Edit Effect Panel not working after reinstalling PSE 9
How can I get my Edit Effect panel to work again? It stipped functioning after I had to reinstall my PSE 9.
Please provide more information.
In Editor, full Edit, Go to Window>check effects.
Just for drill, do the following:
Open blank file
Access horizontal type tool, type a word, commit
In the Effects palette, from the drop down, select drop shadows, highlight the High one, apply.
What happens?
Similar Messages
-
Effects Panel not working correctly
I have Windows 7 64 bit, Home Premium and using PSE9. When I open PSE in Full Edit and go to the Effects Panel, the Filters work just fine, but the Layer Styles will not open (or show anything) and the Photo Effects will not open ( or show anything). I did rename the MediaDatabase.db3 file as MediaDatabase.old, following instructions given in a PSE9 class I am taking....but have done nothing else with that file, and then is now a new MediaDatabase.db3 file under the "old" listing....so two files there.
I have no idea what to do to correct this....and I did close everything and close PSE and also my PC...let them rest a while, and then restarted the PC and reopened PSE9, and still the Layer Styles and Photo effects did not work. I hope someone can understand my problem and help....in simple "baby steps". ThanksShould I delete the file named mediaDatabase.old? I am a senior
"dummie" and just want to be sure what you are telling me.
I did delete the editor's pref files....I understand that one.
Thanks for your help. -
Safari not working after reinstall
Hi there,
I had issues with my Safari (it woudn't start after the new upgrade), so I had to reinstall it (had to use AppDelete). The reinstallation worked fine, the program now starts (it used to get stuck at the beginning, with the icon bouncing on the dock and doing nothing), but now the browser doesen't seem to go on the internet anymore. All it does is waiting and timing out. Chrome,Opera and Firefox are working just fine. I am guessing the problem is the new installation, how can I fix this? I'm on the latest version of Lion, latest version of Safari downloaded from the official Apple site.
Thanks in advanceIt is not very clear what you did, therefore difficult to recommend something. I understand you upgraded from SL to Lion, and Safari did not work AFTER that upgrade? Strange, does not seem plausible. Or what other upgrade did you do? Safari is a component of the system, and should NEVER be deleted via AppDelete or any other similar app.
As I do not know what you exactly did, I would recommend to download the 10.7.2 combo update (a dmg, around 1 GB), reinstall it as a separate download. After restart, all should be again fine.
How did you reinstall Safari after deleting it with AppDelete? You write ‘The reinstallation worked fine’, could you clarify what you did? -
Premiere Elements 12 Effects-Panel not working
Hi there!
I've recently updated to Elements 12 (from 10) and I am more or less happy, but since today, I can't use the effects-panel anymore. When I click any effect, the options won't pop up (see attached screenshot).
Does anyone know what to do?
I'm running the latest version of OS X and Premiere Elements.
All the best!kekskerl
It seems that you have made some progress. Please compare the first screenshot, apparently before uninstall/restall. Note that all you get for Color is Hue. Whereas, in the second screenshot, apparently after uninstall/reinstall, you now have Color with Hue, Lightness, Saturation, and Vibrance.
And, your screenshot of fx Effects/Generate/Lens Flare shows just one effect which what is to be expected. There is only one choice there. Are you saying that you cannot apply that effect to your clip?
Baseline questions.
Premiere Elements 12. Have you switched from 12 to the 12.1 Update via the program's Help Menu/Updates? If not, please do so.
Are you working in the Expert workspace or Quick workspace of the program? The answer to that might cut down on the expectations.
The Quick workspace has less choices under Adjust than the Expert. Compare
Quick workspace
Smart Fix
Auto Smart Tone
Color
Lighting
Temperature and Tint
Expert workspace
Smart Fix
Auto Smart Tone
Color
Color (RGB)
Gamma Correction
Lighting
Temperature and Tint
Volume
Balance
Treble
Bass
Audio
Gain
It is well known the Premiere Elements Mac does not have all the effects of Premiere Elements Windows, but I do not think this is a Mac Windows matter. But, SG is a Mac user and can confirm that possible aspect of the matter.
This is what I am suggesting
After updating from 12 to 12.1
1. Delete the Premiere Elements 12 Mac Settings File.
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements. html
or
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html (Section numbered 3).
SG can give us some guidance on this if you have problems doing this.
2. If that does work, then I would suggest deactivation (Sign Out) of the program, followed by uninstall, ccleaner run through (regular cleaner and registry cleaner), reinstall.
https://www.piriform.com/mac/ccleaner
By the way, do you have QuickTime installed on your computer; running program Run As Adminstrator and from User Account with Administrative Privileges? Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
How long did you work with Premiere Elements 12 before you saw this problem...the very start, never worked or it worked for a while but then did not work?
We will be watching for further details.
Thank you.
ATR -
[Solved (kind of)] Suspend not working after reinstall
Hi folks.
I did a reinstall 2 days ago and since then suspend / resume after a suspend to ram is not working. (Thinkpad x200)
As a desktop i use kde4, i also tried a dbus suspend and a pm-suspend without any X running.
