Edit in HD, memory problem?

Hi there,
Just starting for editing HD footage but wondering should I get more memory for computer because testing to editing a 15 min. footage when export only first 2-5 min. movie I got, the rest is a still image (only last freeze frame when reach 5 min.). After that, I've tried to cut the footage in 2 min. than export fine. Is that the memory problem? Please advice.
Thanks.

Hi
a. Free space on Start-up Mac OS hard disk. How much ?
b. Is there any more hard disks ?
I have figured that my Mac works best with
• Macintosh HD / Mac OS and FinalCut
• Second internal HD - ALL Scratch and All material Audio/Photos etc. on this
Nothing to movie project on first one
alt
second HD as a FireWire - and IMPORTANT - Mac OS Extended formatted ! !
Yours Bengt W

Similar Messages

Memory Problem with SEt and GET parameter

hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
       v_nbc like eban-bsart,
       v_nbo like eban-bsart.
       v_nbc = 'CAPX'.
       v_nbo = 'OPEX'.
       v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
    if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
       or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
      set parameter id 'ZC1' field v_nbc.
    elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
      set parameter id 'ZC2' field v_nbo.
    elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
      set parameter id 'ZC3' field v_nba.
    endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
   FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
Ranveer

Hi,
   I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
       v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
       v_second TO MEMORY ID c_memid.        "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
         v_second TO v_fcode_2
FROM MEMORY ID c_memid.                                   "ZCCBPR1
FREE MEMORY ID c_memid.                                   "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM

Nokia C5-03 Low memory problems ( Other Files )

Please help. I have a nokia C5-03 the handset is showing phone memory is full. I have checked and uninstalled all unecessay applications. But problem is still there. when i check the phone memory it indicates that i have other files of 42mb installed and using phone memory. however i am unable to check what other files are installed or classfied as other files. Can you please assist me so i can know what these other files consist of or where they are located.

Hi Thetao,
I typed a more extensive reaction before, but it got lost when I pressed "post". Therefore I just respond to the main points that you mentioned (and some I found out myself).
Strange: I can't find the 40 MB Maximum User Storage on the Nokia website anymore (nor the 75 MB). But it sounds very familiar to me. It looks to me as if they removed this from the phone specs, also of other Smartphones by the way.
Yesterday, I deleted some small apps that I don't use (anymore) such as InternetRadio and I also removed Nokia email. Although the apps were below 2 MB together, this freed up over 7 MB of Phone memory (24 MB free now)! I think there were still some old emails stored in C: which I couldn't delete any other way. This helped me a great deal already but I tried your suggestions as well.
1. No map data or CITIES folder on C: 2. Switched messages memory to phone (and phone to offline mode) and I did indeed find a forgotten email account with 30 email messages. Not much but I had 24,7 MB free after that. Of course, I put messages memory back to the memorycard. 3. Used the free edition of Y-Browser to manually delete the cache folder. Not much data in that, but 25,1 MB free after that. Nice tool, with which you can reach folders that normally stay hidden! Used YBrowser to search all C: for files over 300 kB. Only 2 files: boot_space.txt in C:\ (500 kB, contains only the X repeatedly as far as I see, but is probably essential for the operating system) and C:\resource\python25\pyton25.zip (1 MB). It looks like an installation package, but I'm not sure if I can delete it. By the way: YBrowser hasn't made a shortcut in one of the menus. Only way that I found to start it was to look for it using the Phone's search function. Is there a way to make this shortcut myself?
4. Yes I did. No Images folder on C: anymore, nor other big files (see point 3)
5. I use Bluetooth for file transfer sometimes, mainly for installation files (such as YBrowser.sis, but I did this one via USB-cable). However, no big files are left on C: so I don't think I have this problem.
6. I tried to delete Nokia Chat yesterday as well (with the other apps), but it won't be uninstalled the normal way as it says "Uninstall cancelled" (not sure about the exact translation since my phone 'speaks' Dutch) Do you know if there's another way to get rid of this 3 MB app that I don't use at all?
I think I may have found an explanation and a solution for the memory problem while navigating. You mentioned the "memory in use" in the map settings. Above that option there's a slide bar for the % of memory that the navigation can use. Standard is 70%. I always thought this was about storage memory on (in my case) the memorycard. Another topic mentioned that this the working memory (so the RAM) that the navigation may use. Setting it to 70% means there's only 30% left for other apps that run in the background. The other topic states that this is nog enough so the slider should be set to for instance 30% for navigation leaving 70% free for "the phone". From behind my computer, navigation seems much more stable. I'll try this setting in my car soon and let you know how it works.
Thanks a lot for thinking along with me so far! There's already 25,1 MB of space, which is great since it was only 7 MB last Sunday. And navigation looks more stable. I'd appreciate if you have some more answers to my latest questions, but if not I think my phone will work a lot better already!
Regards, Paul

