Edit attached audio with movie clip
I made a project by combining movie from one camera (with audio muted), plus audio only from a second camera as an attached audio track. The two cameras were recording the same scene, so the (better quality) attached audio can be put in sync with the video from the other camera.
How then can I delete a section of the video AND the corresponding section from the attached audio channel, so the remaining audio remains in sync?
"Split Clip" splits the movie but not the attached audio. Is there a way round this?
Sorry I never posted back about this. I got sidetracked with putting together a different vacation video and forgot all about it.
Anyway, what I posted before totally worked. I exported the movie as an mp4 at full quality (I'm not sure if there was any loss of quality, as the footage I started with was not very high resolution. There was no discernible loss of quality, though). Then I took that newly created mp4 and re-imported it into iMovie.
iMovie treated the audio that had previously been pinned as embedded audio, so now when I cut a clip, it cuts the audio with it.
Kind of a pain to do the extra step (especially since importing all of my raw, unedited footage and re-importing it took a while, but working with it now is soooo much easier.
Hope this helps anyone who may stumble onto this thread in the future.
Similar Messages
-
In Premiere I can edit an avi or mov clip but I can not save tghe result as a like file. What do I have to do??? It only saves a project. Under 'File' the 'Export' function is greyed out. I need help baddly.
[email protected]
Bill SchoonBoatbuilder
Let us start from the beginning.
It has been established that you have Premiere Elements 10. On what computer operating system is it running?
There has not been a File Menu/Export/Movie export opportunitity in Premiere Elements since version 7. We are not up to version 12.
For Premiere Elements 10, your export opportunities are all in Share/ including one for Computer. Under Computer there are several choices. The ones that you see are Adobe Flash Video, MPEG, and AVCHD. The others you have to scroll down to. And those choices are AVI, Windows Media, QuickTime, Image, and Audio. You do not have to use the scroll bar for this. You can click on Adobe Flash Video panel to get it to turn black. Then use the down arrow to go down the list and the up arrow to go up the list. Once you get to a category, you can select a preset and go with it or customize it under the Advanced Button/Video Tab and Audio Tab of the preset.
If you post the properties of your source media that you want to try to match in the export, I would be glad to suggest the exact settings for you.
We will be watching for your follow up with details.
Thank you.
ATR
Add On...The Premiere Elements 10 File Menu is for more than Saving, just not exporting. One of the key features that can be access there is the Project Archiver. More on that another time. -
I'm making an animation with movie clips inside the stage but if i put action in the end of these for go to another frame in the stage, dosnt let me because AS3.0 does'nt alow script inside buttons and MC's.
Wath can i do for this issue.
The new code from AS3.0 is so diferent to AS2
Thanks for your time.
can you put some video to do things like this.????
By the way, this forum is the best, congratulations for all.Thank you for the answer, i hope to understand AS3 more in the pass of days.
For other hand, can you tell me how can i make the background of my exported video transparent??
When export i mark the check box make alfa chanel on backgroud, but when i conver to FLV with Adobe Media Encoder, the background turns to black.
what other way can i use to import video.
Thank you any way -
How can I put a slideshow on automatic with movie clips longer than 2 minutes?
How can I put a slideshow on "automatic" with movie clips that are longer than 2 minutes?
Inspector > Animate > start transition to Automatically and set the delay to the duration of the video clip.
-
Editing FCE audio with Garage Band?
I've never tried to edit FCE audio with anything except FCE itself and SoundSoap. Can Garage Band edit FCE audio without messing up the video? I seem to recall trying to edit FCE audio with Audacity once, but lost the video information when I saved the edit. I never tried it again. It would be nice to be able to cut and past a bit of ambient room noise to cover some unwanted audio.
Ross Hunter
Orange, VAMartin,
I thought I'd tried that before and was not successful. I'll try again. And I'll resolve to be more persistent and not give up at the first obstacle.
I recall seeing a tutorial of SoundTrack Pro where you could copy and replace a bit of audio. I suppose that's too much to ask of FCE or the now departed SoundTrack?
Ross Hunter
Orange, VA -
Is it possible to attach audio to a clip? Like the opposite of "detach" audio.
Newbie here.
I took an audio track from a video and edited it outside of FCPX. Now I want to drop it back into my projet and replace the clip's audio with the imrpoved audio track.