Following happens using arch kernel:
- suspend is initiated and it immediately resumes;
Following happens when using my own kernel + config:
- suspend works (moon led starts blinking and finally the fan stops and the moon is the only led shining)
- after i open the lid or press the power button resume starts but the moon led is aktive, only the cpu fan starts running;
unfortunately i don't know how to log this process, as the display is not working and there's no log available of the resume process.
my rc.conf starts following daemons/programs:
metalog dbus thinkfan sshd
Thanks for any suggestions.
Last edited by gaelic (2011-02-14 11:58:06)Hey.
I add some information from the log files. State is unchanged. Both with slef baked kernel and arch kernel resume is not working
/var/log/pm-suspend.log:
Initial commandline parameters:
Sun Feb 13 12:19:46 CET 2011: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux angus 2.6.38-rc4 #11 SMP PREEMPT Sat Feb 12 17:37:33 CET 2011 i686 Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz GenuineIntel GNU/Linux
Module Size Used by
snd_hda_codec_conexant 29924 1
snd_hda_intel 17032 0
snd_hda_codec 47104 2 snd_hda_codec_conexant,snd_hda_intel
snd_pcm 48808 2 snd_hda_intel,snd_hda_codec
thinkpad_acpi 42892 0
iwlagn 130552 0
e1000e 107988 0
btusb 8568 0
snd_timer 13164 1 snd_pcm
cdc_acm 12256 0
snd_page_alloc 4876 2 snd_hda_intel,snd_pcm
total used free shared buffers cached
Mem: 3069852 363876 2705976 0 684 309004
-/+ buffers/cache: 54188 3015664
Swap: 2000088 0 2000088
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/bios_version: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/bios_vendor: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/bios_date: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/sys_vendor: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/product_name: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/product_version: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/board_name: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/board_version: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/board_vendor: No such file or directory
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun Feb 13 12:19:46 CET 2011: performing suspend
So suspend seems to be working, at least i can't see any problem.
dmesg (with pm-debug activated):
7>PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Simple Boot Flag at 0x35 set to 0x1
PM: Adding info for No Bus:mcelog
PM: Adding info for No Bus:msr0
PM: Adding info for No Bus:msr1
PM: Adding info for No Bus:cpu0
PM: Adding info for No Bus:cpu1
apm: BIOS not found.
PM: Adding info for No Bus:snapshot
PM: Adding info for event_source:cpu
PM: Adding info for event_source:breakpoint
PM: Adding info for event_source:software
highmem bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.30 [Flags: R/W].
PM: Adding info for No Bus:autofs
fuse init (API version 7.16)
PM: Adding info for No Bus:fuse
PM: Adding info for No Bus:btrfs-control
Btrfs loaded
msgmni has been set to 1710
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
PM: Adding info for pci_express:0000:00:1c.0:pcie08
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
PM: Adding info for pci_express:0000:00:1c.1:pcie08
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
PM: Adding info for pci_express:0000:00:1c.3:pcie08
PM: Adding info for No Bus:fbcon
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
PM: Adding info for No Bus:AC
ACPI: AC Adapter [AC] (off-line)
PM: Adding info for No Bus:input0
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
PM: Adding info for No Bus:input1
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
PM: Adding info for No Bus:input2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
PM: Adding info for No Bus:cooling_device0
PM: Adding info for No Bus:cooling_device1
PM: Adding info for No Bus:thermal_zone0
PM: Adding info for No Bus:hwmon0
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (44 C)
PM: Adding info for No Bus:thermal_zone1
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (40 C)
PM: Adding info for No Bus:ptmx
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
PM: Adding info for No Bus:ttyS0
PM: Adding info for No Bus:BAT0
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
PM: Adding info for No Bus:nvram
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
PM: Adding info for No Bus:agpgart
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
PM: Adding info for No Bus:controlD64
PM: Adding info for No Bus:card0
PM: Adding info for i2c:i2c-0
PM: Adding info for i2c:i2c-1
PM: Adding info for i2c:i2c-2
PM: Adding info for i2c:i2c-3
PM: Adding info for i2c:i2c-4
PM: Adding info for i2c:i2c-5
PM: Adding info for i2c:i2c-6
PM: Adding info for i2c:i2c-7
PM: Adding info for i2c:i2c-8
PM: Adding info for i2c:i2c-9
PM: Adding info for i2c:i2c-10
PM: Adding info for i2c:i2c-11
PM: Adding info for i2c:i2c-12
PM: Adding info for i2c:i2c-13
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
PM: Adding info for No Bus:card0-LVDS-1
PM: Adding info for No Bus:card0-VGA-1
PM: Adding info for i2c:i2c-14
PM: Removing info for i2c:i2c-14
PM: Adding info for No Bus:card0-HDMI-A-1
PM: Adding info for No Bus:card0-DP-1
PM: Adding info for i2c:i2c-14
PM: Adding info for i2c:i2c-15
PM: Removing info for i2c:i2c-15
PM: Adding info for No Bus:card0-HDMI-A-2
PM: Adding info for No Bus:card0-DP-2
PM: Adding info for i2c:i2c-15
PM: Adding info for No Bus:card0-DP-3
PM: Adding info for i2c:i2c-16
PM: Adding info for No Bus:fb0
