Edir OU Objects Don't appear in Management Console

ZEN ESM Ver 3.5.0.154
I have created OU in Console One and created a Group so I can publish Policies to the group to reduce administration. The OU does not show up in the management console. I have tried rebooting, syncronising and loggin into the OU as well, with no luck.

Hi there,
With build 3.5.177 almost all of the issues you described are solved. The eDirectory integration part was greatly improved - I also suffered the issues you described in the previous releases, and you had to re-create the directory configuration in order for the new eDir objects to show up. Novell client is also not required anymore - pure LDAP communication.
As for encryption, I understand your pain as I passed for the same situation. The encryption filter driver is now improved and you'll not notice any impact on performance once you enabled it. Previous requirement for encrypting only non-system volume was almost unpracticable as no customer that I know of had more than one partition on their laptops.
In summary, I think it's worth to take a look.
We are here to help if any issue arises.
Good luck,
Daniel
>>>
From: chalmerst<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 5/15/2009 5:56 AM
Subject: Re: Edir OU Objects Don't appear in Management Console
dspinatto;1691558 Wrote:
> There is a new version 3.5.160 available for download at 'NOVELL:
> Downloads - Novell ZENworks Endpoint Security Management 3.5 IR5'
> (http://download.novell.com/Download?...d=D2kn-mCL_3k~)
>
> I couldn't find anything related to eDir OU's in the Known Issues
> section of the Readme
> http://www.novell.com/documentation/...me_zesm35.html,
> however maybe you can try with this newer version if it repeats.
>
> BTW, does the group shows up in the MC?
> Have you tried logging in as a user that is member of that group and
> then refresh the console to see it the group and the OU structure shows
> up?
>
> Good luck,
> Daniel
>
> >>>
> From: chalmerst<[email protected]>
> To:novell.support.zenworks.endpoint-security-management
> Date: 12/2/2008 9:56 AM
> Subject: Edir OU Objects Don't appear in Management Console
>
> ZEN ESM Ver 3.5.0.154
>
> I have created OU in Console One and created a Group so I can publish
> Policies to the group to reduce administration. The OU does not show
> up
> in the management console. I have tried rebooting, syncronising and
> loggin into the OU as well, with no luck.
>
>
> --
> chalmerst
> ------------------------------------------------------------------------
> chalmerst's Profile: 'NOVELL FORUMS - View Profile: chalmerst'
> (http://forums.novell.com/member.php?userid=37214)
> View this thread: 'Edir OU Objects Don't appear in Management Console -
> NOVELL FORUMS' (http://forums.novell.com/showthread.php?t=352773)
Sorry it's been a while but gave up after Novell tech sup informed me
that this was an issue in what was the current version at the time.
Groups that are created before the install of ESM show up and can be
published to, however, after ESM is installed if you create OU in NDS it
never shows up. Tech supp said this was an issue they hoped to resolve
in future releases. Besides this issue the data encyption had problems
as well, once the policy was published with data encryption dir the PC
utilistation went through the roof, again a bug confirmed by Novell.
There answer to this was a change that created bigger problems for our
company, you could only publish encrypted data dir to non system
volumes, however all our PCs in our company only have one partition.
Too big a job to create additional partitions to support this change.
I was using 3.5 ir5 when I experienced these issues.
I am querying this with novell since there seems to be an IR6 version
now. I doesn't show up on our product list yet. When it does I have
been tasked with testing it again to see if the bugs are out of it.
chalmerst
chalmerst's Profile: http://forums.novell.com/member.php?userid=37214
View this thread: http://forums.novell.com/showthread.php?t=352773

Similar Messages

Objects don't appear in PDF

Am using Acrobat Professional 9.2.0 with Mac OSX 10.6.5.
After saving files, when re-opening in Preview 5.0.3 as a pdf file only,
some objects fail to appear.
When re-opening in Acrobat, all objects appear as originally created.
My callout objects all appear, but some of my polygon objects don't.
Preview 5.0.3: Mac OS software for opening PDF files.

Mac Preview is not and never has been completely compatible with Adobe PDF's. You would want to take that up with Apple.

Adobe Muse: scroll objects don't appear in businesscatalyst

I am using the latest version of Adobe Muse, Muse CC 2014.2, I believe. When I "preview in browser," all my objects with scroll features enabled appear, but when I publish to my temporary business catalyst site at xxx.businesscatalyst.com, any object that has a scroll feature enabled does not appear on the site. I did not have this problem before the latest updates. Any help regarding this matter would be greatly appreciated.

