EDISDEF:Port sid segment defn Z2Q0015000 in idoc type... CIM

Hi Experts,
I am getting the error "EDISDEF:Port <sid> segment defn Z2Q0015000 in idoc type..YHRMD. CIM"
in sm58 of sender sap system. I thought it would be the metadata issue and tried to search the segment 'Z2Q0015000' but unable to find any thing in sender sap.
Even i have tried in idx2. in xi
Please help !!
Regards,
Suresh.

Hi Michal,
Many thanks for your input. The issue is coz the metadata in IDX2 is not updated. The sender system was trying to post the data from the segment which XI doesnt have.
I just tracked the segment from we60 based on the error message and checked the idoc structure in IDX2.Then imported the idoc into IDX2 from sender sap.
once again thanks a lot !!
Regards,
Suresh.

Similar Messages

Port &1 segment defn &2 in IDoc type &3 CIM type &4 do not exist

Hello,
I've a question. We would send an standard IDOC from the 4.6C System to our SAP Xi 3.0. I customized the XI with TA IDX1 and IDX2. If we trigger the IDOC to XI I get the follow error message back:
Port SAPQ73 segment defn E2EDL20002 in IDoc type DELVRY03 CIM type &4 do not exist.
The IDOC Vers. is 4.6. In another system with IDOC Vers. 6.20 isn't a problem. So I think its a problem of the IDOC Version, or? So I checked the forum about this topic but I didn't find anything. So, I hope you can help me. Kind Regards Stephan

Hello,
I have exactly the same issue... We're currently upgrading our SAP system 4.7 to ECC6.0. We're also upgraded the system to an unicode system.
Before those change, the interface between SAP and Xi worked well. Since the upgrade, those idocs don't pass any more and get the same error message than Stephan.
I've checked the authorization of the RFC user and he has SAP_ALL and SAP_NEW. Partner profile, RFC connection, port and distribution model didn't changed.
Do someone have an idea why this can appear ?
Thanks in advance.

Flat File IDOC - ECC, segment defn x in IDoc type y CIM type do not exist

Hi,
I'm working on idoc flat file > sap scenario. Everything seems to be working up until the point where I get an error message:
EDISDEF: Port EDIPORT segment defn E2FINBU000 in IDoc type FIDCCP01 CIM type do not exist
I've loaded the meta data, and the file structure is fine. I believe the issue is related to PI not having the idoc I'm interested in listed in WE30. How do I reference the standard IDOC type FIDCCP01? Ideas I've had are around SWCV or transport from another system, the first I'm not sure which SWCV, the later seems a bit of a bodge and I dont like the idea.
Thanks
James.

Hmm.. some light for the situation. Seems that the segments imported are:
E1FINBU     E2FINBU     31I
E1FINBU     E2FINBU001     40A
E1FINBU     E2FINBU002     40B
E1FINBU     E2FINBU003     45A
E1FINBU     E2FINBU004     45B
E1FINBU     E2FINBU005     46A
E1FINBU     E2FINBU006     46C
Which indeed does not have E2FINBU000, which the IDOC is most definitely trying to pass. I can only guess that the middleware producting this IDOC is flawed, and that standard SAP ALE will accept this as E2FINBU (It works into another SAP system without XI).
Guess I've answered my own question, but feel free to offer light for points
Thanks,
James.

Segment definition in an IDOC type

Hi,
What does Maximum number and Minimum number stand for in an segment definition within an IDOC type? I think there are two options.
1. the occurence number of the segment type in an IDOC type defintion
2. the occurence number of the segment data of a special IDOC
1 or 2. Please suggest ... It will better if there is any example for me to understand it. Thanks.
Regards

Option 2 is correct from my observation.