PM: Adding info for No Bus:vtcon1
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
PM: Adding info for No Bus:7:0
PM: Adding info for No Bus:loop0
PM: Adding info for No Bus:7:1
PM: Adding info for No Bus:loop1
PM: Adding info for No Bus:7:2
PM: Adding info for No Bus:loop2
PM: Adding info for No Bus:7:3
PM: Adding info for No Bus:loop3
PM: Adding info for No Bus:7:4
PM: Adding info for No Bus:loop4
PM: Adding info for No Bus:7:5
PM: Adding info for No Bus:loop5
PM: Adding info for No Bus:7:6
PM: Adding info for No Bus:loop6
PM: Adding info for No Bus:7:7
PM: Adding info for No Bus:loop7
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
PM: Adding info for No Bus:ata1
PM: Adding info for No Bus:ata1
PM: Adding info for No Bus:link1
PM: Adding info for No Bus:link1
PM: Adding info for No Bus:dev1.0
PM: Adding info for No Bus:dev1.0
PM: Adding info for No Bus:ata2
PM: Adding info for No Bus:ata2
PM: Adding info for No Bus:link2
PM: Adding info for No Bus:link2
PM: Adding info for No Bus:dev2.0
PM: Adding info for No Bus:dev2.0
PM: Adding info for No Bus:ata3
PM: Adding info for No Bus:ata3
PM: Adding info for No Bus:link3
PM: Adding info for No Bus:link3
PM: Adding info for No Bus:dev3.0
PM: Adding info for No Bus:dev3.0
PM: Adding info for No Bus:ata4
PM: Adding info for No Bus:ata4
PM: Adding info for No Bus:link4
PM: Adding info for No Bus:link4
PM: Adding info for No Bus:dev4.0
PM: Adding info for No Bus:dev4.0
scsi0 : ahci
PM: Adding info for scsi:host0
PM: Adding info for No Bus:host0
scsi1 : ahci
PM: Adding info for scsi:host1
PM: Adding info for No Bus:host1
scsi2 : ahci
PM: Adding info for scsi:host2
PM: Adding info for No Bus:host2
scsi3 : ahci
PM: Adding info for scsi:host3
PM: Adding info for No Bus:host3
ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 44
ata3: DUMMY
ata4: DUMMY
PPP generic driver version 2.4.2
PM: Adding info for No Bus:ppp
PPP Deflate Compression module registered
PPP BSD Compression module registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
PM: Adding info for usb:usb1
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev1.1
PM: Adding info for No Bus:ep_00
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
PM: Adding info for usb:usb2
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.1
PM: Adding info for No Bus:ep_00
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
PM: Adding info for usb:usb3
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev3.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
PM: Adding info for usb:usb4
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev4.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
PM: Adding info for usb:usb5
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev5.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
PM: Adding info for usb:usb6
PM: Adding info for usb:6-0:1.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev6.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
PM: Adding info for usb:usb7
PM: Adding info for usb:7-0:1.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev7.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
PM: Adding info for usb:usb8
PM: Adding info for usb:8-0:1.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev8.1
PM: Adding info for No Bus:ep_00
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio0
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio1
PM: Adding info for No Bus:mice
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
PM: Adding info for No Bus:psaux
mousedev: PS/2 mouse device common for all mice
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:event1
PM: Adding info for No Bus:event2
ata1.00: ATA-8: HITACHI HTS543225L9SA00, FBEZC43C, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
rtc_cmos 00:07: RTC can wake from S4
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54322 FBEZ PQ: 0 ANSI: 5
PM: Adding info for scsi:target0:0:0
PM: Adding info for No Bus:rtc0
PM: Adding info for scsi:0:0:0:0
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
PM: Adding info for No Bus:i2c-0
PM: Adding info for No Bus:i2c-1
PM: Adding info for No Bus:i2c-2
PM: Adding info for No Bus:i2c-3
PM: Adding info for No Bus:i2c-4
PM: Adding info for No Bus:i2c-5
PM: Adding info for No Bus:i2c-6
PM: Adding info for No Bus:i2c-7
PM: Adding info for No Bus:i2c-8
PM: Adding info for No Bus:i2c-9
PM: Adding info for No Bus:i2c-10
PM: Adding info for No Bus:i2c-11
PM: Adding info for No Bus:i2c-12
PM: Adding info for No Bus:i2c-13
PM: Adding info for No Bus:i2c-14
PM: Adding info for No Bus:i2c-15
PM: Adding info for No Bus:i2c-16
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PM: Adding info for i2c:i2c-17
PM: Adding info for No Bus:i2c-17
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
PM: Adding info for platform:coretemp.0
PM: Adding info for No Bus:hwmon1
PM: Adding info for platform:coretemp.1
PM: Adding info for No Bus:input3
PM: Adding info for No Bus:0:0:0:0
PM: Adding info for No Bus:hwmon2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
PM: Adding info for No Bus:0:0:0:0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:8:0
PM: Adding info for No Bus:sg0
PM: Adding info for No Bus:sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
PM: Adding info for No Bus:0:0:0:0
cpuidle: using governor ladder
PM: Adding info for No Bus:event3
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
sda: sda1 sda2 sda3 sda4
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
PM: Adding info for No Bus:sda4
ALSA device list:
sd 0:0:0:0: [sda] Attached SCSI disk
No soundcards found.
