EDI Sender/Receiver Id

Hi all,
My scenario is INVOIC IDoc to EDI 810 using Seeburger EDI adapter. SAP Bill-to customer# is 1000001 and I want to map customer Receiver Qual/Id 12/7187671234 to ISA07/ISA08 and Sender Qual/Id 12/5182396901 to ISA05/ISA06.
Like this every Bill-to customer has its own Receiver/Sender Id's. Where can I maintain all these Information. Is it possible in value mapping.
Thanks in advance.
Arjun

Sender ID and Receiver ID ......are unique IDs ..... identifying Business partners...
They dont change as such......since many business documents have those nos....
bt in a very very rare case thr is a req to change ..then you have to manually go and edit that value mapping...
*Reward Points if helpful*
*if the issue is solved...Mark the thread as answered ....*
Regards,
Sushil.

Similar Messages

Sender / Receiver ID mapping for EDI interfaces and Type of seeburger adapt

We need to set up a interface using Seeburger adapter for Purchase order IDOC to 850 EDI mapping.. After reading from SDN,
1) We can use the standard mapping in BIC MD to do E2X and X2E mapping..
2) We can use any of the AS2, EDI generic adapter, Seeburger FTP adapter or Seeburger SFTP adapter...
How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security...
Also how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID
Also the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping.

Hi Kris,
I had worked in the somehow same scenario, It was IDOC to EDIFACT file.
I can give you few clues which might be helpful
In BIC MD you have to create your own mapping if the standard mapping is not available (First check all the standard mappings in BIC). For your reference you need X2E mapping, as your scenario is IDOC to 850 EDI.
"the graphical mapping to convert IDOC XML to EDI XML, Do we have standard mapping defined or do we need to create our own graphical mapping."
In graphical mapping i created my own mapping, Seeburger has given some sample mappings you can check those for your reference (SEEBURGER_GENERIC_EDI software component). Mostly you have to create your own. You need a document from your functional consultant so that you are able to map correct fields and constants.
"how do we map Sender and Receiver IDs on the EDI message.. Should this be hardcoded as part of mapping or is there any facility in seeburger adapter to do this? I saw some references to Party Identifiers and not sure how it is used in setting up Sender/ Receiver ID"
This has been generally hardcoded in message mapping (In my case i hardcoded). If any of ur IDOC field contains that data you can map that field. But better Idea is ask your functional expert.
"How do we decide which adapters should be chosen? I can see that it makes sense to use SFTP adapter or AS2 adapter for security... "
You can choose adapter according to your requirement. In my case i used File adapter as i have to create file in PI server only. My suggestion you can use SFTP for seeburger
Hope these points are helpfu for u
Regards,
Shradha

EDI: Sender port in control record is invalid

HI
EDI: Sender port in control record is invalid, this message i am getting in WE02 what is this pls tell me ASAP
regards
shekar

Hi,
Check the ALE setting...
STEP 1:ALE SETTINGS TO POST IDOC OUT OF SAP R/3
We need to do the following settings in XI
1) Create an RFC Destination to the Sending System in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both should be succesful
2) Create Port Using Transaction Code IDX1
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client
d) Enter the RFC Destination created in SAP R/3 towards other system
e) Save
3) Load Meta Data for IDOC Using transaction Using Transaction (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1
SETTINGS IN SAP R/3
We need to do the following settings in R/3
Logon to Sap R/3 System
1) Create an RFC Destination to XI in transaction code (SM59)
a) Choose create
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#
e) Enter the Gateway host as same details above SID/URL
f) Gateway service is 3300+system number#
g) In the Logon /Security tab, enter the client user & Password details of Destination system
h) Test the connection and remote logon.Both must be succesful
2) Create communication Port for Idoc processing Using Transaction(We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile with Outbound Parameters (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang
Then Save
e) Select Partner no. and LS which were create above
f) Now we have to give some Outbound Parameters.So click on ADD TO Create Outbound Parameter
g) Select Message type
h) Double click on Message Type and Then Enter the details for Receiving port, Pack size=1 and Basic type
I) save
4) In Transaction SALE, Create Logical System
a). Go to Basic Settings-> First Define logical systems
and then assign logical systems
b) Double click on Define the logical systems
c) Give data for your Logicaal System and Name
d) Now click on Save.Here one window may appear just click on Continue.Now the Logical System name is ready
e) Assign the logical system name to the client
5) Create Customer Distribution model in the transaction code BD64
1) Click on the Create modal View button and enter the short text, Technical name etc as shown below
2) Now select the created model view and click on Add message type button .A pop up box appears, enter Sending system, receiving system and message type
3) Save the Distribution model
Generate Partner Profiles
Click on Menu Item Generate Partner Profiles
It leads to the next transaction where in the selection screen you have to provide Model view name, Partner System logical system and execute
Then, you will be intimated about the partners, port creation, and outbound parameters creation
4) Distribute Customer Distribution Model
In the menu item GO to Edit->Modal View-> Distribute to the destination client
Popup window appears ,press Enter
You will be intimated about the the Modal View Distributed
Regards,
Phani

I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Can't group text or send/receive picture messages! Please Help!