Adding a segment to a Basic IDOC type

Hi every one,
How do i add a segment that I have created to an existing Basic Idoc type ?.
Can some one give me a solution for this.
Thanks,
Arul.

hi ,
Idoc extension can be done with 4 steps
1. creation of new extension type and a new segment
2. creation of a idoc type
3. link idoc type to message type
4. check the idoc type.
1. creation of new extension type and a new segment
we30--idoc typesobject name-extension type-create-create new-create-place the cursor on the location
2. step:
we30----
3. we82 or we 30
4. WEDI
If you find it useful plz mark the points
Regards,
Naveen

Custom IDoc Type missing segment parent/child relationships

Hi.
I copied the standard ORDERS05 IDoc type to a custom type and cut out quite a few segments. My new IDoc type is setup with parent/child segment relationships, similar to many of the original relationships in ORDERS05.
When I use the standard FM IDOC_OUTPUT_ORDRSP to generate an IDoc, it's not creating with parent/child segment relationships. It's placing the children at the same level as the parent.
Anyone know what I'm doing wrong?
Thanks!
Cal

figured out the problem. was missing a required segment used to establish the parent/child relationship.

Idoc segment for shpmnt notification for idoc type shpmnt02

Hi gurus,
I have to find the idoc segment for shipment notification,idoc type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in advance.

Hi Nagarathinam
You can use transaction WE60 for documentation on IDOCs
Best regards,
Chris

Create Idoc Type under ECC6

Hi folks,
I've created a new Idoc segment for an existing idoc (The original idoc doesn't have the fields I need). I'm now trying to create a new Idoc type taking into consideration the new Idoc Extension I've created. When I type my new idoc type and select 'basic type', I believe I should get prompted (somewhere) to enter the Basic Idoc type and Extension type, but when I create a new basic type, I don't get the option to add my new extension. And If I copy the original basic type, I don't get my new segments.
Can someone please tell me what I'm missing in the create new Idoc Process?
Cheers,
Steve

