Edit Fix while in Encore

After doing a dvd test from Encore, I noticed that one of the stills (in the video) that was exported from Pro (in the main file) was mistakenly not cropped, and therefore of course, remained uncropped in the Encore timeline (for abouot 4-5 seconds). And I was just curious (since it took over 12 hours to export that video from Pro), is there any simply way (for when you make a simple bonehead mistake like this) to recitfy it STAYING JUST IN Encore (like selecting that one 5-second spot in the Timeline and manually cropping it there)?!
It's not the end of the world or anything, but just thought I would ask because THAT would make the video perfect!
Thank you for your help!

A good point, but I think (no time to test) that if the change is on a gop boundary, Encore may handle it in the vob creation - i.e. it does not have to transcode when there is no gop change.
That assumes a single change, not adding together on one timeline.
I think there are too many problems to gamble on changing in Encore, so the question is more academic for me.

Similar Messages

VS 2013 error: "Attempted TextBuffer edit operation while another edit is in progress"

I´m using Visual Studio 2013 Version 12.0.21005.1 with VB.NET on Framework 4.5.50938, OS is Windows 7 SP1 32 Bit.
I´m randomly getting the error message
"Attempted TextBuffer edit operation while another edit is in progress"
when trying to edit a source file. The file then remains inaccessible until I restart Visual Studio.
This message seems to appear at random and out of nowhere, sometimes after running or debugging the program, sometimes in the middle of editing. I can edit one file, switch to another one and receive this error.
Sometimes I can work half an hour before this message appears, sometimes only a couple of minutes. I´ve been looking all over the web for solutions but can´t find anything.
This error is beginning to severely disturb my work, so any ideas would be highly appreciated.

Hi AndyF69,
Sorry for that we couldn’t repro this issue.
Please check whether you install any add-ins or extension tools in your VS, please disable/remove them, and check it again. I doubt that it would be related to them.
Please also run your VS in safe mode.
http://msdn.microsoft.com/en-us/library/ms241278.aspx
If still no help, please re-install/repair your VS.
Have a nice day,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Edit code while in debug mode in CC

Hi,
I have just upgraded to Flash CC, and can no longer edit code while in debug mode. It appears the code window becomes read only while debugging. This is problematic because I often find it very useful to copy in variable names from data visible in the variables display portion of the call stack. This is very helpful if I have made a typo in my variable names, or if I am reading out data from a network request and I don't know the variable names ahead of time. Is there a way to unlock the code window so it does not become read only during debugging?
-David

Hi Amy,
I appreciate that you are trying to help, and from a purely coding standpoint see the advantages to Flash Builder IDE over the Flash Professional IDE. Although personally I am a Visual Studio kinda guy... However I am working with a fairly large code base, (we are a small game studio that has been working with flash cs4, 5, and 5.5 for the past 5 years) and while nobody that works for me is crazy enough to put code on the timeline, we do have a significant amount of UI elements, dialogs, and layouts that are designed in the Flash editor with logic in classes that extend those elements. Now correct me if I am wrong, but it is my understanding that you cannot build FLA files from flash builder let alone have them link with the classes that are set to extend them in Flash Professional. The move to CC actually gives us access to Flash Builder - something that previously was an additional $500 a seat. While it may make sense for us to use in the future, for now I am faced with the issue of the new Flash CC has removed the ability to edit the code while debugging. I was hoping there was a setting or a hidden option to turn this very unnecessary change off, I wasn't really asking for a critique of my IDE choice.
-David

BW Upgrade - Urgent fix while upgrade

Hi,
We are in the pre-upgrade stage for B3.5-->BI7.3 upgrade.
We have copied current development box (BWD) .This copy instance box is called BWC.
BWC transport path is connected to the quality (BWQ) and production(BWP).
BWD will be upgraded to BI7.3.
Can i know for urgent fixes , we will be using BWC, transport to BWQ and BWP.
Do we need to manually perform the fix again on BWD and transport it to production once the upgrade is fully completed?
Regards
Maili

Hi,
I don't agree with your procedure:
- why you want to upgrade bwd? and connected BWC with BWP? Why so difficult?
- don't copy bwd. Do you have there all data, queries, process chains? Use a copy from BWP for testing.
I want do this:
- test the upgrade on BWC. Open the sytem: test also the development functions.
- when it is ok, do the upgrade on BWD, bwq and bwp. And delete the system BWC - its only a sandbox/testsystem.
- so, you dont need to transport objects to different "development" systems.
- the upgrade is done on an weekend. So, you dont have urgent fix while upgrade.
Sven

How to Fix the following Encore Error: "Quick Time system error: number = -1"?

Has anyone seen this error before in Encore? Quick Time system error: number = -1 How do you fix it? I get it while burning a DVD. I have the latest version of Encore and the menu I am using was exported from After Effects.
Thanks so much,
Heather

When I start Encore I always receive a warning that I do not have Quicktime installed
Since I do not use QT in any way, I ignore the warning and Encore works just fine
I also do not use menus from AE, so there MAY be something to look at
Does Encore work properly if you use one of the built-in menus?

