Edit Error CKBK009

Good day Gurus,
I have a question, and i hope you can guide me through it.
Im trying to edit an Error "CKBK009". Im trying to change it from "Error" to "Warning", but i can´t find the way.
I use the transactions code: OPR8; OPR4_CK; OPR4_PPCO and another route through SPRO-Bank index.
The scenario is that, im triying to save a Production Order. That order, had one item or material, that is "non rated material", so it had cero (or none) cost, and its ok. But when i try to save the order, the system show me the error CKBK009.
No price could be determined for material &1 plant &2 - CKBK 009
Diagnosis
For material in plant , the system could not determine a price for valuation view , because no valuation strategy succeeded from valuation variant .
System Response
Since the input quantity is zero for this material item, the costing result is not affected by this error at the pricing stage.
The standard system defines this message as an error message. However, you can use user-defined error management to specify that the message is a warning or an information message, or that it is not issed at all.
Thank you Gurus, and sorry for my lack of English.
Greetings to you all.
Oswaldo Seara, SAP CO Jr. functional consultant

Greetings to you all,
I find the solution implementing SAP note 1008643.. Like Mr. R.Brahmankar say, it dictaminates that you have to make a new entry in OPR8, and put the next values:
ErrorManagID ApplicationArea MsgNo
PPCO CKBK 009
After that, run transaction code OPR4_PPCO and modify the message type for CKBK009, to W (warning).
Thank you for your time.
Oswaldo Seara, SAP CO Jr. functional consultant

Similar Messages

Editing Error when trying to edit in Photoshop Elements

Hello all,
I received a strange error message when I tried to edit a photo in Photoshop Elements from Aperture. The message is as follows:
*"Editing Error*
*This image cannot be rendered for editing because Aperture does not support the image format."*
I've never received this message before and I find it strange that Aperture gives you Tiff and PSD with both regular and 16bit options only to tell you later that it doesn't support that format.
Any ideas why this might be happening?
I'm currently running 10.6, Aperture 2.1.4, and PE 6.0
Thanks in advance.
Best regards,
Jason
Message was edited by: celticmagick

This issue has been reported and acknowledged by Adobe at the bug reporting/feature request site. Please go there and add yourself to the long list of users experiencing the problem and vote on the thread:
http://feedback.photoshop.com/photoshop_family/topics/lr4_external_editor_failure
Also, the issue has been discussed at length in the following thread here in the forum. Towards the latter part of the thread, you can find some possible workarounds.
http://forums.adobe.com/thread/971432?start=150&tstart=0

Aperture 3.4 plug-ins give Editing Error..

I updated Aperture to 3.4 and as before sharing my iPhoto library.
When I try and use any plug-ins like dfine or others I get the following error.
Editing Error.
One or more of the selected versions has a original files which is still being imported. Please wait for the file to copy to complete and try again.
I tried this with several different plug-ins and many different pictures.
However If I import a picture into the aperture library then I can use the plug-ins but if I try and do it using the iPhoto library I cannot.
Any ideas??

Only the pictures that were importing into iPhoto prior to sharing with Aperture I get:
Editing Error.
I am still puzzled by what the difference might be between your and my iPhoto library and plug-ins. As I said, all my plug-ins work well, when I open an iPhoto library from Aperture. It must either be something specific to your plug-ins (that is why I keep asking for the version number of your plug-ins - are they confirmed releases for Aperture 3.4.3 and Mt. Lion?) or something different in your iPhoto Libraries. Are your iPhoto libraries referenced? Mine are managed. And my iPhoto libraries have been originally created in very early iPhoto versions and upgraded to iPhoto '11.

Partner, group editing error

Welcome to everyone! I am the first BlackBerry user.
All well and good for all. Fortnight flay the classic model. My problem is the following. Partner or group of Irish editing error "The partner can name up to 9 characters in length." Have you tried everything out of 8 characters, 10 characters + - I can not save the contact changes. Error ?????
It should help!: Dots:

Yes, there is a language barrier here & I do not understand.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Fcpx editing error, library not open

Fcpx editing error, library not open，The backup file is not open。

I suggest downloading Digital Rebellion's Preference Manager and using it to delete your preferences.
If that doesn't solve the crashes, create a test library by holding down the option key when you launch FCP X and see whether it is possible to work normally in that library.
Rus

Editing error

I never had problems with htese photos before, but now I am getting the following error when trying to launch either NIK pug-ins or Photoshop CS5 from Aperture:
Editing Error: this image cannot be rendered for editing because aperture dies not support the image format
Anyone familiar with this and how to fix it?

