EDI: Syntax error in IDoc (mandatory segment missing)
HI all,
Error Message - EDI: Syntax error in IDoc (mandatory segment missing)
Status ID - E0
Message No - 072
Status of the IDoc - 26
Please help me how to solve this issue?
Thanks,
Srini
Hi,
This error normally comes up when the sequence of segments has been disturbed.
For successfully posting an IDOC you need to maintain the sequence of the segments as in WE30.
You can also check which segments are mandatory in WE30 by clicking on the segment name and the pop up that comes.
Thanks,
Manish
Similar Messages
-
Hi all,
I have extended the the standard IDOC MATMAS05 classification view with structure as below-
E1MARAM Master material general data (MARA)--->Mandatory segment
Z1KLART KLART --->Extended chaild to E1MARAM
Z1CLASS segment for class --->Extended chaild to Z1KLART
Z1CHARACTERISTIC CHARACTERISTIC --->Extended chaild to Z1KLART
E1MARA1 Additional Fields for E1MARAM
E1MAKTM Master material short texts (MAKT) --->Mandatory segment(Child to
E1MARAM )
I am getting an error in IDOC fro material master as:EDI: Syntax error in IDoc (mandatory segment missing ).
Diagnosys By system is :*The segment E1MAKTM has the attribute 'Mandatory' in the syntax description of the basic type MATMAS05 (customer enhancement ZMATMAS05). However, the segment is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment is missing.
This error may have been triggered by an unidentifiable segment before the expected mandatory segment.*
Please help to resolve the issue.
Thank you.
Edited by: sanu debu on Apr 30, 2009 11:25 AM
Edited by: sanu debu on Apr 30, 2009 11:31 AMHi,
You cannot add an segment in the middle of other segments.
YOu have to add any segment at the last.
If you want to add a segment as the child of another segment, it should be added after the last child of the parent segment.
In you case, you have to add your segment after the E1CUCFG segment.(NOt under that segement)
Regards,
Ravi Kanth Talagana -
EDI: Syntax error in IDoc (mandatory group missing)
Hi Idoc Experts !
The error pasted in subject is what i'm getting when i'm calling function module MASTER_IDOC_DISTRIBUTE.
THE IDOC IS GETTING GENERATED BUT HAS SYNTAX ERRORS WITH STATUS/ERROR CODE :26.
I'm tryin to generate an IDOC with following details:
Direction 1 Outbox
Current status 26
Basic type WMMBID02
Extension
Message type WMMBXY
Partner no. XEROX
Partn.Type LS
Port 170_INVRPT
Can anyone be of some help?
Points guaranteed for authentic answers !
Thanks,
Sachin SoniHi,
While passing the idoc data, you are not passing the mandatory segment and passing the child segment. Try to add the data for the mandatory segment.
Check and find the mandatory segments on the IDoc through WE30 .And check if all this segments are populated in the IDoc which failed ( WE02).
Regards,
Soumya. -
EDI: Syntax error in IDoc (mandatory group/segment missing)
hi EDI/IDoc experts,
Need you help urgently. According to the requirement, i need populate a segement E1IDT01 of basic type PEXR2002 . I added the code , then run and generate an idoc , the new segment
E1IDT01 was populated, but Syntax error 26 happend. Error message as below. It also strange that i can see E1IDKU5 populate out as usual, but some others segment disappeared , i am sure that in my code ,i didn't changed any variable related to other segement . how can i fix this problem?
EDI: Syntax error in IDoc (mandatory group missing)
Message no. E0079
Diagnosis
The segment group E1IDKU5 has the attribute 'Mandatory' in the syntax description of the basic type PEXR2002 (customer enhancement ). However, the segment group is missing in the IDoc. The segment number logged in the status record identifies the item before which the segment group is missing.
Procedure
Please check the IDoc or the syntax description of the basic type PEXR2002 (customer enhancement ).Hi all,
Thanks so much for your concern!
Finally ,this problem has been figured out .
Requirement is user want to use segment E1IDT01 in idoc to populate the long text they maintained in accounting document vendor item line (use FB01 to create accounting doc).
