Edit hosts file in WRVS4400N

Hi all,
Just wondering if there's a hosts file (for setting DNS name to IP address association) in Linksys routers, specifically the WRVS4400N, that can be edited? I'm living in an area where certain DNS entries are high-jacked, such as dyndns.org, and as such I can't use DDNS unless I set the host's IP address manually - ideally I'd like the Linksys router to do DDNS.
Thanks in advance!
Mike.

if your internet provider is messing around with the dns service that it provides then stop using their dns service completely and use OpenDNS instead
http://www.opendns.com
basically, this means using the publicly available dns servers from OpenDNS (see below) instead of the ones that your isp has.
208.67.222.222 and
208.67.220.220
Fill those in in the router wan connection setup page -> dns servers to use fields, give the router a normal reboot (just to make sure it uses those... but sometimes is not needed) and you're all set to go.
Message Edited by Ady on 2009-Jan-08 12:08 PM

Similar Messages

  • How to edit host file...

    I have ICS on my SK17i  . I want to edit my /etc/host file. How  is it possible.
    Solved!
    Go to Solution.

    Since host file is a system file
    You need to root your phone and then use root explorer > mount R/W > open with text editor
    May i know what actually you want to do ?
    Why do you want to edit host file ?
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • How to edit host file to fix error 3194

    how do i edit the host file to solve the error 3194 problem?

    Since host file is a system file
    You need to root your phone and then use root explorer > mount R/W > open with text editor
    May i know what actually you want to do ?
    Why do you want to edit host file ?
    Discussion guidelines.
    Message me or any other moderator to seek help regarding moderation.

  • Unable to edit Hosts file in Win7 Home Prem 64bit.

    Clean install.  Administrator account.  Unable to edit the permissions of the hosts file. There is one in the drivers\etc file, which I cannot edit. There is supposed to be one in %systemroot% \SysWOW64\drivers\etc   but there is no etc folder in the drivers folder.
     Turned off DNS Server. gpedit.msc not found when calling it in "run".  This is the first time I've used 64bit anything, so a bit of a newb in that respect. 
    Any ideas?

    Hi,
    As you would know, some of the Windows 7 users can’t save the host file how they like it. The host file itself will simply vanish what the user had done with it.
    In my scenario, I was unable to fix this even after all the instructions provided in above posts. Hence, I have come up with my own idea and luckily it
    worked.<o:p></o:p>
    For those users who experience this problem, here are the instructions to fix it.
    First of all, you should have the administrative privileges to edit the host file. In normal case, if an admin user directly go to the host file in system 32 and add his preferences
    and then save it, it should keep the changes. However, in some wicked scenarios, it will not. I had done a detailed research on this through all the available online forums and even contacted Microsoft several times with no luck.
    So, here you go with a correct solution for this problem.
    Note: If you are not comfortable with Windows OS and don’t know what you are doing, this process can mess up things.
    Hence, do not attempt if you are not 100% sure you can make it.
    Login to an administrator account.
    In the run command (Windows key + R) type, “control folders” and hit enter.
    Click on the tab called view.
    Select the radio button for Show hidden files, folders and drivers –ON.
    Uncheck the ‘Hide extension for known file types-ON
    Click on Apply and then OK.
    Type “drivers” in run command and hit enter. It will take you to where the folder “drivers” located in System 32.
    From the “drivers” folder, double click the folder named “etc.”
    Now you can see the “host” file along with others.
    Now, in the search area in start menu, type “notepad.exe” and open the notepad.exe as administrator. (In order to do this, you can right click on the notepad.exe shown and select
    “Run as Administrator.” If UAC prompted, click YES/OK)
    Now, you will have a notepad open with administrative privileges.
    At the top left side of the notepad click on “file” and then select “Open.”
    A box will appear which will allow you select the file to open. Carefully, navigate to the location where the “host” file is located. To do that, select the drive where you
    installed Windows. If you have the Windows installed in C: select ‘Local Disk (C :)’ > Windows > System 32 > drivers > etc. At this point, you might not have another option to proceed or select from. The window would be empty. To proceed further,
    select the option “All files” from the drop down menu which is located above the “Open” and “Cancel” button. You can now see all the files located in etc folder.
    Select “hosts” from the menu and click on “Open.” Note: You can either click on open or double click on the file.
    Now, you will have the host file information open in the notepad which you had already initiated before with administrative privileges.
    Make whatever changes you as you wish. (Example: If you need to block a web site called
    www.block123.com you can type 127.0.0.1
    www.block123.com right under the local hosts.
    Make sure you do not change any other letters or characters which are already saved in host file.
    This will completely mess up your computer. For more information on the information about host file, refer the Microsoft web site:
    http://support.microsoft.com/kb/972034 . If you
    have accidently delete/edit anything from host file, please delete the complete information stored in host file and copy and paste the host file information from Microsoft which is appropriate for your Operating System.)
    Click on “file” again and select “Save as” and save it in etc. If the path is showing correct to etc folder, save it to etc. If it is navigated to somewhere else, follow the
    instructions provided above and select etc folder and then save it.
    Now, go back to the actual host file location which is in System32 > Drivers > etc (You would have it already open if you had followed the instructions just like the way
    I have provided)
    There you can see 2 host files. One which has already been there and the other one you just saved.
    Among the two, one is called “hosts” and the ‘type’ would be ‘file.’ This is the original host file. The other which you have just saved will be named as “hosts.txt” with the
    file type as ‘Text Document.’
    Right click on the original host file and select rename. You can even click on that file and press F2. This will enable the option to rename the file. Rename the original host
    file as “hostold” and hit enter.
    Now, select the second host file which we have saved as a text document and rename it as “hosts.” Make sure that you DELETE the .txt file extension in order to change the type
    “Text Document” to “File” and hit enter.
    Now, you have successfully saved the host file with your preferences.
    You can now delete the file which we renamed as “hostold.”
    We are done. You would need to do this process all over if you need to edit the host file again. I know it is difficult, however, it is our own requirement and we have to invest
    few minutes on this.
    Enjoy your computer with a great feeling that you have finally edited the host file as per your wish and take it from here. Wish you luck.
    Should you have any questions, please feel free to ask.

