Edit CSS using Code View when double-clicking in CSS Panel

In CS4, when I wanted to open a linked style sheet for editing, I could right click or double click any CSS entry in the CSS panel to Go to Code. This would open the style sheet and goes to the line where the rule is defined. It's properly set in the Preference pane to Edit using Code view but hasn't worked ever since upgrading to CS5 and it is a real hinderance on my productivity.
Does anyone else have this problem. More importantly what is the fix?
(I noticed this question had been asked before but was never answered http://forums.adobe.com/message/210015)

OK, I may have found something. It seems to be an issue with template (.dwt) files. Can you reproduce and test this theory?
When I open a template child page, everything seems to work as expected. It doesn't seem like I can reproduce your symptoms.

Similar Messages

When Double-Clicking In CSS Panel missing in Dreamweaver CC 2014

Hello,
Please help me. I not have this option in Edit > Prefrences > CSS Styles > "When Double-Clicking In CSS Panel" in Dreamweaver CC 2014.
How to show it
I use windows 8.1

Use the new CSS Designer Panel.
Dreamweaver Help | CSS Designer panel
Nancy O.

Audio and video don't open together in viewer when double clicked

Hello everyone!
I'm having an annoying problem... it isn't something terribly important, but has decreased my work flow speed. Recently, I've had some trouble opening clips from the timeline in the viewer with the double click.
If I double click the video portion of the clip, even if both the video and two audio tracks are highlighted (and are still linked) only the video portion of the clip will appear (along with "filters" and "motion" tabs) in the viewer, and similarly when double clicking the audio tracks, though both video and audio are highlighted, only the audio tracks and "Filters" tab show up in the viewer. Additionally, once the item is double clicked at the left with the jigsaw pieces that can be used to set video and audio destinations, if I've clicked on an audio portion so only audio shows up in the viewer, only the jigsaw pieces for the two audio tracks (a1, a2) are visible, video track (v1) is no longer present, and vice versa.
I'd appreciate any advice that you all have! It's really driving me batty, in addition to not knowing what I did to make it that way, I can't figure out how to change it back!
Heather

Thanks for the advice.
The clips already appeared to be linked, and the selection "link" was checked, however when I unlinked and then relinked I found that the audio and video would open up at the same time in the viewer... problem apparently solved! However, the clips I had been working with I had to nudge audio and video a few frames apart (out of sync) to get the audio and video to line up. (gives the little red box with a +or- number in it on the clip).
When I unlinked and then relinked, the clip lost those red boxes and went back to being synced (as far as FCP is concerned) with the audio and video unaligned.
So, the problem appears to be coming from when I move the audio and video of a clip out of sync... why is this? Is this something I'm just going to have to deal with?
Thanks
H

Can't edit in Design tab - "overflow: hidden (double-click to edit)" - cause, remedy?

In the Design tab, the content of some web pages becomes uneditable (where it had previously been editable), even though it is in an editable region in the template. All of the uneditable text has a black background. When the cursor is floated over this text a popup gives the message "overflow: hidden (double-click to edit)". (Note: the text is still editable in the Code tab.) Double clicking in the Design tab often doesn't do anything but sometimes corrects the problem. The following also didn't help:
1. Making revisions in the Code tab and then refreshing. (The revisions show up in the Design tab but the text there is still uneditable.)
2. Closing and reloading the page.
The content of other pages that use the same template remains editable.
What causes this problem?
What is the best method to prevent it and correct it?
DW CS6
Win7 x64
Thanks,
Don C.

