EDirectory and 3.4 and 3.1 Client

Greetings,
Over the weekend we upgraded two servers to eDirectory 8.7.3.3, NetWare 5.1 sp7. On one server we can still use the Windows 98 client 3.1 and login successfully. On the other server the 3.1 client fails. Any ideas on why one works and the other does not?
We also added NFA to both servers.
The only diff in the NLMs is the drivers for the hardware and the one that does not work also has lic_api.nlm and tui.nlm loaded. I unload the lic_api.nlm but that did not make the 3.1 client work.
Thanks!
Jeff

Yes, 3.4 does work. My question was why 3.1 does work with one server but not on the other when they both appear to be the same. They both have the same version of NetWare 5.1 sp7 and eDirectory 8.7.3.3. Maybe it will just be one of those mysteries. If I can figure this out then we will not have to worry about upgrading clients before we upgrade to eDirectory on our other 40 server/sites.
Thanks!
Jeff
>>> Edison Ortiz<[email protected]> 4/6/05 7:18:15 PM >>>
On 4/6/2005 Jeffrey Beard wrote:
> Yes I can ping the server. DS.NLM is loading. Other clients with current
> versions login fine.
Then, it's clear that version of eDirectory does not support v3.1 for some
reason. I suggest going with v3.4 since you just said it works.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

Similar Messages

802.1x, eDirectory, and RADIUS

Hello all:
I hope that I am posting on the correct forum.
We currently have a Cisco ACS 3.3 which we have configured to use
eDirectory as an external LDAP directory. We are currently able to set
up access to our routers and switches via TACACs and successfully
authenticate via user names and passwords stored in eDirectory, so we
know that the LDAP access is working. eDirectory version is 8.7.3.4. OS
is Netware 6.5 sp 3.
We are now embarking on setting up wireless authentication utilizing
the AEGIS client from Meetinghouse as our supplicant. We have been
successful in authenticating to our test wireless AP (Cisco 1200) with
a user setup in an access group on the ACS using the ACS as a RADIUS
server. We are authenticating via LEAP. However, we have not been able
to authenticate using eDirectory usernames and passwords. Upon
reviewing various posts I have seen info about adding RADIUS attributes
to eDirectory to use the FreeRADIUS server. Is this necessary with the
ACS device? Do we need to change our protocol to EAP-TTLS as is
suggested in other posts or do we need to set up simple passwords? What
security considerations do we want to take into account?
If anyone has successfully implemented this configuration, please feel
free to contact me directly. We want to leverage eDirectory and our
client's experience with this platform to make wireless security as
seemless and secure as possible. This is a school district and we want
to be able to limit our user access via login names that they enter on
any machine in the district rather than via machine certificates. That
way if we want to deny a student access for disciplinary reasons, we
can implement it very easily.
I would greatly appreciate any assistance that can be provided!!!!!!
Donna Moyer

Heiti
I sent you an email regarding our situation. Have you received it yet
and if so have you had a chance to respond to the wireless
authentication questions.
Thanks
heiti@boras_nospam_.se wrote:
> Nope....the easiest way to do it, is to use eDirectory for authentication
> only and let the acs server do the other stuff.
>
> I quess that the only time when you need to to so is when you are
> connecting to netware RADIUS via PAP over EAP-TTLS tunnel.
> You can do that with freeRadius but not with ciso ACS.
> And the only clients supporting that are Intel Proset, Aegis and Odyssey
> but not the Ciscos or Microsofts supplicators.
>
>
> Whitch metod to use depends on what environment you have;
> In a school environment(or a environment where computers are shared among
> many users) and Novell Client installed, you should use PEAP (PEAPv1;GTC)
> instead of EAP-FAST and use the pre-logon stuff on the supplicator.
> And use a static user in the profile configuration(and you event dont need
> to have the user credentials in edirectory), istead of prompting the
> password and username all the time.
> (Because you are needing the IP-address before the novell Client tries to
> logon.)
> That should give, in a user point of view, a Single Sing On functionality.
>
> In a opposite environment where there is a single profile(user) on each
> computer you can use EAP-FAST(with manual PAC provisioning) or PEAP with
> eDirectory (or LDAP) as the autehticator database, and prompt for Username
> and password eatch time.
>
>
> The ultimate method would be a Novell Client supporing EAP and a Novell
> RADIUS server supporting EAP-FAST/EAP-TTLS or PEAP.
> That should ease upp everyting a bit and give a clean environment and
> Single Sing On functionality =)
>
>
> PS. PEAP gives the advantage against EAP-TLS that PEAP doesnt need a
> client certificate only a server certificate.
>
>
> Method Database Certificate
> -------------------------------------------------
> EAP-FAST LDAP/NDS/Etc. No, only PAC
> PEAPv0(MSChap) AD Server
> PEAPv1(Gtc) LDAP/NDS/Etc. Server
> EAP-TLS LDAP/NDS/Etc. Client, Server
> EAP-TTLS NW RADIUS(PAP) No
> LEAP AD No
>
>
> feel free to ask more!
>
> best regards,
> Heiti Ernits
> Network Technician
> Adk-Data
> Bors Stad