  • Problem editing hosts file in Snow Leopard

    I am having trouble editing my hosts file in Snow Leopard. Well, I can edit it fine, but the changes seem to give no effect whatsoever.
    My hosts file looks like so:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting. Do not change this entry.
    127.0.0.1 localhost
    255.255.255.255 broadcasthost
    ::1 localhost
    fe80::1%lo0 localhost
    127.0.0.1 localhost www.localhost.com
    I cannot access localhost by entering '127.0.0.1' into my browser, nor can I access it by entering 'www.localhost.com'.
    Firefox simply tells me either 'Unable to Connect' or 'The Connection was reset', respectively.
    Is there something I am doing wrong?? I have been looking all over the internet all week and cannot see what I might be missing!
    The only way I can connect to localhost is by visiting 'http://localhost:8888/'.
    If it helps, I am running MAMP.
    Thanks to anyone who can help.

    Never mind, I found out MAMP was using port 8888 instead of 80, so I reset it and now it works fine

  • Editing hosts file SharePoint 2010 Production

    Hello,
    I have SharePoint 2010 Farm, and I have two web applications; mysite and sharepoint.
    How do I suppose to change hosts file?
    I currently have
    127.0.0.1 sharepoint
    127.0.0.1 mysite
    Do I need to put NLB IP address instead of 127.0.0.1?
    Thanks

    There isn't really a reason to use a hosts file. For Search Crawl traffic, using the HOSTS file is not the proper way to target search, instead using the Web Application property SiteDataServers, or I have a project that makes this graphical, https://crawl.codeplex.com.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to access host files?

    how to access host files?

    Easy and not depends on your software version:
    press Shift+cmd+G while your finder window is open and active, you will get a new window with the field where you can write /etc/hosts
    Anyway to edit hosts file you should open it with the sudo command, this can be done in terminal window, not in Finder. Also easy and can be done next way:
    press Shift+Cmd+U while Finder window is open and active, then choose Terminal.app, and after it opens enter sudo nano /etc/hosts. You will be asked for password - this is the password you enter then you installing new application. You should know few commands to edit your hosts file:
    Previoius page/Next Page of the file - Ctrl+Y/Ctrl+V
    Add record - Input the text you need on the last free line of the file and then press Ctrl+O
    Delete record - put cursor on the line you want to delete and press Ctrl+K
    Undo - Ctrl+U
    Exit - Ctrl+X
    After edit your hosts file you should update DNS records - in terminal window enter the command dscacheutil -flushcache
    But if you really don't know what are you doing, my advice is do not touch your hosts file, ask for professional to do his job. Just like I'm doing usually. )))