I know it's possible to deatch audio, but can I merge it to the clip so it doesn't become mis-matched when I'm editing? Thanks.Just drag it and place it under the clip.
It will stick to the clip wherever you move it.
Alternatively select the clip and audio and make them into a Compound Clip.
Message was edited by: Ian R. Brown -
Hi,
My video camera produces .mts files - avchd.
Wanting a good editor I downloaded a Trial version of Premiere Pro CC , BUT no matter
what I tried - including many suggestions from on line users- could not get audio with any
of my clips. Prelude was able to "ingest" the clips with audio BUT whenever I exported them to PP
they were unrecognizable by PP.
Cannot seem to get any definite answer from any authority in Adobe. Is this problem insoluble?
I would like to buy into PP CC but not if it cannot handle the files my Panasonic camcorder produces
whats the point? Also transcoding .mts files into another format ( which works with PP ! ) reduces the
quality and is not acceptable.
Anybody know the answer?
( Win 7 (64) ; Intel i7 920 )Audio is at times the bane of the video editing side of things. There's been holy Hades raised here at times over the way PrPro does ... or really, doesn't ... handle "extended" audio channels as they would seem to be logically best handled. And the comments that some other programs handle X part of this easier. At which point there's oft a comment that yea, that be the case but that other program handles Y part of the audio process like a truly crashed turkey.
It seems to me the point is that perhaps none of the editing apps are where they should be for treating the audio part as seriously as the video. There've been comments and blogs from Adobe that this is why they have Audition, to handle all the audio stuff. But to many of us the way that Audition & PrPro work is not as "transparent" as we need it to be. Audition normally overwrites original files unless you purposely save-as. PrPro never over-writes original footage files. A few people have been caught by trying something in Audition ... without save-as-ing, and unfortunately without proper back-up, and ruined their audio. With no way back. Unfortunate, but in the differences in the two program's methodology, this is bound to happen at some time to almost anyone. "You should have known what you were doing before you did it" ... yea, true ... but in a hurry under deadlines, well ... baaaad things happen. Especially when one gets used to a HUGE "feature" of the Adobe video apps: non-destructive editing. Oh, sorry, Audition is a wee bit different. People need to know that!
And ... yea, setting up PrPro for 5.1 or 7.1 is entirely possible ... IF you know exactly what to set in preferences (which is not explained clearly for those who aren't already knowledgeable) AND how to move things about on your tracks in a sequence. So some of the experienced people feel it's not THAT hard a deal ... deal with it and move on. For noobs to the scheme of this, it can be completely un-penetrable.
Hope you get this nailed ... and there are some wonderful people around here that know those settings and when they do pop in can give so much help ...
Neil -
Flash Newbie needs help with Movie Clips/Action Scripting
Hi -
I'm having a problem with my movie clips playing
simultaneously and cannot, for the life of me, figure out what I
have done wrong. I'm new to flash, so I may have set something up
incorrectly, but here's what I have so far:
11 layers, total: 1 layer with 10 control buttons, each
button with the following actionscript:
on (release) {
gotoAndPlay(85);
Where the number changes in relation to which keyframe the
next movie is on.
I have 10 movies, total, but they are only movie clips,
essentially photo slide shows with audio, made all in the library.
The problem happens when I click on the second or third
button. Not only does the movie that I have selected begin to play,
but all of the previous clips do as well, so it all sounds quite
garbled. I don't know what I am missing in the action script, as my
Action Layer has a stop command on it at each keyframe where there
is a new clip to play.
I have tried to add a stopAllSounds command, but I'm afraid
that doesn't do anything because it is not a "sound file" per se,
playing in the timeline.
I'm at the end of my rope and really need some help in
figuring this one out. My project is hanging in the balance on
this, as I have scripted everything else correctly and it runs
beautifully.
Please help!
Thanks,
CarolineEach layer has a blank keyframe before and after each
movieclip. Each movie clip is at a different frame. Even with the
blank keyframes added, the second video starts to play and then the
first video begins to play. Same happens if I click on the third
button. Third plays, and starts 1st and 2nd shortly thereafter. Is
there an action script I can put in that will tell the timeline
that, when a button is clicked, no matter where the movieclip is,
it will stop and start the newly selected movieclip? -
Hi -
I'm having a problem with my movie clips playing
simultaneously and cannot, for the life of me, figure out what I
have done wrong. I'm new to flash, so I may have set something up
incorrectly, but here's what I have so far:
11 layers, total: 1 layer with 10 control buttons, each
button with the following actionscript:
on (release) {
gotoAndPlay(85);
Where the number changes in relation to which keyframe the
next movie is on.
