Edirol UA-25EX Sound Input not working after 10.6.6 upgrade

Hello,
I am using an Edirol UA-25EX sound card for sound input (mike) and output.
Since I upgraded to 10.6.6, sound input is not working anymore.
I tried to unplug / replug. I tried to reboot. I tried to uninstall and reinstall Edirol's driver for Snow Leopard.
Nothing worked. Any help ?
Thanks
Seb

By switching the sampling rate at the rear of the device, unplugging and replugging it, I manage to make it work again
Strange
Seb

Similar Messages

  • My sound is not working after downloading windows 10

    My sound is not working after downloading windows 10 please can you help me?

    right click start then select device manager see if there are any yellow ! in triagle symbols next to any device if there is you may need to reinstall the audio driver

  • My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

    my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

    Welcome to the HP Forums  MillaMagia,
    I see by your post that the USB isn't being recognized.
    I can help you with this issue.
    Are you using the same USB cable? (known good USB cable)
    You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
    USB 3.0 are supposed to be backwards compatible.
    Try another USB port on the Laptop, some of the USB ports are more powered then others.
    I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
    Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
    How do I get into Windows Device Manager?
    Here is a document for Identifying problems in Windows Device Manager.
    Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
    Let me know how it was listed. (screen shots welcome)
    If this is a Laptop then check the power management settings.
    Access the device manager. Windows 8-How do I access the Device Manager.
    Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
    Disconnect the USB, run the full uninstall and reinstall the printer software again.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • IMessage not working after iOS 5.1 upgrade! Feedback pls

    iMessage not working after iOS 5.1 upgrade, anybody experiencing this as well? Feedback please......

    You shouldn't have to hard restart and it shouldn't have anything to do with your router.  If anyone else runs into this problem try resetting the network settings on your phone.  All the steps to do this can be found here http://tekshot5.com/ios-5-1-imessage-fix/
    Edit: Some of us don't have the option of resetting our DNS servers.  I run my own for example for caching purposes.

  • My new iPad sound is not working after updating to ios 6.1

    My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

    Hi,
    I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
    I Have tried:
    - Updating to iOS 6.1.3
    -re starting the device
    -checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
    -going into general settings and reset all settings
    -the device reset several times (waiting until I saw the all important apple logo)
    -removing the last few apps I installed.
    Nothing at all has worked, please help!
    New iPadiPad

  • Alerts sounds are not working after upgrading to iOS 7.1.2

    Hi,
    I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
    I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
    Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

    I got this issue resolved.
    It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
    It has been fixed by cleaning the charger slot by toothbrush! with some
    drops of a cleaner.
    Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

  • [SOLVED] Sound (snd_hda_intel) not working after resume from suspend

    Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
    Running the following brings back the sound, but that is obviously a hack:
    fuser -k /dev/snd/*
    rmmod snd_hda_intel
    modprobe snd_hda_intel
    /etc/rc.d/alsa start
    I have on my /etc/modprobe/50-sound.conf:
    options snd-hda-intel model=laptop
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    Here's the exact hardware specification:
    # lspci -nnv|grep Audio
    80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
    Any idea where to look for this?
    Last edited by yhager (2009-08-21 16:54:00)

    [SOLVED]
    I downgraded to kernel 2.6.29 and the problem is gone.
    Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

  • 7 u j m keys not working after 10.8.1 upgrade, late 2008 aluminum Macbook

    That's all, these keys do not work after update/upgrade today. They were working fine right before i did the update and are not working now. If I hit the M ket a few times i do get some garbage. Help?

    Thanks, but still the same. It boot normally only if there isn't any usb device attach to the computer. I'm using usb mouse instead of bluetooth mouse and it happens not to boot normally like usual.
    The technician said it would be okay if any usb devices attach to the computer during the boot apparently it won't boot normally.
    Any alternative sir?

  • A1: Home button not working after Ideapad A1 ICS upgrade

    So yesterday I finally tried the ICS upgrade for my Ideapad A1. It worked OK besides all data on internal memory and SD being deleted so I had to reinstall all my apps or restore from Titanium backup.
    In any case the only real problem is that the home button is not working after the upgrade. Does anybody else have this problem and maybe even a solution?
    Thanks!