Memory problem with 5330 XpressMusic

Hi,
I seem to have a memory problem with my 5330, I have a 1Gb micro disc installed. My son sent me a photo from his phone, when it arrived I got a warning on the scren that 'there is not enough memory to receive messages', I have tried to delete as much as I can, a lot tells me I can't delete it, but I still get the same warning. This warnig shows up each time I switch on the phone. How can I get myself more space? Can I move things from the phone memory to the memory card?
Gerald
Message Edited by warmbells on 01-Nov-2009 06:19 PM

Are you sure you're using a 5330 XpressMusic? Or is it a 5320 XpressMusic? The former is yet to be released, AFAIK.
Assuming that you are using a 5320, try these steps:
-> Move all photos, music, videos stored in the phone memory to the memory card. You can use the built-in File Manager to accomplish this.
-> Delete all files that you would've received via bluetooth, present in your Inbox. You can save them to the mass storage.
-> Clear the browser cache.
-> Clear the Sent Items folder.
-> Make sure you don't have too many messages in your inbox.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Memory problem with loading a csv file and displaying 2 xy graphs

Hi there, i'm having some memory issues with this little program.
What i'm trying to do is reading a .csv file of 215 mb (6 million lines more or less), extracting the x-y values as 1d array and displaying them in 2 xy graphs (vi attacked).
I've noticed that this process eats from 1.6 to 2 gb of ram and the 2 x-y graphs, as soon as they are loaded (2 minutes more or less) are really realy slow to move with the scrollbar.
My question is: Is there a way for use less memory resources and make the graphs move smoother ?
Thanks in advance,
Ierman Gert
Attachments:
read from file test.vi ‏106 KB

Hi lerman,
how many datapoints do you need to handle? How many do you display on the graphs?
Some notes:
- Each graph has its own data buffer. So all data wired to the graph will be buffered again in memory. When wiring a (big) 1d array to the graph a copy will be made in memory. And you mentioned 2 graphs...
- load the array in parts: read a number of lines, parse them to arrays as before (maybe using "spreadsheet string to array"?), finally append the parts to build the big array (may lead to memory problems too).
- avoid datacopies when handling big arrays. You can show buffer creation using menu->tools->advanced->show buffer allocation
- use SGL instead of DBL when possible...
Message Edited by GerdW on 05-12-2009 10:02 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is XML Publisher causing shared memory problem..?

Hi Experts,
Since this week, many of the Requisition/PO are erroring out with the below errors or similar to these errors:
- ORA-04031: unable to allocate 15504 bytes of shared memorny ("sharedpool","PO_REQAPPROVAL_INIT1APPS","PL/SQL MPCODE","BAMIMA: Bam Buffer")
ORA-06508: PL/SQL: could not find program unit being called.
-Error Name WFENG_COMMIT_INSIDE
3146: Commit happened in activity/function
'CREATE_AND_APPROVE_DOC:LAUNCH_PO_APPROVAL/PO_AUTOCREATE_DOC.LAUNCH_PO_APPROVAL'
Process Error: ORA-06508: PL/SQL: could not find program unit being called
Few days back we were getting heap memory error for one of the XML Publisher report.
I heard that XML Publisher requires lot of memory for sources/features,So I want to know whether XML Publisher can be one of the cause for memory problem to occur or this shared memory is not related with XML Publisher sources at all.
Please advice.
Many thanks..
Suman
Edited by: suman.g on 25-Nov-2009 04:03