Hell Everyone,
so I just recently switched from my Iphone back to my blackberry for simplicity/practical reasons...I couldn't deal with the iphone anymore. In doing so, I came across a problem. I am not able to send group texts or send/receive mms. Everytime I try to do so, the text has a red 'X' next to it showing that it didn't go through. I am currently with ATT and have tried calling them to resolve it but no one knows.
here are some of the steps I took to resolve it
1. Resetted to Factory Settings - Did not work
2. Made sure all the settings in my text message options is selected properly - Did not work
3. Deactivated iCloud/iMessage on my previous iPhone - Did not work
4. Called ATT and had them make sure BB Data plan was on my plan, and it was - Did not work
Can someone please help?
Thank you,
Pogos

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should re-contact your mobile service provider for formal support...be sure to request their dedicated BB support group. MMS is a specific service level that must be properly enabled on BBs in order to function. Often, the first support group you reach will not understand the proper method for configuring this on BB...but their dedicated BB support group will.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help with iPad Identifying Phone Numbers in iMessage Send & Receive Settings / iMessage Syncing Help - iOS 6 - iPhone - iPad

With iOS6, iPhone and iPad users will see that their Send & Receive iMessage settings have updated across their devices to be made available at both phone numbers and email addresses. You may have also seen alerts on one or more of your devices advising that another device is now using the same Apple ID/phone number for iMessage.
Being able to be reached on iMessage on both Apple ID and phone numbers across devices means that iMessage can keep the same thread and sync across devices.
Due to having 2 iPhones on different phone numbers running along side my iPad at one time, (whilst I was waiting for my phone number to be moved to a new provider), my iMessage settings on my iPad lost my phone number completely. I thought I would document the steps to recover this for anyone in the same boat.
1. Check that you are signed in with the same iCloud Account on both iPad and iPhone.
2. Turn off iMessage on your iPad from Settings > Messages.
3. On your iPhone, go to Settings > Messages > Send & Receive. You should see your phone number and your iCloud email address in the 'Your can be reached by iMessage at:' list. Make sure both are ticked.
4. At this point, I synced my iPhone with iTunes, then synced my iPad with iTunes.
5. On your iPad, turn iMessage back on - your phone number should now show in the 'You can be reached by iMessage at:' list. Tick the phone number. You should receive an alert on your iPhone.
This should resolve the issue.
With the above set up and with the iOS 6 updates, iMessage should now sync fine across devices however I have still found the most successful way to run iMessage is to always start new conversations from your Apple ID and to start new threads by addressing the first message to an Apple ID from an Apple ID.
To do this, go to Settings > iMessage > Send & Receive and tick your Apple ID in the 'Start new conversations from:' list, then start a new iMessage thread to the recipients Apple ID. This way, the thread will sync across iPad and iPhone. Note that a thread set up this way will not fall back on SMS, so you get a clean iMessage thread. This method also worked/works on iOS 5, as long as you send the first message of a new thread from an iPad (which can only send via Apple ID) to an Apple ID.
Hopefully this helped someone!

ipad has no phone number, you use a same email address for both devices. and set it in Settings>Messages>Send & Receive

Haven't been able to send/receive iMessages since upgrading from 4s to 6 plus

I bought iphone 6 plus 64G to upgrade from my iPhone 4S. I have not been able to send or receive iMessages to iPhone users in my contacts with my cell number. It always uses my email when I create a new iMessage and is able to send that way. I cannot receive iMessages from iPhones to my cell number. which is a huge problem. I have tried turning iMessages on and off and resetting my network and nothing seems to be working. How can I resolve the problem?

If you turn iMessage off and on, does it activate? If not, then see this troubleshooting support document. If you have difficulty activating FaceTime or iMessage - Apple Support
If it does activate, the go to Send & Receive and see if your phone number is listed there. It should be grayed out and checked.

While send/receive email, I have received an error message "Sending of password d"? However with same login details, I am able to login with other application.

While send/receive email, I have received an error message "Sending of password d"?
However with same login details, I am able to login with other application.
I have changed password still the issue remains as it is.

https://support.mozilla.org/en-US/kb/cannot-send-messages

Thunderbird config to send/receive email

I tried configuring Thunderbird to send/receive email from my new verizon fios account. Simple Pop3 - how hard can it be? Well, using the settings provided, I am unable to send or receive email. I called and talked to tech support and they said they don't support Thunderbird, but I could talk to 'premium' support since they have no support boundaries. Well, I don't think I should have to pay to get my email setup to a POP3 client.
Here's my current config:
Mozilla Thunderbird 2.0.0.23
Account:
Server Type: POP Mail Server
Server Name: incoming.yahoo.verizon.net
Port 110
User Name: myname
Security Settings: Use Secure Connection: never
Use secure authentication - not checked
SMTP Server
Server Name: outgoing.yahoo.verizon.net
Port: 25
User secure connection: no
When trying to send an email I get:
Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.yahoo.verizon.net failed. The server may be unavailable or is refusing SMTP connections. Please verify...
When I try to get mail I get:
Sending of password did not succeed. Mail server incoming.yahoo.verizon.net responded: Error logging in. Please visit http://mail.yahoo.com
Any help would be appreciated.

