Edit End of Movie

I have project that reads 1:45:33. This was the intial amount when I started the project. After editing the time is 1:44:53. The music stops and that point and the last clip is a still. There is a blank minute that I can't delete. I want the movie to stop at 1:44:33. Any suggestions?

Hi, Allen,
If Matti's excellent suggestion doesn't seem to work, and you are finished with all your editing, you could save the movie as a QuickTime Full Stream movie. Then, open a new iMovie project, import the new QT movie into it and edit the end of the movie there. You can then make your chapter markers and go forward with making your DVD.
Just need to be sure you have enough free space to create another movie!

Similar Messages

Ending a movie in Premiere Elements 7

Premiere Elements 7:
How do I end my movie without the extra 10 minutes of blackspace that shows up everytime I render it?
My movie has video clips, slides, and transitions. I never put a formal ending on it, I just stopped dragging material into the sceneline. Once I render a 30 minute video, roughly 15 extra minutes of black space show up. How do I tell Premiere Elements 7 to end the movie?
Thanks,
Ben

I am stumped, as well, especially as PE doesn't allow one to "lock" a Track, or anything similar. It should be an easy process to select, and then delete the offending Clips. If the Lasso does not work, try Rt-clicking the Clip and choosing Clear (I think that is the proper syntax for deleting in PE and not storing the Clip in the Clipboard). If not Clear (the term in P-Pro, then look for Delete).
One observation that I have made, as to a possible cause for these tiny Clips, is that if one drags a Clip to abut to another Clip, with Snap On, and you drag too far (basically banging the moved Clip against the previous Clip), you can locate the moved Clip INTO the previous one, cutting of a frame, or two. These will then automatically go to the end of the Timeline, without any warning, or notification. Then, as you tighten things up on the Timeline they remain orphaned and can be quite a ways from the actual Clips, depending on how much editing one does. The trick is to drag the Clip (the one being moved) until you see the thick black line. It now butts up to the previous Clip. Let it go now and do not drag it into the previous Clip, or you'll get those orphans. Now, they *should* be easy to delete, if you remember to go looking for them. Always check the Time Code of your (intended) Clip with the Time Code for the Duration of your Timeline. They should match frame for frame. Otherwise, you've got an orphan problem.
Hunt

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Lost sound in some film clips when finishing project. Using iMovie 11, after adding music to photo section, could not get sound back in 2 film clips at end of movie. Beginning clips ok. How do I restore sound? Thx.

Everything in your project will be exported when you use the share menu.
If you want to export only half, I suggest that you
1) Select the project in the Project Library.
2) Click FILE/DUPLICATE PROJECT
3) Give the duplicate a name, like Project A snippet.
4) Open the duplicate project in the Project editor and delete the segments that you do not need.
5) Then Share.
You mentioned surrounding a portion of the clip you were editing in Yellow. Once you do this, you should right-click and then select either DELETE SELECTION, TRIM TO SELECTION, or one of the other options available. That is a key tool in editing.
You mentioned MPEG Streamclip. I agree that MPEG Streamclip is a great tool.

In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks

In "edit" mode, my movie speed is fine. Once published it seems to slow down and become all jerky. Any ideas? Thanks

I have a revision a imac g5 with the same problem with only macbreak podcast. I know leo laporte said that the podcast was done in 1080p and my computer with its built in 64 megabyte graphics card might have trouble with this podcast but your machine must have a better graphics card than mine. 1080p requires at least 128 megabytes of graphics memory built in. My machine played this podcast on quicktime fine until they came out with the update to quicktime last week or two ago. I was going to upgrade my memory until I came accross your story and your machines doing the same thing with much better specs. I think it might be the quicktime update that is causing a problem. Maybe Leo will talk about this problem since he is doing a mac show about macs.

How can I not "fade to Black" at end of Movie?

Hi experienced iMovie people,
Been searching for a while and still can't find an answer. I'm trying to end the movie with a "Title" and it still fades to back. I've tried cut, etc. which worked great on the opening "Title" where I wanted the screen to show the text but doesn't work at the end. You're welcome to see the movie at: http://AudioGirlProductions.com to see what I mean. It's right there on the Home Page.
Thanks,
Lori Rae

That can happen if the audio is longer than the movie. You need to crop the audio (not just fade it).