Hi Robert,
Thanks for your quick reply...
Apps version: 11.5.10.2
database version: 9.2.0.8.0
As I am a beginner in this so dont know much about this.. Can you please guide me on this.
DBAs has increased the shared memory and problem has resolved but here I am more concrened whether the XML Publisher was or can be one od the cause for shared memory problem. Is there any way to check that or this occurs randomly and we can not check this.
Please advice something.

InDesign CS4 memory problems

I have had memory problems with InDesign CS4 (and also with Photoshop CS4) for about a year now. If my file has a lot of pictures (100+) at some stage I get error message "Out of memory" . In the beginning it just have problems with redraw pictures (half of picture stays black), but also export to pdf is halted by same message and printing to file also. No problems in the beginning of large files or with files with text only. At one point InD just has enough and starts to behave like a ... Only solution is to export InD CS4 file as INX and continue to work in CS3 (but it takes a long time to match the text flow because textengine works differently). It's not monitor, because I have changed monitor during this year (from LaCie 22 blue IV to EIZO 27"). It seems that it's not video (NVIDIA GeForce 9800 GTX, 512 MB) also, because everything functions normally with CS3. I know, that it's not a proper video card for my work, but one likes to play Bioshock sometimes... Something strange happens with Photoshop CS4 also when I work for a long time without shutting down the program. After about editing 60+ pictures Photoshop CS4 begins to slow down (specially with using clone tool).up to impossible to work. You just have to wait while the cursor is dragging itself to right place an picture is redrawing itself. Seems like memory cannot empty itself and gets overloaded when working with CS4. No problems with Photoshop CS3. One cannot notice anything with small files. I can work with CS3 but there are features I would like to use in CS4.
Have anyone experienced anything similar?
Claudius
Win XP SP3
4GB RAM
video NVIDIA GeForce 9800 GTX 512MB with latest drivers
CS4 and CS3

Having exactly the same here. 16 Gb of ram in an 8 core 64 bits Vista system. Absolutely no infections on my system. Having great troubles getting my work ouputted.
I'm making an overview with 50 cards with pictures in them and bevels on the edges, dropshadows. It might be heavy but it is a normal question from my client.
I don't care if transparency is difficult for Adobe to handle. They shouldn't make it public if it is not properly tested. I am now so far as to make the composition in photoshop ( if that works)
What I thought was the problem is that I originaly placed indesign files in frames. But there is a great script out there on www.automatication.com to convert that in editable object again. Works great so check that out. But this didn't solve my problem. The effects used in these items are the memory consummers and Adobe is not freeing the memory properly.
Advise to Adobe: check also to dropshadows feature because this is not scaling up or down with the rest of the effect.
I'm am writing a realtime 3D renderengine here, if CS5 is not working fine, I might digg in to this one as well, getting a bit tired of waiting for properly working software.
Jaap Clarenburg
[email protected]