IPv4 over IPv4 tunneling driver
PM: Adding info for No Bus:tunl0
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
PM: Hibernation image not present or could not be loaded.
Magic number: 15:387:327
rtc_cmos 00:07: setting system clock to 2011-02-13 11:20:29 UTC (1297596029)
usb 2-4: new high speed USB device using ehci_hcd and address 2
PM: Adding info for usb:2-4
PM: Adding info for usb:2-4:1.0
PM: Adding info for usb:2-4:1.1
PM: Adding info for No Bus:ep_8a
PM: Adding info for usb:2-4:1.2
PM: Adding info for No Bus:ep_01
PM: Adding info for No Bus:ep_81
PM: Adding info for usb:2-4:1.3
PM: Adding info for No Bus:ep_89
PM: Adding info for usb:2-4:1.4
PM: Adding info for No Bus:ep_02
PM: Adding info for No Bus:ep_82
PM: Adding info for usb:2-4:1.5
PM: Adding info for No Bus:ep_8b
PM: Adding info for usb:2-4:1.6
PM: Adding info for No Bus:ep_8c
PM: Adding info for usb:2-4:1.7
PM: Adding info for No Bus:ep_87
PM: Adding info for usb:2-4:1.8
PM: Adding info for usb:2-4:1.9
PM: Adding info for No Bus:ep_85
PM: Adding info for usb:2-4:1.10
PM: Adding info for No Bus:ep_06
PM: Adding info for No Bus:ep_86
PM: Adding info for No Bus:usbdev2.2
PM: Adding info for No Bus:ep_00
IBM TrackPoint firmware: 0x0e, buttons: 3/3
PM: Adding info for No Bus:input4
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4
PM: Adding info for No Bus:mouse0
PM: Adding info for No Bus:event4
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 4-2: new full speed USB device using uhci_hcd and address 2
UDF-fs: No partition found (1)
device label root devid 1 transid 1893 /dev/root
PM: Adding info for No Bus:btrfs-1
PM: Adding info for usb:4-2
PM: Adding info for usb:4-2:1.0
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_82
PM: Adding info for No Bus:ep_02
PM: Adding info for usb:4-2:1.1
PM: Adding info for No Bus:ep_83
PM: Adding info for No Bus:ep_03
PM: Adding info for usb:4-2:1.2
PM: Adding info for No Bus:ep_84
PM: Adding info for No Bus:ep_04
PM: Adding info for usb:4-2:1.3
PM: Adding info for No Bus:usbdev4.2
PM: Adding info for No Bus:ep_00
VFS: Mounted root (btrfs filesystem) readonly on device 0:10.
Freeing unused kernel memory: 352k freed
Write protecting the kernel text: 5504k
Write protecting the kernel read-only data: 1012k
udev[965]: starting version 165
Bluetooth: Generic Bluetooth USB driver ver 0.6
PM: Adding info for No Bus:hci0
PM: Adding info for No Bus:rfkill0
usbcore: registered new interface driver btusb
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
iwlagn 0000:03:00.0: Device SKU: 0Xb
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 46 for MSI/MSI-X
PM: Adding info for No Bus:0000:03:00.0
cdc_acm 2-4:1.1: ttyACM0: USB ACM device
PM: Adding info for No Bus:ttyACM0
cdc_acm 2-4:1.3: ttyACM1: USB ACM device
PM: Adding info for No Bus:ttyACM1
cdc_acm 2-4:1.9: ttyACM2: USB ACM device
PM: Adding info for No Bus:ttyACM2
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
thinkpad_acpi: Lenovo ThinkPad X200, model 7458Y11
PM: Adding info for platform:thinkpad_acpi
PM: Adding info for platform:thinkpad_hwmon
PM: Adding info for No Bus:hwmon3
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
PM: Adding info for No Bus:rfkill1
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
PM: Adding info for No Bus:rfkill2
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
PM: Adding info for No Bus:tpacpi::thinklight
Registered led device: tpacpi::thinklight
PM: Adding info for No Bus:tpacpi::power
Registered led device: tpacpi::power
PM: Adding info for No Bus:tpacpi::standby
Registered led device: tpacpi::standby
PM: Adding info for No Bus:tpacpi::thinkvantage
Registered led device: tpacpi::thinkvantage
PM: Adding info for No Bus:thinkpad_screen
PM: Adding info for No Bus:card29
PM: Adding info for No Bus:controlC29
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
PM: Adding info for No Bus:input5
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
PM: Adding info for No Bus:event5
PM: Removing info for No Bus:0000:03:00.0
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
PM: Adding info for No Bus:phy0
PM: Adding info for No Bus:rfkill3
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
PM: Adding info for No Bus:wlan0
PM: Adding info for No Bus:timer
PM: Adding info for No Bus:eth0
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:09:3e:a6
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
