Edit Disable Panel Grid Alignment does not affect the Positioning of Front Panel Labels

In LabVIEW 2010, when I choose Edit>> Disable Panel Grid Alignment the positioning of Front Panel objects gets much finer so that I can make small adjustments. Put it does not seem to affect the positioning of front panel object labels. These object labels still move in very coarse increments and do not allow me to position them carefully.
How do I turn off the Grid Panel alignment for Front Panel Labels?

The positioning of labels you encounter has not so much to do with any grid, but with the fact that for labels, LabVIEW attempts to snap them to one of the control corners if you get close enough to the owning control. Outside of a certain range of the owning control you should be able to place them easily on any pixel. The snap behaviour of owned objects is not configured through the panel grid option. I'm not aware of an option to disable this behaviour, but usually find it rather handy instead of annoying. If it happens to not be exactly as desired, I adjust with the label selected and using the cursor keys.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive

Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive. I already know that you can partition the internal hard drive to do the very same. Idon't want to use any of the internal space to run windows so I'm asking if it is possible to use a flash drive or external drive through USB to run windows when it is plugged in.

Read https://discussions.apple.com/thread/5043762?start=0&tstart=0 to discover you can't do it.
Allan

[svn:fx-trunk] 5465: Now that padding set on a TextInput does not affect the inner textView, we need to add a custom TextInput skin for the TextInput a Spark NumericStepper contains .

Revision: 5465
Author: [email protected]
Date: 2009-03-20 11:52:56 -0700 (Fri, 20 Mar 2009)
Log Message:
Now that padding set on a TextInput does not affect the inner textView, we need to add a custom TextInput skin for the TextInput a Spark NumericStepper contains. Jim ok'ed the addition of the new FxNumericStepperTextInputSkin.mxml class into the spark.skins and wireframe packaged.
SDK-18275, SDK-19849
Reviewer: Glenn
Checkintests: Pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18275
http://bugs.adobe.com/jira/browse/SDK-19849
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxNumericStepper.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperSkin.mxml
flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperSkin.mxml
Added Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperTextInputSkin .mxml
flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperTextInputSkin. mxml

Revision: 5465
Author: [email protected]
Date: 2009-03-20 11:52:56 -0700 (Fri, 20 Mar 2009)
Log Message:
Now that padding set on a TextInput does not affect the inner textView, we need to add a custom TextInput skin for the TextInput a Spark NumericStepper contains. Jim ok'ed the addition of the new FxNumericStepperTextInputSkin.mxml class into the spark.skins and wireframe packaged.
SDK-18275, SDK-19849
Reviewer: Glenn
Checkintests: Pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18275
http://bugs.adobe.com/jira/browse/SDK-19849
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxNumericStepper.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperSkin.mxml
flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperSkin.mxml
Added Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperTextInputSkin .mxml
flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperTextInputSkin. mxml

What does not affect the size of the classfile

Hi
does inclusion of extra whitespaces affect the size of the classfile (that gets created after compiling).
does inclusion of java comments increases the size of the classfile.
are there any other things that when included, does not affect the size of the classfile.
Madhu_1980

Madhu_1980 wrote:
Hi
does inclusion of extra whitespaces affect the size of the classfile (that gets created after compiling).You can test this yourself easily.
>
does inclusion of java comments increases the size of the classfile.Another one you can test very easily.
>
are there any other things that when included, does not affect the size of the classfile.
Madhu_1980Shouldn't you be worried about getting your program working by using the right constructs rather than constructs which result in a smaller .class file?
Are you restricted on the sizes of your .class files?

Either I can't find my printer control panel or it does not have the scan icon

I have an HP Deskjet 3055A J611 Series, which is running on Windows 7.
It is important that I scan several pages and place them all in one file. I understand that this requires that I access the printer control panel. I have accessed the printer through the icon "devices and printers", and the panel that comes up have only the following 4 items: am unable to scan from my printer control panel: HP Printer Assistant; See What's Printing; Set Preferences; Customize your Printer. Perhaps this is not the control panel? If not, then I do not know how to access the control panel. On the other hand, if this is the control panel, then it does not have all of the icons and I do not know why. Could you please help? If I can't get this straightened out, I will need to find another printer that can easily scan documents with several pages onto one file.
Thank you in advance,
Maria ROBLE
Language-incontext, FRANCE

