Edit existing videos
Hi all!
I have some pieces (some different files) of a video and I'd like to put them together by editing them. I'd like to keep the original audio too, but it seems that I have to choose an audio file from my iTunes library. If not, iMovie HD edit the video apparently without any audio. How can I keep the original audio?
If a video file -- a movie -- contains both video and audio, the audio is automatically included when the movie is imported to the iMovie project. My guess is some iMovie feature isn't set quite right or you'd be able to hear it. You should be able to hear the audio when you play the video clip.
Note that the audio of a newly-imported movie does not show up in an audio track of the timeline; it's part of the video clip in the top track.
If you're not hearing any audio:
• Make sure the iMovie audio volume is not turned all the way down. Adjust the iMovie volume slider below the clip viewer. (Also make sure your Mac speaker volume is audible. It's a separate setting.)
• Make sure the audio checkbox for the video track is turned on at the right end of the iMovie timeline. For the checkbox to appear, the timeline must be in timeline mode, not clips mode.
• Make sure your iMovie preferences aren't set to mute the audio. The Mac's audio is muted when the Playback checkbox "Play DV project video through to DV camera" is turned ON.
• If all that fails, make sure the video contains audio. Try playing the source movie in QuickTime Player.
Karl
Similar Messages
-
I was almost finished editing my video and suddenly my video files just show a black screen and wont play.
MacBook Pro / Mozilla Firefox / Netflix / Silverlight Update solved - DON'T DWNLOAD FROM NETFLIX
I solved this problem tonight. I have a MacBook Pro with 10.5.8. I know, it's old. But I love my Netflix and I recently noticed that Firefox plays Netflix much better. Then I suddenly got this message that I needed to download the latest Silverlight - it only takes 30 seconds! - WRONG. However, after much searching, I finally did the steps in order and it worked.
This was after repeatedly downloading Silverlight from the Netflix site without success. So here's what I did:
1. Went to http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
2. Followed the directions. I felt like such an idiot for not doing it right before.
3. Go to your hard drive and search for "Silverlight" to locate ANY existing Silverlight files: .dmg, etc.
[also check your Libary/ Internet Plug-ins, but the above search is faster]
4. Drag it all to the trash and empty it.
5. Go back to the Get Silverlight page and click on the Install on that page, not the Netflix site.
6. Note the steps for Safari or Mozilla Firefox - I wanted Firefox, so I follwed those instructions.
7. Once it's installed, close all the browsers and Restart that bad boy. Right away.
8. Open a browser, go to Netflix and proceed to joyfully rot your brain with Netflix content. Yay! -
How to edit a video that has already been exported?
I have a video which was exported, however I would like to go back and edit some things. When I open FCPX, I am unable to find the video file at all, and the only way I can even see it in the program is by importing the already exported file. Obviously I cannot edit the video. If there are any suggestions on what can be done to retrieve the file, it would be very much appreciated! Thank you!
Hi Mikaelaken,
FCPX is generally good at keeping track of your projects, events and media.
What version of FCPX are you running?
If you dont see the project at all in your projects/events list, it may be that you moved some files about outside of FCPX in Finder? I suspect it isnt lost, just misplaced
Perhaps a brief description of your recent workflow/activity with respect to this project may help us to help you
Cheers,
Bammers -
PLEASE HELP. =)
we are about 4 minutes into editing a video for the first time on final cut pro x 10.1. everything was going very smoothly, but then it started freezing up. I had to do a hard reset and took it into the computer store that actually installed final cut for us. they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!) We work on an IMAC 2.66 ghz intel core 2 duo. 8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions) Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
Turn off wi-fi or disconnect the wire that goes to the Internet
Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
Basically, you probably need to free up resources.
For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though. -
How can I edit a video clip in PE and take it out of PE to use elsewhere?
I want to add edited video clips from PE to use in my photoshop slideshow. I would also like to use the edited clips in another programme, but I only get a file that can only be opened in PE. I have PE 4 and Photoshop 6.on a desktop PC using Vista.