    Hi, Im using A1 16G and tried to upgrade to ICS for couple of days i read too many articles in different forums....
    Can you put any instruction on how you made it?
    Thanks

  • Sound effects not working after upgrade

    After upgrading to Yosemite, my system sound effects are no longer working. Instead of hearing my selected Basso sound, my entire screen flashes.  Other sounds, such as the audio track of a video, still work fine. If I use the "afplay" command I can hear a system sound. I also get sounds for incoming and outgoing mail.  But clicking one of the system alert sounds in the "Sounds" preference pane does nothing audible, and in other places where I used to get a Basso sound,  my screen flashes instead.  I'm aware of the Accessibility option that gives the screen flash in lieu of an audible alert, but that is turned off, and I have tried turning it on and back off again, to no avail.  My "Alert volume" is all the way up in the "Sounds" preference pane, and I've slid that back and forth too.
    Can anyone suggest a way to reset whatever got confused in the upgrade, and get my alert sounds back?
    I'm on a 13" mid-2009 MacBook Pro, if that matters.
    Thanks!

    I had same exact problem - Reset PRAM and not works fine. I followed instructions here, and step 5 fixed it: http://www.iphonetopics.com/no-sound-after-upgrading-to-os-x-yosemite/

  • Open Dataset for input in BINARY MODE not working after ECC 6.0 upgrade

    Hi All,
    Our requirement is to download an XML file from the application server and there is a customized program to download these files.
    This program uses the statement,  Open dataset ...for input in BINARY MODE
    and it works perfect for 4.7. There were no issues. But, after the upgrade to ECC 6.0 this does not work.
    When the data is read in ECC 6.0 , it is shown in some special characters and it could not be opened with XML editor and the file is not completely downloaded. I read through the forum and tried the following statement as well,
    Open dataset....for input in LEGACY BINARY MODE.
    After this statement, there were no special characters, but there is a blank space introduced before every character.
    Example : TEST(actual)
                      T E S T (After the legacy binary mode)
    Could you please let me know if there is any solution to rectify this problem. Appreciate your help.
    Thanks a million.
    Edited by: Manikd on May 12, 2011 3:52 PM

    But this program was already using BINARY MODE and after upgrade this is not working. I know, it may work in TEXT MODE. However, I cannot change the whole program to TEXT mode now.

  • Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

    Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
    First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
    How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

    Welcome to the Apple discussions.
    First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
    If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

  • X301 Vista FN Keys Sound Keys not working after standby or hibernatio​n

    After the Laptop is waking up from standby mode or hibernation mode some FN Keys, such as Display brightness, F3, F12 are not working. F4 is working. Also the Keybord light is working.
    The Sound Keys sometimes work, sometimes not.
    Any ideas?

    I found in the device manager out that there was a problem with the "Thinkpad PM device". I deinstalled it and restarted the Laptop then it was installed automatically again.
    Now most of the time it works, still not always. It looks like Lenovo needs to do some work on the driver.

  • Sound does not work after sleep

    I'm really tired of this problem. Have a MBP Retina running the most current OS 10.8.4. Every few days or so when I wake the system (after having lid closed for a while, and Chrome browser running) sound does not come back on. So, if I am using youtube I can't hear anything. Only solution I've found is to restart the computer, which of course I don't want to do with browser tabs open, etc. etc.
    Isn't there a simple solution to this, before Apple finally figures out what causes this glitch?

    Finder
    Close all windows and quit all applications.
    Click "Go" menu in the Finder menubar.
    Select Computer, t hen Macintosh HD > Library > Preferences
    Open "Audio" folder.
    Right click these two files and select "Move to Trash".
    com.apple.audio.DevicesSettings.plist
    com.apple.audio.SystemSettings.plist
    Close the windows. Restart the computer.

  • Wecam and USB mic input not working after upgrade to Lion

    The audio inputs (micraphones) all show up in Syetem Preferences but if I talk into the microfones (on USB soundcard/Trust Webcam) no levels are  being shown, I have tried clicking on eatch input it turh but n luck.
    I am getting the impresion Lion broke lots of audio atuff so dont hold up mutch hope for a solution (Except upgrading to Snow Leperd).
    Any ideas,
    Ben

    Beginning with Leopard, Mac OS X supports the so-called UVC web-cameras, you do not need any driver for them. I have just bought a small, pretty and cheap one, Logitech C110.
    My older Genius 1321 is unfortunately unusable from SL onwards, but works with Tiger and Leopard. It is not UVC, and drivers are not available any more.
    conclusion: if your camera is not UVC will not work via ‘plug-and-use’, you need an updated driver, check with the manufacturer. If they do not offer any, buy a UVC one, they are very cheap, but you do not need anything. The one I have just bought works fine, and also has internal mic.

Maybe you are looking for