How to maintain the Goods reciepent field in edit mode while SHC creation

Hi Experts,
Can any one suggest me a solution, this is the requirement in SRM 5.0 version classic.
Business wants to keep the Goods recipent field in edit mode instead of in grey mode, so that User can edit and assign someone at the time of creation of shopping cart.
This is because If i raise a shopping cart i will be goods recpient by default, but business does not want that they want to edit and assign a person at the time of creation of shopping cart .
Can it be possible in the standard template.
If so what has to be done. Please suggest !!!
Regards
Srujan.K

Hi
Srujan:- while creating a cart you might get a list of good recipient right so you can assign whoever you wish to be a good recipient right. while creatiing a cart good recipient was determined and partner functions are created for good recipient. do you want to edit them again.
Can we change Goods Recipient after shopping cart is ordered
nagaraj:- in old srm it helps but srm 550 say no
http://help.sap.com/saphelp_srm50/helpdata/en/84/a7e3389870c05ce10000000a114084/content.htm
we can not make default good recipient
for eg srujan create a cart by default naga become a good recipient . that is old. this requester attribute dont work for dual purpose.
it uses sfor only on behalf of only
br
muthu

IMovie editing slow while MBP connected to Plasma Screen

Am newbie to MBP and iMovie
I am using the MBP connected to the 42 inch Plasma screen. I am getting frequent and prolonged spinning ball while editing in iMovie.
The raw DV footage is stored on Glyph EHD connected to MBP by FireWire 800 cable.
Is the slow functionality and frequent appearance of spinning ball due to connection to Plasma screen ? Is it because the MBP is slowly accumulating more and more footage while building the movie project in iMovie on the MBP hard drive ?
There should be no accumulation of DV files on the MBP hard drive until which time as I decide to burn the movie. Yes, No ?
What sort of interface or accelorator is available for install between MBP and Plasma to overcome this problem since this is a great way to edit.
Thanks

That's not good. Were you barefoot and on a concrete floor? Or touching something else with the hand that wasn't touching the Mac?
It sounds like there could be mis-wiring in the walls...like a crisscross of neutral and ground. You might invest in one of those inexpensive house wiring detectors that they sell at hardware stores and see if it shows a fault when plugged into the same outlet where the TV plugs in.

Row id in editable ALV while using MP_MOD_ROWS

Hi Experts
I have an editable alv with 13 fields editable in it.     Inside the DATA_CHANGED event i am making use of the attribute MP_MOD_ROWS for doing some specific validations. But I am not able to pass the row_id to the the mehod add_protocal_entry while multiple rows are in MP_MOD_ROWS ,since its not available MP_MOD_ROWS .
Can anyone tell me how i can get the row_id for each row in MP_MOD_ROWS.
Since I need the full row for validations , i cant use MT_MOD_CELLS.
Regards,
Suniljith.SS

Hi,
this is an excerpt of what we dir:
METHOD handle_data_changed.
FIELD-SYMBOLS:
    <dat> TYPE ANY,
    <mod> TYPE LINE OF lvc_t_modi,
LOOP AT er_data_changed->mt_mod_cells ASSIGNING <mod>.
* error case, sy-subrc <> 0 returned by MESSAGE ... RAISING
      symsg2alv_changed_data_prot( ir_cl_alv_changed_data_prot = er_data_changed
                                   is_modi                      = <mod> ).
      DELETE er_data_changed->mt_mod_cells.
using the method
METHOD symsg2alv_changed_data_prot.
MESSAGE
    ID sy-msgid
    TYPE sy-msgty
    NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
    INTO mv_msg. "for debug transparancy
ir_cl_alv_changed_data_prot->add_protocol_entry(
    i_msgid     = sy-msgid
    i_msgty     = sy-msgty
    i_msgno     = sy-msgno
    i_msgv1     = sy-msgv1
    i_msgv2     = sy-msgv2
    i_msgv3     = sy-msgv3
    i_msgv4     = sy-msgv4
    i_fieldname = is_modi-fieldname
    i_row_id    = is_modi-row_id
*      i_tabix     = i_tabix
ENDMETHOD.
I do not understand your question about row_id as this is a component lvc_t_modi table. I don't know MP_MOD_ROWS as there is only attribute MT_MOD_ROWS of parameter ER_DATA_CHANGED of event DATA_CHANGED of CL_GUI_ALV_GRID.
Regards,
Clemens

Header fixed while scrolling vertical

I'm not sure if this can be done or not. I want to put a nav bar at the top of my page and then scroll the whole page vertically. I know that I could scroll it left to right with the nav bar fixed, but is there a way to hold the nav div in place while the page scrolls underneath it?
http://gtworkspace.com/septemberMisc/

Hi,
Can you tell me how to keep the rest of the page below the header once you have set position: fixed on the header. The rest of my page just sits on top the header when I try that.
I'm using DW CS4
Thanks, Pam