Why I made out " EDI: Syntax error in IDoc (mandatory group/segment missing)" this message out ,because I didn't fill data correctly. I missed to keep SY-TABIX in momory .
when we use Function module ,or do..enddo...or read table it_table. we should be careful that SY-TABIX is changed .So we can't just use MODIFY EDIDD_TABLE INDEX SY-TABIX in the last . we should define a local variable to keep SY-TABIX in memory and then use it to modify EDIDD_TABLE.
Follow is the final code.
IF SEGMENT_NAME = 'E1IDT01'.
TABLES :STXL.
* Define for long text getting
DATA: LIT_TLINE LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA: LV_STRING(2000) TYPE C.
DATA: LV_TDNAME TYPE THEAD-TDNAME,
LV_ID TYPE THEAD-TDID VALUE '0001',
LV_LANG TYPE THEAD-TDSPRAS VALUE 'E' ,
LV_OBJ TYPE THEAD-TDOBJECT VALUE 'DOC_ITEM'.
data: LV_LINE TYPE I, " long Text lines
LV_LEN TYPE I, " long Text length
LV_TABIX LIKE SY-TABIX.
* Clear memory
CLEAR:LV_TDNAME,
LV_STRING,
LV_LINE,
LIT_TLINE, LIT_TLINE[],
LV_LEN,
LV_TABIX.
* Keep sy-tabix memory using a variable--This is the key point
LV_TABIX = SY-TABIX.
* Combine TDNAME with company code + accounting doc + fiscal year + item number.
CONCATENATE REGUP_DATA-BUKRS REGUP_DATA-BELNR
REGUP_DATA-GJAHR REGUP_DATA-BUZEI INTO LV_TDNAME.
* When vendor item has long text , read long text into lv_string
SELECT SINGLE *
FROM STXL
WHERE TDOBJECT = LV_OBJ
AND TDNAME = LV_TDNAME
AND TDID = LV_ID
AND TDSPRAS = 'E'.
IF SY-SUBRC = 0.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
ID = LV_ID
LANGUAGE = LV_LANG
NAME = LV_TDNAME
OBJECT = LV_OBJ
TABLES
LINES = LIT_TLINE.
IF NOT LIT_TLINE[] IS INITIAL.
DESCRIBE TABLE LIT_TLINE LINES LV_LINE.
DO LV_LINE TIMES.
READ TABLE LIT_TLINE INDEX SY-INDEX.
CONCATENATE LV_STRING LIT_TLINE-TDLINE INTO LV_STRING.
ENDDO.
LV_LEN = STRLEN( LV_STRING ).
* Make sure we only need less than 840 charicters
IF LV_LEN > 840.
LV_STRING = LV_STRING+0(840).
LV_LEN = 840.
ENDIF.
* Populate Vendor item long text with segment E1IDT01 start from
* Fields TXT03 to TXT14.
EDIDD_TABLE-SDATA+147(LV_LEN) = LV_STRING.
MODIFY EDIDD_TABLE INDEX LV_TABIX.
ENDIF.
ENDIF.
ENDIF. -
Idoc Error - EDI: Syntax error in IDoc (segment cannot be identified)
Hi All,
have created a new reduced message type for our new vendor A/C group through BD53. Also done reqd config for sending the vendor master through this message type. .
I have created couple of vendors for testing with X01 with withholding tax functionality and when try to send these vendors , Idocs are getting failed .
When I create vendor without withholding tax functionality , idoc is getting posted succesfully . If create vendor with entries in the feild whih are related to withholding tax . Idocs are getting failed .
If I see the status in WE05 ,Idocs which are posted succefully are showing the basic type as CREMAS03 . For idocs which are getting failed have the basic type as CREMAS04 and also the extension as Z1CREMAS . I don`t understand why the system is defaulting CREMA04 & Z1CREMAS when I send the vendor master with withholding tax feild entries.
I am not much familiar with ALE /Idoc set up. Please can any body help me to resolve the issue.
The error message in we05 as below
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment Z1LFA1M does not occur at the current level of the basic type CREMAS04 (extension Z1CREMAS).
