Edit in Html mode in content holder and everything dissapear

Everytime I try to edit in Html mode in business business catalyst. All the content will disappear.
Now my whole header is gone! and don't look like i can undo it

This normally happens if the html is malformed, with no close tags or incorect formation, the editor tries to fix that up but sometimes will just loose it.
Also it is only XHTML compliant, so if you do any HTML5 it wont know what that is.
Really try and avoid doing html stuff in that html view of the editor.

Similar Messages

How to export photos with editing from preview mode to hard drive and external hard drive?

I have applied changes to the photos in the preview mode. Unfortunately, I can't export them from preview mode to hard drive and external drives. Whenever the external drive is plugged, the changes I made are not applied to the photos on the both hard drives.

Sorry what do you mean Preview Mode? There is no Preview mode or module in LR. There is a Library and Develop module in LR. The Library module does have the ability to do some adjustments and the Develop module has all the image adjustments.
In any event to export an image you can either right click on it and select Export or when in the Library module you click the button that says Export.

Switching Content Area Portlet Edit/View Folder Mode

The current Content Area Portlet included with Portal 3.0.8 works fine except that it does not include the "Main Banner" nor the "Sub Banner". This means that portlet users do not have access to either the "Edit/View folder" function nor the current folder name.
My customer would like some users to have item upload capability. What are my choices without these banners? I can access the content area in "full page" mode and have the banners available. But this is undesirable since we would like the content area to stay "in the portlet" in order to maintain portal context.
I might be able to switch the edit/view function from another portlet on the same page if I pass the p_edit and p_mode parameters to redraw the multiple portlet page correctly. I have tried passing p_edit using the portlet reference path "&162_KCPCONTENTAREA_6429252.p_edit=1", but the Content Area Portlet does not respond. What else do I need to do? Is this even possible?
I would appreciate any advise you can provide.
Thanks, Wendel Yale

I have determined that there will be be an edit link included in the Content Area Portlet in the 3.0.9 release due out in May. This leaves open the question of support for parameter passing for out-of-the-box portlets. Will (Is) this supported?

In mozila 3.6 or higher version as i install Browser Highlighter addone then in my site when i edit any html content in fck editor or in tiny mce editor then it add a script name gwproxy how i can solve it

in mozila 3.6 or higher version as i install Browser Highlighter addone then in my site when i edit any html content in fck editor or in tiny mce editor then it add a script name gwproxy its happend with 3.6 or higher version thanks
== This happened ==
Every time Firefox opened
== i upgrqde mozilla to 3.6.3 version and i check it with on another computers

Hi Deepak!
This seems to be a well-known and quite widespread problem with this extension, unfortunately - the net is full of complaints about this issue, not to mention 'horror stories' about how this (otherwise fairly innocent and well-certified but clearly highly commercial) extension has 'sneaked' its way into peoples installations.
I find it quite amazing that such an issue has existed for so long without the Browser Highlighter, TinyMCE and FCKeditor teams getting together and making a working fix - it should be rather easy to prevent with a tag or plugin check in editor code and/or a simple editor recognition routine in the extension.
If you want (/need) to use this extension, I can only point you to the Browser Highlighter homepage for support; in [http://thebrowserhighlighter.com/help.jsp The Browser Highlighter Help section] it is clearly documented - first section, last paragraph - along with a link to [http://thebrowserhighlighter.com/blacklist.jsp this problem report form] where it seems you can ask for help solving the problem.
However, given the (script-)name of the page, I suppose that reporting a problem on your own website (with all details) actually adds your site - or part of it - to a blacklist that TBH maintains to turn off TBH or at least problematic script injections when visiting sites registered in this list. So actually this might help you solve the problem quite easily, if they do what the page implies.
Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help more users with similar problems.

In FCPX 10.1.2 how do you edit in proxy mode...and after you are done editing in proxy mode, how do you switch back to original media? I had no problems with old version but complicated with newer version.

In old version of FCPX I could easily edit in proxy mode which i found to be a quicker way of editing...all i did was goto preferences and click on playback tab and change it from original media to proxy...and i could go right into editing, and when i was finished before i would export my project i would switch back to original media...then i would export my project. Now i'm having a hard time accomplishing this on the newer version fcpx 10.1.2. Somebody please help me....thanks in advance!!!

Click the triangle at the top right of the viewer and choose proxy or optimized/original as appropriate.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.

That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well.

How to test and develop the HTML/Backbone custom content viewer on IPad?

Hi
I have been tasked with developing and amending the HTML/Backbone custom content viewer as nicely detailed and explained by Derek Lu here:
https://www.adobe.com/devnet/digitalpublishingsuite/articles/html-default-library.html#
I can see that by removing the reference to libs/AdobeLibraryAPI.js in Index.html i am able to "test" on the desktop.

and that data is bought in via the fulfilment XML feed and the parse method is called on Librarycollection.
I have made the changes to hook up the viewer to bring in some folios that we are developing.
However, although this provides the ability to test and develop on the desktop in one form since we are using JS and Backbone, there are various checks within the provided code to see if ADOBE.isAPIAvailable.
If it is, then the behaviour is different than on the desktop, so once the viewer is packaged up and put on the IPad there is disparity between what you were able to check and test on the desktop version against what is shown on the IPad.
The question therefore is... is there a quick way to develop and test on the Ipad ... it doesnt seem like a viable option to develop blindly on the desktop and then package up the content viewer within Adobe DPS to check how those changes behave on the IPad?
To re-iterate the viewer is to make use of backbone / js example to provide greater functionality and options for customisation.
Thanks in anticipation.
Dave