Message was edited by: MelliehaMany thanks for your reply.
I have video thumbnails from my video camera in My Videos folder. I would like to edit them individualy and return them to my folder as thumbnails again.
I hope I have explained my needs properly. I have made a slideshow including video on photoshop, but I get lost with it on PremE so I have kept to the job on PhotoEl. It seems to work for me apart from the problem of editing the video clips. I have added audio to the slideshow, but when it gets to a video clip I lose the video's sound. I would like to keep that rather than the added audio (music) that plays over the stills.
As you have no doubt realised, I am a beginner and a pensioner. Would senility be an excuse?
Thanks again,
John -
Cant hear audio when editing a video in photoshop cs6
IM EDITING A VIDEO FOR THE 1ST TIME IN PHOTOSHOP CS6. However when I play it I dont hear any audio. Its not muted either
Hello,
I found this in the Adobe help files...
"About video layers
You can use Photoshop to edit individual frames of video and image sequence files. In addition to using any Photoshop
tool to edit and paint on video, you can also apply filters, masks, transformations, layers styles, and blending modes.
After making edits, you can save the document as a PSD file (that can be played back in other Adobe applications such
as Premiere Pro and After Effects or accessed as a static file in other applications), or you can render it as a QuickTime
movie or image sequence.
Note: You can work only with the visual images in a video file, not the audio." -
my macbook pro freezes when I use peripherals, thunderbolt, USB.... and it becomes imposible to edit HD videos, any suggestions?
The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I have Adobe Premiere Element 7 installed and I use that as to editing my video's. I am having such a hard time trying to lightening a dark video. I tried everything but nothing is working. Please help
saloumehdaghighi
Premiere Elements 7, on what computer operating system?
In Premiere Elements 7, there are various effects for lightening a dark video. After applying one of these lighting effects, have you been editing these applied effects in Edit Effects/Properties Palette after you apply them?
Video Effects
Adjust - Brightness and Contrast, Auto Levels....
Image Control Panel that is a default Properties Palette panel along with Motion and Opacity....for Brightness, Contrast, Hue, and Saturation.
ATR -
Which iMac for Editing ACVHD video?
Hello all,
I am a long-time PC user in need of a new computer and thinking of making the switch to an iMac. I have hours of HD video shot on a Canon Vixia HF200 camcorder, and even my high-end work computer bogs down trying to edit HD video.
How much horsepower is recommended in an iMac for editing AVCHD? I know that more is always better, but from a dollars perspective, middle of the road is where I am aiming.Most Mac OS X editing applications transcode AVCHD to an intermediate format (Apple Intermediate Codec, or ProRes if you were to use Final Cut Studio) for editing, so you don't need that much horsepower (but lots of disk space).
You might be able to edit AVCHD natively using Adobe Premiere or Premiere Elements, in which case a powerful computer would help. It may also be possible to trick Apple's apps into editing AVCHD natively by remuxing to .mov with something like ClipWrap.
I'd say get an iMac as powerful as you can afford (favoring the quad-core over a similarly-priced dual-core configuration), and consider keeping money aside for accessories (e.g. external drives) or extended warranty. -
After I create a flash swf file how do I edit the video and audio?
I created a nice flash animation, but it appears there are no video editing program which edit swf files.
Why would flash create a file that cannot be edited in video editing programs including their own premiere pro?
I have to get a program to convert the swf to an flv file and then I can use a video editing program?
I tried exporting it to an avi, but much of the functionality was lost. I am looking at a man standing there instead of
moving his lips while talking, for example. Am I missing something? Please advise. Thanks!If you have an swf file then you don't have a video to edit. You can export to a limited number of video formats from Flash. In order to do that successfully, you need to prepare your file so that it will export as you want. This means that you will have to produce the entire file as a linear sequence using the timeline and with no interactivitiy. You can use a limited amount of Actionscript, but it is a very small subset of the available language. Your audio must be in the timeline.