PM: Adding info for No Bus:card0
PM: Adding info for No Bus:pcmC0D1p
PM: Adding info for No Bus:pcmC0D0p
PM: Adding info for No Bus:pcmC0D0c
PM: Adding info for No Bus:controlC0
device label data devid 1 transid 59471 /dev/sda4
PM: Adding info for No Bus:btrfs-2
device label data devid 1 transid 59471 /dev/sda4
Adding 2000088k swap on /dev/sda2. Priority:-1 extents:1 across:2000088k
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Adding info for No Bus:vcs12
PM: Adding info for No Bus:vcsa12
PM: Adding info for No Bus:vcs13
PM: Adding info for No Bus:vcsa13
PM: Adding info for No Bus:vcs14
PM: Adding info for No Bus:vcsa14
PM: Adding info for No Bus:vcs15
PM: Adding info for No Bus:vcsa15
PM: Adding info for No Bus:vcs16
PM: Adding info for No Bus:vcsa16
PM: Adding info for No Bus:vcs17
PM: Adding info for No Bus:vcsa17
PM: Adding info for No Bus:vcs18
PM: Adding info for No Bus:vcsa18
PM: Adding info for No Bus:vcs19
PM: Adding info for No Bus:vcsa19
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs20
PM: Adding info for No Bus:vcsa20
PM: Adding info for No Bus:vcs21
PM: Adding info for No Bus:vcsa21
PM: Adding info for No Bus:vcs22
PM: Adding info for No Bus:vcsa22
PM: Adding info for No Bus:vcs23
PM: Adding info for No Bus:vcsa23
PM: Adding info for No Bus:vcs24
PM: Adding info for No Bus:vcsa24
PM: Adding info for No Bus:vcs25
PM: Adding info for No Bus:vcsa25
PM: Adding info for No Bus:vcs26
PM: Adding info for No Bus:vcsa26
PM: Adding info for No Bus:vcs27
PM: Adding info for No Bus:vcsa27
PM: Adding info for No Bus:vcs28
PM: Adding info for No Bus:vcsa28
PM: Adding info for No Bus:vcs29
PM: Adding info for No Bus:vcsa29
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs30
PM: Adding info for No Bus:vcsa30
PM: Adding info for No Bus:vcs31
PM: Adding info for No Bus:vcsa31
PM: Adding info for No Bus:vcs32
PM: Adding info for No Bus:vcsa32
PM: Adding info for No Bus:vcs33
PM: Adding info for No Bus:vcsa33
PM: Adding info for No Bus:vcs34
PM: Adding info for No Bus:vcsa34
PM: Adding info for No Bus:vcs35
PM: Adding info for No Bus:vcsa35
PM: Adding info for No Bus:vcs36
PM: Adding info for No Bus:vcsa36
PM: Adding info for No Bus:vcs37
PM: Adding info for No Bus:vcsa37
PM: Adding info for No Bus:vcs38
PM: Adding info for No Bus:vcsa38
PM: Adding info for No Bus:vcs39
PM: Adding info for No Bus:vcsa39
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs40
PM: Adding info for No Bus:vcsa40
PM: Adding info for No Bus:vcs41
PM: Adding info for No Bus:vcsa41
PM: Adding info for No Bus:vcs42
PM: Adding info for No Bus:vcsa42
PM: Adding info for No Bus:vcs43
PM: Adding info for No Bus:vcsa43
PM: Adding info for No Bus:vcs44
PM: Adding info for No Bus:vcsa44
PM: Adding info for No Bus:vcs45
PM: Adding info for No Bus:vcsa45
PM: Adding info for No Bus:vcs46
PM: Adding info for No Bus:vcsa46
PM: Adding info for No Bus:vcs47
PM: Adding info for No Bus:vcsa47
PM: Adding info for No Bus:vcs48
PM: Adding info for No Bus:vcsa48
PM: Adding info for No Bus:vcs49
PM: Adding info for No Bus:vcsa49
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs50
PM: Adding info for No Bus:vcsa50
PM: Adding info for No Bus:vcs51
PM: Adding info for No Bus:vcsa51
PM: Adding info for No Bus:vcs52
PM: Adding info for No Bus:vcsa52
PM: Adding info for No Bus:vcs53
PM: Adding info for No Bus:vcsa53
PM: Adding info for No Bus:vcs54
PM: Adding info for No Bus:vcsa54
PM: Adding info for No Bus:vcs55
PM: Adding info for No Bus:vcsa55
PM: Adding info for No Bus:vcs56
PM: Adding info for No Bus:vcsa56
PM: Adding info for No Bus:vcs57
PM: Adding info for No Bus:vcsa57
PM: Adding info for No Bus:vcs58
PM: Adding info for No Bus:vcsa58
PM: Adding info for No Bus:vcs59
PM: Adding info for No Bus:vcsa59
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Adding info for No Bus:vcs60
PM: Adding info for No Bus:vcsa60
PM: Adding info for No Bus:vcs61
PM: Adding info for No Bus:vcsa61
PM: Adding info for No Bus:vcs62
PM: Adding info for No Bus:vcsa62
PM: Adding info for No Bus:vcs63
PM: Adding info for No Bus:vcsa63
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
wlan0: authenticate with 00:25:9c:3c:4d:5c (try 1)
wlan0: authenticated
wlan0: associate with 00:25:9c:3c:4d:5c (try 1)
wlan0: RX AssocResp from 00:25:9c:3c:4d:5c (capab=0x411 status=0 aid=2)
wlan0: associated
start_kdeinit (1748): /proc/1748/oom_adj is deprecated, please use /proc/1748/oom_score_adj instead.