This error can have several reasons:
The segment Z1LFA1M is assigned to a group whose header segment does not occur.
The segment Z1LFA1M does not exist in the syntax description of the basic type CREMAS04 (extension Z1CREMAS).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type CREMAS04 (extension Z1CREMAS).
ThanksHi,
I don`t understand what do you mean release after adding segment.
Message type works i.e. Idoc get posted if I send with the vendor w/o withholding tax field entries. Idoc fails when send vendor with withholding tax field entry.
Regards -
Hi All,
I have created IDOC extension for IDOC Basic type "PROACT01" and have followed all required necessary steps but getting IDOC
Status 26. EDI: Syntax error in IDoc (segment cannot be identified). The exact error is:
Please check Error Details and the details of the steps I followed for Setting up IDOC Extension:
Error Detail :
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment ZPROSEG does not occur at the current level of the basic type PROACT01 (extension PROACTEX).
This error can have several reasons:
The segment ZPROSEG is assigned to a group whose header segment does not occur.
The segment ZPROSEG does not exist in the syntax description of the basic type PROACT01 (extension PROACTEX).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type PROACT01 (extension PROACTEX).
Can you please look at this problem and suggest what is wrong with IDOC Extension/Custome Segment?
Below is the Details of the Steps which I have followed:
1. Tcode WE31 - Created new custom Segment ZPROSEG with 4 fields. Released segment.
2. TCode WE30 - Created IDOC Extension PROACTEX for Basic Type PROACT01. Released IDOC extension.
Here when I run syntax check warning appears "No predecessors exist". I am not sure if its okay!!
3. TCode WE82 - Added Extension PROACTEX in the Message Type PROACT with BASIC Type PROACT01.
4. TCode WE20 - Added IDOC Extension PROACTEX in the predefined partner profile in WE20 transaction.
5. Added the following code in the Customer Exit EXIT_SAPLWVMI_001 include ZXWVMIU01 .
DATA segnam(27).
READ TABLE dedidd WITH KEY segnam = 'ZPROSEG'.
IF sy-subrc NE 0.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
APPEND dedidd.
ENDLOOP.
ENDIF.
Finally ran transaction WVM2 (Transfer of Stock & Sales Data) to generate IDOC, its creating IDOC but when checked IDOC in WE05 its getting Status Error "26".
Looking forward for your reply.
Many thanks in advance.Hello,
Actually you are appending the Z segment instead of inserting into the correct position. So the segment is added at the last, so hierarchy of segments is collapsed.
So get the index of the previous segment E1EDP31 and increase the index by 1 and INSERT the Z segment with that new index as below.
LOOP AT dedidd WHERE segnam = 'E1EDP31'.
lv_index = sy-tabix. " <<--
ADD 1 TO lv_index. " <<--
CLEAR dedidd.
dedidd-segnam = 'ZPROSEG'.
zproseg-matnr = 'Mat1'.
zproseg-lgort = '001'.
zproseg-gernr = 'SNo1'.
zproseg-labst = 2.
dedidd-sdata = zproseg.
*APPEND dedidd.
INSERT dedidd INDEX lv_index. " <<---
ENDLOOP.
Here actually we are insering the record inside the LOOP and it regenerates the index again. It is not actually a good practice.
So the best practice is get the index and generate the segment inside the loop, store them into another internal table, come out the loop and insert the Z segments into DEDIDD by looping the new internal table. -
EDI: Syntax error in IDoc (segment cannot be identified)
Hi All,
Im facing the below error EDI: Syntax error in IDoc (segment cannot be identified).
And this error is coming only for few idocs rest are getting processed successfully.
Message no. E0078
Diagnosis
The segment E1EDP03 does not occur at the current level of the basic type ORDERS05 (extension ).
This error can have several reasons:
The segment E1EDP03 is assigned to a group whose header segment does not occur.
The segment E1EDP03 does not exist in the syntax description of the basic type ORDERS05 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type ORDERS05 (extension ).
Please suugest.
Thanks,
SpandanaHi,
Is this standard program or custom program?
you might be appending the Z segment instead of inserting it. Always best practice is get the index of the segment and instert it.