Hi Stephen..
According to ur Scenario (Adding new Segments to a Basic type ) , you should not create a Basic idoc type . Rather you should create an Extended idoc type in WE30.
That will ask for the Basic type and the new segments can be added here.
This is the Complete info:
1.
IDOC Enhancement
This is the Complete Steps and Info on this...with an Example...
Enhancing ALE
For example, if in an outbound interface you find that the IDOC type does not contain all the data you need to pass to the other system, you can extend the IDOC to accommodate the additional fields and enhance the ALE function modules to populate the fields. Similarly, if in an inbound interface, there is additional data that needs to be posted to the R/3 application, you can extend the IDOC type to have additional fields populated by the external system or translator or the other R/3 system and then enhance the inbound ALE function modules to post the additional data to the R/3 application.
let us use the SAP Customer Master application as an example. Specifically, letâs focus on the IDOC extension and ALE function module enhancement of IDOC type DEBMAS02 and message type DEBMAS (Customer Master) and the IDOC reduction of message type MATMAS.
IDOC EXTENSIONS
Letâs first look at the concept of IDOC extension. SAP delivers Basic IDOC types such as DEBMAS02, MATMAS02, ORDERS02, and WMMBID01. By extending the Basic IDOC type, you are actually creating a new IDOC type. You create a new segment with the additional fields. This new segment has to be associated with one of the existing Basic IDOC segments. Then you create a new extension type, which is associated with the Basic IDOC type. This results in a new IDOC type. In order for ALE function modules to relate to this new IDOC type, the IDOC type is linked to the corresponding message type.
Note that you should not add fields to existing segments but should create a new segment and associate it with an existing segment. This, in a nutshell, is the process of creating IDOC extensions.
In our example, the Basic IDOC type DEBMAS02 is used to communicate Customer Master data to the SAP Customer Master application. Even though the application has a screen to enter and store a contact personâs business address (see Figure 1), DEBMAS02 does not have a segment or fields that communicate the contact personâs business address. If your business requires that this business address be communicated to the other system through the ALE interface for Customer Master, then you have to extend the DEBMAS02 IDOC type, and enhance the corresponding ALE function module.
In DEBMAS02 the contact person fields are present in segment E1KNVKM and the business address of the contact person is stored on the SADR SAP table. You need to create a new segment, Z1SADRX, that is associated with E1KNVKM. This will be done in the process of creating an extension type ZDEBMASX. This extension type will then be associated with a new IDOC type, ZDEBMASZ. IDOC type ZDEBMASZ will be linked to message type DEBMAS for Customer Master. The final step in the IDOC extension process is to check the new objects. This check also verifies the structural integrity of the IDOC type. Letâs look at each of these steps in more detail.
1. Create an Extension Type and a New Segment.
Determine the fields on table SADR that you are going to provide for in the new segment Z1SADRX. You need fields for name, street, city, region, and country to give the business address of the contact person. You also need fields for the address number. ADRNR is a field in SAP tables such as SADR that uniquely identifies the address of an entity. This field is cross-referenced from other tables to the SADR table to obtain the full description of the address. Because this is an IDOC type for master data, the first field of the new segment will be MSGFN. The message function field informs the receiving system of the action to be taken for that particular segment. In the code that you write for populating the new segment, the value of the message function is the same as that of the parent segment E1KNVKM. In all, you will have 12 fields in segment Z1SADRX (see Table 1).
To create an extension type and new segment:
Use transaction WE30 or from WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object Name.
Choose Extension Type.
Click on Create.
You will see a pop-up screen. Choose Create New, and enter a description. For version 4.x, enter DEBMAS02 in the Linked Basic Type field. Enter.
You will see a screen with ZDEBMASX and its description in the first line. Click on this line, and press Create. For version 4.x, expand the tree of segments, and place the cursor on E1KNVKM.
You will see a pop-up screen. Enter E1KNVKM as the reference segment. Enter.
For 4.x, press Create after placing the cursor on segment E1KNVKM.
You will see a line appear with E1KNVKM hierarchically below ZDEBMASX, with a description "Customer Master contact person (KNVK)."
Click on this line and press Create. You will receive a message indicating that the new segment being created will be a child segment of E1KNVKM. Enter. A pop-up box appears for the new segment.
Enter Z1SADRX as the segment type, 1 for Minimum, 1 for Maximum. Leave Mandatory segment unchecked. These entries imply that there is only one Z1SADRX segment for every occurrence of the E1KNVKM segment, and also that this segment is not mandatory. Note that if the parent segment is not mandatory, then the child segment should not be mandatory, because this could result in a syntax error during the creation or processing of the IDOC.
For 4.x, you must first create the IDOC segment Z1SADRX (Iâll explain why in a moment) from the menu path WEDI -> IDOC -> Development -> IDOC Segment.
Click on Segment Editor.
On the next screen, click on Create.
Enter a development class for the object. Enter.
This will take you to the screen for segment definition. Enter a description for the segment. Enter the field name, data element, and the data element documentation name. In most cases, all three fields may have the same values. If you are using a field in the segment that is not present in the ABAP/4 data dictionary, you must first create the domain, data element, field, and appropriate documentation before using it in the new segment.
Enter these three columns for all 12 fields. Save.
Click on Generate/Activate, F3 to step back.
From screen Maintain Segment, go to Segment Type -> Release. A checkbox now appears beside the segment definition Z1SADRX (see Figure 2). Check this box. Save.
Save again to store the descriptions of the segment, F3 to step back.