  • Yosemite Hosts file missing something

    Hello guys,
    I have MBA early 2014 Yosemite upgrade. Most forums and discussions say that the default hosts file looks like the one below
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1       localhost
    255.255.255.255 broadcasthost
    ::1             localhost
    fe80::1%lo0     localhost
    My Hosts file is identical to the one above except for is missing the
    fe80::1%lo0     localhost
    Which one is the correct Hosts file? With or without fe80::1%lo0     localhost
    I thought I'd seek clarity by posting this thread
    Many thanks for your help.

    I figured out how to fix it, i was having the same problem. go to http://www.tekrevue.com/tip/edit-hosts-file-mac-os-x/. It shows you how to add stuff to the host file. I went and added it and fixed the issues i was having.

  • Edit host lion

    In lion trying to edit host file but it will accept my password, typing will not work.
    Thanks
    Tony

    If you're using sudo in the Terminal, it is recognizing your keystrokes even though it might appear it's not.
    (70759)

  • Editing etc\hosts file on windows xp for apps. problem post installation.

    Hi all,
    I was able to install 11.5.10.2 apps on my win xp prof machine. During that process I had to edit the etc/hosts file in windows directory as a work around for that domain name field during installation. Also added the primary DNS suffix as 'suneel.com' . I gave the domain name as 'suneel.com' during installation. The RapidWiz is taking localhost as the system name and referring to this system as localhost.suneel.com, though the actual system name is 'websoft-xp' .
    The host file on Apps machine has the following entries:
    127.0.0.1 localhost
    127.0.0.1 localhost.suneel.com suneel.com
    127.0.0.1 websoft-xp.suneel.com
    So when I connect to apps login server from other systems in lan, I've to edit their hosts file and add an entry for localhost.suneel.com to point to its ip address or else the apps throws an error after logging in as operations/welcome using a different url say 192.168.1.4:8000 . Is there a way to get around this issue?
    More over I'm not able connect to VIS db from other systems. The oracle clients give an error 'No listner' at this address. (The original listener was listening at localhost.suneel.com:1521). So I tried to create a new listerner from Net Manager that actually listens at websoft-xp (the real system name) but it throws me an error 'A valid log file is required' while saving the network configuration and prevents me from saving the network configuration.
    Did I do something wrong with the hosts file during installation or did i miss any entries in that file thats causing this? Any solutions for the above problems will be appreciated?
    Thanks
    Suneel
    Message was edited by:
    suneelgv

    Well I tried that option but for some reason it didn't work for me. It kept giving the tns:connection closed error. Then I searched in metalink and found this note : Note:333158.1
    It suggested setting tcp.validnode_checking = no
    in sqlnet.ora. in
    F:\oracle\visdb\9.2.0\network\admin\VIS_websoft-xp
    And it works. Hope this helps someone facing a similar problem. Good luck.
    BTW how do I run autoconfig?
    Thanks,
    Suneel Gundlapalli

  • How do I edit the hosts file in Lion

    I tried to edit the hosts file in Lion with: sudo nano /private/etc/hosts. Then entered Password. The window came up blank evev though I know there is data there.

    Thanks BD for your response. I have looked at Youtube where they are demonstrating how to do this by using sudo nano /etc/hosts. After entering the Password it shows a screen with the text of the hosts file. On the bottom of the screen it shows the number of lines read. When I do the same thing I get a blank screen and on the bottom it says no file. I am either doing something wrong or this does not work. I even tried changing the permissions of the hosts file to R & W for system, wheel, and everyone. This also did not work. I have not tried Hostal yet but if I can't find a simple way to text edit the hosts file I will give it a try.

  • How do I edit the host file in ipad

    I would like to test our site and would like to point the URL to a different server. Is there a way to edit the hosts file similar to how you would do it on other computers?

    iPhoneView will let you get at your system files.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Can you edit the HOSTS file on an iphone?

    Is there a way to edit the iPhone equivalent of an /etc/hosts file?  This is necessary to access some internal test/dev resources on our network.  Jailbreaking is NOT an option.  Creating and installing configuration profiles via the iPhone Configuration Utility would be allowable.

    Why? There's no way they are going to pay a licensing fee for something like that.