No idea if this will work for a you but a good rule of thumb I like to follow when something goes wrong with business catalyst is to publish the site again and select "All Files" instead of "Only Modified Files" from the publish settings in Muse.

Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.

Any ideas how I can insert a pdf into word, using the insert object option. However the pdf i want to insert has text and lines annotated, but once inserted the comments don't appear???? any help would be greatly appreciated.

You will need to find a forum for MS Word since that is the software that you are trying to manipulate in this. If you think the processing/creation of the PDF plays a role then you should ask in the forum for the software that you are using to create the PDF.
This forum is for issue regarding downloading and installing Adobe trial products, so in any circumstance, your issue does not fit in this forum.

Managed Printers Don't Appear in Printer & Fax Preference Pane

Something curious to ponder. I've had this issue for a while now (though it's not a huge problem), where I have a managed Mac (managed via Mac OS X Server 10.6.8) that doesn't display the printers that have been added to a computer list via Workgroup Manager in the Mac's Printer & Fax preference pane. The printers do appear in CUPS (127.0.0.1:631), and the computer prints fine to the available printers, but they just don't appear in the preference pane. I've attached some screen shots for clarification.
Computer list in Workgroup Manager
(even with the Only show managed printers option unchecked, nothing shows up in Printer & Fax)
CUPS page on managed Mac
(All printers show up fine here)
Print & Fax Preference Pane
(Printers don't show up here, why not?)
Print dialog box in Safari
(Printers show up here)
Any ideas?

John Baughman wrote:>
It is as though Bonjour services are not functioning properly.
Thank you.
What happens if you start some type of sharing on the "problem" computer - iTunes Library sharing, File Sharing, or Screen Sharing - can the other 3 see what has been shared?

Anchor objects on spread don't appear in pdf

CS5 / Mac 10.6.4. Bug? I have multiple anchored objects in a long document. If the anchor reference is on the same page as the anchor object, all is fine on the pdf. If the anchor reference is on the opposite page (of a spread) then the anchored object doesn't appear on the pdf.

Mac Preview is not and never has been completely compatible with Adobe PDF's. You would want to take that up with Apple.

Some images don't appear in iPhone, but do on desktop.

Can someone download this PDF and let me know why the jpg images appear fine when viewing with desktop browser, but some images in the same document don't appear when viewing in Safari on the iPhone? Vector artwork and text show fine. Shows white space where JPGs should be.
Specifically, pages 1 and 4:
http://www.teamassociated.com/pdf/cars_and_trucks/TC6/Factory_Team/tc6ft_manual-mobile-4rg b.pdf

I just heard about this day before yesterday at the InDesign Print and ePublishing Conference in Washington, DC. When using display on an iOS device JPEG 2000 is not supported. There are two flavors of JPEG: JPEG & JPEG 2000.
Here's a Wikipedia article about JPEG 2000:
http://en.wikipedia.org/wiki/JPEG_2000
If I go to page 1 and 4 in your PDF and use Output Preview in Acrobat Pro (in Acro 9 > Advanced Print Production > Output Preview). Click on the Object Inspector tab and click on the image. It uses a JPEG 2000 filter.
Since I don't know how the image was created and saved, I'll leave it to you to resave it as normal JPEG.

All day events don't appear on my iPhone Calendar-

Hi,
I use iCal and I get all the event synchronized with my iPhone Calendar… except the all day events that don't appear…
How can I manage that ?
Thanks for yourhelp
Eric

Or did I make something wrong if my "All day" events don't appear on my iPhone Calendar?

Bridge: Images don't appear in Content Folder

(iMac OS X 10.5.2 (Leopard); 4 GB Ram; PS CS 3; Bridge 2.1.1.9; Raw 4.3.1)
All my images are on the MacIntosh hard drive under Cover Flow view. In Bridge, there are two main folders that contain images:: Window Documents ( deleted images from a color management program from a external hard drive/PC computer that I previously owned)) and Pictures (images transferred from PC to MAC). Problem: No images appear from the Window Documents Folder in the Content Pane in Bridge. Most images don't appear on the Content Pane from the Pictures folder with the exception of a few file folders. In the Preview Pane (Bridge) there are all sort of weird glitches. Previous to this problem I worked 7 1/2 hours dragging and dropping images from files in the Window Document Folder into selected folders in Pictures and deleting the images to Trash that weren't going to be kept. Everything ended well that day....no problems but the next day when I opened Bridge I couldn't access most of my images. At the bottom left hand corner of Bridge it tells me how many images there are but they don't appear. Summary: What I do know is that the images are on the hard drive, my computer is trying to open them up but something is preventing them from appearing in the Content Pane. Before I reach for that second glass of wine, can you please help? I am so frustrated and don't know where to turn for help in this matter. Thank you so very much. PS. I also can find the images in Finder when I right click on the mouse button on a file. I've tried using Tools>;Cache>Build and Export Cache. Images will appear but after I close Bridge they disappear into their deep dark hole!