winsomesmile wrote:
That was the one thing the tech told me on the phone - to use verizon.yahoo.net for incoming and outgoing instead of verizon.net
Other than that, I'm not sure where else to check that that is correct.
If the agent told you to use the Yahoo servers, they were probably right. If you want to verify, you can log into your account at www.verizon.net and it should say that you have a Verizon with Yahoo account.
As for the settings:
1. Make sure the username and password that you have are the correct ones. Logging in to verizon.net will verify this.
2. Check your incoming server settings. They should look something like the following image. (Of course, where the example just says "username" your username should be filled in.)
3. Check your outgoing server settings. They should look something like the following image. (Of course, where the example just says "username" your username should be filled in.)
4. Make sure that the password you are entering is correct. I suggest typing it out in a notepad then using copy and paste to verify that it is correct, since it will appear as asterisks in Thunderbird. Once you have successfully sent and received a test message, you might consider checking the box for remembering your password, although this is less secure than typing it in every time.
Hope this helps! If you have any other questions, just let us know.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Imessages not sending/ receiving. All texts made to other iphone users produce an error message where it shows as it was unable to deliver, however, the messages go through, but error still comes up after each imessage sent. this does this for each text

I have the Iphone 5S. Over the last few days, I continually get mail delivery errors when imessages are sent to any contacts who have iphones. I have spoken to my friends/ family who are also on the receiving/ sending end of my messages. They also say that they are receiving an error/ mail delivery error when they send imessages to my phone. Text messages are working fine (with other phones that are not iphones) and no delivery errors come up. However, it is just with me sending or receiving imessages. I have gone in to settings> messages> send & receive and all my information is right. I have also attempted to cut the phone off and back on (hard reset as well) and this has not fixed the problem. I then explored to see if my software was out of date, however, i have the most up to date software for the iphone 5 S. Does anyone know of a way to fix this problem, as it is annoying to both me and anyone else who has an iphone that sends me a text/ imessage as it will *alert* that there was a delivery failure.
Please help!!

There could be a problem with iMessage, although usually when there is an outage these boards are flooded with problems. It could be a very isolated issue, and if just started all of a sudden, it might be something at Apple.
Although it is annoying, I would just wait it out a few days and see if it goes away on its own.

I have BIS but can't surf, send/receive email, use apps

i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi. also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc. They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them. aren't these supposed to be running through BIS only?
I have GPRS on top, not gprs. my carrier says i have active data plan/BIS. but under Services Status..it says Blackberry Internet Service: Connection: not connected...
so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS. i have registered my HRTs several times... and resending my service books... same thing...
the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
my sister and i have the same BB... i removed my sim and inserted it to her BB and the BIS worked fine... i was able to surf and use apps.. but when i put my sim back on my phone, the problem still exists. i even used a different sim card that is also subscribed to BIS/data plan, and it still has the same problem... my guess is my carrier is right that my data plan is working ok and that my handheld itself has the problem...
i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... numerous battery pulls... same thing... i can receive the HRTs and service books, but after that can't do anything else like i used to... (send/receive emails, use apps like facebook, twitter, ym, etc., can't surf with internet browser - except when wifi is on everything else work fine even emails and apps)..
i would really appreciate your help guys.. thanks!

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

I have BIS but can't send/receive email, surf with internet browser

i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi. also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc. They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them. aren't these supposed to be running through BIS only?
I have GPRS on top, not gprs.
so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.
i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS. i have registered my HRTs several times... and resending my service books... same thing...
-My carrier has not reported any data outage.
- I'm in an area where I've had RIM data services (for months now). It has always been working well. I've never really had any problems with my BIS until 4 days ago when it just suddenly stopped sending/receiving emails, surfing through internet browser, using facebook, twitter, ym apps, etc..
-the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
-i've read somewhere that it may be some application error or something, so I've wiped out my BB thrice now, deleted all third party apps, everything is clean i guess, but still I end up with the same problem.
-i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... same thing...
can you help me out with this? i have tried battery pull, wipe out and OS reinstallation lots of times but same problem happens...

Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Slow email send/receive for user associated with beehiveonline

It takes hours to send/receive an email to/from the user associated with my beehiveonline workspace. Also, the number of emails that we receive has decreased, it may be not related at all, but there is no way for me to check if that's just due to low customer activity or to timeouts.

Hi,
If you have issues then let us know the date/time of the issue and the degree of delay you are seeeing and we can check if there may be a reason for the delay.
Phil

Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts. I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

Hi Milrclan,
Thanks for contributing to the Apple Support Communities.
If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Best Regards,
Jeremy

If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

If two iPhones are linked to the same Apple ID can the other phone see the iMessages I'm sending, received or both?

Yes, if both devices is using the same apple id for imessage.

EDI Sender/Receiver Id

Similar Messages

Maybe you are looking for