Edit contact information in hotmail.

When I click on my name as a sender or recipient in hotmail all of my personal contact information is visible including my birth date. I have clicked edit but it won't allow me to remove my birthdate. Can anyone tell me how to do this? Is this information available to everyone I send an email too?

Dear Praveen,
Thanks for the information. I have been looking around for the options in configtool and user adminstration with in portal, but never realised we need to go to user management from index.html
Thanks again and points are alloted.
Regards,
Sreeram

Similar Messages

  • Applescript to batch edit contact information

    I am using Contacts to manage my addresses. Till not I was using the "Department" field and the "Notes" field to enter Notes to all my Contacts. However, my new Phone does not support syncronizing the "Department" field and I need that information on my phone.
    Can someone help me with a script that will add the Information from the "Department" field to a separate line to the "Notes" field?

    tell application "Contacts"
              repeat with aperson in people of group "group name"
                        if department of aperson is not missing value then
                                  set theDept to department of aperson
                                  set the note of aperson to note of aperson & return & theDept
      -- the next line is optional. Remove it if you don't want to delete the department field
                                  set department of aperson to missing value
                        end if
              end repeat
      save
    end tell
    As stated in the comment, remove the "set department" line if you don't want to delete the department field, just move it.
    Edit the group name as appropriate, or for all contacts, remove [of group "group name"]

  • Editing imported CSV contact information?

    Hello, I have been searching everywhere and cannot find an answer, my guess is that Skype isn't smart enough to do this but figured I would ask...
    I am able to edit contacts that were added from Facebook and those that I have found through Skype, that is not my issue. My issue is that I have imported my contacts as a CSV file from my address book and those contacts, I cannot edit. When I right click on a name of a facebook contact it give me the option to View Profile and then Add Phone Number. If I right click a CSV added contact I can View Profile but CANNOT ADD PHONE NUMBER. 
    I am using the latest version 7.4.0.102, just checked the update. Any suggestions? All I want to do is edit/add  numbers to contacts. It would also be nice to delete some of the contacts as well (I can delete those that are facebook contacts)... 

    I have tried that, however, as it is not a song that I downloaded with iTunes (I had it in my music folder on my C: drive), the area is blocked out in grey so does not allow me to edit the information.
    Any other ideas I could try?

  • How to ereas all contacts information as well as calenda information?

    hi, i want to erase all contact and calenda information in my i-phone, appr. 900 total. what should i do? btw, i tried to use erese all option in system setting menu. but it took >2 h while nothing happened in my screen. thx

    iCloud will only sync contacts in the iCloud group.  You will have to move or copy your Hotmail contacs to the iCloud groups to upload them to your iCloud account.  You can do this in a contact management program on your computer such as Outlook, or you can try an app (speed names, multi-edit contacts manager, ABContacts, etc.).

  • [BUG] Editing contacts with italian language set

    This behaviors happens only when WebOS is set to Italian language:
    1) when editing an existing contact, it shows up as a blank one, as if I was creating a new contact from scratch. Actually, the contact data is there, but somehow hidden! When changing it (so, actually, writing back from scratch), it does change, but can't see the original contents.
    2) When creating a new contact, I can't add a phone number, while I can add other items (email, address, URL, etc). Saving it and then editing it, goes back to point 1. Thus, the only way to save a phone number is dialing it, then saving it from the Phone app.
    I have an European GSM Pre, WebOS 1.4.1

    First, when you do create a new contact (in Italian), what happens when you try to type in the Phone Number field? Does the cursor appear, or is the field grayed out? Does nothing happen when you tap on the "+ New Phone Number ..." field?
    As long as I tap it, the field become dark grey, as it was somehow activated, but when I release my finger it comes back to normal and I can't type in it (no cursor).
    Besides that, I can add a new contact. Other fields are working fine, but in the Email address and IM address field, the cursor doesn't appear on the very left (beginning) of the field. It stays almost in the middle, as it's keeping room for a button, and actually if I click on the left, it pops up something like an empty list or menu. Besides this glitch, I can edit those fields.
    By the way, the phone number field is the only one that is 2 lines long (in italian). I don't know if this means something, but maybe this screws the interface up.....
    Second, what happens if you change your language selection from Italian to English, then try to edit an existing contact? Are you able to see existing text then?
    Yes; it works perfectly.
    Also, try creating a new contact with your language selection set to English. Are you able to enter a phone number at that point? How about editing a contact created with language set to English while still set to English. Can you see existing data within the contact editing screen?
    Yes, everything works fine, as long as english (US) language is set.
    Next, switch back to Italian and view the contact created under English. Can you edit existing information without it blanking out?
    I can't see the existing information; I can't edit any phone number obviously, because the field can't be activated. If I try to overwrite data by writing on those field that I know they contain data, it doesn't work: name of the contact doesn't change, and editing the email address (ie. writing it back from scratch) adds another address.
    Hope this helps,
    Stefano