Welcome to the forums @CLEANA , Maria
I understand you are not seeing the options within the Printer Assistant to change the scan options to allow you to save a multi-page scan as one file.
I would first suggest installing the Full Feature Driver to install the scanning options.
Click here to download: HP Deskjet Full Feature Software and Drivers
Afterwards, you should see the printer software on your Desktop, open it up, click on Scan a Document or Photo, select the "Advance" option and you should see this box to check mark to select:
I hope that helps!
Happy Tuesday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to ensure that an accrual (FBS1) that was cleared and reversed/reset (FBRA) does not affect the books while being in open items (FAGLB03)?

At first the user created an accrual using FBS1 for reversal on 5/1/2015.
This created a clearing document.
Then it was mistakenly reversed by the user for 5/1/2015 by using F.81
This also created a clearing document.
Based on advice in the following thread: Delete reverse accrual/defferal documents | SCN ,
the user used FBRA to reset and reverse the document. We are unsure if the reset and reverse command was used or just the reset choice.
Now the accrual value is in the respective accounts with an open status (i.e. red button). Does this mean that the entry has already been discarded and it won't affect the accounts? Or does one then use FB50 to reverse the effects of the accrual in the current and next month?

Hi
I guess that the user has not reverse the transaction as its still shows as open item in 30 /4 .. so I belive that you need to use fb50 or simply use FBR2 and enter the original entry no and the choose (generate reversal posting option )..
regards
mahmoud el nady

Cluster does not populate in sub-vi unless front panel is opened

I have a sub-vi that saves my data to a database and the cluster
containing the data will not populate unless I open the front panel
when it executes. What could possibly cause this?

It is the readings cluster that does not populate. That is the input cluster for the vi. When I run in the development environment the program saves correctly without opening "Save Readings.vi". However after the complete program is compiled the data will not save unless "Save Readings.vi" is opened when it executes. I have attached the missing vis
Attachments:
Log SQL.vi ‏27 KB
Connect SQL Server.vi ‏48 KB
Update Process Info.vi ‏81 KB

Create a heading style that does not affect the whole paragraph?

Hi, I would like to make a style for headings that only affects the first sentence. I want to have a style that is a certain bold type to be the heading for a section, but then I want body-text to continue without a new paragraph. Like this:
"*Writing as a category.* Writing, more particularly, refers to two things: writing as a noun, the thing that is written; and writing as a verb, which designates the activity of writing..."
Right now I am just using a character style for the first words but then I cant make adjustments to the spacing before this paragraph and it wont appear in the TOC.
I don't know if I have made myself clear but I hope you get the point. Is there any way to do this in Pages?

As far as I know, headers are available in the area entitled "Paragraph Styles" not "parts of Paragraphs Styles".
Here is a quick and dirty workaround.
I created my own custom character style "none 2" which I may apply to the end of a styled paragraph.
Given that, I may have a paragraph whose beginning is 'styled' and end isn't.
The drawback is that the entire paragraph appears in the TOC.
In France we say "On ne peut avoir le beurre et l'argent du beurre"
Yvan KOENIG (from FRANCE dimanche 15 février 2009 17:51:36)

What can affect the size of a front panel object between versions of Windows?

Greetings, all!
I have a client that wants to use a piece of LabVIEW code on Windows XP, Vista, and 7. The application was originally written to run on XP machines, so everything looks OK there. However, on Vista or 7, certain front panel objects appear larger than they do on the XP machine (in one example, all of the string fields in an array of strings are taller). Other objects (such as a text label) appear smaller.
The machines in question all appear to have comparable DPI settings, and monitor resolution does not seem to be a factor. The application uses Application Font in various sizes in the cases of interest. Can anyone suggest some other things we can check?
Thanks!

This issue is coming up more and more lately. Particularly as people move to Win7 machines. I've seen differences between my home Vista machine and my work XP machine.
It comes down to the system fonts used by the different OS's. XP's basic font is Tahoma. Vista uses Segoe. I believe Win7 is the same as Vista, but I'm not sure. The fonts appear similar, but one font or the other is slightly larger. So any features that are based on a font size will change. This includes the sizing of labels. Text within local, shared, global variables, and references. Enough that it can cause wires to move a few pixels on a BD, and objects that are aligned on one system to look slightly misaligned on another.
I think that if you set the fonts you use to a specific font, rather than Application font (which is taken from one of the current Windows font settings, you will avoid the issue. The other possibility is to define which font is used for the application font within your LabVIEW.ini. (Or the application's .ini file if it is built into an .exe.)
Do some searching on the forums for application font, system font, dialog font, windows versions. You'll find quite a few threads where people had different variations of this problem.

