Edit Date updated for whole catalog (how to view edit date?)

I suddenly found out that my publish service that exports newly edited photos suddenly contained all my photos, and I have no idea how that happened. It seems the Edit Date has been changed, but I can not find any way to view the date, so it's difficult to pinpoint exactly when it happened.
So - two questions:
How could that happen? I have not made any mass updates and not changed the development version either
How to view the Edit Date?
Thanks

Well, a good guess would be: something is getting (or did get) changed.
If its not a plugin, then its something else (at the risk of stating the obvious...)
ChangeManager can provide a detailed list of all develop settings and metadata changes between any two states of a photo, so if its develop settings or metadata that's changing, then you can see exactly what.
Some kinds of changes ChangeManager can not detail - if the changes are falling in the "mystery" class, at least you'd have it narrowed down... - may be worth trying...
PS - Have you checked Metadata Status Date in the library panel - thats the closest thing I know of to the edit-date that is exposed by the Lightroom UI - you cant filter or collect on it, but you can at least view it.
R

Similar Messages

  • HT4847 How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

    How i take an old back form my old iphone to my new iphone?!when i acces icloud from my phone and go to manage storage i have 4 back up for diferent phone how can acces this data?!

    Thanks very much!
    Although I had to add everything again to the playlist, at least I can just copy it over in future!

  • How to view the date when the Customers credit limit updated in SAP-FSCM?

    How to view the date when the Customers credit limit updated in SAP-FSCM?

    OK you can look at field - LIMIT_CHG_DATE in the table - UKMBP_CMS_SGM via SE16
    I would assume you would want to run it based on a date range.

  • Never received the iOS 7 update for my iPhone4 how do I get it?

    I have an I phone 4 and never received the update for iOS 7 how do I get it?

    The update is not automatic.
    You can either update over wifi by going to Settings - General - Software Update.   If you have enough space on your device you can upgrade.
    OR
    Update via iTunes.   You will need to update iTunes first, then you SHOULD perform a complete backup (just in case) then update your phone.

  • How to view creation date using 'ls' command?

    Hi all,
    Anyone know how to get the 'ls' command to display creation date? When I do 'ls -la' I get the mod date, but cannot figure out how to view the creation date.
    Thanks!
      Mac OS X (10.4.2)  

    While there is NO way to do this as ls will only show the mod time there is using another program
    DL this HFSDebug.
    Running it on any file will display to you Create, Mod and access times. An example for you
    sudo hfsdebug /usr/local/bin/hfsdebug\ 2.04\ BETA\ G5
    path = Firefly:/usr/local/bin/hfsdebug 2.04 BETA G5
    # Catalog File Record
    type = file
    file ID = 20112378
    flags = 0000000000001010
    . File has a thread record in the catalog.
    . File has security data (ACLs).
    reserved1 = 0
    createDate = Wed Dec 14 00:57:14 2005
    contentModDate = Wed Dec 14 00:57:14 2005
    attributeModDate = Wed Dec 14 00:57:14 2005
    accessDate = Thu Dec 15 20:42:53 2005
    backupDate = Fri Jan 1 00:00:00 1904
    # BSD Info
    ownerID = 0 (root)
    groupID = 20 (staff)
    adminFlags = 00000000
    ownerFlags = 00000000
    fileMode = -rwxr-xr-x
    linkCount = 0
    textEncoding = 0
    attrBlocks = 0
    # Finder Info
    fdType = 0
    fdCreator = 0
    fdFlags = 0000000000000000
    fdLocation = (v = 0, h = 0)
    opaque = 0
    # Data Fork
    logicalSize = 121744 bytes
    totalBlocks = 30
    fork temperature = not a hot file
    clumpSize = 101 bytes
    extents = startBlock blockCount % of file
    0x362cd4 0x1e 100.00 %
    30 allocation blocks in 1 extents total.
    30.00 allocation blocks per extent on an average.
    # Resource Fork
    logicalSize = 0 bytes
    Enjoy!
    Peter
    PowerMac G5 DP 2.5Ghz   Mac OS X (10.4.3)  

  • How to load the data from informatica into bw & how to report the data

    Hi friends,
    how to load the data from informatica into bw & how to report the data
    using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
    Thanks,
    madhu.

    Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
    For BW informatic integration refer following docs:
    http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
    http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
    http://devnet.informatica.com/learning/ePresentations.asp
    http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
    http://www.informatica.com/customers/utilities_energy/fpl_group.htm
    http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

  • How to view current  date and time on SAP screen

    Hi Everybody,
    How to view current  date and time on SAP screen .I have set time zone in T-code STZAC.now iam getting correct date n time in my tranctions but i want to check without any tractions
    Plz repay,Regards,
    Sadik.

    Hi,
    You can check the time by running a report .
    It will show the database and central instance time : Report name :rsdbtime
    Thanks and Regards
    Vijay kumar G
    Edited by: vijay kumar gopal on Mar 4, 2008 1:09 PM

  • How to view plan data

    Helloo experts,
    I want to see the actuals and <b>plan</b> data for  given <b>costcenters/Internal</b> orders.
    I use T-code: KSB1 for viewing Actuals data. But, I dont know how to view Plan data. 
    What is the best way to look at it.

    Reddy,
    What do you mean by you want to check this data ? Well this is the data that was entered into SAP by some excel ( i am guessing) - So that's the data that was inputted into SAP.
    Do you have any other system where you do the planning and then load it into SAP ? If you want to compare with that - yes you can.
    If you are using BPS for planning, yes you can compare by preparing a report from the transactional infocube in BW ( which would hold the planning data) with this R/3 report.
    Hope that helps - Let me know if you need any other info.
    Thanks,
    Nandita

  • HOW TO VIEW SPATIAL DATA

    I don4t know how to view spatial data stored in an oracle database with a graphic representation.
    Are any ORACLE product to do this? Or any third party product?
    Thanks

    In Oracle 8.1.6, OEM ships with a simple
    Java viewer to help you tune your data.
    At the command line, type:
    oemapp sdoadvisor
    In Oracle's next release (8.1.7) the JDBC
    access to Oracle Spatial types is
    much faster (more comperable to OCI access).
    You will see the improved performance
    in the OEM tool.
    =====
    There is also an unsupported Motif visualizer
    (written in PRO*C and OCI).
    You can download the motif viewer at:
    http://technet.oracle.com/products/spatial/
    under "sample code".
    It is compiled for Solaris, but you
    can compile it for any UNIX platform.
    Hope this helps. Thanks.
    Dan

  • How to view complete date stamp in query result view in sql developer?

    Hi,
    In the query result, the date present in db is shown as DD-MM-YYYY format but I want to view the complete date stamp. When I view the same data in aqua data studio, I see the complete time stamp. Please let me know if I need to do some settings in Oracle SQL Developer so that complete date is shown?
    How to view complete date stamp in query result view in sql developer?
    Thanks in advance,
    Vineet

    864793 wrote:
    Hi,
    In the query result, the date present in db is shown as DD-MM-YYYY format but I want to view the complete date stamp. When I view the same data in aqua data studio, I see the complete time stamp. Please let me know if I need to do some settings in Oracle SQL Developer so that complete date is shown?
    How to view complete date stamp in query result view in sql developer?
    Thanks in advance,
    VineetAlternatively you can execute below
    set nls_date_format='DD-MM-YYYY HH24:MI:SS';Regards,
    Achyut K

  • Delta update for Info cube, How it will be works, what are mode to select.