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
1. Client Os : Windows 7 Pro
2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate with friendly name sky.mti-itservice.no activated.
The main problem is following: The RDP logon session never ends
Any ideas ?
Regards
Kenneth Knudsen
Email : [email protected]
mvh Kenneth Knudsen MCSE 2003 HP ASE

Hi Kenneth,
Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
You can setup the session time limit in different method.
1. Open the Server Manager, select Remote Desktop Services.
2. In Remote desktop Services, in right side you can drop down to collections.
3. Select the collection which you want to edit the settings.
4. Under collections Properties, select Task and then Edit Properties.
5. In Properties dialog box, select Session.
6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK.
And apart also by group policy setting as below.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
- Set time limit for disconnected sessions
- Set time limit for active but idle Remote Desktop Services sessions
- Set time limit for active Remote Desktop Services sessions
- End session when time limits are reached
Please check which setting suitable for your environment and you can apply for your case.
[Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

BO XI 3.1 SP3 SSO with CMC and Webi Rich Client

Hello,
Is it possible in BO XI 3.1 SP3 to use SSO with CMC and Webi Rich Client ?
It works fine with InfoView, Designer and Desktop Intelligence.
Regards

Hi,
What kind of SSO authentication are you trying to set up? (AD, LDAP,...)
I think it's AD regarding your command line.
But be aware that in SSO, you don't need to configure the command line to run the client.
Have a look at the following guide.
[Configuring Manual Kerberos Authentication and-or SSO in Distributed Environments with XI 3.1 SP3.pdf|https://bosap-support.wdf.sap.corp/sap/support/sapnotes/public/services/attachment.htm?iv_key=002007204200000183782010&iv_version=0005&alt=2BCE4CB10DF674B172F4F3F7B32A284F49333135358877720E883731B332AF34CACD2AB52C0A2C8DCACA09084EF4CB494E4E0F2ECE8E2F89772908C9CE70CD2DF77675F7F2D1750C09514BCECFCFCE4C8DCF4BCC4DB5F575F4F4F3F57771F571F6F70B01B25D83D4120B0A722092A599504EB16D715E3E00&iv_guid=DF838310BFAAE8F1B486001A64C54696]
Regarding accessing CMC with SSO, it's not recomended at all as if you break this access, than you can't connect anymore to the CMC and modify settings.
Regards,
Philippe
Edited by: Philippe Tavares on Feb 15, 2011 4:11 PM

How do I use pots on my client machine to change values, from the field, on my server machine and all other client machines?

I am using Lookout 4.5, build 12, and I am having a problem concerning pots. I have data tables created for the different size sewer stations my system monitors. For each station, there are setpoints for starting and stopping of the pumps. I want to be able to change the setpoints for a station on the client file using a pot and have it change on all other machines running Lookout. I did this in 3.8 using DDE, but I don't want to use DDE anymore.
I created a pot on the client file and URL'ed it to a pot on the server. On the server I created a table with a generic member "A" named "Lead Setp" and then created a member "A1" named
"C5_1LeadSetp" then a member "A2" named "C3_1LeadSetp" and so on....
In this table I connected the generic member "A" to the Pot I created on the server, and I connected A1 to its corresponding setpoint signal coming in from the field.
On the client file I connected (in the table similar to the one on the server but with all signals for the station) the "A1" member to the setpoint signal coming in from the field, and I connected the "A" member to the Pot I created on the client file which is URL'ed to the pot on the server file.
But, when I change the value of the pot on the client file, only the pot on the server and the "A" member in the table on the server change to the value of the pot on the client. The "A1" member whose screen I am changing the values from on the client does not change! This is the last thing I have to do and my file will be completely converted to 4.0. Does anyone have any ideas?
Thanks for any responses..
GBWY
Jason
Jason Phillips

