Edit in Audition from After Effects: I need Help!

I’ve been using CS5 for more than one year and I installed CS5.5 on my PC Windows 7 professional few days ago so now I have both CS5 and CS 5.5 on the same PC. Unfortunately I don't succeed in editing the following audio files in Audition from AE (on the contrary I can do it in Audition from Premiere Pro) because it says ”file not supported by any plug-in currently registered” (see the snapshot attached). The files are: *.m2ts audio 5.1 from videocamera Sony and *.FLV
NB. I can edit these same files (with the guide of the video track too) in Soundbooth from AE CS5 and CS5.5 What can I do? Would you mind giving me some advises please? I apologize for the quality of my English. Thanks in advance. gragabo from Italy

Your file looks to be an MPEG-2 Transport Stream (from the m2ts file extension). This isn't natively supported in Audition CS5.5. You'll want to convert to a different format first.
AE and Audition use different file importers, whereas Soundbooth used the same as Pr and AE.
Format support in Audition should be improved in a future release.

Similar Messages

Can not save in Audition after using "Edit in Adobe Audition" from After Effects CC

Following the extra credit activity in Lesson 5 of "Adobe After Effects >> Classroom in a Book".
Using Win7 and everything is local on my C drive.
When i try to save in Audition I get "This file is in use by another application and cannot be overwritten"
I searched the forums including this thread (http://forums.adobe.com/message/4520401) but nothing seemed to apply to me.
Using unlocker, it seems that the piano.wav file is locked by DynamicLinkMediaServer.exe single PID but three handles. see a Piano.pkf files in folder but it is not locked and piano.wav is file showing up in audition. Quit audition a and tried again, so not sure if extra handles are artifacts from previous attempts or not.
Just learning CC, but I've been programming PCs from the beginning so quite familiar in those aspects if you need me to track things down. Seems like this has been an issue for quite some time, but not in an environment as plain vanilla as mine.
Any assistance would be greatly apprciated. The inter-program integration is a big asset to CC, but this is a major roadblock.
--greg

Go to the hardware setup - the settings for Edit View recording and Multitrack View recordings are separate, and it sounds as though one is configured correctly and the other isn't.

How to create editable .mov files from After Effects

Hi,
I am creating videos for my clients using after effects.
The requirment is that they should be able to edit the .mov files e.g adding their company name, text or logo without using after effects without losing any effects.
How can I accomplish this?
Thanks....

Unfortunately,
1.Baljeet S. Juneja,
Jun 18, 2012 1:36 PM in reply to leesando
Report
Editing video is not possible with Photoshop Elements.
Photoshop Elements is for photo editing
In order to edit videos , you should use Premiere Elements or Premiere Pro
However, Adobe does offer a combined package of Photoshop Elements and Adobe Premiere Elements, which might work perfectly for someone who just needs the most basic tools for editing both photos and video.

I can't edit my keyframes in after effects? (please help)

Okay so the other day I purchase after effects, everything was working fine until this happened:
http://gyazo.com/1ad100e3404c6e7c06e01407d2b8e7a8
(click on the link screenshot)
This is really bugging me and i've uninstalled and reinstalled with no results.
My computer's specs are in this screenshot:
http://gyazo.com/5fbeaff62b6136cd74a177e251500ac0
Just explain to me all the options i can take towards fixing this.

You simply have hidden the A/V column. Right-click on the column headers and reveal it from the list. If it has shrunk together so you can't expand it again, trash the prefs to restore factory defaults.
Mylenium

Exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?

exporting layers of audio from After Effects cs6 to Premiere / or Audition? Is this possible?
Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

Hi thanks Dave for responding - yes that could work as a 'workaround' - I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
thanks again for your help, if you or anyone has any other solution pls let me know
Best
Alex

Low quality video after import from After Effects in FCP 7, but not FCP5

Hi everyone,
I trying to export a video from final cut pro. This video has motion graphics I built in After Effects, as well as footage from my T2i camera. I then took it into FCP to drop in audio and edit all my elements together.
When I exported a 30 second preview a few days ago in FCP5, the .mov file retained the quality of the export from AE and looked great - no quality lost, smooth animations, high quality video.
However, I then upgraded to FCP7, and now the quality is lower and the video components are a bit grainy when I export using the same settings. I've tried tweaking the settings, different ways of compression, but nothing is giving me the same clean export. I've even tried changing the sequence settings and putting my footage back down.
The only other thing that's different is I compressed my T2i footage to ProRes422 before taking it into After Effects, however even the 15 seconds of original footage I didn't compress is grainy now (and so is the original and new graphic work) so I don't think that's it. When I change the timeline sequence settings, I can get it looking good in the preview - but as soon as I render it or send it to compressor it loses quality again.
The ONLY differently between the two exports was upgrade Final Cut, but that doesn't make any sense to me. I've even tried reopening the preview FCP file (which then asks me to update the file to FCP7) and when I do it exports grainy as well - and NOTHING else has changed in that file or the export settings since my initial export of a 30 seconds preview.
Does anyone have any suggestions on what the issue may be? Or, what settings I can use to retain the quality when exporting?
Thanks,
Lauren
Message was edited by: kiwikiwi