The problem is always a side-effect of the use of the overflow:hidden style. So why use it? It's tremendously valuable as a way of clearing floats inside a container, rather than adding a float clearing page element. And besides, if you can still edit the content in Code view, why worry? Anyhow, paste this into a new HTML page and try it.
<div style="height:100px;overflow:hidden;">
<p>This content will not be editable without double clicking on it. Furthermore, any floats contained within this div will be cleared before closing the div, allowing the div to completely wrap its contents.</p>
<p>This content will not be editable without double clicking on it. Furthermore, any floats contained within this div will be cleared before closing the div, allowing the div to completely wrap its contents.</p>
<p>This content will not be editable without double clicking on it. Furthermore, any floats contained within this div will be cleared before closing the div, allowing the div to completely wrap its contents.</p>
<p>This content will not be editable without double clicking on it. Furthermore, any floats contained within this div will be cleared before closing the div, allowing the div to completely wrap its contents.</p>
</div>
In Design view, you will only see two paragraphs. When you click in either of those two paragraphs, you will not be able to edit anything. When you double click you will see the div expand to show all 4 paragraphs, and you will then be able to click and edit at will.

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

When I type a link to a page in my root directory in code view and I click on the link in live view it does not go to that page. But if I preview in a browser it works fine.

When I type a link to a page in my root directory in code view and I click on the link in live view it does nothing. When I then go to preview in a browser it works fine. Can anybody help?

I am not sure however I suspect live view is for viewing the page you are working on. You would have to open the other page to see it in live view. The browser on the other hand is doing what it is designed to do. I jump back and forth all the time from live view to the browsers I have installed.

Movies with iTunes Extras show only HTML code and not title screen when double clicked.

I only noticed this after some iTunes updates. Any movies that have iTunes Extras donot show the "Title Screen" when double clicked. They only show HTML script. I can still watch the movies, and can access the extras by going to the folder they are in, but thats a pain. I have purchased other movies with extras since encountering the problem and have the same issue. I run windows Vista on a 32-bit system. I have all updated drivers. I have searched the web for an answer but couldnt find anything. It is prob something insanely easy. Any help would be appriciated.
Example of text that appears when double clicking:
<!doctype html>
<html>
<head>
     <meta http-equiv="Content-type" content="text/html; charset=utf-8" />
     <meta name="hdtv-fullscreen" content="true" />
     <meta name="hdtv-cursor-off" content="true" />
     <title>Paul (Unrated) [2011]</title>
     
<script type="text/javascript" src="TuneKit/src/TuneKit.js" charset="utf-8"></script>
     
     <link rel="stylesheet" href="css/shared.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/home.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/chapters.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/features.css" type="text/css" media="screen" />
     <link rel="stylesheet" href="css/more.css" type="text/css" media="screen" />
     
     <script type="text/javascript" src="controllers/data.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/home.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/chapters.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/features.js" charset="utf-8"></script>
     <script type="text/javascript" src="controllers/more.js" charset="utf-8"></script>
</head>
<body>
     <div id="bleed">
          <div id="navigation">
               <img id="pic0" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
          <img id="pic1" class="picBLANK" src="images/home/Paul_mm_background_01.jpg"/>
               <img id="pic2" class="picBLANK" src="images/home/Paul_mm_background_02.jpg"/>
          <img id="pic3" class="picBLANK" src="images/home/Paul_mm_background_03.jpg" />
          <img id="pic4" class="picBLANK" src="images/home/Paul_mm_background_04.jpg" />
          <img id="pic5" class="picBLANK" src="images/home/Paul_mm_background_05.jpg" />
          <img id="pic6" class="picBLANK" src="images/home/Paul_mm_background_06.jpg" />
          <img id="pic7" class="picBLANK" src="images/home/Paul_mm_background_07.jpg" />
          <img id="pic8" class="picBLANK" src="images/home/Paul_mm_background_08.jpg" />
          <img id="pic9" class="picBLANK" src="images/home/Paul_mm_background_09.jpg" />
          <img id="pic10" class="picBLANK" src="images/home/Paul_mm_background_01.jpg" />
               <div id="vid" class="vid_bg">
                    </div>
          </div>
     </div>
</body>
</html>

The fix from this other post worked for me.
https://discussions.apple.com/message/17691332#17691332
FIX:
Go into "Get Info" and set the Album name to the name of the movie for both the movie and the "Extra". This will fix it.