ODBC Linux Memory Problem

Hi,
I seem to have a big problem with an application I've made.
The application connects to a Oracle Database, fills the database with arround 1GB of information. Once the database is filled my application launches a series of queries to test performance.
My problem is when working with Oracle 11 in Linux (Fedora and Oracle Enterprise Linux). Apparently I can't seem to get past the database filling process. The free memory vanishes quite fast, eaten up between my application proces' and Oracle's. Now, I know the problem is not with my application because the same code works perfectly in the following databases:
Windows:
- Oracle 10R2
- Oracle 11g
- PostgreSQL 8.3
- MySQL 5.1
- MySQL 6-alpha
- SQL Server 2005 Express Edition
Linux:
- PostgreSQL 8.3
- MySQL 5.1
- MySQL 6-alpha
My application actually connects to the database and starts executing the inserts successfully. It's just that at some point the memory gets filled up, pretty quickly actually. I've watched the through vmstat. The first one to fall is the free memory, then follows the cache memory. And then it starts filling up swap. When it reaches to 2GB of used swap the behavior differs with the Linux Distribution: Fedora Core 8 crashes horribly, in Oracle Enterprise Linux at some point my application's process goes to "sleep" and I seem to still be able to do other things.
To connect to the database I use the [OTLv4 library|otl.sourceforge.net]. One might think that my problem is with OTL, but I use the same OTL in all those cases, and unless it's an issue between Oracle in Linux and OTL I don't think it's an OTL issue.
Can anyone push me in some direction ?
Thanks.

Well, you seem to have a memory leak in your application, assuming nothing else is running. Check out the top(1) program; you can get it to sort the displayed processes according to how much %MEM (percent of memory) they are using. First entry is the culprit.
The best way I've found to locate a memory leak is to run your program using valgrind(1). This tool runs your application in a virtual CPU built in to valgrind(1). It can detect tons of different memory usage issues, from using an un-initialized variable to leaked memory.
Of course, you may not have a memory problem. Does you program generate huge bursts of I/O or is the I/O more evenly paced? Kernel I/O backlog can consume memory quickly. While your application is running, open two more windows. In one, run the command:
$ watch -n3 -d cat /proc/meminfo
and in the other:
$ watch -n3 -d cat /proc/slabinfo
Try to figure out what memory usage is steadily increasing; that can tell us if the app is leaking or the I/O channels just can't keep up.
Hope this gives you some ideas about how to proceed.

Sound Problem Plus Memory Problem

I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
Windows 7 64 bit Home Edition
EVGA P55 FTW Intel P55 Socket LGA56
Intel Core i5-750 2.66Ghz 8M LGA56 CPU
Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
Ultra LSP750 750w Power Supply
Seagate TB Serial ATA HD 7200/32MB
Cooler Master HAF 932 Full Tower Black Case
Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
PROBLEM ONE:
This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
PROBLEM TWO:
The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
ps.
This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

Hello,
cannot help with the sound problem.
For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
Make a clear cmos. Then boot the computer with only one stick of ram in the port .
If everything is fine, turn off and add the other port of the same color for dual channel.
If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

Flex 4 RichEditableText out of memory problems

Hello, we're conducting performance testing on the UI of a productivity application we're developing using Adobe AIR. We are using Flash Builder 4 public beta. One part of the performance test is updating the textFlow property of a RichEditableText control every 5 seconds with random data that contains several paragraphs and several images (to mimic a typical news article). We used TextFlowUtil.importFromString(str) to convert the raw data to a textFlow object.
We found that the above test with the RichEditableText control would quickly crash the AIR runtime with presumably out-of-memory problems. If we switch to using the (read-only) RichText control, the problem went away. The only material difference between the two controls we could find in the documentation is that the RichEditableText control supports unlimited undo/redos as long as it retains focus. Could this be the source of the memory problem? Regardless, can its behavior be modified to avoid the out-of-memory problems?
The use case we are trying to simulate is having the productivity app open for weeks at a time, with constant editing and going back and forth between different workflows.
Thanks for your help, and please let me know if you need additional information

Try a more recent build.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Error 1001 + Memory Problem