What kind of file is it? (i.e.jpeg, Canon RAW, Nikon RAW etc..)
As a workaround until you get the issue fixed, why not reimport the image from the original file, lift and stamp any adjustments you've made in Aperture, and see if the same problem occurs?
A

Editing Error - This Image cannot be rendered for editing...

Editing Error - This Image cannot be rendered for editingbecause Aperture doesn't support the image format.
Thats the message that appears when I'm exporting to Photoshop CS5 (I tried CS4 too), or even other Plug-ins such as Silver Efex Pro...
That had never happened before, and I use Aperture for over 2 years.
Its RAW image format from the same camera and all, nothing has changed. just randomly decided not to export anymore to other programs, Regular exporting works, so it's nothing to do with exporting it self, but the communication between aperture and other softwares, I think.
I've seen some other people having the same problem, does anyone have a take on it, in how to solve this? I can't edit anymore outside of aperture. (of course not including the idea of exporting and doing everything away from aperture, which is totally not viable with the amount of content to be edited and not being in aperture anymore.)
I've tried deleting the preferences, tried repair permissions of the Library, and still didn't work.
Didn't go to the other 2 options (repair and rebuild database) because it would take days if chosen, and still not sure that would solve. or if has anything to do with.
Any light anyone?

What kind of file is it? (i.e.jpeg, Canon RAW, Nikon RAW etc..)
As a workaround until you get the issue fixed, why not reimport the image from the original file, lift and stamp any adjustments you've made in Aperture, and see if the same problem occurs?
A

Adobe Digital Edition Error E_IO_CANNOT_OPEN

When I clic to an url link.acsm downloded from Kobo, I have this error. In french: erreur lors de l'obtention de la licence.(Communication error with the licence server). Impossible to download the ebook. My autorisation is ok,
I have 4.0.1.101645 version, on a pc Windows 7.

Found the root cause:
Digital Editions attempts to download ebook to temporary file
Temporary file (in %TEMP%\Digital Editions) cannot be created because of permissions [1]
Digital Editions errors out with a not very helpful "E_IO_CANNOT_OPEN" result
Workaround:
- Reset the NTFS permission of the Temp folder and below to include your user, for example with this approach (using %TEMP% as folder name, e.g.,
takeown /f "%TEMP%" /r
icacls "%TEMP%" /reset /T
[1] The permissions for the entire Temp folder have been changed by some program, removing the user from the permission list. This may be an Adobe problem itself, as explained in this post, but has not yet been verified. Resetting the permissions makes Digital Editions work as expected, until the permissions are changed back again.

Pre-edit errors

Hi all,
We have a custom interface to load the voucher data from a file to Staging table.
After that we build voucher build to get the voucher created from the staging tables.
So we have run the custom interface and the Voucher build. The custom interface ran to success. But the voucher build ran to no success. It says it has some number of Voucher(s) Staged with Pre-Edit Errors.
We got to know why this happened. that is all because of input file.
we corrected the input file.
What my question there are some vouchers staged with Pre-Edit Erros. I want to delete those. Can any one please tell how to delete those.
Please help me.
Thank you.

I am sorry, By mistake it came twice.

Invalid Edit Error Message

Hey guys, i was using final cut pro 4 to edit a movie for our film fest, and out of nowhere, the program is not letting us drag any clips into the timeline, it pops up with a message saying invalid edit. I tried to see if there was anything in the sequence options menu to help out but it crashed everytime i tried to open the options. I updated to FC HD and updated Pro App support, the program now works and i can get into the options menu, but i still get the Invalid Edit error message whenever i try to add a clip to the timeline, im going insane. please help

Hey guys, bit of an update, i am not able to bring any clips into the time line unless i go in and set an in point and an out point for each clip manually before i bring them down. It didnt always used to be like this so if anyone knows how to turn off the setting or otherwise fix what may cause this to happen please let me know.

Why do I always have "Insufficent Content for Edit" error message ?

Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
Thanks

Tom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks

Visual Studio Community Edition - Error on creating ribbon for Excel Workbook project

Hi. I've been struggling with this for a couple of days now so I hope someone can help me.
I have installed Visual Studio 2013 Community Edition. On installation there was no option to include VSTO and, looking on various forums, I found it was necessary to install the VSTO - November 2014 update separately, which I have done. I'm working on a
brand new virtual server (Windows Server 2008 R2 SP1) and no other versions of Visual Studio have been installed (although I'm surprised to see Visual Studio 2012 as an item in All Programs - but it just contains command prompts).
I have created an Excel Workbook project. When I go to create a new item - Ribbon (Designer) - I get the error:
Could not load file or assembly 'Microsoft.Office.Tools.Common.Implementation, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
I've searched the Internet for anyone who might have had this same issue but have been unable to find anything to help me. I've tried uninstalling the VSTO-November Update and VS 2013 CE and reinstalling both but still the same problem.
Any help would be much appreciated!
David.

Hello David,
What Office version do you have installed on the problematic machine?
Do you run Visual Studio as an administrator?

Production Order with follow-up material unble to save due to error CKBK009

Dear Expert,
When we apply discontintion/follow-up material setting, production order is not able to save. Error message "CKBK009 - No price could be determine for material.....".
SAP Help indicates :
"No price could be determined for material .......... Message no. CKBK009
Diagnosis :
The system could not determine a price for valuation view 0, because no valuation
strategy succeeded from valuation variant 006.
System Response :
Since the input quantity is zero for this material item, the costing result is not
affected by this error at the pricing stage.
The standard system defines this message as an error message. However, you
can use user-defined error management to specify that the message is a warning
or an information message, or that it is not issed at all.
However, in Controlling's User-Defined Error Management, CKBK009 is already warning only.
What other setting is needed ?
Thanks for helping !

Dear all,
 Manage to solve the problem via Note 1008643, per following.
 THANK YOU for all your guidance & Have a nice day !
NOTE 1008643 :Symptom
In a production order error message CKBK-009 is raised during cost calculation.
This message cannot be modified into a warning or information message.
Other terms
CKBK009, CO01, CO02, CO03
Reason and Prerequisites
System design
Solution
Please make a new entry in TA OPR8 with the following characteristics:
ErrorManagID ApplicationArea MsgNo MinMsgType MaxMsgType
PPCO CKBK 009
Then run TA OPR4_PPCO to modify the message type for CKBK009.

Edit error message as displayed when browsers fail to display dynamic pdfs

I'm sure many people here are aware of the problems that arise when many browsers attempt to open a dynamic writable pdf. The built in plugin that ships with most browsers is unable to display the content, and as a result the following message is shown.
"If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be able to display this type of document. You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by visiting http://www.adobe.com/go/reader_download.
For more assistance with Adobe Reader visit http://www.adobe.com/go/acrreader."
(I trimmed a bit because the message is quite long)
My question is, is there some way to modify the message above by editing the pdf using a program like Adobe Livecycle or Acrobat Pro? The message that displays is basically useless, because the problem is actually due to the browser's inability to display the pdf. If it is possible to replace this message with something more meaningful, such as instructions on downloading the form with right click, that would be fantastic for the users.
Does anyone know where this information is stored? It doesn't seem to be browser specific (as the browsers I've tested seem to display the same message).

I got the error messages to work from properties file and some helper class, but not through just defining in faces-config or web.xml.
I am sure there is a better way to do but hopefully this will help you.
FacesContext context = FacesContext.getCurrentInstance();
In my validation method - I have the following code, which will associate
the appropriate message
String failureMsg = ErrorMessages.getString("SignUpData.NO_USER_NAME");
FacesMessage message = new FacesMessage(FacesMessage.SEVERITY_ERROR,          failureMsg, failureMsg);
context.addMessage("login_form:username", message);
My properties file - errormessage.properties - have the following info
SignUpData.NO_USER_NAME =Please Enter User Name
SignUpData.NO_PASSWORD =Please Enter Password
Helper class - ErrorMessages.java
import java.util.MissingResourceException;
import java.util.ResourceBundle;
public class ErrorMessages {
private static final String BUNDLE_NAME = "com.path1.path2.resources.error_messages";
private static final ResourceBundle RESOURCE_BUNDLE = ResourceBundle.getBundle(BUNDLE_NAME);
private ErrorMessages() {
public static String getString(String key) {
try {
return RESOURCE_BUNDLE.getString(key);
} catch (MissingResourceException e) {               return '!' + key + '!';
I am also looking for a way to avoid all this extra helper classes if there is a better alternative.
thanks
ponni