Are there any suggestions where i should go from here? (with the official arch kernel its exactly the same story, no difference in the logs) -
Photo Booth Not working after reinstalling my OS
A bunch of programs got stolen from me while I was connected to the internet. My whole CS, dreamweaver and photobooth of all apps. So I reinstalled my OS so that photobooth would be back on. Now when I open it its just a blank screen.. like my camera isnt working or something. Not even, there isnt even a black screen. Its just blank. It used to work somewhat when I reinstalled it but all the view modes for the camera looked wacked out. Can anyone help me to fix my photobooth?
palodoma wrote:
After upgrading my 24" iMac to 10.6.2, Photo Booth does not work.
The green light is ON but the Photo Booth window is just black. Built in isight is working with iChat.
The same happened after i upgraded my MBA.
Welcome to Discussions, palodoma !
Some other things you can try if necessary:
(1) Use Disk Utility to repair permissions, restart your Mac, and test whether the problem persists.
(2) Try all relevant suggestions from http://support.apple.com/kb/HT2090
(3) If you updated using your Macs' > Software Update... feature,
use Disk Utility to repair permissions. Then download and install the
Mac OS X v10.6.2 Update (Combo): http://support.apple.com/kb/DL959
Immediately after the restart that completes the update, repair permisssions again.
Then test whether your problem persists.
We will watch for your status update.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
Mail search function does not work after reinstalling
Hello!
I recently had to re-install Leopard on my MacBook Pro.
I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
All mails are present, and everything works great, apart from the fact that the search function does not work.
I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
What can I do about it ?It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
Thanks to leonie for some information contained in this. -
ICal Availability Panel Not Working After Installing Yosemite
The availability panel for my corporate calendar no longer works after installing Yosemite. I get a message that says "This calendar does not support availability." This was working before I installed Yosemite. Is there a configuration I need to change?
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
SA30 USB do not work after reinstall, please help!!
Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans -
Re: BIOMETRIC FINGER PRINT DEVICE ON MY HP PAVILION dv6 NOT WORKING AFTER REINSTALLING O/S
Hi Dragon-Fur,
Please my notebook
Product #: WC195PA#ACJ
Product Name: HP Pavilion dv6 Notebook PC
Model: dv6-1337TX
SERIAL: [Personal Information Removed]
CAN U PLEASE HELP ME ABOUT THIS LAPTOP.
THANX IN ADVANCE.Avi007
Welcome to the HP Community Forum.
I have created a new Post of your own for you -- the previous Thread was unrelated to your inquiry in many ways; the Thread is no longer active.
Because you originally tagged onto someone else's Thread, it is difficult to discern whether you have indeed just reinstalled the Operating System on your system OR whether you have just picked a Post that sounded similar and added to it. To some extent, the details make the difference.
Hopefully you still have your Digital Persona Software; I do not find a replacement copy of the software in your Notebook's support pages -- I recommend you think carefully before removing your existing software. Check your Recovery Manager for the original software that was installed on your system -- the software may be available there.
The following applies to Windows 7:
Your Notebook's Support Pages:
HP Pavilion dv6-1337tx Entertainment Notebook PC Drivers
Your Validity Sensor Driver
sp45050 Validity Fingerprint Sensor V2.1.0.2.A
Please see the following Dragon Document for help to reinstall your Digital Persona software:
Instructions to Update Digital Persona
Please understand that I have not used this Software in years -- the document is provided "As Is" and without guarantee.
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
Sound not working after reinstall
I have a Toshiba Tecra A8514 and I had to re-install my windows XP and since then my audio is not working, I have tried to install the audio driver on the site but that didnt work, any help on the matter would be great.
So you installed this driver without success.
Realtek HD Audio Driver for Windows XP
My guess is that you did not install in the correct order. You might want to start over. It's important to install the chipset software followed by the display driver before any other driver.
--------------------8<------------------- <snip> ------------------
Install them in this order. Restart after each driver and take the time to test between drivers. Some will apply and some won't.