So after 2 system crashes I went looking online for the cause of the event ID error 1001. My search led me to this forum where I learned about a memory test which ended up informing me that I had a memory problem.
Error 1: Playing Minecraft when crash occured
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff96000136884, 0xfffff88009dd4030, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042511-25880-01.
XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck"
/>
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2011-04-26T03:30:32.000000000Z" />
<EventRecordID>153358</EventRecordID>
<Correlation
/>
<Execution
ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>llama-7</Computer>
<Security
/>
</System>
<EventData>
<Data Name="param1">0x0000003b (0x00000000c0000005, 0xfffff96000136884, 0xfffff88009dd4030, 0x0000000000000000)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">042511-25880-01</Data>
</EventData>
</Event>
Error 2: Exiting Starcraft 2 when crash occured
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff880043ca6fa, 0xfffff88003f45788, 0xfffff88003f44fe0). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042711-29421-01.
XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck"
/>
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2011-04-28T03:22:40.000000000Z" />
<EventRecordID>158441</EventRecordID>
<Correlation
/>
<Execution
ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>llama-7</Computer>
<Security
/>
</System>
<EventData>
<Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff880043ca6fa, 0xfffff88003f45788, 0xfffff88003f44fe0)</Data>
<Data Name="param2">C:\Windows\MEMORY.DMP</Data>
<Data Name="param3">042711-29421-01</Data>
</EventData>
</Event>
So now I come to the community with a cry for help. I am a pretty tech savvy guy but I have never come across this kind of problem before and I don't know what to do from here. I have contacted the memory manufacturer and am awaiting a reply.
Does a memory problem mean I need to replace my RAM?
EDIT:
I ran the memory test again and this time Windows
did not find any memory problem!!
So now I don't even know what is going on.
PC Specs:
Asus CG Series
Win 7 Home Premium 64-bit edition
AMD Phenom II X6
Radeon 5770 Graphics card.
8GB RAM