Save the extension type.
It is possible to have several new segments with relevant Basic IDOC type parent segments in a single extension type. However, you can form only one IDOC type based on a single extension type.
2. Create an IDOC Type.
The next step is to create an IDOC type by associating the extension type that you created with the Basic IDOC type. This is a simple process:
From transaction WE30 or WEDI go to Development -> IDOC Types.
Enter ZDEBMASZ for Object Name.
Click on IDOC Type.
Click on Create.
Enter DEBMAS02 for Basic IDOC type.
Enter ZDEBMASX for extension type.
Enter a description.
Enter.
You will see a display of the composite IDOC type with all segments, including Z1SADRX (see Figure 3).
It is possible to associate only one extension type with a Basic IDOC type for a given IDOC type. However, you can have multiple new segments in an extension type.
3. Link IDOC Type to Message Type.
The next step is to link the new IDOC type to its corresponding message type. This is important, because this relationship is referenced in the partner profile parameters where you specify the message type and IDOC type to be used for that particular representative system. To link the message type:
Use transaction WE82, or from WE30, go to Environment -> IDOC Type / Message Type, or from WEDI go to Development -> IDOC Type -> Environment Î IDOC Type / Message Type.
Click on Display <-> Change.
Click on New Entries.
Enter DEBMAS for message type.
Enter DEBMAS02 for Basic IDOC type.
Enter ZDEBMASX for extension type.
Enter your SAP R/3 release number for Release.
Save.
This data is stored on the EDIMSG table and is accessed by several ALE processes to relate the message type to the IDOC type.
4. Check the IDOC Type.
Before checking the IDOC type for consistency, it is important to perform another step that releases the extension type to the IDOC type:
From WEDI go to Development -> IDOC Types -> Extras -> Release Type, or from transaction WE30 go to Extras -> Release Type.
For the Object Name ZDEBMASX and radio button Extension Type, click Yes.
The extension type has now been "released."
You canât edit the extension type once itâs released. To cancel the release for further editing or deactivation, go to WE30 Î Extras Î Cancel release. The final step in the IDOC extension process is checking the validity of the IDOC type:
From transaction WE30 or WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object name.
Click on Extension Type.
From the Development Object menu select Check.
Repeat the operation for IDOC type ZDEBMASZ.
A check log will be generated for each run with details of correctness or errors (see Figure 4).
In some situations it is possible to receive errors during the check process, especially segment length errors. The incorrect IDOC segment can be repaired and corrected by executing program RSEREPSG. This program checks the formal consistency and repairs incorrect segments. In test mode it will generate a log of formal correctness for the specified segment only. For the program to repair segments in normal mode, the underlying IDOC structures (DDIC structures) must be active. This program rectifies the lengths of the DDIC structures and not the fields themselves. RSEREPSG can also be used to change the person responsible for the object and the release flag.
Menu paths may vary slightly depending on the release/version of SAP R/3, but the procedures and the principles are the same.
ALE FUNCTION MODULE ENHANCEMENTS
Having extended the IDOC type to contain additional fields for an inbound or outbound application, you now want to enhance ALE function modules for populating the additional segment on the outbound or applying the additional segment data on the inbound application.
The core working code for ALE processes for a given application area is always encapsulated in ABAP/4 function modules. These function modules are associated with such control information as message types and process codes. So the ALE process checks this control information and derives the name of the function module to invoke for that particular IDOC processing from certain database tables. These function modules contain objects known as customer functions, which can be considered SAP Enhanced user exits. A function module is called at a particular point during the processing of the main program or function module, and it can be used to influence data processing at that point by adding code to the customer function. The customer function behaves like a normal function module and has import and export parameters, tables (internal tables) statement, and exception processing. Unlike a conventional user exit, customer functions give you the ability to modify only data available to you by the function moduleâs parameters and internal tables. While most ALE/EDI function modules are supported by customer functions, there are ALE/EDI processes that still use conventional user exits. There are a few ways to determine which function module to enhance for a given message type/process code:
For master data distribution, from SALE go to Extensions -> Master data distribution -> Setup additional data for message types. Search for message type DEBMAS in this example. You see an entry for DEBMAS associated with function module MASTERIDOC_CREATE_SMD_DEBMAS. This data is stored on table TBDME. The function module names for all master data message types follow this pattern: MASTERIDOC_CREATE_SMD_messagetype. This function module calls another function module of name MASTERIDOC_CREATE_DEBMAS or MASTERIDOC_CREATE_messagetype. Search for the words customer function, and you find several hits that can be used to add code to the function module.
From WEDI got to Control -> Inbound process codes -> Inbound with ALE service -> Processing by function module (transaction WE42), or from WEDI go to Control -> Outbound process codes -> Outbound with ALE service -> With function module (transaction WE41). There will be function modules associated with the process codes. For inbound, the function modules usually follow this pattern: IDOC_INPUT_messagetype: for example, IDOC_INPUT_CHRMAS for inbound characteristics master.
Use transaction WE57 or from WEDI go to Development -> Message/Application Object. The entries list the function module, Business Object, message type, and IDOC type that are used for inbound ALE/EDI interfaces.
Customer functions are not specific only to ALE and EDI but also to all programs/modules in SAP R/3. Customer function is a SAP enhancement component; the other two types are menu and screen enhancements.