Here is an Adobe help file for exporting to video: Flash Professional Help | Exporting Graphics and Videos -
Hi... i am try to edit existing pdf in itext any one can help me this sending code.......
Using Itext i want to remove some content in the PDF
This is my code i want to Edit or Remove some text in the Pdf
package view;
//import com.itextpdf.text.BaseColor;
//import com.itextpdf.text.DocumentException;
//import com.itextpdf.text.pdf.PdfContentByte;
//import com.itextpdf.text.pdf.PdfCopyFields;
//import com.itextpdf.text.pdf.PdfStamper;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.pdf.PdfContentByte;
import com.lowagie.text.pdf.PdfCopy;
import com.lowagie.text.pdf.PdfCopyFields;
import com.lowagie.text.pdf.PdfDictionary;
import com.lowagie.text.pdf.PdfImportedPage;
import com.lowagie.text.pdf.PdfName;
import com.lowagie.text.pdf.PdfNumber;
import com.lowagie.text.pdf.PdfReader;
import com.lowagie.text.pdf.PdfStamper;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;
public class SplitingFlat {
public static void main(String[] args) {
String fileName =
"D://OMR//OMRpdf//FlatFlies//EligibilityLists_Flat.pdf";
splitPDFFile(fileName);
rotateFlatPDF();
markPdf();
mergeFlatPdf();
public static List splitPDFFile(String fileName) {
List list = new ArrayList();
int startPageNo[] =
{ 1, 29, 47, 67, 85, 133, 179, 197, 225, 243, 277, 295, 319, 337, 365,
393, 419, 439, 471, 491, 513 };
int endPageNo[] =
{ 28, 46, 66, 84, 132, 178, 196, 224, 242, 276, 294, 318, 336, 364,
392, 418, 438, 470, 490, 512, 532 };
try { /**
* Read the input PDF file
PdfReader reader = new PdfReader(fileName);
int totalPages = reader.getNumberOfPages();
int split = 0;
for (int i = 0; i < endPageNo.length; i++) {
for (int pageNum = 1; pageNum <= totalPages;
pageNum += endPageNo[i]) {
if (pageNum == 1) {
pageNum = startPageNo[i];
split++;
String outFile =
"D://OMR//OMRpdf//flat//split//Flat-split-" + split +
".pdf";
Document document =
new Document(reader.getPageSizeWithRotation(1));
PdfCopy writer =
new PdfCopy(document, new FileOutputStream(outFile));
document.open();
int tempPageCount = 0;
int number = endPageNo[i] - pageNum;
for (int offset = 0;
offset < number && (pageNum + offset) <= totalPages;
offset++) {
PdfImportedPage page =
writer.getImportedPage(reader, pageNum + offset);
writer.addPage(page);
tempPageCount++;
document.close();
writer.close();
list.add(outFile);
break;
} catch (Exception e) {
e.printStackTrace();
return list;
private static void rotateFlatPDF() {
String pdfFolderPath = "D:\\OMR\\OMRpdf\\flat\\split\\";
int split = 1;
File pdfFolder = new File(pdfFolderPath);
if (pdfFolder != null && pdfFolder.isDirectory()) {
String[] pdfFileNames = pdfFolder.list();
if (pdfFileNames != null && pdfFileNames.length > 0) {
int documentNumber = 0;
for (String pdfFileName : pdfFileNames) {
File pdfFile =
new File(pdfFolderPath + File.separator + pdfFileName);
if (pdfFile.isFile()) {
documentNumber++;
PdfReader pdfReader;
String opFile =
"D:\\OMR\\OMRpdf\\flat\\rotate\\" + "DocumentSplitRotate-" +
split + ".pdf";
try {
pdfReader =
