Edirol FA-66 Delay before hearing sound

Macbook Pro 17 with snow leopard 10.6.1 using Edirol FA-66 with firewire connection. Works OK at first but as soon as I change an effect or most any change there is a 2-3 second delay before I hear my guitar. I'm using headphones connected to macbook for output. Anybody got any ideas?

I have the same problem with both Garage Band 09 or Logic Express 9. I'm under Snow Leopard 10.6.2.
When I start monitoring it's OK, then after 1-2 mins of playing, I will start experiencing a delay of 1-2 secs in the monitoring. I wonder if this problem is specific to FA-66/SL...

Similar Messages

  • I have a new impulse 61 key board and i have garage band. when i hit a key the sound has a delay before i hear it, i also have it hooked up to a bose radio. is there a way to correct this delay?

    I have a keyboard Impulse 61. I have it hooked up to the imac and then to a bose speaker thru bluetooth and i have a long sound delay from when i hit a key until i hear sound. Is ther a fix for this delay?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • For 1/11/11 expert day: can hear sounds on headphones but no sound via the internal speakers

    HP Pavilion dv6135nr Notebook internal speakers have stopped working.  I can hear sounds on headphones but no sound via the internal speakers.  A search on HP customer care for my notebook yielded the download recommendation below, even though I had not stated my problem.  However, executing this download did NOT resolve the problem.  Please advise regarding resolution to inoperable speakers.  I do not know if all of my sound and audio settings are correct, but the mute is not on and the volume controls are properly set.  The default device is Conexant High Definition Audio output, per the sound and audio devices properties hardware  tab the device status states "this device is working properly."  Is it possible that a Skype or Foxfire update is in conflict with this device?  If so, how do I resolve this situation?
    Thank you.
    Description: This package contains the driver for the Conexant High Definition Audio Chip.
    PURPOSE: Routine Details and specifications File name:
    sp34204.exe [1/1, 1.38M]
    System requirements: HP SoftPaq Number SP32646, "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio," (or later) must be installed on the notebook before installing this SoftPaq. Look for HP SoftPaq Number SP32646 (or later) in the Software and Driver Downloads section of the www.hp.com website. Released: 2006-12-01 Version: 3.26.0.0 A Compatibility: Microsoft Windows XP Professional, Microsoft Windows XP Home Edition, Microsoft Windows XP Media Center, Microsoft Windows XP Fix/Enhancement: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.

     Re: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.
    HOW DO YOU FIX THIS?? I cannot find the correct Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio that works with my computer...
    My computer:
    VISTA
    HP Compaq 2230s Notebook PC
    Everytime I use my headphones for more than an hour or two, the **bleep** audio will not play on my notebook's speakers, just through the headphones. Usually restarting a few times resolves the problem, but not this time. If I knew that HP computers sucked this much I would never have spent so much money on this one!!!
    Can you please tell me how to fix this problem once and for all? Thanks!!

  • Cant hear sounds from wine ingame?

    I can't hear sounds within wine games but if i open winecfg and click test sounds, i hear a faint sound, so im not sure if my audio is low for wine or what. i don't know how to set the volume for wine if that's what it is because when i open the alsa mixer it has nothing but the speakers actual sounds and not the programs. please help?!
    also, i am new so i don't know much yet.

    I really wouldn't be bumping this dead topic, if I wouldn't be experiencing exactly the same (or at least very similar) problems.
    There is one major difference though, I didn't notice this problem until I installed Command & Conquer 3, as it's the only game that lacks sound. In the other two games I have, that is Age of Empires 2 and Medieval 2: Total War, sound works.
    So I didn't notice it before.
    I was trying to solve this by myself, but I just didn't find anything that could be the problem.
    So here it's how it is.
    If I set sound in winecfg to HD-Audio Generic  ALC889 Digital that is exactly the soundcard I have I have no sound whatsoever in Command & Conquer, but sound works completely okay in other two games.
    If I set to default or system default, then there's sound in all but with high latency, a lot of noise and a bit of echo. In AoE this goes away once you get to the actual game the latency, noise and echo disappear, but in C&C it only kind of disappears and can still be heard. It's not just faint or whatever, it's actually quite audible and does make the game unplayable (especially the echo).
    So if anyone has any idea what to do, please tell me. I think I once had this problem and managed to solve it, but I can't remember how I did it.

  • Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

                      Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.