If all the data is not populated then segment position will change incase of appending. Please check your code and revert back.
Refer the below link for detailed information.
IDOC Status 26: EDI: Syntax error in IDoc (segment cannot be identified).
Thank you -
Regarding EDI: Syntax error in IDoc (segment cannot be identified)
Hi,
My requirement is that I was adding two diffrent field values under two diffrent segments as "E1EDKA1" and "E1EDK02" in outbound invoice IDOCS, INVOIC02 (process code: SD09 - IDOC_OUTPUT_INVOIC).
I am getting the IDOC number through Tcode "VF02". Can any body give me idea how to check that syntax error in debug mode.
Please find the following error details using TCODE "WE02".
*EDI: Syntax error in IDoc (segment cannot be identified)*
*Message no. E0 078*
*Diagnosis*
*The segment E1EDKA1 does not occur at the current level of the basic type INVOIC02 (extension ).*
*This error can have several reasons:*
*The segment E1EDKA1 is assigned to a group whose header segment does not occur.*
*The segment E1EDKA1 does not exist in the syntax description of the basic type INVOIC02 (extension ).*
*The sequence of segments in the group in which the segment appears is incorrect.*
*Previous errors ('mandatory' segment or group missing) may be due to this error.*
Please help me to resolve this problem. <REMOVED BY MODERATOR>
Regards,
Skumar.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:09 PMIt seems that you added segment E1EDKA1 at a place where it is not supposed to be. That's where this error is coming from. The structure of every IDOC is definded by SAP standard and you cannot change the sequence or the level of standard segments. If you require a certain field at a certain level you have to add that field to a Z-segment and then add that Z-segment where appropriate in your extension.
Hope that helps,
Michael -
EDI: Syntax error in IDoc (too many repetitions of a segment)
Hi All -
We are getting an "EDI: Syntax error in IDoc (too many repetitions of a segment)" error message while processing the REMADV message in the payment run program.
Basic Type : PEXR2002
Message Type : REMADV
Segment Name : E1EDP02
This issue is due to BELNR length in above segment, since payment run program assigning the 45 chars but BELNR length is 35 char, is there any way or OSS notes we can implement to rectify the same.
Thanks in Advance.
Rds,
KHi,
This error is the segment definition violation. Open your BASIC IDOC type in WE30, double click on the segment TESTIDOC.
In the popup you can see properties like mandatory segment, Minimum number and Max number. Your IDOC is crossing the max number of repetitions it can have. If any of the segment definition perperties like this one, or improper position of the segment etc occurs IDOC is generated with syntax error.
Thanks,
Vinod. -
Syntax error in IDoc (too many repetitions of a segment)
Hi,
I tried to load master data from R/3 into BW system. The load is not ending and the IDoc error message is displaying,
The error message is " EDI: Syntax error in IDoc (too many repetitions of a segment) with status 26" .
I tried to analise the issue and checked in the Idoc List Outbox of BW system. I found Red status message with number 26 stating " Error during Syntax check of IDoc (Outbound) and the message type is RSRQST.
Could any one help me out in solving this problem. Reply to the message if any more information needed.
Thanks in Advance.
Regards
KoushikI'm getting the same error. I think it is because I have a InfoPackage selection routine, that selects more than 1000 select conditions. I guess it is a parameter that needs to be changed somewhere. Any help on this one?
BR
Øyvind -
hai
We have installed solution manager and CBTA for test automation. For SUT , We have created Technical RFC for development client and quality client
as TST_BID_CLNT220 and TST_BID_CLNT_909 respectively. Similarly SMBID_CLNT_220 and SMBIQ_CLNT_909 are the business RFC destination to connect SUT.
Now I have created test System data container which have both target system (Quality and development) . I have also created Test profile
for both . In the Test Profile I have mentioned Techinical RFC name , Test profile name, business user and password.
I have record va01 tcode in development client. The same script is used for quality also .
I am able to execute the script in development . But when I execute for quality it is giving following error
Error CL_TAO_GUI_SESSION_SM->Create: Mandatory Attribute missing for Technical RFC destination TST_BIQ_CLNT909
Can any one help me . Pls tell me whether I followed the steps correctly
Regards
JayaHi,
It will be very difficult to solve without being on the customer site and having all information.