I have 10 movies, total, but they are only movie clips,
essentially photo slide shows with audio, made all in the library.
The problem happens when I click on a the second or third
button. Not only does the movie that I have selected begin to play,
but all of the previous clips do as well, so it all sounds quite
garbled. I don't know what I am missing in the action script, as my
Action Layer has a stop command on it at each keyframe where there
is a new clip to play.
I have tried to add a stopAllSounds command, but I'm afraid
that doesn't do anything because it is not a "sound file" per se,
playing in the timeline.
I'm at the end of my rope and really need some help in
figuring this one out. My project is hanging in the balance on
this, as I have scripted everything else correctly and it runs
beautifully.
Please help!
Thanks,
CarolineThey do not have to be on the same layer, but they should not
exist on the timeline for the entire movie, just where they are
necessary.
Lets say you have three movieclips ten frames apart on the
timeline. Mc1 (movieclip1) is on frame 1, Mc2 is on frame 11, and
Mc3 is on frame 21. Mc1 should only be on the timeline from frame
1-10, then it should not exist on frame 11. This way if you jump to
frame 11 only Mc2 will play, because Mc1 isn't on the timeline
anymore.
They do not have to be on the same layer.
It may help if you email me the file. My address is on my
name on the lefthand side of this forum post. -
Disturbed Audio with long clips and speed changes.
Hello,
I experienced a strange problem in FinalCut Pro (v 6 and 7).
-I capture a clip with a Blackmagic Decklink or a DVS Pronto as Uncompressed Quicktime, 720p50 via HD-SDI with embedded audio. The clip is about 10 minutes long.
-I speed down the clip at 36% by changing the clip's speed in the sequence.
When I render the audio track, I get completely distorted audio after some minutes until the clip's end.
The problem doesn't seem to occur when I put the clip in a sequence and nest that sequence into a second one and change the nested sequence's speed.
Is that a known bug? Did anyone out there experience the same problem? Is there any technical explanation and solution?
Message was edited by: weisseruebeBoth Picture Safe and Title Safe are guidelines. They were developed to ensure that titles and pictures placed within these guides would be viewable on most televisions.
In the same way that no two tv's will look the same with regard to colour, there can also be a great difference in overall picture placement on the screen. Keeping titles within the safe area will help ensure that even the most poorly calibrated set will still show the entire title.
You can't convert the MP4s because you do not own the right to use them.
As for the MP3's, time to do some work and look it up. The Search function here is a great resource.
rh -
Editable text inside draggable movie clip
I am dinamically creating textfields inside movie clips.
Those movie clips are all dragabble (startDrag).
The problem is that those textfields are supposed to be
editable (input type) but once I attach startDrag to them, it's
impossible for them to get the focus, hence they are not editable.
I tried manually setting the focus on release, but it didn't work
(Selection.setFocus(_root.movieclip.textfield)).
Any help will be rrrrreally appreciated :DWell there does have to be some pixels in the bg clip! (Got
to tease you just a bit, because I run into this ALL the time.)
Some how folks don't take the method at its word.
createEmptyMovieClip() does just that. It creates and empty movie
clip. There are no pixels in it so there is nothing to onPress.
Also I've got a little trick for you – you didn't ask
for it, but it is still free. :)
If you use the MovieClip class' method for
createEmptyMovieClip() it will return a reference to the newly
create clip. You can assign that reference to a variable and use it
again and again. To my eye it makes the code easier to read and
maintain. So your code would change to something like:
var curClip=this.createEmptyMovieClip("mc"+i,1000+i);
curClip.createEmptyMovieClip("bg",100);
curClip.createTextField("myText",2,20,20,"auto","auto");
curClip.myText.text="default value";
curClip.bg.onPress=function(){
this._parent.startDrag();
and so on.