*                        Bugcheck Analysis
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (7e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880043ca6fa, The address that the exception occurred at
Arg3: fffff88003f45788, Exception Record Address
Arg4: fffff88003f44fe0, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
fffff880`043ca6fa 4d8b1b          mov     r11,qword ptr [r11]
EXCEPTION_RECORD: fffff88003f45788 -- (.exr 0xfffff88003f45788)
ExceptionAddress: fffff880043ca6fa (dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0x0000000000000f3a)
   ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: ffffffffffffffff
Attempt to read from address ffffffffffffffff
CONTEXT: fffff88003f44fe0 -- (.cxr 0xfffff88003f44fe0)
rax=fffff8a002cdcbd0 rbx=0000000000000000 rcx=ffdff8a010f6f0e0
rdx=fffff8a00d5acec0 rsi=fffff8a010f6f010 rdi=0000000000000000
rip=fffff880043ca6fa rsp=fffff88003f459c0 rbp=fffffa8008ec9000
r8=0000000000001000 r9=0000000000000000 r10=0000000000000001
r11=ffdff8a010f6f118 r12=0000000000000000 r13=0000000000000001
r14=fffffa8008a77ac0 r15=fffff8a010f6f118
iopl=0         nv up ei ng nz na po cy
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b             efl=00010287
dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0xf3a:
fffff880`043ca6fa 4d8b1b          mov     r11,qword ptr [r11] ds:002b:ffdff8a0`10f6f118=????????????????
Resetting default scope
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: ffffffffffffffff
READ_ADDRESS: ffffffffffffffff
FOLLOWUP_IP:
dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
fffff880`043ca6fa 4d8b1b          mov     r11,qword ptr [r11]
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff880043ba25d to fffff880043ca6fa
STACK_TEXT:
fffff880`03f459c0 fffff880`043ba25d : fffffa80`08a77ac0 fffff8a0`10f6f010 fffffa80`0b18f000 fffffa80`08ec9000 : dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+0xf3a
fffff880`03f45b30 fffff880`043b5358 : fffffa80`08db9810 00000000`00000080 00000000`00000000 fffff880`03f45ca0 : dxgmms1!VIDMM_GLOBAL::ProcessDeferredCommand+0x96d
fffff880`03f45c50 fffff880`043d316d : fffffa80`00000000 fffffa80`06a15010 00000000`0000000f fffff880`043d4f09 : dxgmms1!VidMmiProcessTerminationCommand+0x4c
fffff880`03f45ca0 fffff880`043d23f8 : fffff880`0308cfc0 fffffa80`077c2c00 00000000`00000000 fffffa80`06a15010 : dxgmms1!VidSchiSubmitDeviceCommand+0x39
fffff880`03f45cd0 fffff880`043d1e96 : 00000000`00000000 fffffa80`077c2c00 00000000`00000080 fffffa80`06a15010 : dxgmms1!VidSchiSubmitQueueCommand+0xb0
fffff880`03f45d00 fffff800`03169cce : 00000000`0ce38485 fffffa80`08a88a10 fffffa80`069aa990 fffffa80`08a88a10 : dxgmms1!VidSchiWorkerThread+0xd6
fffff880`03f45d40 fffff800`02ebdfe6 : fffff880`03088180 fffffa80`08a88a10 fffff880`03093040 fffff880`0122c384 : nt!PspSystemThreadStartup+0x5a
fffff880`03f45d80 00000000`00000000 : fffff880`03f46000 fffff880`03f40000 fffff880`03f45680 00000000`00000000 : nt!KxStartSystemThread+0x16
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: dxgmms1
IMAGE_NAME: dxgmms1.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce799c1
STACK_COMMAND: .cxr 0xfffff88003f44fe0 ; kb
FAILURE_BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
BUCKET_ID: X64_0x7E_dxgmms1!VIDMM_MEMORY_SEGMENT::EvictResource+f3a
Followup: MachineOwner
0: kd> lmvm dxgmms1
start             end                 module name
fffff880`0439a000 fffff880`043e0000   dxgmms1    (pdb symbols)          c:\symbols\dxgmms1.pdb\0901C357E9E846EE8C2FBCC8107163201\dxgmms1.pdb
    Loaded symbol image file: dxgmms1.sys
    Image path: \SystemRoot\System32\drivers\dxgmms1.sys
    Image name: dxgmms1.sys
    Timestamp:        Sat Nov 20 10:49:53 2010 (4CE799C1)
    CheckSum:         00047A89
    ImageSize:        00046000
    File version:     6.1.7601.17514
    Product version: 6.1.7601.17514
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.7 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     dxgmms1.sys
    OriginalFilename: dxgmms1.sys
    ProductVersion:   6.1.7601.17514
    FileVersion:      6.1.7601.17514 (win7sp1_rtm.101119-1850)
    FileDescription: DirectX Graphics MMS
    LegalCopyright:   © Microsoft Corporation. All rights reserved.
The BSOD is caused by dxgmms1.sys which belongs to DirectX Graphics MMS.
Try to install that and check if this solve your problem:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displayLang=en
This posting is provided "AS IS" with no warranties or guarantees , and confers
no rights.
Microsoft Student Partner
Microsoft Certified Professional
Microsoft Certified Systems Administrator: Security
Microsoft Certified Systems Engineer: Security
Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration

Computer freeze / Memory problem?

Hi,
I assembled my new PC approx. 1 month ago (full spec attached at the bottom of the message).
Since then I'm having a lot of freezes (freeze, not BSOD). I tried using several OS versions with no luck, so I though it's a memory problem.
Testing the memory, each dimm by itself, with memtest86+ succeeded. I even tried to check each of the memory banks and the test still succeeded.
When testing with more than one dimm (both with single-channel and dual-channel configuration) I'm getting freezes during the check.
What could be the problem?
Thanks!
The full spec:
Case: Thermaltake Armor+ ESA VH6001BWS
PSU: Thermaltake ESA 850W
CPU: Intel Core 2 Extreme QX9650
CPU Cooler: Thermaltake BigWater 780e ESA
Motherboard: MSI P7N2 Diamond (Bios version is 1.1, this also occurs at 1.0)
Memory: 4 x OCZ DDR3 PC3-12800 Platinum 2GB (OCZ3P16004GK), 8GB Total
Sound card: MSI X-Fi Xtreme Audio (the one that is bundled with the P7N2)
GPU: MSI GeForce 280 GTX OC
OS: Windows Vista Ultimate with SP1 - x64 edition
The system is not overclocked at all, All the bios settings are set to default.