Installing CCB 2.3.1 on Windows 2008 R2 Standards 64 bit Edition Error

i Installed the Micro Focus Server v5.1 and java 1.6._23 build , Activer Perl 64 all are 64 bit software, all software are installed.
When i run the CCB server i am getting the follwing Exception
this is one Exceptio
1. C:\opt\MicroFocus\Bin\CBLJVM_SUN.DLL: Can't load IA 32-bit .dll on a AMD 64-bit platform
The other Exception are here
- 2011-05-10 21:06:04,336 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) Exception in thread "Remote JVM:3 Thread 1" java.lang.UnsatisfiedLin
kError: <h1>no cbljvm_sun in java.library.path</h1>
- 2011-05-10 21:06:04,446 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
- 2011-05-10 21:06:04,555 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.Runtime.loadLibrary0(Runtime.java:823)
- 2011-05-10 21:06:04,664 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.System.loadLibrary(System.java:1028)
- 2011-05-10 21:06:04,774 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.microfocus.cobol.RuntimeSystem.<clinit>(Unknown Source)
- 2011-05-10 21:06:04,883 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.CobolThread.run(CobolThre
ad.java:30)
- 2011-05-10 21:06:13,790 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) java.lang.RuntimeException: No command runner was registered with th
is remote JVM after waiting 10000ms
- 2011-05-10 21:06:13,790 [JVM 3 INFO logger] INFO (cobol.host.ProcessLogger) - 2011-05-10 21:06:13,790 [Remote JVM:3 Main ] INFO (cobol.host.Re
moteJVM) Shutting down loggers and exiting Remote JVM 3
- 2011-05-10 21:06:13,899 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.RemoteJVM.waitForServerTo
RegisterRunner(RemoteJVM.java:163)
- 2011-05-10 21:06:14,008 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.RemoteJVM.main(RemoteJVM.
java:121)
- 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.OptimizedRemoteExecuterStub) An exception occurred invoking remote command.
- 2011-05-10 21:06:15,290 [pool-2-thread-1] INFO (cobol.host.RemoteJVMConnectionImpl) Connection to JVM 3 being shunned
- 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.RemoteJVMConnectionImpl) An exception has occurred calling the remote JVM
- 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.RotatingCommandRunnerProvider) Caught exception in Remote JVM connection housekeeper:
com.splwg.base.support.cobol.host.InputClosedException:
The following stacked messages were reported as the LoggedException was rethrown:
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception has occurred c
alling the remote JVM
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception occurred invok
ing remote command.
2011-05-10 21:04:47,084 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ContextLoader) Disc
overing lookups for ccb
- 2011-05-10 21:04:47,521 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ContextLoader) Done
discovering ccb lookups (generated=486, manual=126), time 443.179 ms
- 2011-05-10 21:04:47,834 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN (shared.environ.ContextManagedObjec
tSet) Could not load resource com/splwg/cm/domain/contextManagedObjects.xml on classpath. This may be harmless but could mean a problem with the clas
spath. Please verify that the classpath for application cm is correctly configured.
- 2011-05-10 21:05:02,490 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
gistering lookups
- 2011-05-10 21:05:03,334 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 66
2 lookups registered, time 841.526 ms
- 2011-05-10 21:05:03,334 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ComponentContainer
LookupHelper) Initializing constants on 696 lookup interface classes
- 2011-05-10 21:05:04,037 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ComponentContainer
LookupHelper) Done initializing lookup constants, time 710.220 ms
- 2011-05-10 21:05:04,037 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
gistering Entities
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 89
8 entities registered, time 3,979.833 ms
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
gistering Code Description queries
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 52
code/description queries registered, time 0.079 ms
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
Edited by: sivaram on May 10, 2011 9:24 PM

Got it .problem is environment path settings.

Edit Error CKBK009

Similar Messages

Maybe you are looking for