  • No picture on contacts imported from Hotmail in iPhone 5

    Hello
    I'm new owner of iPhone 5 and I love it, but althought i have some question, basically my question now is, why the picture of my contacts from Hotmail are not imported?
    I can see that the contacts are sync'ed both way so i like that, BUT some extra information is not imported like the Picture and if I "LINK" 2 contacts in my Hotmail (llike contact + skype + facebok) the extra infromation is not imported either.
    Anyone has any idea how to import at least the pictures?
    Thanks

    Hi,
    Try turning the music off in the slideshow (Select: Music icon in bottom right of window, unselect play music during slideshow).
    Export the slideshow again (sorry)
    Add your play list for the slide show to your ipod.
    Add new slide show to your ipod
    On ipod go to: Photos:Slideshow settings: Music: select your playlist from the list.
    The music should play when you statr your slideshow.
    Hope this helps!

  • Not able to add nor edit contact

    Hello,
    I am not able to add nor edit contact in my handset (BB Curve, 8520). I am able to only delete contacts. Anyone please help to troubleshoot this problem. Thank you
    regards. Harris
    Solved!
    Go to Solution.

    If you have Yahoo! Messenger, Hotmail Messenger or AIM Messenger, uninstall all of them, the problem will be solve...

  • Editing Contacts via keypad causes OPERATION FAILE...

    Initially I entered info for approximately 60 contacts into my new Nokia 6131 phone memory using the phone keypad. Everything worked fine. Then I discovered the CONTACTS application in Nokia PC Suite software was a lot easier to use for data input, so I started to use that application via my PC to edit my contacts.
    Now, when I try to edit a contact using the phone keypad, I regularly get the OPERATION FAILED error, which prevents saving the revised contact information. This is EXTREMELY frustrating, because there is no indication of a cause for the error. 95 percent of the memory in my phone is free, so problem is not related to memory capacity. I can delete certain parts of contact info, like an extra phone number, or an image, and that seems to work without generating the error, but you cannot add or modify anything. I can only reliably edit my contacts using PC suite and then synchronizing the changes. I have updated PC suite and the phone firmware to the latest available versions, but that didn't help. DOES anyone know what causes this OPERATION FAILED error?

    Thank you miksu,
    Yes, my phone UI is idle when I try to browse/edit contacts. Today, I thought I'd try resetting factory settings and see if that cleared the problem. So I backed up the phone, reset factory settings and tried to restore from the backup - disaster, it would not restore contacts at all and I was left with a phone minus 400+ contacts! I tried backups that I had previously restored successfully from - still no go.
    So I rebuild the contacts from my Outlook, compared it manually with what I had on my old 6230 (fortunately I still have the phone with contacts intact), made updates manually and all is now OK. The OPERATION FAILED does not appear on the phone and I can browse/edit my contacts on the PC.
    Although everything is fine now, I will use PC Suite with caution. Perhaps my understanding of the product is not good enough, but I am not keen on risking it.
    Sharad

  • No New Contact Information

    Brief History:
    1. First sync with iBook went fine, everything synced.
    2. Edited AddressBook information.
    3. Synced again, says it synced contacts, no information on Touch wasn't updated.
    4. Noticed that iTunes wasn't pulling updated groups for the iPod Touch options (as in, which groups to sync and what group to put contacts into when created on the Touch)
    5. Thoroughly stumped.
    6. Any ideas? I bought this as a PDA (only need calendar and contacts) so I am pretty desperate to get the contacts working.
    I am running the most up to date of everything (10.5.2., latest iTunes, latest Touch software).
    Message was edited by: Elkanah

    Hello, and Welcome to Apple Discussions!
    In the info pane for your iPod, make sure that syncing contacts is actually enabled.
    Hope this helps.

  • Find my friends contact information

    In Find My Friends I was presented with a button to add contact information. Unfortunately I selected the wrong contact. Now the name shown is incorrect but I see no way to edit or change it.