Quote from: John_Doe on 18-January-09, 02:38:37
OK, That's what I did:
Changed back the clock speed to auto (it was auto set back to 1333MHz), Changed the voltage of the memory and the NB back to "Auto".
Then I changed the memory to work as 9-9-9-24 and tested it with 2 dimms in a dual-channel configuration.
So far, It's looks like it's working and working well (2 passes completed successfully).
Quote from: John_Doe on 18-January-09, 02:38:37
Assuming that the tests will go smooth, I would like to ask if this is a recommended configuration to stay with (1333MHz, voltages at "Auto", memory set to 9-9-9-24)?
Running those dimms not at overclocked & overvoltaged (and even in "lower speed" then it should) should prevent them from having short lifetime, Am I right?
Yes, because their DDR3 chips have been designed to work at 1333MHz with 9-9-9-24.
"Have been tested to work at 1600" is another fish in another (OCZ) ocean.
good luck

Powerbook G4 freezes on me - memory problems..?

Hi all,
I have just bought a new Powerbook G4 15inch as i read all sorts of varying articles on Macbook Pro's teething problems with Adobe etc so decided to go for the tried and trusted good old Powerbook.
So i got the retailer to boost it from 512mg to 2gb in the shop and after giving it a good workout (installing Illustrator, photoshop, microsoft etc) and playing with Itunes i find that it freezes on me every 15mins or so..! I'm told it could be a memory problem (maybe the 2 new 1gbs are not compatible). Or should i reinstall Tiger..?
Any advice is welcome.. help..!
G4 powerbook 15inch Mac OS X (10.4.2) 1.67GHZ 2gigabytes 100GB

Hello, Shane,
No, I've not had trouble with freezes on my powerbook. I did have a little trouble clicking in the RAM on the top slot properly, both on my PB and on a friend's, but in these cases, the PB beeped three times on startup (RAM "distress signal").
It has been my understanding that system freezes are often caused by faulty hardware--RAM, a peripheral device that is misbehaving, or a more serious problem such as logic board.
Running the hardware test in extended mode would help with this.
Some people have reported that they have solved system freezes when all the hardware checks out by doing an archive/installation of their operating system, or erasing the drive and re-installing from scratch.
Good luck.
Maxit
Message was edited by: Maxit
I also would be remiss in not pointing out that since your Powerbook is new, Apple is available to help you troubleshoot, and in case there is a serious hardware issue, making an early report is advisable.

Mouse and memory problems (975X Pl pe)

First Hello,
this is my first post here, hope you can help me
PC configuration in my signature
OK. Here goes
1.   And most annoying problem – mouse problem (A4tech NB-90 mouse, connected to usb)
Mouse stops working, randomly (maybe once every month). It’s happening when booting windows. Mouse doesn’t work, actually all the led’s are blinking but it’s not recognized by windows. Disconnecting and reconnecting doesn’t work (nothing happens). Rebooting windows doesn’t help (still not working).
Solution to my problems is to shutdown the computer and disconnect the power cable from my PC, then reconnect it again and start the PC all over again. NOW it’s working!! WT ?
I tested mouse (3 months) on the other pc and it works OK there, so he is not the problem.
o yea, I formated hdd, and installed fresh windows and still no luck.
2.   Memory problem on 800MHz – I think this is because of incompatibility with motherboard or too weak psu
By default (motherboard)memory works on 667MHz. (and with this setup everything is fine)
The problem starts when I put it on 800MHz in bios – than system becomes instable (random reboots)
a.   Memory tested with memtest at 667MHz (both and than separate modules, 4 hours each test) -> NO ERRORS
b.   Memory tested with memtest at 800MHz (both and than separate modules) -> Never saw so much errors in my life :(
I doubt I’ll solve this problem (except buying new memory modules), but you guys know more than me so I’ll let you decide.
and yeah, sorry for my bad English!
Thanks
Bas
edit: memory problem solved. Patriot @ 800MHz needs 2.0V

