided by Seeburger is not as per the requirement.If we need to edit the existing Generator Mapping then we use BIC Mapping Desinger,right?But if we need edit the existing Generator Mapping,do we see both source and target structure,right?But if we are suppoded to create the mapping from scratch then where to get both the structures from?
2.I searched a lot about the configuration details of the Seeburger adapters like AS2 and SFTP but could not find anything good,can you please provide me the same?Also,where and how to use AS2 and SFTP?What is VAN?Is it an alternative to AS2 or SFTP?
3.What are certificates in Seeburger?Which adapters are they relevant to?
Thanks,
Gayatri

Hi,
>>I searched a lot about the configuration details of the Seeburger adapters like AS2 and SFTP but could not find anything good,can you please provide me the same
When you purchase the third party adapter from seeburger you'll get configuration guide which will giv you the clear idea of cofiguring.
>>where and how to use AS2 and SFTP?What is VAN?Is it an alternative to AS2 or SFTP
The AS2 protocol is internally based on HTTP.AS2 uses two different message types: the actual payload message and the Message Disposition Notification (MDN). The payload message encapsulates an EDI file so that it can be transmitted via HTTP. The purpose of the MDN is to acknowledge the receipt of a payload message.
http://www.edibasics.co.uk/
>>What are certificates in Seeburger
certificate information required for encryption and signing
Refer these links it may help you
Re: Seeburger BIC Mapping Designer: Special Character (German Umlaut) Problem
SEEBURGER integration using PI: BIS, BIC, AS2 Adapter, FTP ?
Handling EDI interfaces using Seeburger BIC modules
http://wiki.sdn.sap.com/wiki/display/XI/SeeburgerSuiteforSAPPI
Regards,
Priyanka
Edited by: priyanka.anagani on Dec 26, 2011 7:22 PM

EDI Processing

Hi All,
I have some questions about EDI processing in XI.
If we use seeburger adapter, do we need to write custom mapping program (eg: 850 to ORDERS) or adapter itself generate the mapping?
How do we split the message is it Interchange level or Transaction level? How seeburger is going to handle this?
Can anyone please forward me the related documents if you have about seeburger adapter?
Please explain me one complete scenario EDI 2 IDOC using Seeburger adapter.
What are the other alternatives to seeburger adapter?

Hi,
Please see the below links , so that you can get clear idea about EDI/seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Please let me know your prob is clear or not..
Regards
Chilla..

SeeBurger Implementation

Hi All,
Can any body provide me with the details on how to configure Seeburger adapters? There is a requirement which I need to work on. I have the PI server but I dont have access to SeeBurger as of now.
I am new to SeeBurger but well versed with the concepts.
Can anyone provide me the step by step implementation of the EDI SeeBurger Adapter to process I/B and O/B EDI files.
Thanks
Tushar

Hi ,
BIC Mapping designer comes with the bundle of Seeburger Package, so with the package instally separately the BIC mapping designer tool and in that we have some standard set of converting i.e mapping programs. so if you go and search in help of that it provides the information of how to create a .SDA files and once you create that deploy that using basis people in to the PI server.
For the module configuration that to be used in the File adapters are as follows:
If it is to pick the sender EDI file then the following should be used in the Module Tab of the Sender File Adapter:
PROCESSING SEQUENCE
Number, ModuleName, Module Type, Module Key
1,localejbs/CallBicXIRaBean,Local Enterprise Bean,bic
2,CallSapAdapter,Local Enterprise Bean, 0
MODULE CONFIGURATION
Module Key, Parameter Name, Parameter Value
bic,desDelimeter,,~ (Here ~ is the separator)
bic,destSourceMsg,MainDocument
bic,destTargetMsg,MainDocument
bic,dynamicConfiguration,true
bic,mappingName,See_X2E_ANSIX12_810_V4010 (This is the 810 EDI mapping name which this should be deployed as .SDA in PI server)
bic,newLine,true
regards,
Kishore

EDI Scenario - Samples

All,
Can you please provide some sample scenarios with EDI using Seeburger.
I was unable to find good document with EDI Scenaios.

Hi,
EDI Seeburger Adapter
http://www.hibcc.org/EBUS/editemplates.htm
SAP XI supports EDIFACT
How to get started using Conversion Agent from Itemfield
More on the SAP Conversion Agent by Itemfield
Manipulating Idoc Control Records from Payload
The specified item was not found.
Check this blog also
Creating Sales Order through Idoc
With Seeburger we can conver to edi format to XML
seeburger doc
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Sarvesh

Regarding SEEBURGER

Hi ALL,
Could you plz tell me ,
In IDOC to EDI SEEBURGER Scenario, We have to purchage the SEEBURGEREDI Adapter Software ?
Where to install the SEEBURGER Software ? In XI System or Non-SAP System ?
Any Configuration required in Non-SAp System ?
Thanks & Regards
Murali

Hi,
The most direct way of using the Seeburger adapters is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to do the following:
1. define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. create a one to one mapping between input en output.
4. export the metadata in xsd or sda format for import in XI
5. generate an SDA which can be deployed in XI and used as a module.
Please go through the following links which clearly explains what you want and it also helps you in understanding the same in depth:
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
Thoughts on EDI in an SAP XI Environment
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/135b0b94-0701-0010-f6a9-86a14057544a
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
The below links will answer your all questions
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Thanks
Swarup

Use of see burger adapter replacing with File (FTP) adapter

Hi All,
My current scenario is file to proxy and want to replace file adapter with the see burger adapter.
Can any one expalin step by step procedure(after installation of see burger adapter in SDM) using sender see burger adapter with the port details?
For this do we need to write any adapter modules in integration directory?
Also pls give me clarification on 850 and 997 messages?
Regards,
Nani.

Hi,
Deploy the standard seeburger mapping provided by see burger on XI .Then you need to call that mapping in the adapter module which does the conversion from EDI to XML and XML to EDI. You need to call the BIC module in the communication channel configuration and configure the module parameters like
bic- destSourceMsg = MainDocument
bic- destTargetMsg = MainDocument
bic- mappingName-something like ....See_E2X_ANSIX12_850_V4010
Once if you are able to convert the edifile to xml, then the remaining proxy configuration will be same as just for normal scenarios.
>>For this do we need to write any adapter modules in integration directory
You can use the standard BIC module or you can very well write your own adapter module to convert EDI to xml and configure it in the communication channel.
>>>Also pls give me clarification on 850 and 997 messages
850 is purchaseorder EDI document and 997 is the functional acknowledgement
The links provided by Luis will really help you in understanding the basics. Also go through the below links
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b17369-9522-2c10-84a6-d75d8a8ace22
Regarding EDI
Seeburger BIC Help!!
Regards,
Priyanka

EDI Seeburger

Similar Messages

Maybe you are looking for