Chipset software
Display driver
Sound driver
Modem Driver
If your machine has the internal WiFi card, then install the WLAN driver
ACPI Common Modules
Toshiba Console
Display Hotkey utility
Touchpad Driver
Toshiba Power Saver Utility
Toshiba Controls
Toshiba Utilities
--------------------8<------------------- <snip> ------------------
I would restore the hard drive myself. All this stuff is correctly preinstalled. Replacement media can be ordered by calling Toshiba Customer Service at 800-457-7777. Have the computer's serial number and a credit card handy.
-Jerry -
Could not install windows 10 and not working after reinstall of 8
have anyone had problem with upgrading to windows 10, tried to and failed and then restore to 8 never worked now machine not working???
Hi:
I'm thinking you need this software...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-91100-1&cc=us&dlc=en&lc=en&...=
Paul -
"Edit in Photoshop" not working after 3.3 update...
It seems as though after updating to version 3.3, my "edit in photoshop" functionality has stopped working. When I choose this option, Photoshop will open, but Lightroom does not bring up a dialog for exporting the photo, nor do I see a progress bar in lightroom for exporting of the photo as I used to.
I can (and have) create a user preset for exporting to accomplish the same functionality, but has anyone else experienced this problem? is there a quick fix?Sorry, I did not get it before that PS opens but no image.
Well, LR 3.3 and CS3 are not fully compatible indofar as CS3 cannot open a RAW image that has been rendered with the new ACR of LR3.
It was still possible under LR 3.2 - I've done it nuemerous times, but was told on this forum that this was only due to a "bug" that had been "fixed" in LR 3.3.
I now have CS5 but still have CS3 installed.
When I try to open a RAW image from LR 3.3 with CS3 all what happens is that LR renders a TIFF (my specification for Additional External Editor) but CS3 does not open.
So, maybe you have to bite the bullet and upgrade to CS5.
Or, export your Raw Image as a psd and then open it from CS3.
WW -
MS-SQL + JDBCAdapter.java Error (Not working after reinstall)
Hi,
I searched for this, but never found a message that really matched.
My development computer's HD crashed, and the backup that worked the week before failed too. I reinstalled MS-SQL using default or logical values, re-attached the DBs I had been using, reinstalled JCreator V3.50 and reinstalled JDK, but this time instead of 1.40 I installed 1.50 (version 5). I'm not sure if that is the source of the problem or not.
I run an IBM laptop T-42 with Windows XP Pro. I am just working locally, so there is no network, which means there is no Domain to add to the user name. This appeared somewhere in what follows (I forget at 2:15am), but I couldn't find a way to add a placeholder domain...
The java files (which worked just fine before) now fail to execute (compile works), and the error message I see follows:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at edu.washington.fammed.quest.wedgConnect.getConnection(wedgConnect.java:262)
at edu.washington.fammed.quest.wedgConnect.openDB(wedgConnect.java:206)
at edu.washington.fammed.quest.mmtxClassifier.initConn(mmtxClassifier.java:267)
at mqafQuestionClassifier.main(mqafQuestionClassifier.java:1053)
Class mqafQuestionClassifier creates a wedgConnect object which is based on the class Connect, which is a copy of the JDBCAdapter class.
Class wedgConnect uses the same code as JDBCAdapter, with changes to use local vars so I can see them with the dump command when I am debugging.
I've tried debugging to step through the code, but it won't let me "Step Into" deep enough to find out what happens. I get into DriverManager, but cannot get any meaningful data once I get there.
I cannot find a way to get an error number/message that is meaningful. (I am a self-taught Java programmer, took classes, but admit I lack good debugging skills.)
It looked to me to be a userName/password problem, so that is what I focused on.
I tried opening the SQL Server Enterprise Manager, right-clicking on the (local) (Windows NT) server to bring up the Properties dialog, going to Security tab and changing the Authentication to SQL Server AND Windows, as opposed to Windows only. >> FAILED.
I tried using the SQL Server Enterprise Manager "Security" >> Logins by creating a new one so I knew the password >> FAILED>
I tried using name="sa", pw=[known pw] >> FAILED.
All other known SQL Login names/pws >> FAILED.
I tried creating a User in the DB I want to use, with known name/pw >> FAILED. (That name/pw should have been irrelevant, but I was getting desperate.)
I tried using name=[Windows Login User Name], pw=[Windows Login User PW] >> FAILED.
I have tried just about everything I could think of, nothing works.
Does anyone have any suggestions?
Thanks,
Jeff
P.S. As always I am facing a deadline that makes me nervous (and working at after 2 am). Please help me.Hi,
I searched for this, but never found a message that really matched.
My development computer's HD crashed, and the backup that worked the week before failed too. I reinstalled MS-SQL using default or logical values, re-attached the DBs I had been using, reinstalled JCreator V3.50 and reinstalled JDK, but this time instead of 1.40 I installed 1.50 (version 5). I'm not sure if that is the source of the problem or not.
I run an IBM laptop T-42 with Windows XP Pro. I am just working locally, so there is no network, which means there is no Domain to add to the user name. This appeared somewhere in what follows (I forget at 2:15am), but I couldn't find a way to add a placeholder domain...