hehe here you go
Quote
F E A T U R E S
PSD21G8002
Patriot Signature DDR2 1GB CL5 PC2-6400 (800MHz) DIMM
• PC2-6400 (800MHz) Data Rate
• 240-Pin Dual in-line memory module
• Non-ECC Unbuffered
• 2 Rank Double-sided module
• 7.8US Refresh Interval
(8192 CYCLES/64MS)
• 1.8V Power Requirement
• Auto and self refresh capability
• PCB height: 1181 (mil)
• Serial Presence-Detect (SPD)
• 100% Tested
• Lifetime Warranty
• RoHS Compliant
Quote from: Maesus on 26-March-07, 20:51:54
well... check the spec on website.

Memory Problems with Adobe PDF iFilter for 64-bit

In preparation to rebuild my Windows Search Index, I installed the Adobe PDF iFilter for 64-bit on my system (Vista Business 64). When I finally rebuilt the index, I wasn't too surprised by what I saw happen, namely, the SearchFilter.exe process would kick in whenever I wasn't using the system and just eat RAM. One time I turned it on and it had allocated over 4,000 MB (and my system only has 4,030 MB available) so of course it was forcing all the other processes to hard fault (ie. everything was moving like molasses--for example, it took 20 minutes to put the thing to sleep). But I just let it do it's work, figuring that perhaps this was to be expected relative to the small library of PDF's that I've accumulated on my computer, ranging from LaTeX generated text files, to containers for hi-res scans. So, after a day and a half of basically not using my laptop, everything finally calmed down and I enjoyed the benefits of searching the content of my library from the Windows Start menu--for a short while.
However, to my dismay I've encountered the problem that this freezing of my computer would now occur after everytime I download a new PDF (in this particular case they were Google Books scans) and then left the computer to idle. Again, the SearchFilter.exe would allocate all of my RAM for itself and just push everything else onto the Virtual RAM, which means the SLOWEST possibly fetching you can get. I had to uninstall as this was making my computer unusable for 15-30 minutes after each idle. Everything is back in working order without the iFilter, but I would like to know if anyone has reported such problems on x64 systems. Obviously, I will also report the problem to Microsoft, since the search engine should certainly have the precaution to handle such memory problems.   However, it is a problem that is created by the Adobe PDF iFilter interacting with the Windows Search engine.

Hello,
We believe we have figured this out. It looks like it has to do with the length of the default folder location for the Adobe iFilter.
I was able to reproduce the issue and the following resolved it for me. See if this resolves it for you all as well.
Here is how to get Adobe Version 11 PDF filter to work.
1 . If you haven’t already, run the following in SQL Server:
Sp_fulltext_service ‘Load_os_resources’, 1
Go
--you might also need to run:
sp_fulltext_service ‘Verify_signature’,0 --This is used to validate trusted iFilters. 0 disables it. So use with caution.
--go
2. Stop SQL Server. (Make sure FDHost.exe stops)
3.
Uninstall the Adobe ifilter (because it defaulted to having spaces or the folder name is too long).
4.
Reinstall the Adobe iFilter and when it prompts for where to install it, change it to: C:\Program Files\Adobe\PDFiFilter
5.  Once the installation finishes, go the computer’s Environment variables. Add the following to the PATH.
C:\Program Files\Adobe\PDFiFilter\BIN
NOTE: it must include the BIN folder
NOTE: If you had the OLD location that included spaces, remove it from the path environment variable.
6. Start SQL Server
7.  IF you had an existing Full-text index on PDFs, drop the full-text index and recreate it.
8. You should now get results when you run sys.dm_fts_index_keywords('db','tblname') --Note: Change db to be the actual database name and tblname to be the actual table name.
Give this a try and see if this fixes yours.
Sincerely,
Rob Beene, MSFT

Edit in HD, memory problem?

Similar Messages

Maybe you are looking for