Jump to Slideshow at end of Movie?

Hi,
How do I do this with a chapter marker? i just simply want a DVDSP slideshow to play if a user presses a chapter forward button before the movie finishes.
TIA,
James

Figured it out. Just added a chapter marker to end of movie track and set track end jump to slideshow. Not at all difficult.

How to I add credits and slogans at end of movie

how to I add credits and slogans at end of movie? also an intro please

The title browser "T" under the imovie browser screen. Scrolling credits.

I am trying to edit a home movie on iMovies but when I try to download the movie from a dvd a message comes up saying there are no importable files. The DVD is the last in a series of 5 and the others have downloaded without any difficulty.Help?

I am trying to edit a home movie on iMovies on a mac book air. The movie is on a dvd but when I try to import the movie onto iMovies I get a message saying there are no importable files. I've downloaded the macx converter software but I can't seem to download the movie into that either.

Chris , thanks for the prompt reply. The dvd was produced by a third party that I found on line . I had a number of old mini digital video cassettes from a Sony Handycam. I can play the DVD's on my laptop but I can't edit them on iMovies to delete a lot of the rubbish on them. I have five DVD's and three downloaded without any problem but the last two are according to iMovies non importable.

Lost sound when end of movie reached

Hi All.
Have a slight dilemma here - Occasional - my apple TV will quit outputting any sound when I reach the end of a movie (either through fast forward / chapter scan forward / or normal play to end of movie).
I can tell there is no sound output because the receiver changes the display to tell me what channels are being passed to it - and the receiver says there are zero channels of sound. I also have the menu clicks turned on.
I've had the apple TV for about two months now - with the latest update installed. I am using composite video cables and optical audio to my Yamaha AV receiver (863) - then passing video only to the TV (Old 28" Sony Wega) via composite cables. The apple TV sits in a well ventilated position in my AV furniture (open to the air with no components above or below it).
This occurs for only some video - some video works fine. All video streaming has been encoded with HandBrake 0.9.3. All Video has the same audio / video settings, all video has chapters embedded.
I have made a change in my streaming recently - I moved itunes + all content to a Windows Home Server (HP EX-490) - this is the only change from my previous streaming (which never showed this problem).
Once the sound issue appears and the apple tv quits outputting sound to the receiver - no sound is available - however - I can continue to stream video / audio and everything appears to play fine - with the exception of no sound. To rectify the problem - I have to unplug the apple tv for 5-10 seconds - plug it back in - and sound output has returned (I haven't tried the Menu + Back trick yet to see if that works as well).
I'm leaning away from the change in servers being my issue since it still streams and just losses sound. Anyone else ever see anything like this? Could it be an Apple TV issue / heat issue / encode issue?

I think it's an audio conversion issue with certain streams.
If I run some HD captures from my CAnon camera through handbrake direct I lose several seconds of audio at the end, so I think it's a problem processing audio/video streams in some circumstances.

PE-10 Cannot hear sound files in preview, editing, or final movie. Works fine outside PE-10.

While editing a movie, the sound attached to video files plays fine. When I import other sound files (such as wav files), they will not play in the preview, editing, or final movie. I've tested the files to make sure they are fine (yes).
I've tried them in each audio/sound section and they won't play anywhere. I've checked setting to make sure audio is enabled.
Please help. I assume something is not set correctly.

Well, if you've got Audacity, you can make them good!
Just Export your file as a new WAV file. Audacity will output the new file with specs that Premiere Elements can work with!

Quick Time 7 Pro unusable to edit Q.T. movie

Apple is no help whatsoever. Response i a form letter over and over again. The Key exist against pirating but in fact prevent legitimate user like me from using the software. Over the years I purchased 4 keys because they did not work. Never a refund. Unbelievable! Apple user friendly? Think again!
Editing functions are grey. Registration says it is Quick Time Pro. 3 days later and I can't use the software anymore. I use Q.T. maybe once a year. Every time the same problem. I suspect that each time an upgrade comes up it screws up Q.T. Pro.
I have been an Apple fanatic ever since the Apple II. I am now disgusted!
Apple should have a look at El Gato's EyeTV to learn how video software should work. Yak!