Solved the problem myself. I retyped the name of each folder (same name) under Pictures and added a space plus #1 after each folder name. Images appeared almost immediately on the content pane after that was done. Later I will then open up on my hard drive, under Cover Flow, two windows....one from the Pictures Folder and the other one from the Window Documents that contain the images transferred from an old hard drive. I will then select the images I want to keep and drag and drop the images from the Window Documents to the sub-folders in Pictures and that should do it. Attempting to do it from within Bridge will cause the images in Pictures to disappear so this other way is safer. Then I will trash my Window Document folder when I'm done. If anyone has experience this problem this might be a way to see if my solution might work for you. (I formerly had a window system and now have a iMac).

Images on Robohelp are very poor quality/blurry or don't appear at all

Hello,
Any help on this problem would be greatly appreciated as I have been attempting to solve this for several hours a day for the past week.
I have a simple employee handbook in word (about 20 pages with images) that I’m trying to turn into an html-based document. I've tried a couple if things in order to get this file into robohelp. I've linked the word document to RoboHelp and worked with that, and I've also imported the word doc into framemaker and then linke my framemaker document to Robohelp.
I’ve managed to create the html version with a table of contents doing it both ways, but there are a few images in the word document that turn out really bad in the html version. They look fine in the word document and in pdf version, but when I view them in RoboHelp or in the html version of the document they’re very blurry and choppy. It almost looks as it pixels are missing. I’ve tried everything I could think of but nothing changes the quality of the image. As soon as I link the word document or framemaker document, when I click "view" on the specific image, or just view it from the handbook in Robohelp the image looks terrible.
Someone suggested that I checkmark "do not re-generate image" under project settings but now some of my images aren't appearing at all. All of my images are the same type but I've also tried changing it to png, or bmp, jpeg but nothing changes. They're either blurry or don't appear at all.
Thanks for any help or suggestions!

I don't know if this will help you, but I've had issues with poor image quality when importing Word documents into RH7. I see a fuzziness problem with most images--screen shot or not--but it seems really pronounced if the image in Word is reduced to less than 100%. To resolve this, I've opted to manually copy any Word images to another application (I use SnagIt), save them at 100% to PNG format (JPG and GIFs also work), and import the saved image files to Robohelp. That sounds like that's what you ended up doing with Photoshop.
Also, I wonder if it makes a difference how much the text was magnified/reduced when they took the original screen shots. I just did an experiment--using SnagIt, I took a screen capture of a block of text at 100% magnification. I then pasted the screen shot directly from SnagIt into my Robohelp document. It came in perfectly clean--couldn't see any obvious difference between the Robohelp text and the image of the Word text. I got the same results when I saved the screen capture to a PNG file and imported it that way. That leads me to believe the problem you're seeing is a result of having Word images automatically converted to RH.
(In the example--unfortunately hard to see-- the text in the red box is from a screen capture; the rest of the text was entered in RH8--there's no discernable difference in quality.)

CDs, flash drives, network shares don't appear on the desktop when mounted.

has anybody experienced this with os x tiger? i have experienced it on a wide range of powerpc macs (have not used an intel mac yet unfortunately) running all versions of os x Tiger (10.4.0 through 10.4.6)
when myself or users insert a CD, a usb flash drive, a firewire hard drive, connect to a network share, or even save a file to the desktop, the object does not appear on the desktop. it actually doesn't appear anywhere in the finder, not even in the finder sidebar. however with files at least i know they are there because i can see them on the desktop.
i've submitted a bug report to apple and i know they are working on finding out what is causing this. since i can't find anybody else having the problem i haven't ruled out the possibility that it is some 3rd party piece of software running, but i'm still doing my own testing. clamXav, temperature monitor, and the retrospect client are suspect and i'll need more testing to eliminate those as contributing factors to this bizarre finder behavior.
has anybody else experienced this with os x tiger? did you get it corrected? thank you

whoops, i meant downloaded files don't always appear on the desktop but i can see them in the terminal. it's been a long day heheh.
all three checkboxes in finder preferences are on so they should show on the desktop, i haven't done anything in open firmware yet. so far the system is running smoothly with clamXav turned off, it's possible version 1.0.1 (what i was running) was incompatible with tiger. the retrospect clients are all at the latest version released by emc/dantz.
i'm thinking less and less that it is a bug, especially since i can't find any mention of others having that issue on these discussion boards.