The java files (which worked just fine before) now fail to execute (compile works), and the error message I see follows:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at edu.washington.fammed.quest.wedgConnect.getConnection(wedgConnect.java:262)
at edu.washington.fammed.quest.wedgConnect.openDB(wedgConnect.java:206)
at edu.washington.fammed.quest.mmtxClassifier.initConn(mmtxClassifier.java:267)
at mqafQuestionClassifier.main(mqafQuestionClassifier.java:1053)
Class mqafQuestionClassifier creates a wedgConnect object which is based on the class Connect, which is a copy of the JDBCAdapter class.
Class wedgConnect uses the same code as JDBCAdapter, with changes to use local vars so I can see them with the dump command when I am debugging.
I've tried debugging to step through the code, but it won't let me "Step Into" deep enough to find out what happens. I get into DriverManager, but cannot get any meaningful data once I get there.
I cannot find a way to get an error number/message that is meaningful. (I am a self-taught Java programmer, took classes, but admit I lack good debugging skills.)
It looked to me to be a userName/password problem, so that is what I focused on.
I tried opening the SQL Server Enterprise Manager, right-clicking on the (local) (Windows NT) server to bring up the Properties dialog, going to Security tab and changing the Authentication to SQL Server AND Windows, as opposed to Windows only. >> FAILED.
I tried using the SQL Server Enterprise Manager "Security" >> Logins by creating a new one so I knew the password >> FAILED>
I tried using name="sa", pw=[known pw] >> FAILED.
All other known SQL Login names/pws >> FAILED.
I tried creating a User in the DB I want to use, with known name/pw >> FAILED. (That name/pw should have been irrelevant, but I was getting desperate.)
I tried using name=[Windows Login User Name], pw=[Windows Login User PW] >> FAILED.
I have tried just about everything I could think of, nothing works.
Does anyone have any suggestions?
Thanks,
Jeff
P.S. As always I am facing a deadline that makes me nervous (and working at after 2 am). Please help me. -
Compressor 3 not working after reinstall of FCS2
Hello
I'm having trouble with FCS 2 Compressor and Motion. My system was running a little slow so I did a uninstall using App Zapper to remove the suite. The installation went fine however when I tried to launch compressor it would quit before the splash screen comes up every time. He's what puzzles me the most I download the latest update to the suite and Compressor and Motion is not registering at all. It said Motion must be install I get the same message with Compressor also. Yet I can launch Motion and use it. Any ideals? I did a reinstall twice and even reinstalled , FCS1 then upgraded to FCS2 and compressor won't work on FCS1 either. Can someone direct me what to do or what software to get a clean uninstall. Everything works but Compressor. Have to get back to work will check later this morning.
LeeI"m having the exact same problem... and from reading in forums the only idea is to re-install my OS. Backing up my Hard drive and updating is going to take a day - i'm not impressed with this idea.
Wondering if you have solved this issue or has anyone else.
Again the problem: Everything in FCP studio 2 works except Compressor. At first it wouldn't submit to Batch and NOW afterre-install attempts it won't even open gives the error:
Link (dyld) error:
Symbol not found: __ZN6aecore14CMovieInstance13startTimecodeEv
Referenced from: /Library/Frameworks/Compressor.framework/Versions/A/Frameworks/StompTypes.frame work/Versions/A/StompTypes
Expected in: /Library/Frameworks/AECore.framework/Versions/A/AECore
Yah, I removed those files as per instructions on Apple's support page, assuming that a re-install would put them back.
If you pay this much for software you should be able to open it NO?
Appreciate any help from all you other frustrated Mac Lovers. I too am a devoted fan, but wish they would someday achieve perfection.
Message was edited by: Host
Maybe you are looking for
-
Java.sql.SQLException: Login failed for user 'ccms'.
Windows Server 2003 R2 Enterprise x64 Edition service pack 1 SQL Server 2000 Enterprise edition 32 bit, SP4 : 2000.8.00.2039 jdbc driver: jtds connection string: jdbc:jtdsqlserver://ZH-DATA-4:1434/[dbname];instance=[instance name] the connectivity wo
-
Resultset returns null while calling a DB2 stored procedure using hibernat
Hi All , I am trying to call a db2 stored proc with cursor open from my java code but it always returns me null results though it executes fine when I call the procedure from the command line Java code.................... CallableStatement stmt3 = Ey
-
Are there any sites where you can download zipped .band files?
I know there are demo song downloads around, but I'm looking for any site that has collections of zipped .band files of public domain song arrangements, free or not. If there aren't any, there should be. I would love to be able to download, and play
-
let me ask you all something about "Append mode" of cs6, cc & cc2014 project file in order to insert multiple xml sequence which is sent from 3rd-party tool into specific project file . Finalcut pro 7 & x was supported this , but i am not sure wi
-
How do I find out what the brand and exact specs of my x300's solid state drive are. The only thing I know is that it's 64 GB. I'd like to replace the SSD with a bigger size SSD. For that I'd like to know its size and power restrictions and so on. Is