Right now, the error code is network error...
Kind regards,
Yann -
Error status 26:Syntax error in IDoc (segment cannot be identified)
Hi Experts,
i extended one idoc which has the following structure
A(this is the parent segment)
z1
zz1.1
zz1.2
zz1.3
zz1.4
e1
e2
z2
zz2.1
zz2.2
zz2.3
zz2.4
I am using an user exit for populating the custom segment. values are getting poppulated.
My problem is all segments are coming in the same level. like below
A
z1
zz1.1
zz1.2
zz1.3
zz1.4
e1
e2
z2
zz2.1
zz2.2
zz2.3
zz2.4
Diagonsis of error.:
The segment Z1BPAD1VL does not occur at the current level of the basic type CREMAS05 (extension ZCREMAS05).
This error can have several reasons:
The segment Z1BPAD1VL is assigned to a group whose header segment does not occur.
The segment Z1BPAD1VL does not exist in the syntax description of the basic type CREMAS05 (extension ZCREMAS05).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
i have maintained we81 and we82. partner configuration in we20 is also maintained..
What might be the problem??pointers on this will be very helpful.
Regards
Sridevi SHi,
>check whether all the parent segments are filled before child segments .
>check the heirarchy level you r passing for each segment.
Regards,
Lokeswari. -
Hi,
when I make a syntax check on my Idoc segment '/FIT/E1FISFIINV' I get the error message:
Entries for segment '/FIT/E1FISFIINV' missing in the 'Segment structures' table.
I can't delete the segment type as I get the error message Segment /FIT/E1FISFIINV does not exist yet when I try it.
But I also can't create the segment type as I get the error message Structure /FIT/E1FISFIINV already exists
I already looke in the tables EDISDEF and EDISEGMENT to check that the entries for the segement /FIT/E1FISFIINV do exist in these tables.
Does anybody have an idea how to solve this problem?
Thank you.
MartinI want to create a new idoc type '/FIT/xxxxx' and therefore I want to create new segment types '/FIT/xxx' for this.
I copied the segment types from another system (older release) to that system but there seems to be a data inconsistency. which I am trying to fix. -
XI Business content for MDM - Syntax error in IDOC adapter
Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
<IDOC BEGIN="1">
<!-- The header data of each single ADRMAS-IDoc needs to be there but does not require specific data -->
<EDI_DC40 SEGMENT="1"/>
<xsl:apply-templates select="."/>
</IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveenMoorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen -
Hi,
We are getting syntax error in ORDERS01 IDOC. I have checked the E1EDP19 segment's maximum occurence is 5 which is a child segment of E1EDP01.
But the my outbound IDOC had more than 5 occurences in the segment E1EDP19.
It look to me that because of this we are getting syntax error. Please correct me If I'm wrong.
How can I change the maximum occurence value in an standared segment.
Thanks,
DharmendraHi,
change names while creatingwork are for that.
maintain order of the segments in order as for idoc.
check whether you are maintaining orderly or not.
Maybe you are looking for
-
Windows 7 and Windows 8 Driver Availability Chart for Creative's products
Hello Everyone, There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products. Thank you. Mod Notes: Updated the link and include Windows 8.
-
How can I make background objects in a template selectable
I have a Pages template with my signature embedded. It should move with the text but I cannot select it to make it do so. Does anyone know how this can be done in the new Pages 5?
-
Parking of Special GL document
Hi, I am trying to park a Special GL document (Employee Receivables) but i am getting the error message as "Special G/L transactions not defined for bills/exch.and down pmnts" Message no. FP030 Diagnosis You have selected a posting key with a special
-
MacBook Pro Retina 13 inch or non-retina 13 inch
Need a MacBook Pro
-
Error: Boot loader didn't return any data
Hi, I have installed 11gR2 Grid on VM guest and tried to reboot but it gave an below error and did not come up. Any ideas. Thanks. Start - /OVS/running_pool/204_devrac1 PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'c