new PdfReader(pdfFolderPath + File.separator +
pdfFileName);
int n = pdfReader.getNumberOfPages();
int rot;
PdfDictionary pageDict;
for (int i = 1; i <= n; i++) {
rot = pdfReader.getPageRotation(i);
pageDict = pdfReader.getPageN(i);
pageDict.put(PdfName.ROTATE,
new PdfNumber(rot - 90));
PdfStamper stamper =
new PdfStamper(pdfReader, new FileOutputStream(opFile));
stamper.close();
pdfReader.close();
split++;
} catch (IOException e) {
} catch (DocumentException e) {
public static void markPdf() {
try {
//Flat
String pdfFolderPath = "D:\\OMR\\OMRpdf\\flat\\rotate";
File pdfFolder = new File(pdfFolderPath);
if (pdfFolder != null && pdfFolder.isDirectory()) {
String[] pdfFileNames = pdfFolder.list();
if (pdfFileNames != null && pdfFileNames.length > 0) {
int documentNumber = 0;
for (String pdfFileName : pdfFileNames) {
File pdfFile =
new File(pdfFolderPath + File.separator +
pdfFileName);
if (pdfFile.isFile()) {
documentNumber++;
PdfReader pdfReader =
new PdfReader(pdfFolderPath + File.separator +
pdfFileName);
int pageCount = pdfReader.getNumberOfPages();
String outputFileName =
"D:\\OMR\\OMRpdf\\flat\\mark\\" +File.separator +pdfFileName.substring(0, pdfFileName.lastIndexOf(".pdf")) +
"_OMR_Marked.pdf";
FileOutputStream fileOutputStream =
new FileOutputStream(outputFileName);
PdfStamper pdfStamper =
new PdfStamper(pdfReader,
fileOutputStream);
for (int i = 1; i <= pageCount; i++) {
PdfContentByte cb =
pdfStamper.getOverContent(i);
cb.beginText();
cb.setColorStroke(Color.RED);
if (OMRMarkingUtilityFlatfold.isFlatZone1MarkingEnabled(documentNumber,
i))
OMRMarkingUtilityFlatfold.drawFlatOMRMark(cb,
1, i,
pageCount);
if (OMRMarkingUtilityFlatfold.isFlatZone2MarkingEnabled(documentNumber,
i)) {
PdfContentByte cb2 =
pdfStamper.getOverContent(pageCount);
OMRMarkingUtilityFlatfold.drawFlatOMRMark(cb2,
2, i,
pageCount);
if (OMRMarkingUtilityFlatfold.isFlatZone3MarkingEnabled(documentNumber,
i)) {
PdfContentByte cb3 =
pdfStamper.getOverContent(1);
OMRMarkingUtilityFlatfold.drawFlatOMRMark(cb3,
3, i,
pageCount);
if (OMRMarkingUtilityFlatfold.isFlatZone4MarkingEnabled(documentNumber,
i))
cb.endText();
pdfStamper.close();
fileOutputStream.close();
catch (IOException ioe) {
ioe.printStackTrace();
} catch (DocumentException de) {
de.printStackTrace();
private static void mergeFlatPdf() {
try {
PdfCopyFields copy =
new PdfCopyFields(new FileOutputStream("D:\\OMR\\OMRpdf\\flat\\merge\\output1.pdf"));
String pdfFolderPath = "D:\\OMR\\OMRpdf\\flat\\mark\\";
File pdfFolder = new File(pdfFolderPath);
if (pdfFolder != null && pdfFolder.isDirectory()) {
String[] pdfFileNames = pdfFolder.list();
if (pdfFileNames != null && pdfFileNames.length > 0) {
for (String pdfFileName : pdfFileNames) {
copy.addDocument(new PdfReader(pdfFolderPath +
pdfFileName));
copy.close();
} catch (IOException e) {
} catch (DocumentException e) {
package view;
import com.lowagie.text.pdf.PdfContentByte;
import org.apache.log4j.Logger;
public class OMRMarkingUtilityFlatfold {
private static final Logger logger =
Logger.getLogger(OMRMarkingUtilityFlatfold.class);