Registration says it is
Quick Time Pro. 3 days later and I can't use the
software anymore. I use Q.T. maybe once a year.
Every time the same problem. I suspect that each
time an upgrade comes up it screws up Q.T. Pro.
If your key was for QT 6 and you have since installed QT 7 then you do need a new key. I know that it is tough but I consider the H264 in Qt 7 worth it.
If the info still says that QT pro is enabled then there may be other issues. What exactly are you trying to do?
If all you want is to export a file once in a long while, consider the export function of toast - which you may have already, mpeg streamclip (free), isquint (free ipod format only) or visualHub (cheap)
If you want to edit a QT movie then you could use imovie. I think that it can use a number of formats other than just dv.
Personally I would not be without QT pro.

How to import video to edit with norrkross movie 1.2.2 ?

I want to import my video to edit with norrkross movie 1.2.2 but im not able to import the video with my sony handy cam im new with video editing and i wanted to know if theres a better software for sony handy cam to sync video and record sound seperately.Thank you

What about iMovie? It's already on your computer.

Is there any way to edit a finished movie on imovie?

I was editing a video and it froze so i decided to save it to my theater. I found out I could add it to a new one but I'm not able to edit it. If anyone knows how to edit the movie that would be great. It is saved on my theater and iCloud. I need it by tomorrow. Thank you so much!
I have the iMovie that comes with the most recent mac book pro.

The easiest way to edit an existing movie is to go back to that movie's Project, make your changes and then re-make the movie. I think you can also import an already existing movie (File>Import Media...) but I would do that only as a last resort, like if you have thrown away the movie's Project.
--Blaise

Automatic play reverts back to main menu at end of movie.

I want the DVD to autoplay, without having to make a menu. But automatic play always reverts back to the main menu at end of movie. How do I make an autoplay with no menu at all?

Hi
a. Not possibly
b. By faking a "Non-menu" one can get that impression.
• Black background slide
• No animation
• No audio
c. You can select loop. Then it doesn't end on a menu but keeps on playing.
d. I think that if You use the OneStep-DVD You'll get a non-menu at the start
(auto-starting) and no menu at end.
I would do. Copy movie back to a miniDV tape (Camera) and use OneStep-DVD from this.
There might be other ways to do this.
Yours Bengt W

ITunes 12.0.1 crashes at end of movie download from iTunes Store

I have a Mid-2011, 21.5" iMac running Yosemite v10.10.1. I upgraded from 4 to 8 GB of RAM about a year ago, but I don't think that's an issue with this problem.
I can no longer download movie or tv show purchases from the iTunes Store to iTunes v12.0.1 on my iMac. The download starts and lists in the Downloads pane in iTunes. However, once the download has completed and the Download progress bar message changes to "Processing..." iTunes crashes. When I start iTunes back up again, the downloaded movie is not present in my iTunes Movie library. However, if I navigate to the iTunes\Movies\ folder, I can see a folder for the movie and a file instance of the movie (in m4v format) for every attempted download. Something seems to be going wrong with iTunes ability to add the link to the movie file into my iTunes library.
I tried adding the movie folder and file manually to iTunes using the iTunes->File->Add to Library... menu option, but iTunes instantly crashes the moment I click the "Open" button in the Add to Library... dialog window.
I have several movie purchases and gifts that I'd like to add to my local iTunes library, but this error is blocking me from doing that. (Poop!)
Some weird things about my iTunes library on my iMac:
My iMac does not have a large enough built-in harddrive (only 500 GB) to store my iTunes library. In a prior version of iTunes, I located the library on an external 3 TB USB-3.0 harddrive. I'm wondering if there's a bug in iTunes 12.0.1 that occurs when adding content to the iTunes library when that content is located on an external harddrive, i.e. in a folder other than \User\{my username}\Music\iTunes Media\. Perhaps I need to change the iTunes folder structure on the external harddrive to mirror the new folder structure in my \User\{my username}\Music\ folder. I'm a little leery about doing this as I do not want to break all the links in my iTunes library to existing songs, movies, etc.
Thank you,
Isaac

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Edit End of Movie

Similar Messages

Maybe you are looking for