Hi Jason,
If I understood your task correctly, you want to change the Setpoints on the Server DataTable using Pots from different clients. And also reflect these changes on the clients locally.
You correctly remoted the Pots on the Clients to the corresponding Pots on the Server. However, you do not need tables on your clients. All you need is Expressions on each client to the particular cell of the Clients.
So, to summarize: On the Server, the Pots write to the DataTable. And since the Pots on the Clients are remoted to these Pots on the Server, you can affect any change using these Pots. Because of the common remote source (Server Pots, i.e.) all of these Pots will always be in sync. Finally, to get the Setpoints on the Clients, just insert Expressio
ns to the Server's DataTable.
I am attaching a simple example (exmpl.zip) which does this. There are three processes -- My_Server, My_Client1, and My_Client2. I had them setup on the same machine so the paths are all process relative, but you can always change those to computer relative or absolute and move the client processes to diff machines.
Hope this helps.
Rgds,
Khalid
Attachments:
exmpl.zip ‏12 KB

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Win 8 and 8.1 client showing shared printer server as offline

Hi,
we have a problem with our print environment (HP and Ricoh printers).
We have some Windows 8 and 8.1 clients and a Windows Server 2008 R2 printserver.
Windows 8 and 8.1 is showing the printers as offline. Its seems the problem described here ->
http://support.microsoft.com/kb/2713128
We already installed the fix on the server but this didn't resolve the issue.
Maybe somebody have the same issues and an alternate solution for this?
Best regards

Hi,
Thanks for posting in the forum.
So far, there's no fix for Windows 8. Since you have tried the hotfix you mentioned without any help, please also try to install this update to see if it could help.
Update rollup: Fix printing problems in Windows 7 and Windows Server 2008 R2
http://support.microsoft.com/kb/2647753
If the issue persists, please try to refer to the following articles to troubleshoot the issue.
Printer shows as “Offline” in Windows 8 (Workaround)
http://www.blakepell.com/Blog/?p=611
How to: Fix a network printer suddenly showing as offline in Windows Vista
http://blog.rtwilson.com/how-to-fix-a-network-printer-suddenly-showing-as-offline-in-windows-vista/
As it mentioned in the article above, please try to open the print queue dialog and choose “Properties” from the “Printer” menu that it would connect to the printer and bring it back online.
Also, maybe disabling SNMP support for network printers will work.
Here are some similar threads as reference, hope they could help.
Network printer shows offline on Windows 8
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/network-printer-shows-offline-on-windows-8/7851703b-492c-4e97-8063-f1fc2aa63ec0
Network printer still connected, but shows as offline
http://answers.microsoft.com/en-us/windows/forum/windows_xp-hardware/network-printer-still-connected-but-shows-as/90e0dd64-d4a3-41f2-a361-05947988bdee
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.

Advantages and Disadvantages of Client Object Model in sharepoint 2013

I need Advantages and Disadvantages of Client Object Model in sharepoint 2013
like below in javascript. Users will have read/edit and approve access to the list.
var clientContext = new SP.ClientContext.get_current();
var oList = clientContext.get_web().get_lists().getByTitle('Workflow Tasks');
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Thanks
AlexanderShelopukho for
right answer!
Alex-
I do not need comparison-
I need Advantages and Disadvantages of Client Object Model in sharepoint 2013
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Difference Between Oracle ADF and ADF Rich Client

Hello Gurus,
I want to know the difference between those two:
Oracle ADF:
http://goo.gl/6Q1i2
and
ADF Rich Client:
http://goo.gl/L31ra
I downloaded Jdeveloper 11g (11.1.2.3.0)
I did this tutorial which It adf right? http://goo.gl/8Mf7c
and this other is rich client right? http://goo.gl/7Krew
Can I please know the advantages of them over the other one? THANKS !!!