  • HT201210 I have done all of the things on this list, to include editing the hosts file with no the same error each time (3194).  I am trying to restore my iphone 4 ios 6 to get it unlocked.  Diagnostics show no issue communicating with apple. Help.

    I am trying to restore my iphone 4 ios 6 to acheive unlock.  hit restore and it unloads software, confirms with apple then displays the 3194 error.  I have turned off my virus scanner, unplugged all usb except for iphone, edited the hosts file and run diagnostics which showes communication with apple is fine.  What do I need to do to get my ipone to restore?

    There is nothing wrong with the OS update.
    Delete ALL your email accounts.
    Restart Playbook
    Put the accounts back and ensure they are all set with PUSH ON.  Manual (push off) will burn battery.
    Similarly delete your wifi connections and add back when required. 
    Turn off wifi is not connected to wifi. 
    Any "hunting for connection" in email or wifi will burn up battery.

  • Hostsfile (hosts file) on Symbian S60 5th edition ...

    Does anyone know if a hostsfile (or similar function as a hosts file) can be installed and how it can be used on Symbian S60 5th edition (for the Nokia 5800 XpressMusic)?
    I've found on Wikipedia: ( http://en.wikipedia.org/wiki/Hosts_file ) that it should be possible, it specifies folders where the file should be:
    Symbian OS 6.1-9.0
    C:\system\data\hosts
    Symbian OS 9.1+
    C:\private\10000882\hosts (AllFiles capable only)
    but there is no more details about the needed file format, and I couldn't find any application dealing with a hostsfile on Symbian. Apparently, there used to be the Appgate Mobile Client, but I can't find it anymore.
    I would appreciate any help/clue about this. Thank you.

    Hi
    Yah  INT/5.00.50 and TW/5.00.60 on the N5230 work just fine. 5.00.50 is the last International version but it has a bug when navagating in landscape view, (the map looks out of sync, streets don't line up on the left and right side of the screen). That happens on the N97, N97 mini, N5230, and the Samsung HD, others say it happens on other Nokia phones, but I can't say that because I only have the phones I listed. Anyhow in the Tawain version 5.00.60 this was fixed. As a sidenote it has been rumored that Garmin has discontiued develpoment of there mobile XT product for Symbian because Nokia is offering their own product for free. But map updates will always work no matter what and in my opinion Garmin even without any more updates is and always will be a better mapping program than they very buggy Nokia/OVI Maps 3*..Lastly I am using Garmin on all my phones because Nokia/OVI maps 3.* turn by turn doesn't work properly on any of the phones I have, it is off by 250yards, (in back of) the actually position, (it tells you turn 250 yards after you already turned, crazy!) Whereas Nokia.OVI Maps V2.* never had that problem. I really wish Nokia would fix there current bugs before adding more buggy features...
    Message Edited by jbricci on 01-Feb-2010 12:04 PM
    Message Edited by jbricci on 01-Feb-2010 12:05 PM
    Message Edited by jbricci on 01-Feb-2010 12:08 PM

Maybe you are looking for

  • How to select a particular InfoProvider based on variable in BEx Query

    Hi,    The MultiProvider is built on InfoProvider 1, 2 & 3 and a variable on 0CALMONTH. If the 0CALMONTH is CURRENT month then it should get the data from InfoProvider 1 & 3 only, otherwise it should be from InfoProvider 2 &3. How could I accomplish

  • Can I replace a published muse site with one I have been working on?

    I have published a muse site as a holding page on a webasics plan, and while that has been live I have started a new muse file an built a website which I intended to replace the holding page with. I am having trouble figuring out how to replace a alr

  • Installing Radeon 7500

    I am going to install a Radeon 7500 PCI card is there any thing I need to do before I in stall it on this MS6378 board?

  • Enterprise Support - Populating my SM7 using SMSY_SETUP

    Hello all, my first post - be gentle! We are currently setting up our Solution Manager 7 system for Enterprise Support as we are a VAR (Value added Re-seller) We are using the documentation: "Configuration Service-Desk for VAR" When running the SMSY_

  • How to create  no ranges extension

    Hi, I am already assigened no ranges for GL/KA/KR/KZ like GL for 1000-1999 KA for 2000-2999 KR for 3000-3999 KZ for 4000-4999 But now the situation is i am post the documetns up to last number. i am taken SAP standard no ranges for vendors like 15 fo