I am trying to group instruments together and send that to a sub mix. I can group them and attach a bus and it says that they are at sub mix 1 but the volume slider for the sub mix does not affect the recorded tracks.

I am trying to create a sub mix of several vocal tracks. I have highlighted the tracks and have assigned them to bus 1 (sub mix 1) but the sub mix slider does alter the loudness or softness of the track. I can move it up and down but nothing happens.

Make sure that the input for the Sub Mix track says Bus 1.

I have trial versions of Lightroom and Elements 11. "Edit in Photoshop.." does not open the image

Using trial versions of Lightroom and Elements 11, th ecommand to "Edit in Photoshop Elements 11" succeeds in opening Photoshop but fails to open the image. Any ideas?

I have the same problem with PS Elements 13 trial version (fully updated), but sadly this solution doesn't work... there is no 'Support Files' folder, and nothing called 'Adobe Photoshop Elements Editor.app' anywhere else.
Any thoughts?

Dep. Run does not affect the asset!!!

Hi experts;
     I wanted to make a Der. Run. for an asset in a closed Fiscal Year 2012. So I changed the closed Fiscal Year on OAAQ to set it for 2011 and opened the period on OB52 to allow posting in such year (2012).
     And then went to AFAB to run depreciation on the required asset, there was no error message but there is a WARRNING message ((No Document was created in this run)) however the TEST RUN completed successfully.
So, can anybody kindly advice and help thanks;
Thanks in advance;
Kind regards;
Ahmad Mahmud;

Thanks Ajay;
     it helped strongly where I found from it the way to Rerun Depreciation t-code AFAR.
But the point is, when I made test run it took into consideration the new value which I need to be calculated which is 1 USD as scrap value which was not given.
     So, i'll test it on server QAS and update you.
I hope it works correctly till the end and gives correct values.
Many thanks;
Ahmad Mahmud;

Adding SerialElements that do not affect the seek / total time

Can anyone suggest an appropriate strategy for this? I want to use something like this for mid-roll ads ect that could disable the controls etc. Could someone point me in the right direction? Is there any way to just reset the total time or to tag some elements as not belonging to the main time line?
Thanks

For me, I implemented midrolls using a similar approach described in a webcast that Jodie O'Rourke put out, basically it uses a proxy element and swaps out the real media for the midroll as necessary, it works quite well and does not affect the duration of the real media.
You can find the webcast here:
https://experts.adobeconnect.com/_a204547676/p82986027/?launcher=false&fcsContent=true&pbM ode=normal
Hope that helps!
Cheers,
mark

Itunes 6 does not access the cddb gracenote data base any more

i have installed norton products, but changing the setting does not affect the status, i could not successfully update to itunes 6+ and the girl from apple said it has no major upgrade in it, but my grace note data base does not work any more, i get a yellow triangle and problem with http and stuff, so i changed to winamp for filing my music, though i believe, sound wise, itunes might be slightly better, but winamp is consumer friendly and whiskey bernstein in my case, the "momo" time thief gray of itunes is not a turn on, so does any one know what can happen to the cddb data access ? merci, henri

Shaun Bromley wrote:
Well it's the way I've always done, and as far as I know it's the way it's supposed to be done.
It's can be done this way but it doesn't mean it is supposed to be done this way.
There are no duplicate items.
If you want to listen to a song on your iPhone and also on your iPod, you have to have a copy in each library.
You just tick sync all songs in each library then tick/untick each song as necessary for each library.
I never uncheck anything.
I just add/delete from a playlist and sync.
How the **** do we now know which library we are in???
You know which **** library you are in because it is the one you **** well opened.
If you only use one library, there is no wondering which library you are using.
Any way, good luck!

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module.