Dreamweaver cs3 international edition crashes while "Find and Replace"

When i try to perform Find and Replace in Adobe Dreamweaver CS3
the program halts and crashes everytime.
aditional info:
Adobe Dreamwever CS3
international version (translated GUI)
Version 9.0 Build 53
Windows Vista
Pentium Core2duo 2gb ram
best wishes..
ozgur z

Mr David Powers thank you for your quick,
sorry to say but
the link did not work for me.
i am so ashamed to use a program that crashes while doing a simple "search and replace" action! which i had paid more than 900$.
and also it is so interesting that adobe has released new version CS4 instead of updating the buggy CS3. so the ppl who bought CS3 are dumped!
here i attach the crash error dump file that Dreamweaver creates in its configuration directory.
http://rapidshare.com/files/230314270/Dreamweaver_crash_log.mdmp
i hope it helps to diagnose and SEARCH and REPLACE the BUG.
best wishes
o.z.
edited by: OzgurZ (inserted the rapidshare link for the dump file)
Message was edited by: OzgurZ - NOT answered yet.

Customizing settings for parked document for edit lock while in workflow

Hi all,
I want to lock a parked document from edit while in workflow, I have seen in my previous project that if any document in workflow if try to change it used to give a message that 'document in wirkflow'. how to set this setting for parked documents using FIPP.
Thanks

Hi,
Please read note 169732.
It is normal that you get this errror message "Park document blocked xxxxxx" if you try to park a document for which "Release necessary" is set but "Released" flag is not set.
Normally in workflow the "Released" flag is set in a background step right before the workflow posts the documents.
regards
Waman

MOV to DVD editing in premiere and encore

Hi.. Sometime ago I bought a digital still camera which can also shoot 640x480 30fps quicktime mov files.
To edit,combine and share the videos I am planning to write them in dvd with premiere pro cs3 and encore cs3. Although I have learned some about these programs I dont know some important preferences of exporting.
Could someone please answer these questions so I know what I am doing...
1. When starting a new project or exporting to encore to make mpeg-2 DVD what should I select in field order...Lower, upper or no fields (progressive scan)?
2. Likewise is my source video coming from camera as quicktime mov interlaced or non-interlaced? If it is non-interlaced it would be ridiculous to de-interlace, right? Although I used gspot to understand that I couldnt get any information about that issue
3. When I compare my source movie and output DVD I find that quicktime movie is a little bit sharper than DVD output in my computer. Is this normal or should I sharpen it a little in premiere pro before outputting to encore?
4. As I can edit in premiere and export as mpeg-2 I dont need any other quicktime codec, do I?
This is the result I got from gspot
http://img339.imageshack.us/img339/4462/test1ce9.jpg
Thanks for the replies.

Your camera is not suited for video editing. Either use a proper video camera or use a different application.
1. Lower.
2. Depends on your camera.
3. Likely to happen. GIGO, garbage in, garbage out.
4. No.

How can I multi-edit 'fix' pics at once?

How can I select multiple photos in iPhoto and auto-fix those?

You can't in iPhoto but you can make "batch" adjustments in the edit mode, Control (right) - click on the image and select Save Adjustments from the contextual menu:
Use the right or left arrow key to go to the next photo. Again Control (right) - click on the image and this time selecdt Paste Adjustments. Use the arrow key again and repeat the process for all. You can go thru quite a few photos this way in a short time applying the same edit settings to all of the selected photos.
OT

Rendering while editing vs while exporting mpg file?

If I render my project while editing it (before exporting it), does it reduce the render time that occurs while I am exporting my final movie to mpg file?
To me, it seems like the two rendering steps are unrelated. So for simple projects - with no special effects - it seems it would be faster to NOT render the timeline while editing, but simply export the move. Is this right? Or am I missing the point?
[I'm still using PE v2 - it does what I need]

Well, yes and no.
It will make a difference to a point, since the program must digest and assimilate everything you put into it as DV-AVIs before it can output anything. (Even if you're putting in MPEGs and getting MPEGs out, it still becomes a DV-AVI while it's in the program.) So, by manually rendering, you can speed that process significantly.
But the program will still need to encode the MPEG you're outputting once the DV-AVI rendering is done.

How to edit data while loading data from W/O to Standard DSO?

Hello,
I am loading data from W/O to Standard DSO, during activation it got error out due to SID failure error for one infoobject(error is due to lowercase letter).But i can't change the infoobject setting and transformation.
Is there any way to edit the data(either in W/O DSO or in new data of Standard DSO)?
Thanks and regards,
Himanshu.

HI,
Please check what is setting there in the transaction RSKC if it is set as ALL_CAPITAL then you must atleast chage the charecter setting, write a command in transformation, load to PSA and modify (Not applicable for BI7), Remove the setting in RSKC.(Not suggested).
Cheers
Vikram

Edit Fix while in Encore

Similar Messages

Maybe you are looking for