Thank you so much! Although it's not exporting quite as clear as before, it's much, MUCH better now that I've corrected the timeline dominance - I'd say 95% better; and it will be re-compressed by my clients for web streaming so it doesn't need to be perfect - but the initial quality was garbage.
I suspect when I exported my T2i footage as a ProRes file, than imported into After Effects, then back into FCP something happened along the way that messed up the quality slightly. Although the only difference in my method between FCP5 and 7 was converting to ProRes; which I only did for editing purposes as the native T2i footage needs to be rendered... which ended up being redundant as all my After Effects work needed to be rendered anyway. Ho hum.
Do you think the ProRes conversion could account for the quality loss? It wasn't just the footage that was grainy/fuzzy, it was also the After Effects graphic work, which is why I didn't think the converstion could be the culprit. Hm. I'll have to look into this more!
Thanks again - and so sorry for my delayed reply, I went on vacation shortly after I posted that message and only just got back to this project now
Message was edited by: kiwikiwi

Sound problem with exporting from After Effects

Hello everybody,
I exported a windows media video from premiere cs5 (it was shot with the cannon 7d).
The video has 1 video channel, 1 audio channel that contains a conversation, and another audio channel that contains only music.
After I exported it, I imported the video into After Effects cs5, I added some effects, and then I exported it as a windows media video.
The audio settings were:
Mode- music
codec- windows meida audio voice 9
audio format- 20kbps, 22.05 khz, mono
Even though the video from Premiere was flawless, the one from After Effects contains the conversation perfectly, but the music is very low and even erratic.
Did anybody experienced this problem?

AE doesn't deal with multiple channels. It always assumes that a file with 2 channels is stereo. You need to export the audio from Premiere separately or create a proper stereo mix, not throw two interleaved mono channels at AE...
Mylenium

Exporting from After Effects (field dominance issues?)

Hi all,
I created a FCP DV/NTSC sequence with field dominance set to none (I'm working with still images, this improves the quality a lot). I then export that sequence as a quicktime movie file and import that movie file into After Effects.
The problem is after I'm done working in After Effects, I can't export a quicktime file without it looking really poor quality. When exporting, I preserve all the original FCP sequence settings, except the field dominance settings(doesn't seem to be an option in After Effects for this?).
So pretty much I am trying to get a sharp picture when exporting in After Effects, so I can take it back into FCP. Please assist.

Your workflow is quite limited by the DV NTSC sequence. If your sequence is all stills, you are not necessarily tied to that setting at all. Do you need to output to a VTR via FireWire ultimately? What is your final output?
A better sequence choice might be DV50. You would export a QT movie, current settings. You don't actually export from After Effects. You render by adding your comp to the Render Queue. Good render settings would be DV50 (this would not require rendering in FCP), Animation, or perhaps ProRes 422 HQ if you have access to it. You would choose not to render fields.
If it's all stills, it would be better yet to simply start in After Effects.

Exporting from After Effects to Final Cut Pro

Hi
Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
Thanks for any help!
Matt

You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
Hope this helps.

Problems exporting Animation codec from After Effects CS3 to FCP

Hi,
I wonder if anybody can help: I am having troubles with video transfer from After effects CS3 to FCP 6
my workflow is to edit and export in FCP as quicktime movie - work on the clip in AE and then export as Animation/best quality/Millions of colors+. The footage is SD Pal 1024 x 576.
the problem is that the files don't seem to play back properly in quicktime - very jagged and lots of ghosting. I assume this is due to the memory heavy features of the codec.
However any file over 10 seconds will not be imported into FCP natively and a message reads final cut pro does not support this file type.
I overcame this by opening the clip in quicktime and then exporting again with exactly the same settings - this then reads in FCP - although this seems over the top
I now want to work with a 10 min finished comp in FCP but when I try to do this it picks up the ghosting that had appeared when playback in quicktime. However when rendered/ exported from the FCP timeline it retains the ghosting
in short I can burn a successful DVD of the footage as is from AE but it is not suitable to FCP.
I have tried exporting the clip in quicktime as quicktime DV pal but this retains the ghosting. Is this a hard ware problem or is my work flow wrong?
thanks
Paul

Converting from A to B means either a lossy conversion or a significant increase in storage requirements (up to 5x with DV as the starting point). You are best served with keeping conversions to a minimum.
> cause this compressor doesn't like images
What is that based on?
> in several forums I have red that "automatik" inside of encore does often not work properly
This is in contradiction with the general feelings on this forum.