I am using a MacBook Air, OS X ver 10.9.4, mail ver 7.3. Intermittently I can not open individual mails when double clicking on them. I must go out of mail and back in before mail will open.

I am using a MacBook Air, OS X ver 10.9.4, mail ver 7.3. Intermittently I can not open individual mails when double clicking on them. I must go out of mail and back in before mail will open.

Hi Eric
Good idea, but I am still having the same problem.
Thanks very much
Neil Lilien

I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.

I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.

Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false

Problem while displaying the data when double clicked on JTable element

Hi All,
i have one List box( JList ) and one table (JTable). Both JTable and JList are positioned on the same Frame. I am able to drag the elements from JList to JTable and also i have added the mouse click action on both List box and JTable.
if i double click on JList element, that will popup one dialog box.
if i double click on JTable cell element that was dragged from JList, that will popup same dialog box which was opened earlier for JList action.
But my problem here is:
Suppose if i drag the four elements one by one from JList to JTable and (after four elements dragged) double clicked the first element which was dragged first that displayed the popup dialog box structure correctly but the data displayed in that was not correct. It is showing the data of recent dragged element( i.e, fourth element).
But if i double click on JList element that is showing the correct data according to the double clicked element.
What might be the problem here, why it was not displaying the correct data when double clicked on JTable element.
Please help me here.
Many thanks in advance.
The following code is used in mouse clicked event method of JList
private void listMouseClicked(java.awt.event.MouseEvent evt) {
         if(evt.getClickCount()==2){
         AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
         assignResource.show();
}                AND The following code is used in mouse click enevet method of JTable.
private void tableMouseClicked(java.awt.event.MouseEvent evt) {
        if(evt.getClickCount()==2){
         int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));
         int col=table.columnAtPoint(new Point(evt.getX(), evt.getY()));
         if(row==-1||col==-1){
             return;
          Object obj=table.getModel().getValueAt(row, col);
         if(obj==null||(obj.equals(""))){
           }else{
         AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
         assignResource.show();
     }            Thanks & Regards,
Maadhav....
Edited by: maadhav on Jul 1, 2009 7:22 AM

I doubt it is related to your problem but:
int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));Why are you creating a new Point? Just use evt.getPoint().
Object obj=table.getModel().getValueAt(row, col);Don't get the data through the model method, get the data through the table method:
Object obj = table.getValueAt(...)
This way it will work even if the table happens to be sorted.
Instead of creating a AssigningResourcesUI object, just disply the value retrieved from the model. That way you know whether the problem is with the mouse event code or your UI class. Like Walter suggested above I"m guess the problem is with your UI class.

Quick - Adobe Genius Needed: Footage and stills are black when double clicked - audio but no image ? What the ... ?

I am doing the training video as this is the first time i have used premiere pro cc or any version of it at all. I have downloaded the footage and stills as shown in the video but when i go to double click the beach footage it comes up as black - i can hear the waves but the video isn't playing. Same with the stills, they do not show up when double clicked either, they are just black. Dont know what to do. Your help would be greatly appreciated.
Cheers

Without a screen shot, it's hard to know why the footage/stills are black. Double-clicking the asset opens it in the Source monitor, as opposed to the Project monitor, which could be black if the playhead is not set to a portion of the timeline that shows a movie clip or still. Perhaps your Source monitor is closed or hidden for some reason. After double-clicking the asset, select Window > Source Monitor in the main menu. You should be able to select the specific asset (e.g., Shot_01.mp4) and then see it on the screen. Make sure you also select Window > Workspace > Editing so that your panel layout shows the various panels properly.
HTH,
Stefan

How do I take the zoom feature off my MacBook Pro? I have already went to System Preferences and turned "zoom" off in the Universal Access. I saw where someone said to use THREE fingers to double click... ??? Double click what? And 3 fingers?