All customer function exits are maintained in SAP enhancements and are found by using transaction SMOD. After executing transaction SMOD, pull down (F4) on the enhancement name field, and execute again. This provides you with a list of all SAP enhancements available. SAP enhancements are grouped by development class pertaining to an application area. Choose Application development R/3 SD master data distribution for development class VSV to lead to a screen that lists VSV00001 as an enhancement (see Figure 5). Press Component +/- to display its function exit components. There are four possible components listed, all of which are function exits (and are function modules) that are called from the ALE function modules in the form Call Customer Function Î001â. This is a special occurrence of the ABAP statement Call. Go to item Exit_SAPLVV01_ 001, which you need to enhance for the Customer Master outbound example of an IDOC extension. In the ALE-function module MASTERIDOC_CREATE_DEBMAS, the statement CALL Customer Function 001 is translated in the background to call component EXIT_SAPLVV01_001. Although this function exit can be edited using transaction SE37, you will use a simpler approach.
When you use SAP enhancements and their components, you manage them with an SAP object known as a project, which is like an envelope containing the selected enhancements and their components. A project can be used to control the execution of components and to transport them to other clients and instances in SAP. Basically, the process involves creating a project, including enhancements and components that are to be enhanced, editing the components, and then activating the project. The following process creates a project for our example Customer Master IDOC extension:
Execute transaction CMOD.
Enter name of project, say CSTMAST1.
Click on Create.
Enter a description of the project.
Save.
Click on SAP Enhancements.
Enter VSV00001 for Enhancement.
Save.
Once youâve created the project, edit the function exit components and activate the project. Remember that the code in the function exit enhancement will execute only if the project is activated. In fact, this is a convenient SAP enhancements feature, whereby the work in progress (developing code in the customer function) will not affect users of that application. When the code is completed, the project can be activated so the enhanced functionality takes effect. It can also be deactivated for maintenance.
As mentioned earlier, customer functions (function exits) are embedded in ALE function modules and can be used to influence the creation and modification of IDOC data on an outbound application or to post additional or modified IDOC data to an inbound R/3 application. Function exits are similar to regular function modules, with import/export parameters, tables (internal tables), and exceptions.
The two important factors to consider while developing the customer function are:
1. The point in the ALE function module where the function exit occurs
2. The data made available by the customer function that can be modified or posted to the R/3 application, based on the direction.
Because some function modules have several customer functions, it is critical to choose the function exit best suited for that particular enhancement. Do not attempt to perform activities that the function exit is not designed for. The importance of this point is illustrated by the following description of enhancing function modules for outbound and inbound ALE interfaces.
Outbound interfaces. In an outbound ALE interface you use function exits (customer functions) to populate additional segments created by an IDOC extension or to modify the existing IDOC data segments as per business requirements. Previously, you identified that enhancement VSV00001 has a component EXIT_SAPLVV01_001 (function exit), which can be used for populating the additional data segment Z1SADRX that you created in the IDOC extension ZDEBMASX (IDOC type ZDEBMASZ, based on Basic IDOC type DEBMAS02). You also learned that the ALE function module that calls this function exit is MASTERIDOC_CREATE_DEBMAS, which has a statement Call Customer Function 001.
Browse the function module MASTERIDOC_CREATE_DEBMAS using transaction SE37. You will find that this customer function is invoked for every segment of IDOC type DEBMAS02. In fact, the function exit is called soon after the creation of an existing segment has been populated with data and appended to the IDOC data table (internal table). Also, the function exit is exporting the message type, IDOC type, and the segment name and is importing the IDOC extension type. It is also passing the IDOC data internal table. This indicates that the ALE function module is allowing you to populate additional segments for every existing segment and modify the existing segmentâs data.
Letâs write ABAP/4 code to accomplish the task of populating IDOC segment Z1SADRX with a contact personâs business address:
From SE37, display function module MASTERIDOC_CREATE_ DEBMAS.
Find Customer Function 001.
Double-click on 001.
The function EXIT_SAPLVV01_001 will be displayed.
Double-click on INCLUDE ZXVSVU01.
You will be asked to create a new include object. Proceed as desired.
Enter code (as in Listing 1).
Be sure to perform a main program check (Function Module -> Check -> main program) and extended program check (Function module -> Check -> Extended check).
Now that you have extended the IDOC and enhanced the ALE function module based on the requirements for the contact personâs business address on the Customer Master, letâs test the interface. You should create a logical system and define a port for this interface. You should also configure the Customer Distribution Model to indicate that message type DEBMAS is being distributed to this logical system. The only difference in configuration between a regular outbound ALE interface and an enhanced one is the partner profile definition. While maintaining the outbound parameters of the partner profile, make sure the IDOC type is ZDEBMASZ. The fields for Basic IDOC type and extension type are automatically populated with DEBMAS02 and ZDEBMASX, respectively.
To maintain the contact personâs business address of a customer:
Use transaction BD12 or from BALE go to Master Data ->Customer -> Send and send that Customer Master record by executing the transaction after filling in the relevant fields such as customer number, message type, and logical system.
Use transaction WE02 or WE05 to verify the IDOC created. You should see the new segment Z1SADRX populated with the correct data.
Reward if Helpful.