    Hi all,
                  How delta update works for info cube, Generic data source delta update options are
                  1) time stamp
                  2) Calday
                  3) Nemeric pointer
    Please explain briefly delta update for infocube and delta init and delta update.
    Thanks,
    Gowda

    Hi,
    How delta update works for info cube
    When you are updateing the data to cube from ods then data would extracted from change log their delta pointer get setup in the source request (in Source you can check the option beside the reqest says updated to target object.... it means the records are updated to target hence we would not update the same request )
    Incase of PSA to cube Also in the PSA  request get stamped as last updated .
    Regarding Generic Datasource
    When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
    Check the below link for More about generic DS .
    http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
    for Delta capturing you can use
    Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
    Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
    Re: Extraction, Flat File, Generic Data Source, Delta Initialization
    Regards,
    Satya

  • I just updated my iPhone to iOS  5 and now there is no "edit" button on my contacts. How do I edit contacts?

    Hello i have two iphones with different contacts on each.  After updating both to 5.0 i set to off the sync on the contact for one iphone so to avoid mixing or loosing contacts.  On that iphone i can not edit contacts.  Please how can i edit them without sync with the other iphone?>

    See http://support.apple.com/kb/HE57.

  • How to get period date of for a given month from a given date in mdx for SSRS report (mm/dd/yyyy)

    I have a situation,  where i need to write expression Period to date(PTD). i want to know how to get the period date. i want you to help in writing Period date or else is there any function to get period date for a given date(the  date is given
    from the parameter dynamically) in MDX for SSRS report
    ram

    Hi ram,
    Per my understanding that you want to get the period date based on the month selected and the given date, right?
    Could you please provide details information below to help us better understanding your requirements, thus we will be more effective to provide an solution:
    What is the format of the period date you want to get, is this date in the DB and you want to filter it based on the month and the given Date?
    Did the month and given date are two parameters in the report? if possible, could you please provide some sample data in the DB and also the snapshot of the report structure
    I assume you want to get the period date(mm/dd/yyy) between the select month(e.g:Feb) and the given date (10/1/2014) and you should get the date between(02/01/2014-10/1/2014).
    If so,and you also have two parameter "Month","EndDate"(EndDate is the given date), please reference to details information below:
    You can create an new parameter "BeginDate" (Date/Time) which is the begin date of the period, you can use the expression to get the value based on the value of the month and the year value from the given date,finally hide this parameter:
    Specify the available value:
    Label:=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value)
    Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
    Specify the default Value:
    Value:=CDate(=Parameters!Month.Value &"/01/"& DatePart("yyyy",Parameters!EndDate.Value))
    Add filter to the dataset as below:
    Preview you will get all the date in the given Period:
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu

  • S_ALR_87012168 - Due Date Analysis for Open Items - How to add a column?

    Hello,
       I am trying to add a characteristic to the output of this report. I am trying to add the Reference field from BKPF to the list of available characteristics to choose from. It is available in the dynamic selections list so the field should be available in the program, I am just not sure how to get it onto the char. list.
    S_ALR_87012168 - Due Date Analysis for Open Items
    Any help would be greatly appreciated!

    Sorry but had to go in a different direction...
    Thanks!

  • The iphone and itunes shows a short version of a voice memo instead of full. only by pushing edit i see the whole thing. how can i see and export the full thing?

    I recorded a voice memo but in itunes and also in iphone i can see only a hort version of my record. if i push edit, it shows the whole thing. How can i export the whole thing and listhen to it ? It only plays the 3.5 minutes instead of 35 minutes...
    Please help ... it is a really inmportant record of a doctors.

    this one is actually a really rare symptom of a flaky connection to the ipod on a Windows PC. there's more going on in terms of hardware on nanos and 5th gens than in the earlier models ... so if the connection is flaky to precisely the right/wrong degree, itunes will see the ipod, but misidentify it as an earlier version of ipod.
    tracking down the cause of the flakiness can be tricky ... as you already know ...
    just checking. have you tried connecting with a different (known-good) USB cable? does that seem to have any impact on the rate of occurence of the problem?

Maybe you are looking for