    Take each of the following steps that you haven't already tried.
    1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
    2. From the menu bar, select
     ▹ System Preferences ▹ Sound ▹ Output
    Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
    3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
    5. Reset the NVRAM.
    6. Reset the SMC.
    7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
    8. Make a "Genius" appointment at an Apple Store.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • Hİ My ipad's screen is black. When it  take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

    Hİ
    My ipad's screen is black. When it  take charge, I can hear sound but still black. I press and hold both the sleep and home buttons for about 10 to 15 seconds but this doesn't work. Screen still black! PLS HELP ME!

    How long did you let it charge? It may take 30 minutes before the iPad responds when the battery is completely drained. Let it charge for at least 30 minute using the wall charger. Then rest the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot.
    If the iPad restarts let it continue to charge until the battery is 100%.
    If the iPad still does not start make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Any way to change delay before voicemail picks up?

    My wife's iphone swithces to voicemail after the third or fourth ring (She is using "Old phone,"), and she misses a lot of calls. Is there a way to alter the delay before voicemail picks up? I looked in settings, searched some, and couldn't find any information. Thanks.

    To backup Nathan's informed response...This is the AT & T Answer Center response...
    QUESTION:
    How can I adjust the number of times my wireless phone will ring before the caller goes to voicemail?
    ANSWER:
    Contact Customer Care at 1-800-331-0500 or dial 611 from your wireless phone to change the amount of time your phone will ring before going to voice mail. The adjustments made by Customer Care are based on the traditional ring heard by the caller, not the unique Ringtone you hear from your phone.
    I chose to speak with a Customer Care representative and easily extended the time to 30 seconds.
    ;~)

  • When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.

    When I get an alert from my car sat nav the music on my iphone has a long delay before it comes back on and misses a part of the track why does it do this.
    It only seems to do this since an iphone download last year.......its driving me mad !

    See:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    To copy iTunes purchases to the computer you have to log into (authorize) the account that purchased them and them transfer
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    When associating a device with an Apple ID see the following regarding the 90 day limit.

  • When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except for my movies. I can hear tv shows, music, videos off YouTube, etc. I just can't hear the movies. Any ideas of what may be wrong?

    When I connect my iPad2 to my tv using the AV adapter I can hear sound for everything else except movies. I can hear tv episodes, music, YouTube videos, etc. anyone have an idea of how to fix this issue? Thank you for your help in advance.

    Just connect the new iPod to your computer and setup the iPod via iTunes (instead of via wifi).
    If you want to copy all the infor from an old iPod touch to the inew iPod see:
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

    So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

    In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
    Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
    Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
    I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

    First, are you referring to packages or applications because the behavior is different.
    Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
    errors.
    Jason | http://blog.configmgrftw.com

  • I cant hear sound on my laptop

    i cant hear sound all of a sudden

    Hi
    You have a couple of options as I see it.
    Please First check if the speaker icon on the unit is not muted.
    Go to device manager and uninstall the Sound driver and restart and unit will install the driver automatically.
    Try doing System restore to the date when the unit was working fine.
    Try to update the driver from hp.com website for Audio & Bios.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
    Also make sure that you are selecting built in speakers for your audio output.
    If that does not fix it try doing a Pram reset.
    Shut your mac down.
    Press the startup button.
    Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

  • Delay before the Delete option is active after selecting messages

    Previously I could select numerous messages (Command-A) and immediately press the Delete button in the Mail menu bar to delete the selected emails.
    Since the update, there is now a delay from the time the messages are selected until when the Delete icon is active and can be clicked. It stays grayed out for maybe a second or two, like it's still processing the previous select all command. Although not a big deal, it's worth noting there was no delay before the update.

    You ask:
    So, how can I do that please?
    But you have already answered:
    selecting the photos on Album view, then pressing CMND OPTION DELETE, then CNTRL-CLICKING on iPhoto's Trash icon and choosing "Empty Trash".
    Sorry but I really don't understand what you're asking.
    Regards
    TD

  • I can hear sounds from my laptop but cant hear using headphone

    i am having hp pavillion g 6-1220se,serial no:5cd146766w,Product no-a8s15ea#abv.the problem is i can hear sound for  some application like skype through my headphone,but cant hear any sound while playing movies .but my system speakers are working fine.please resolve this as early as possible,as i bought this hp only nearly one month ago

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for