Passing header text into Idoc(Idoc type orders05)

Hi,
we have header text, header note etc in text tab(under details) in PO.
now i have to pass the data's from the header text into the IDoc(idoc type Orders05),
In which segment the data's will be populated, How to shall i go.

Hi,
if you are using idoc PORDCR102 or PORDCR101, header texts are populated in E1BPMEPOTEXTHEADER and both position & header in E1BPMEPOTEXT.
Then you are using ORDERS01-05 Idoc types, header texts were filled in E1EDKT1 & E1EDKT2 while texts are filled in E1EDPT1 & E1EDPT2.
The PO header texts are stored in the segments E1EDKT1 whose child segment is E1EDKT2 in IDoc type ORDERS05.
The actual text will be found in E1EDKT2 and the text id will be found in E1EDKT1.
You have to do some config so that The segment gets update
in the IDoc.
go to SPRO MM->Purchasing ->messages->Text for messages->Define texts for PO. Here you can find out on the left side of the window.In Header texts & supplements text.
Add the text IDF01( with all details like your document type, object for PO will be EKKO) in header text .
Then Add all other to the supplement texts(details).
It is now the IDoc should update the segments.
Regards
Raj.
Moderator message:
Warning. Reason: plagiarism, this is a copy-paste answer from:
PO texts in purchase order idoc*
Edited by: Csaba Szommer on Nov 8, 2011 2:00 PM

IDOC type to send OPEN ITEMS per INVOICE to external system?

Dear EDI Experts,
we want to send OPEN ITEMS of a customer per document via EDI to an XML file.
We checked on idoc type CRESTA01 but this idoc type provides "only" the total OPEN ITEMS of a customer but NOT e.g the invoice document numbers.
Is there any way to generate an IDOC or XML file with the invoice numbers and its OPEN ITEM amounts?
We want to transfer that data to an HH device in order to show customer which invoices yet to be paid.
Any idea?
Many, many thanks
Regards
JW

Hello,
many thanks for the quick answer to my question.
We want ONE credit idoc per one customer showing all OPEN ITEMS with the document number.
That info is sent to the Handheld in order to provide customer exact info which invoice he has not paid yet.
We do not need ONE idoc per ONE document.
But it seems no standard idoc provides such info and we have to call a FM to provide that info to a Z-Segement of CRESTA01. Is that correct?
Port definition XML in we21 for idoc type is understood.
Thanks a lot
Regards
JW

How to see an IDOC type & FM, "WHERE USED LIST"?