Text objects don't snap properly

Has anyone noticed that text objects (and in particular point text objects) don't snap properly to guides even if Type Object Selection by Path Only is checked in Preferences? I'm on CS2 but on older versions of Illy this was never a problem. The objects appear to snap, but when you zoom in you can see that the snap wasn't accurate and the text point didn't stop on the guide.
Neither does Average work for text points any more. Sure you can use Align, but this sometimes produces unexpected results because it seems to measure the type itself and not the points as you would normally expect. The same thing applies to Distribute Spacing. It produces unevenly spaced lines instead of distributing spaces between points or groups of points.
Has anyone got a method of aligning the points of text objects accurately? I always used to use Cmd+Alt+J (either vertical or horizontal) but there seems to be no way of doing this any more. Maybe it has been corrected in CS3, but it seems that there are so many bugs in CS3 that I don't think I want to go there.

It's been my experience with iDVD in iLife that it is only for basic, quick & easy dvd creations with some presentation. I currently use DVD Studio Pro by Apple and it gives you the option you are looking for commonly referred to as motion marker points. Anyway, I hope this helps.

My Mac Mini (Mid 2011) doesn't connect to Time Capsule in 5GHz Network. This WiFi Network don't appear in the WiFi list. What's Wrong?

My Mac Mini (Mid 2011) doesn't connect to Time Capsule in 5GHz Network. This WiFi Network don't appear in the WiFi list. What's Wrong?

Oh yes, & 5 GHz doesn't do walls very well at all.
GHz and Network Range
The higher the frequency of a wireless signal, the shorter its range. Thus, 2.4 GHz networks cover a substantially larger range than 5 GHz wireless networks. In particular, the higher frequency wireless signals of 5 GHz networks do not penetrate solid objects nearly as well as do 2.4 GHz signals, limiting their reach inside homes.
http://compnetworking.about.com/od/wirelessfaqs/f/5ghz-gear.htm

BAM 11g - Data object doesn't appear!!

Hi!
I'm doing the QuoteProcessLab, now I'm doning the BAM lab. It says that after running the setup.bat and redeploying the project with the settings that enable BAM, I should see in the BAM Page a BI_DEFAULT_Composite_Process, but I don't see that data object.
I have run again the setup.bat and redeployed the project and the data object doesn't appear!
Am I missing some step?
Thanks in advance!
Ana

Chris,
All the details of what the filter is doing are hidden. They only appear on the configuration dialog or in the code inside the Express VI. Without the actual code (an image is useless) we cannot tell.
Most likely the filter is configured in such a way that the output is empty so that there is nothing to write to the file.
Try putting some indicators at the input and output of the filter to see what is there.
Lynn

Disconnect object using a script (not from FIM Management console)

Hi,
Is there any way to disconnect a connector from its connected Metaverse object using a PowerShell command or wathever?
For the moment we use the Management Console to achieve this operation by clicking on "disconnect" to force the connector to become "disconnector".
Thanks for your help.

Thank you for your reply,
The deprovisioning process works fine and is not the purpose of what I want to achieve.
What I want to do is to disconnect an Connector from a MV object to reconnect it to another MV object because the join rule isn't valid anymore.
The case is as follow :
An Active Directory user is linked to an identity in our Identity Management System using a UserID which is mapped to employeeId attribute in AD user.
If the employeeID in AD is modified (by another Management Agent for example), I want to connect the user, with the new employeeID, to the correct MV object and hence to the correct ID in our system.
The main idea is to store some information from AD user such as UserPrincipaleName or sAMAccountName in the correct identity.
Unfortunately, the join rule isn't evaluated for the "connected" Connectors but only for "disconnectors" (unless there is an option to re evaluate the join rules for all objects that I don't know).
So to connect the user to the correct MV object, I have to disconnect manually the Connector to make it disconnector and re-sync. The sync process connect automatically the user to the correct MV Object which provision attributes from AD user to the right
ID and "delete" attributes from the former ID in our system.
Thanks for your help.

Edir OU Objects Don't appear in Management Console

Similar Messages

Maybe you are looking for