What are the best setting to export video from after effects to get the best video quality ?

Hi
I am editing a raw time lapse in after effects and also some short video clips I would like to export them from after effects and upload them online afterwards but i get a bit lost in exporting settings and formats and mbps..
What are the best settings to export a video and get best quality(high) in full hd 1080 ? in 4k ? and what would be the best setting to export animations/logo/intro and get best quality ?
Thank you very much.

Thanks for reply !
I used until now quicktime in H264 codec was that OK ?
two more questions :
what are the export settings for 4k files for web/you tube ?
to play on my PC using windows media player or Quicktime player and getting the best quality ?
Thanks in advance.

HDV from After Effects to FCP - seeking advice...

I'm editing a concert which was shot with 5 cameras in Sony HDV (1080i), and FCP can actually play all 5 cameras in a multiclip synchronized with the canvas! (Dual G5, 1GB RAM) Well, it throws up an "Out Of Memory" red screen now and then, but I just ignore that and keep editing.
Now I'm creating an opening in After Effects set to HDV 1080i, and I'm wondering how to export (actually, MakeMovie) it. I've tried Animation / no compression and HDV / Keyframe every 15 frames. The Animation is about 20 times the file size of the HDV; they both play in FCP RT with some stuttering, they both render in the same amount of time, and they both look identical after rendering.
Can anyone suggest any other ways to export from After Effects so it will play without rendering in FCP?
I have a haunting feeling that if the GOP of the imported clip does not match the GOP of the timeline, I have to render. But I don't know how to detect the GOP of either.
Arghhh... how I suffer for art! Any suggestions would be welcome!

Hi James ... Yup, that's right, stacked on top of each other with opacity lowered on both as well! (I do like Macpros my old G5 went red when talking about HDV in the same room!!). I have though managed to replicate Seths problem by not using the same size comp. settings in AE. ie if my comp settings in AE are 320x 120 and I try resizing when rendering that seems to throw FCP off track, but if the AE comp settings are 1440 x 1080 and rendered at the same using HDV 1080 then FCP treats the quicktime footage as the same as Sony HDV.

Export a 3D title text from after effects to my desktop

I am having trouble exporting my 3D title text from after effects to my desktop to use in premiere pro...sending to render que but won't render for export. Am I missing a step?

It would help if we knew your render settings, your experience level with AE, a little more about your workflow. Even knowing what version of AE and what OS may be helpful. This is probably just user error. Normal workflow would be to add the composition to the render cue, select a folder (the desktop is a lousy place to store assets by the way) and then press render. Without changing anything you'll get lossless DIm (digital intermediate) suitable for use in any NLE but not suitable for playback. If you need transparency then you should select lossless with alpha in the output module from the pull down.
If you want something else then tell us more.
Inside AE, if you see a search help field at the top right corner of the app type in 'rendering,' press enter, then read through the first two articles.

Printing to tape from After Effects

Hi,
Does anyone know if I am able to print on HD cam from within After Effects, I'm using a black magic card,
thanks for any help

You can't print to tape directly from After Effects. You need to render to the same codec you used to capture footage, then use the same program you used to capture. Premiere Pro or Final Cut, or whatever...
Actually, you can render to any Codec you'd like if you bring the footage back into your NLE for export or print to tape.

When I add my composition to the Adobe Media Encoder from After Effects, it renders out incorrectly?

Why is it that when I add my composition directly from after effects to the adobe media encoder, it renders out of the adobe media encoder incorrectly? By that I mean the video comes out a little scrambled- parts of it overlap other parts. Is this an issue with 'dynamic link'? Did I do something wrong? I'm working in CC.

I also don't understand what you are saying. What do you mean by "parts of it overlap other parts"? A screen shot might help.
What were your render settings in AME? (Format, Codec, data rate, etc.)
What is in your AE comp? If footage, tell us what format, codec, etc. Tell us what effects were used too.
What exact version number of AE CC are you using?

Edit in Audition from After Effects: I need Help!

Similar Messages

Maybe you are looking for