Hi Experts,
I nned to create an IDOC of WMTCID01 and message type is WMTOCO.
I wanna to see that, Where Where this IDOC was used(especially, in "Z" objects) so that, I can get some idea abt. it and do my coding.
So, let me know that, How to see this IDOC & FM, "WHERE USED LIST"
thanq

hi go to the tcode...
1) Create Segment ( WE31)
2) Create Idoc Type ( WE30)
3) Create Message Type ( WE81)
4) Assign Idoc Type to Message Type ( WE82)
Tcode- we19 is for testing idoc
in the we42 the message type and the idoc function module is ataached by the process code..
this is a best example to understand the creation of idocs(z)..
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm

Extension of generated Idocs types

hello,
does anybody knows why I can not create extension of generated (means in table EDBAS-GENERATED = 'X') idocs?
I tried to extend idoc BATMAS03 on R/3 Ecc 6 and got message:
message e099(b1) with
'Action is not possible for generated idoctypes'
In former version of R/3 4.6C it was possible to extend such IDoc BATMAS02 (generated one) without any problems.
Of course I found in program MSED5F02 in routine CREATE_EXT_STRUCTURE new (in comparison to 4.6C) extra check which protects against extension of generated IDocs, but I want to get to know what was behind that decision or how to workaround that problem.
Thanks in advance,
Marcin

Hi,
User Exits are used to populate data in new segments added and to read them
back which provides extension to existing idocs.
IDOC EXTENSIONS
SAP delivers Basic IDOC types such as DEBMAS02, MATMAS02, ORDERS02, and WMMBID01. By extending the Basic IDOC type, you are actually creating a new IDOC type. You create a new segment with the additional fields. This new segment has to be associated with one of the existing Basic IDOC segments. Then you create a new extension type, which is associated with the Basic IDOC type. This results in a new IDOC type. In order for ALE function modules to relate to this new IDOC type, the IDOC type is linked to the corresponding message type. Note that you should not add fields to existing segments but should create a new segment and associate it with an existing segment. This, in a nutshell, is the process of creating IDOC extensions.
In our example, the Basic IDOC type DEBMAS02 is used to communicate Customer Master data to the SAP Customer Master application. Even though the application has a screen to enter and store a contact personâs business address (see Figure 1), DEBMAS02 does not have a segment or fields that communicate the contact personâs business address. If your business requires that this business address be communicated to the other system through the ALE interface for Customer Master, then you have to extend the DEBMAS02 IDOC type, and enhance the corresponding ALE function module.
In DEBMAS02 the contact person fields are present in segment E1KNVKM and the business address of the contact person is stored on the SADR SAP table. You need to create a new segment, Z1SADRX, that is associated with E1KNVKM. This will be done in the process of creating an extension type ZDEBMASX. This extension type will then be associated with a new IDOC type, ZDEBMASZ. IDOC type ZDEBMASZ will be linked to message type DEBMAS for Customer Master. The final step in the IDOC extension process is to check the new objects. This check also verifies the structural integrity of the IDOC type. Letâs look at each of these steps in more detail.
1. Create an Extension Type and a New Segment.
First, determine the fields on table SADR that you are going to provide for in the new segment Z1SADRX. You need fields for name, street, city, region, and country to give the business address of the contact person. You also need fields for the address number. ADRNR is a field in SAP tables such as SADR that uniquely identifies the address of an entity. This field is cross-referenced from other tables to the SADR table to obtain the full description of the address. Because this is an IDOC type for master data, the first field of the new segment will be MSGFN. The message function field informs the receiving system of the action to be taken for that particular segment. In the code that you write for populating the new segment, the value of the message function is the same as that of the parent segment E1KNVKM. In all, you will have 12 fields in segment Z1SADRX (see Table 1).
To create an extension type and new segment:
Use transaction WE30 or from WEDI go to Development -> IDOC types.
Enter ZDEBMASX for Object Name.
Choose Extension Type.
Click on Create.
You will see a pop-up screen. Choose Create New, and enter a description. For version 4.x, enter DEBMAS02 in the Linked Basic Type field. Enter.
You will see a screen with ZDEBMASX and its description in the first line. Click on this line, and press Create. For version 4.x, expand the tree of segments, and place the cursor on E1KNVKM.
You will see a pop-up screen. Enter E1KNVKM as the reference segment. Enter.
For 4.x, press Create after placing the cursor on segment E1KNVKM.
You will see a line appear with E1KNVKM hierarchically below ZDEBMASX, with a description "Customer Master contact person (KNVK)."
Click on this line and press Create. You will receive a message indicating that the new segment being created will be a child segment of E1KNVKM. Enter. A pop-up box appears for the new segment.
Enter Z1SADRX as the segment type, 1 for Minimum, 1 for Maximum. Leave Mandatory segment unchecked. These entries imply that there is only one Z1SADRX segment for every occurrence of the E1KNVKM segment, and also that this segment is not mandatory. Note that if the parent segment is not mandatory, then the child segment should not be mandatory, because this could result in a syntax error during the creation or processing of the IDOC.
For 4.x, you must first create the IDOC segment Z1SADRX (Iâll explain why in a moment) from the menu path WEDI -> IDOC -> Development -> IDOC Segment.
Click on Segment Editor.
On the next screen, click on Create.
Enter a development class for the object. Enter.
This will take you to the screen for segment definition. Enter a description for the segment. Enter the field name, data element, and the data element documentation name. In most cases, all three fields may have the same values. If you are using a field in the segment that is not present in the ABAP/4 data dictionary, you must first create the domain, data element, field, and appropriate documentation before using it in the new segment.
Enter these three columns for all 12 fields. Save.
Click on Generate/Activate, F3 to step back.
From screen Maintain Segment, go to Segment Type -> Release. A checkbox now appears beside the segment definition Z1SADRX (see Figure 2). Check this box. Save. Save again to store the descriptions of the segment, F3 to step back.
Save the extension type.
It is possible to have several new segments with relevant Basic IDOC type parent segments in a single extension type. However, you can form only one IDOC type based on a single extension type.
Pls reward helpful points.
Regards,
Ameet