Can someone help me?How do I take the zoom feature off my MacBook Pro? I have already went to System Preferences and turned "zoom" off in the Universal Access. I saw where someone said to use THREE fingers to double click... ??? Double click what? And 3 fingers?

What really cheeses me off here is that Apple isn't allowing users enough customization. With each update of iTunes (and the OS and iOS) we're forced to give up something that worked well for the way we want to use the app and make do with fewer (and lamer) options. If Apple keeps this up, they're going to start losing customers fast. I mean if this isn't fixed soon, I'm pretty sure I'm going to give up on iTunes, and then I'll probably go ahead and get a Galaxy when I need to replace my iPhone.
What I don't understand about how they won't let users delete the list of available podcasts now is why? How is this making it a better program? I can understand that not all users are capable enough to right-click on a feed and select "Show all available episodes", so I can see why they want the complete list to be the default (and, surprise, it already was). But to not give users the option to delete that list? It's inconsiderate because it makes navigating feeds with a large back catalogue really frustrating. I'm flabbergasted that no one at Apple considered all the podcast feeds that keep hundreds of episodes available when they removed this feature. It smacks of rank incompetence.
What improvement were they trying to make here anyway? There was nothing wrong to my mind about how podcasts were managed in previous versions. Whatever improvement they were trying to make here, they should have realized that many users would at least want the option to keep things the way they were.
And reverting to a previous version is no solution. I can't sync my iPhone with the new iOS without this update, and (while I do have some issues--specifically how you can't play podcasts in the Music app anymore) I do like the new iOS.

How to get the alv grid report in another screen when double click on basic

Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.

On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
    ls_fieldcat-tabname   = 'IT_FINAL_VALID'.
    ls_fieldcat-fieldname = 'AUFNR'.
    ls_fieldcat-scrtext_m = 'Service Order'.
    ls_fieldcat-ref_table = 'AUFK'.
    ls_fieldcat-ref_field = 'AUFNR'.
    ls_fieldcat-col_pos   = 1.
    ls_fieldcat-outputlen = 12.
    ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
    APPEND ls_fieldcat TO fcat_valid.
Hope this helps.

RH7 HTML - Receive IE script error message when double-clicking link to auto-size pop-up

Hi, all,
Anybody ever seen this situation? When double-clicking on a link to an auto-size pop-up, I get the following Internet Explorer script error message:
This error also occurs when I double-click the link in preview mode within the project. A colleague that is running the same version of IE with the same settings is not receiving this error. A couple of other co-workers are running a different version of IE, and one gets this error and one does not.
This error does not occur if you single-click the link (which you would normally do), nor does it occur if you double-click a link to a fixed-size pop-up. Once you receive this message and click Yes or No, the link sometimes works correctly when you double-click. I haven't been able to establish a pattern. Also, if you single click the link to display the pop-up, click off of it, and then double-click the link, the error does not occur.
As you can tell by now, this problem is kind of hard to pin down. I've done some research and I have yet to stumble upon anything that deals with this issue. Unless there is a solution out there, I can do one of two things: 1) change all of the auto-size pop-ups in the project to fixed-sized, which defeats the purpose of creating auto-size pop-ups, or 2) tell our customer not to double-click links.
Any advice you could give would be welcome.

Hi there
Indeed it has been reported on many occasions over the years. Unless someone like Willam has some way cool error detection magick with the scripts, the best approach we have always offered is this.
Educate your users on the way computers and HTML works. HTML works using SINGLE clicks, not DOUBLE clicks.
The reason for the error is because the first click caused the computer to launch a JavaScript command to open the sized popup. The second click that followed in rapid succession confused things by asking the script to stop what it was doing and run again.
Maybe it would help to explain it to your users like this. If you visited a restaurant and when the server asked what you wanted to order, would the become confused if you said to them: I'll have the T-Bone Steak and nearly immediately you repeated it by saying again I'll have the T-Bone Steak.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Edit CSS using Code View when double-clicking in CSS Panel

Similar Messages

Maybe you are looking for