Also I personally think getNextHighestDepth() is a disaster
waiting to happen so I personally never use it. -
Attaching an embedded movie clip to an empty one
HI,
I am new to Flash and would like some help about the
following. A have an embeded movie clip in my library that i want
to attach to an empty movie clip I am creating with ActionScript. I
want to fix the size of the empty movie clip, that I will use as a
container to for my embedded movie clip. It turns out that when I
fix the size of the empty movie clip container and I use
attachMovie to load the embedded movie clip to it, the image
doesn't show, I can hear the sound but not the image.
So the question is , if I have a movie clip container of a
different size than the movie clipse I want to load into it, what
do I need to do to make sure the movie clip will fit into the empty
container.
thanks
-malenaThanks for the answer, but what I would like to do is to have
a FIXED size empty clip on the stage and be able to load new clips
into that empty clip and have the loaded clips resize to fit into
the empty clip.
For example the FLVPlayback component does that
automatically. I can't use the FLVPlayback component because I want
to be able to control which frame number I want to displaly on the
screen, and it looks like I can only have that type of frame level
control wiht a Movie clip component but not with the FLVPlayback
component.
-malena -
Problems with movie clips in time line-program keeps quiting
Not sure if I love this new iMovie version. I have imported many clips with my Sony Digital Hi 8. No problem with past versions. Everything went good until trying to put the clips into the time line. Everytime I try working with the time line and the imported movie clips the program quits...every time. Is this normal. Its getting pretty frusterating.
Thanks for any help.
ShaneI feel your pain in that the same things are happening to us. My wife is trying to edit many video clips imported from a Panasonic PV - GS39. iMovie crashes constantly when trying to work with this particular project. I have successfully edited a project that consisted of mainly still pics with only a few short video clips thrown in. I've tried many of the suggestions from this discussion group (QT plugs, trashing prefs, etc...) with no success. I'll keep trying for a solution though.
-
How do I/can I create a slideshow button but within the slideshow drag in some short movie clips?
Hi NototiousIG - and welcome from me as well!
What you want to do is not that hard.
I would suggest that you make the slide show, with the video in the middle, a seperate chapter. That will give you a Chapter Button in iDVDs sub-menu, which of course you can call what you like.
The audio can be imported from iTunes. If it is from your own CD, then convert (save) that track as an AIFF file before import (saves i bit of rendering time). If purchased from iTunes Store, you may find you have to burn it to a CD and re-import it to iTunes before it will import into iMovie.
When it comes to burning the finished DVD, you may find that the rendering of audio takes longer than anything else. This is normal - don't panic, do not shut down iDVD in desperation, and do not have any other application running at the time.
One last word of advice: be careful what transitions you chose between a still photo and the video. A bit of experimentation goes a long way!
Post back if you need more help. -
IPad - with movie clips - how can I play more than one at a time?
iPad2. I post short movie clips via iTunes to the Photo catagory. I can play each of these clips by selecting the clip and pressing the start arrow, only the selected clip will play. How can I select a group of movie clips and have them play with only one selection. Like a "slide show" but for movie clips???
More than one contacts at a time
Maybe you are looking for
-
I am trying to sync my calendar between the mac and my iphone now that I have upgraded to Mavericks. I understand that I have to use iCloud (which I am not at all excited about) but I'll be damned if I can find out how to do it. I've read several po
-
I recently purchased a Belkin Y audio cable for my Zen Vision M and connected it to my home surround sound receiver. As soon as I connected it, the music started playing but the screen went off. Does anyone know how to keep the screen on when connect
-
Problems with SNMP examples in WL documentation
I am using WL 5.1 on NT. Tried to follow SNMP use examples shown in WL documentaion. Command line examples refuse to work- I either get an error that ...Remote Host Unknown... or ...Errored Object ID... 1. after many iterrations launched SNMP agent w
-
Need 11gr2 RAC install Guide on Solaris 10 x86 using containers and NFS
I'm looking for an 11gr2 RAC install Guide on Solaris 10 x86 using 2-3 containers. I need to have the NFS server reside in the global zone or on a 3rd container visable to the two rac containers. Please share me installation guide! Thank you! PS - I
-
Open differents subvis on own main vi.... is it possible?
Hi Guys, I have a litle dude. I have a very good application and works well, i have main vi, it takes differents bottoms to open subvis with differents options or applications, but the problem is when i do the executable file, on xp open 2 files on