//public static final int Flat_Zone_X_Position = 14; // 0.1875 inches
public static final int Flat_OMR_Mark_Thickness = 1; // 0.01 inches
public static final int Flat_OMR_Mark_Length = 29; // 0.3 inches
public OMRMarkingUtilityFlatfold() {
super();
public static boolean isFlatZone1MarkingEnabled(int documentNumber,
int pageNumber) {
boolean flatZone1 = true;
// if (pageNumber % 2 != 0)
// trifoldZone4 = true;
return flatZone1;
public static boolean isFlatZone2MarkingEnabled(int documentNumber,
int pageNumber) {
boolean flatZone2 = true;
// if (pageNumber % 2 != 0)
// trifoldZone4 = true;
return flatZone2;
public static boolean isFlatZone3MarkingEnabled(int documentNumber,
int pageNumber) {
boolean flatZone3 = true;
// if (pageNumber % 2 != 0)
// trifoldZone4 = true;
return flatZone3;
public static boolean isFlatZone4MarkingEnabled(int documentNumber,
int pageNumber) {
boolean flatZone4 = true;
// if (pageNumber % 2 != 0)
// trifoldZone4 = true;
return flatZone4;
public static int getFlat_Zone_X_Position() {
return getFlat_Zone_X_Position();
public static int getFlat_Zone3YPosition() {
return getFlat_Zone3YPosition();
public static int getFlat_Zone4YPosition() {
return getFlat_Zone4YPosition();
public static void drawFlatOMRMark(PdfContentByte cb, int zone,
int pageNumber, int pageCount) {
float x;
float y;
System.out.println(pageNumber);
if (pageNumber == 1) {
x = 14;
} else {
x = 7;
switch (zone) {
case 1:
if (pageNumber == 1)
y = 689;
else {
y = 688;
break;
case 2:
y = 679;
break;
case 3:
x = 14;
y = 670;
break;
case 4:
if (pageNumber == 1)
y = 661;
else {
y = 660;
break;
default:
y = 0;
break;
cb.moveTo(x, y);
cb.lineTo(x + Flat_OMR_Mark_Length, y);
cb.stroke(); -
Can you transfer hd video directly from an ipod touch to the ipad 2 and then EDIT that video in imovie? I will be on the road and wont have a mac, just an ipad 2 and ipod touch. I want to shoot video on the touch and edit it on the ipad. Thanks!
Thanks Tgara.
Its funny. So far the responses have been 50/50 on this question. I even asked two seperate Apple Store employees here in NYC, and got two different answers! One said yes, the other no.
Argh!
I know from watching the keynote speech about icloud and iOS 5 that you will be able to cut the cord between the pc and ios devices like the ipad. No more need to sync them via a cord. So will that mean i would then be able to load video directly to the ipad via tha cam kit connector from my ipod? Also i wonder if/when Apple will allow HD video from on Apple devices like a canon dslr to be able to transfer to the ipad via the cam kit connector AND be able to EDIT that footage in imovie for the ipad. Speaking of imovie for the ipad...i hope it gets an update soon as well.
Anyway....with the macbook airs getting updated next week with thunderbolt and new sandy bridge chips....i may just get one of them instead of the ipad 2 for editing video on the road. Still...i prefer surfing the web experience on the ipad. Grrrrrrr. **** youuuuuuu Apple!!! Lol -
Sapphire HD 7950 Mac Pro Edition 3GB Video Card
I am thing about putting in this video card in my Mac Pro 2008.