    I have the same problem except that all my contact locations shows up in either Korean or Japanese. I think this started to happen after a business trip to Shanghai. Now friends see my location in a foregin language instead of English. I have no idea were to reset it.

  • Where is Active Sync finding all my contact information

    No device
    I recently acquired a Palm Treo Pro, to replace my Treo 650. I have quite a few contacts stored on my 650 Treo, but they don't show up in my Outlook Contacts, and I have never been able to see any contacts in my Palm Desktop Address book. Anyhow, when I ran Active Sync, it pulled in all kinds of old contact information, and in many cases replicated many of the entries. What I would like to know is if anyone knows where it is picking up this information, and is there a way to edit it on my desktop, and then do another Active Sync, making the Desktop replace the handheld data. Any ideas or suggestions will be greatly appreciated.

    Amf
    You should make a back-up of your contacts on your computer anyway, regardless if you proceed.
    On my Macbook I go into Contacts> File> Export> Export Archive
    Cheers

  • Editing contacts in Backup Assistant

    I have 2 phones on my account.  Backup Assistant defaults to the primary line.  There must be a way to change to the secondary line to edit contacts on that line but i haven't found it.  Any suggestions?
    Thanks - Ron

    You will need to set up a seperate MyVerizon account for the second line to manage Backup Assistant for that phone.  Go to the MyVerizon login page and click the link to create a new account and use that phone's number.  The account will have limited access to account information (the total bill and that line's usage), and be able to manage BA and any media purchases for that line.

  • Security questions have incorrect information how do I edit the information?

    Security questions have incorrect information how do I edit the information?

    How to reset your Apple ID security questions.
    Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
    Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
    Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.
    This will generate an automated e-mail that will allow you to reset your security questions.
    If that doesn't work, or  there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
    Next, go to https://getsupport.apple.com
    (If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
    Choose 'More Products & Services', then 'Apple ID'.
    A new page will open.
    Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
    Click the blue 'Continue' button.
    Select the contact option that suits your needs best.

  • Can I clone contact information to speed up the entry of new contacts?

    I go to meetings and get business cards from 8 people at the same company. Once I put one contact in, much of the contact information is the same. Is there a way to clone a contact so that I just have to edit the name, phone, and email address so I don't have to type it all in again?

    Drag an existing contact from the contact list of your address book to the desktop.
    Drag the resulting .vcf file back into the contact list.
    Choose to review duplicate.
    Choose to keep both.
    Choose to import.
    Edit the new contact.
    Have a nice day.

  • Contact information via mail

    Hey guys,
    I´m trying to send a contact information via mail from my iphone4, but it always fails.
    The mail appears in the choosen mail account and I can open it, but the mail is empty!
    After several trys with different mail accounts like yahoo, or hotmail I gave up...
    I´m sure that I´ve done everything correct. After opening my contacts I picked the contact I wanted to send
    and taped on "send via mail" at the bottom of the contact informations. So a new mail is created in my outbox
    and just has to be send. You can even see that the file is included.
    Thanks in advance!

    Correct, there is no way to get into the phone without the original owner's Apple ID and password.
    If the person you bought it from was not the original owner, there's a decent chance you may have bought a stolen phone. If it was legitimately sold, the seller should have done the following procedure so you would be able to activate the phone without their information: What to do before selling or giving away your iPhone, iPad, or iPod touch.

Maybe you are looking for

  • Banded report in Report header of a subreport

    I know how to make a details section of a subreport or a report banded, but I'm trying to create alternating color with several different Report Headers. I need to do this because my information i have in my report has separate columns in the databas

  • Anyone suing MySQL with Cocoon?

    I'm trying to get started with Cocoon because we have a couple of project where we need to publish reports in PDF and other formats, so I'm trying to get the database connectivity part working. I set up the database for the personnel example, set up

  • How can I reveal secret text with my mouse?

    I have a potentially difficult task at hand. I will do my best to phrase my question in a way that will describe my goal effectively. I have created an area within my flash website where there are two sets of lyrics for a song. I have the first set o

  • How do i get the volume to change

    I just unplugged my headphones and now i can't change the volumen. Sound is only emitted when headphones are plugged in. When they are not and i try to change the volume, the is a prohibition symbol  (crossed circle) under de Sound icon. What do i do

  • Powerbook won't connect to the internet via Ethernet?

    Hi Just recently, my 1.5 GHz powerbook won't connect to the internet with an ethernet cable. It connects fine at home when it's connecting through the airport, but then I try to use it with the ethernet cable it tells me that "Ehternet may not be abl