ADF Faces Rich Client Components are a part of Oracle ADF.
So Oracle ADF uses ADF Faces as the components for the rich web UI, but it also offers things like simplified database access through ADF Business Components, an advanced ADF Controller layer, and simple data binding.
I would suggest starting with this seminar:
http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/Introduction_To_ADF/Introduction_To_ADF.html

How to deploy Forms, Reports and Menu from Client to Server machine

Dear Experts,
I have one requirement to deploy the Forms, Reports and Menu from client machine to server machine.
Deployment involves the following steps :
1. Firstly we have to search the selected file in a folder where the .fmx is present ( in Server machine) and take the back up of the the existing file in the server (Source and destination paths will be available).
Ex. If the existing FMB name is TEST.fmx then the backup file should be TEST_sysdate.fmx.
2. Secondly we have to transfer the file from the client folder (or from another folder of the same server) to the server folder where the back up exists.
Please help me to search/rename/copy/replace the _.fmx/.rdf/.rep/.mmx_ files from client to server.
We are using
9i Database.
10g Forms and reports.
SQL Developer tool.
OS is Windows (Client and Server).
Help me out to attach a file of front end screen which we are planning to develop. It will give a clear picture on this requirement.
Thanks :)
Edited by: 941175 on Jun 17, 2012 9:09 AM
Edited by: 941175 on Jun 17, 2012 9:12 AM
Edited by: 941175 on Jun 17, 2012 9:14 AM

941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards,

With the new Time Capsule does the beam forming occur with multiple clients, and do these clients have to be 802.11ac compatible?

With the new Time Capsule 5th Gen does the beam forming occur with multiple clients, and do these clients have to be 802.11ac compatible?

does the beam forming occur with multiple clients
Yes, but Apple is unclear about how many cients can be connected simultaneously with this feature.
do these clients have to be 802.11ac compatible?
Yes

Why not jdeveloper creates the persistance unit and the session client and

why you do not create the persistance unit (outside) and the session client and ...the interface and other required opjects automatically when I create the application or the project?
why you are using symbols like AFD, JSF, JSP, JPA,.JEE...and tens more, why you do not use a meaningfull names of these process symbols.
Thanks
Ali

Asalman,
I'm quite happy the JDeveloper behaves the way it does. Why? Because in most of my scenarios I don't want to be driven in a particular direction of development. This my choice of development and I don't like tools that dictate this to me.
--olaf

Sending invoices and reminders to clients thru e-mail messages

Hi
I would like to know if there is a standard functinality in Receivables module to send invoices and reminders to client via e-mail?
I there is please inform where i can get some information, if not please advise in a few words how we can customise this .
Thx and regards
Ozlem

Hi shaun,
Payment advice is transfer to the external sytem. It means we need conectivity between 2 systems. I need to configure EDI settings. You need to contact the ABAPer and Basis consultant for your configuration.
Regards
Odaiah Pelley

Connection between oracle 9i server and oracle 9i client

hi there,
i have installed both oracle 9i server and oracle 9i client in my system.how can i connect these two to have connection between these server and client?
Because i was using only 9i server for creating database and for other purposes.i have not used 9i client yet.
Please write me the answer.
Thanks in advance.

Hi Balu,
If you have the Oracle 9i Client, you can just edit your TNSNAMES.ora file of your client to have a TNS Entry for your new Database & try connecting it. You just need to try TNSPING & ensure that you can reach the Listener.
Are you facing any specific problems ?
Regards,
Sandeep

Can't get username and password into client proxy

Hello all,
I am creating a client proxy using class xem_measurementImport (the doMeasurementImport method). I call this from an ABAP program, and it pushes measurement data into the EC (Environmental Compliance) system, which runs in Java. Everything has been running well, except for one thing. When I run the program in the foreground, it prompts me for a username and password, and when I run it in the background (it will be run that way in production), it gets a SOAP/authentication fails error message from the method, since username & password could not be supplied. I tried to recreate my client proxy, but when it is created, the wizard does not prompt me for my name & password, which it should do, so that it can supply it to the calling program via the logical port. Is this a configuration issue that Basis needs to address? Thanks for any help you can give.

gauravjlj wrote:
because client will install the mysql not me. and I need username and password for the further programming.
there is any file in mysql installation which can give me the username and password.
please tell me.
thanks
gaurav agrawalNo. If the "client" is installing the DB (and, I assume, administrating it, I.E. removing the large security holes that exist in the default installation), then why don't you simply ask the "client" for this info a dialog?
Otherwise, you should be providing a script in your installation package that modifies the DB to your needs, and instruct the "client" to install a "default" root password until after the script has run, and then to change the "root" password again. A Java application should definately not be worried about this stuff.

EDirectory and 3.4 and 3.1 Client

Similar Messages

Maybe you are looking for