Sapphire HD 7950 Mac Pro Edition 3GB Video Card
What do the apple support Communities think about is Card?I have been using this card For one month now in Mac Pro 3.1 early 2008 model.
works great in Lion. This weekend I upgraded to Mountain Lion and screen rarely
might flash on left mouse clicks in firefox 23 and 22 web browsers.All other applications,
especially X Plane and on the windows 7 ultimate bootcamp disc with Flight sim X and
2004 run fantastic with extremely high frame rates -
How do I edit the video audio in Adobe Premiere Elements 10
I want to edit the video audio, so that I can get rid of some of the sounds and background noises. Also, how do you import Plug-ins into Adobe Premiere Elements 10? I have trial versions of Adobe Audition CC and SmartSound. Thanks in advance for your help!
woody122
What computer operating system is your Premiere Elements 10 running on? And, very important, what video card/graphics card does your computer use.
If a NVIDIA GeForce card, then that needs to be looked at first because of the serious and known Premiere Elements 10/NVIDIA GeForce issue which is described in one of the announcements at the top of this forum.
SmartSound is an feature included with Premiere Elements 10. Why are you looking at any trial version of SmartSound?
As for Adobe Audition CC, I was not aware that this is a plug-in. As far as I know, Adobe Audition CC is an application that Premiere CC can integrate with as a CC application which Premiere Elements is not.
See the following video tutorial
Clean up Premiere Pro audio clips with Audition | Adobe Creative Cloud tutorials
Look at the price tag afterward, probably on subscription rates?
Please check out the Premiere Elements 10 audio effects, especially those related to noise reduction.
Have you looked at the free audio editor named Audacity and its noise reduction opportunities?
Please give more details in support of your Adobe Audition CC being a plug-in if you are confident that it is.
Thanks.
ATR -
Best Quality Export Settings in MPEG Streamclip to Edit HD Video in iMovie
Hi,
I import video from data DVDs and regular DVDs and edit the videos in iMovie. In the past, I've always used MPEG Streamclip because it can read the native DVD VOB format. I then use the "Export to DV" option in MPEG Streamclip which exports a .DV file readable by QuickTime or iMovie. These are large files, but it is my understanding that this is best quality for editing.
Now I have started to receive HD Videos. When I use MPEG Streamclip the same way, it reduces the HD video into a windowbox 720x480 video loosing all HD resolution.
I've done some research online and apparently MPEG Streamclip's DV export options are pretty limited and other people have said to use the "Export to MPEG-4" or the "Export to QuickTime" which are more configurable. Each of these requires a Compression Codec Selection. Some have said to use H.264, but I've also read that you should not compress with H.264 if you're going to be doing editing.
I do not care about file size, I want maximum quality. The incoming DVD video is 1280 x 720 (HDTV 720p), what Compression selection do I select in MPEG Streamclip for "Export to MPEG-4" or "Export to QuickTime" to maintain the best quality for editing in iMovie? I appreciate your help!
JerryUse Apple Intermediate Codec for best quality and best editing performance.
If you have Final Cut Pro installed, you may have additional good options like ProRes 422.
Maybe you are looking for
-
HT1426 How do I find the iTunes64.msi file for my iTunes on Windows 7?
iTunes64.msi is missing and I can't update or uninstall my iTunes without that file. Is there any way to either download it or find it? This is the message that pops up when I try looking for it.
-
Impossible to call a action handler in managed bean
Hello! I'd developed simple jsf-application using JDeveloper 10.1.3.3 that doesn't use faces-config.xml for a nafigation. Simple jsf page (page1.jspx) has only one command button: <af:commandButton text="commandButton 1" binding="#{backing_page1.comm
-
JNI and STL undr SUN C++ 6 compiler
Compiling a shared library (for loading by VM) according JNI specification i get "library not found" error in runtime. This error does not appear when compiling the same code with g++ or erasing all STL related code fragments. Has anybody an idea, wh
-
I have been using SQL Server for sometime with my company's product with no unusual problems for some time. However, having recently installed a Forte repository on a newly setup NT machine (Workstation 4, SP4), I have come across problems. The code
-
How do I publish iWeb site with Cyberduck??
Hi there, I am trying and trying, but I can't figure it out. Can anybody help me and tell me how to publish an iWeb site with Cyberduck?? Thank you so much! Marc