Error: Metadata EDISDEF for port SAPEC1, IDoc typ

I am getting following error in my File-2-IDOC scenario.
Could anyone please help me out?
<b>Error: Metadata EDISDEF for port SAPEC1, IDoc typ
CREMAS04 and CIM type not maintained</b>
I defined RFC Destination and Port properly..
Did I miss out anything.
Thanks in advance for the help.
Venu

Hi,
A few checks to be done,
1. GO to the RFC destination 9in SM59 and see if the Remote Log on and Test COnnectiivyt to the R# system works.
2. Go to IDX2 and deleted the exisitng Metadata and import the same meta data manually. IS the import succesful?
3. Check if you have entered valid POrt value and RFC destintion in IDOC adapter.
Regards,
Bhavesh

How to add an feild to a segment to an existing idoc sturucture?

how to add an feild to a segment to an existing idoc sturucture?
please help me out with the step step by process...
thnaks and regards,
anu

Hi
use the WE31 Tcode to edit the segment
see the following steps
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
>>>> SAP ALE & IDOC<<<<
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Regards
Anji

Populating a segment in the target idoc based on dif

Hi
We have E1MARCM, E1MBEWM and ZE1MARCM (constum segment) in the material IDOC and we map the idoc to similar idoc which has same sement in the target idoc material idoc.
ZE1MARCM segment is the custom segment and is the subsegment of E1MARCM. while populating the target idoc segment, we are taking the values from E1MBEWM segment and populting in ZE1MARCM, but the problem is as ZE1MARCM doesnt get populated unless E1MARCM gets populated in the source, So, we need to manually populate E1MARCM in the target message with some default valaues incase we dont have E1MARCM coming in the source. Just would like to know what is the effort in the XI side. Is it a good design to implement this in XI or should we change the ABAP in the ERP side to always populate the E1MARCM on the source idoc which is a standard idoc.

we need to manually populate E1MARCM in the target message with some default valaues incase we dont have E1MARCM coming in the source.
Use mapWithDefault std function or ifelse function in PI. It solves your issue.
Is it a good design to implement this in XI or should we change the ABAP in the ERP side to always populate the E1MARCM on the source idoc which is a standard idoc.
It anyways dont take much effort in doing so in XI. If you can do so in ABAP, even that would be fine.
Regards,
Swetha

EDISDEF:Port sid segment defn Z2Q0015000 in idoc type... CIM

Similar Messages

Maybe you are looking for