My version of LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits done in the basic module. That means that I can correct exposure, highlights, shadows etc. but once I go to another picture and returned to the edited one the histogram (on the edited photo) and specifically the clipping triangles are white or some other color. This is normally suppose to indicate that some channel or all channels are clipped in the highlight/shadow areas. If I adjust any slider in the Basic panel even as little as one +/- value or press the J-key, the histogram will now show the original edit. Moving on to another photo and then returning to to previously edited one and again the edits are "not saved" and I have to hit the J-key or adjust a slider to see the previously edited information reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot and return to it I cannot see from the clipping information whether the original edit was correct and of course I might re-edit it (to some now incorrect value). This brings up the second issue synchronization. I can't rely on it because if I go back to fine tune a specific image in the batch the triangles are white or some other color for that and every image. I have to hit the J-key to show/hide clipping or the back slash key to see before/after previews. This is the third issue which is very time consuming and inefficient regarding my workflow. The forth issue is that I have noticed that normally when an image is saved in PS, LR adds a copy of the saved version to its catalogue. I have noticed that the PS to LR saves are all wrong in terms of exposure (they are much lighter in tone) than the original LR edit and the PS edit on my screen. If I check the PS to LR photo in LR I notice that the Basic panel values have been changed and that I have to sync the image with the originally edited RAW/NEF LR file to get it to look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge monitor to view my NEF files. I have reverted back to using LR 4 however I am not sure if I should expect compatibility problems with Camera Raw 7.4 in LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X 10.10.1
Hopefully someone else has noticed this problem. Any shared information would be valuable. Thanks for the reply.

Happy New Year!
The Develop panel Tone settings in your Dec 31 screenshot show both the Highlights and Shadows controls set to negative values (-48 and -19). For most images (such as this model shot) they should be set to opposite values (-Highlights and +Shadows). To try and duplicate your issue I used negative values for both of these controls with a similar high contrast image. I noticed that the Shadows control becomes non-linear when both the Highlights and Shadows controls are set to negative values. As I moved the Shadows control from a positive value the Shadows clipping indicator comes ON as expected. Moving the Shadows control to a value caused the clipping indicator to turn OFF and moving it further negative caused it to turn back ON again.
The following screenshots demonstrate the issue with only Highlights & Shadows controls applied as shown.
The Highlights & Shadows controls set just to the threshold of extinguishing the clipping indicators.
Moving the Shadows control toward negative causes the Shadow clipping indicator to come ON (as expected), but at-13 it goes OFF again!
Moving the Shadows control further negative causes the Shadows clipping indicator to come back ON at -33.
This is probably normal behavior for the PV2012 Image Adaptive Tone controls as they were not designed to be used way (- - or ++ Highlights & Shadows). The PV2012 Tone controls all interact with each other, which is why it is suggested to adjust them from the Top down starting with Exposure. For most images using -Highlights and +Shadows of near equal value produces good results.
I still can't duplicate the change in clipping indicators after selecting another image, so it may be unique to certain camera models and/or lighting conditions.
SUGGESTION
Try one of the image files that exhibits this issue using the following PV2102 Tone control adjustment procedure:
Start with all of the Tone controls at their default 0 settings and adjust them from the top-down in the order shown below.
Set Exposure to correct midtone brightness ignoring the highlight and shadow areas for now. Setting Exposure slightly higher (+.25 to +.50 EV) than what looks correct for the midtones seems to work best with most images.
Leave Contrast at 0 for now. It’s usually better to adjust this after the first pass.
Adjust Highlights so that blown out areas are recovered and “fine tonal detail” is revealed.
Adjust Shadows to reveal fine detail in dark areas. For most normal images simply setting +Shadows = -Highlights (Example +50 and -50) works very well.
The Whites control sets the white clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
The Blacks control sets the black clipping point, which you can see by holding down the ALT key as you move the slider. Adjust it to the point where you see clipping appear with the ALT key.
Now go back and adjust the Contrast control to establish the best midtone contrast
If necessary “touch-up” the controls using the same top-down workflow.
If the issue persists I suggest Exporting an image to DNG file format with the settings that exhibit the issue and post it to Dropbox or other file download site.

Edit Disable Panel Grid Alignment does not affect the Positionin​g of Front Panel Labels

Similar Messages

Maybe you are looking for

Edit Disable Panel Grid Alignment does not affect the Positioning of Front Panel Labels