Thankyou for taking the time to respond and for providing such detailed articles on adobe dps development, it is much appreciated.
I had completely missed that article and was struggling to find anything useful from googling!
Dave

Cannot view content text and elements in Dreamweaver

Hi,
I am not an expert in Dreamweaver, still learning. Would anyone tell me why when I open up the template in Dreamweaver's design view I cannot see the content text and other elements to edit or view? However, all those are still viewable in browsers. I can edit content only through code mode in Dreamweaver, not in design view. I am attaching the whole template for you to see.
I would greatly appreciate your feedbacks.
Ed

Found it in the last line of the code, it's a Joomla template.
The only real way to use this with dreamweaver is with one of the extensions for dreamweaver (not 100% required, but difficult without one), there are a number of extensions available (sorry, but none are free that I know of).
Try - http://www.justdreamweaver.com/dreamweaver-joomla-tools.html , or do a search for Joomla and dreamweaver extension.
PZ

Content Holder in Muse

I am attempting to use a content holder in Muse so an area of content can be shared across the Desktop and Mobile version.
Under Settings, I changed the setting so Muse Editing is off. That way i see the Content Holders show on the admin menu on left.
I created a content holder with some plain text, surrounded it with ice:editable class:
<div ice:editable="content">
<p> Test text in here </p>
</div>
I got the content holder module tag {module_contentholder,11111111} and turned the Muse Editing under settings back on.
I placed the content holder module tag {module_contentholder,11111111} on my Muse layout as an Insert HTML .... republished Muse site ... the page showed the <p> content but did not allow it to be editable unlike other Muse content.
Is there a way to make this work so I can share content without having to edit over both layouts?
thanks

I have followed these steps and still continue to get the following error message:
ERROR: You have deleted your web form. Please login to the Admin panel of your website and remove the previously submitted form from the web page you last visited. You will need to recreate this web form by going to Modules -> Webforms. After recreating simply insert this new web form into the web page and your web form should work properly.
When I published the BC form on a page and submitted it, I got the following message:
Credit Card Payment Failed
There was an error processing your credit card. Please correct this and try again.
ERROR: An error occurred while processing credit card
Non-seamless gateway with no shopping cart not supported. Error
Please go back and correct this.
Any suggestions?

7.0.0.1 exploded web app edit of html file deployed instantly

Seth,
For all static content in a webapp the web container accesses the content
when it is requested by a client. So if you change it at the source where
its deployed from, the changes will show up on the web client.
This is also true for servlet classes, however in that case the time
interval after which it looks for changes is controlled by a context-param
of the servlet:
<context-param>
<param-name>weblogic.servlet.reloadCheckSecs</param-name>
<param-value>-1</param-value>
</context-param>
this defines
* How often WebLogic checks whether a servlet has been
* modified, and if so reloads it. -1 is never reload, 0 is
* always reload. Default = 1.
"Seth Johnson" <[email protected]> wrote in message
news:[email protected]..
>
I am running WebLogic 7.0.0.1 in Production mode so autodeployment isdisabled.
I have deployed the application as external_stage. If I edit an htmlfile in
the source directory and then go to my browser and refresh, I see theupdate has
already been made.
Why is that?
I haven't told WebLogic to redeploy/activate the file. How often doesWebLogic
go to disk to determine the pages it has served have changed?
Does this only work for html files or are there other file types thatdon't require
"activation" before they are served?
Seth

IPad, Acrobat Reader, Content (text and pictures) no longer showing, just blank pages

Hi,
I have a user who successfully opened a .pdf attachment from outlook mail and then opened it in Acrobat Reader on the iPad and then edited it and moved it to a created folder.
Everything was working fine and the user highlighted text in the .pdf document too.
What then happened is when the user subsequently opened the file, the highlights were shown but not the content (text and pictures).
I checked they had the latest version via the apps store updates and noted there had recently been an update which had been applied.
I did check also in the diagnostics to see if there were any acrobat files, but there were none, I also turned on 'send diagnostics' in case this this will help in the future.
I rebooted the iPad by pressing and holding the power and home buttons until the apple logo appeared.
Checked again to see if I could view the .pdf content (it's around 8.5 MB file with 32 pages), still nothing showing apart from the yellow highlights that the user had done.
From within Acrobat Reader on the iPad I chose to open the file in iBooks to see if I could read it there. I could successfully open the file in iBooks and the front page thumbnail was showing (I did note that in Acrobat reader the thumbnail was white).
I found the email with attachment and opened it again in Acrobat Reader and it opens correctly, suggesting somehow the previous copy had become damaged? I have now saved this good copy over the top of the existing bad copy and all is OK except that the user has lost the highlights previously made.
Can you give me some idea of how this file has become broken in Acrobat Reader on the iPad and how I can avoid it happening again.
Many Thanks.

Thanks for replying.
This is the first time it has happened, the user has several folders containing files (on their iPad), (some .pdf's with additional highlights) these files are typically company agm board packs so contain pages of text and photo's too.
I put it down the fact that when I checked the app store for updates there had recently been an update and the user had not rebooted their iPad for some time, hence some of the underlying adobe reader files were perhaps between versions.
I don't know how you handle files when performing an update, do you close the app, flush files from memory and do a clean update?
I can confirm that the .pdf file had not been sent as an email attachment after having added the highlights.
Because the acrobat document contains so many pictures (32 pages and 8.5MB) when scrolling through it takes several seconds for some pages to appear, and others with text and pictures quite a while for the text to become sharp, I presume this is because the Acrobat Reader cannot open the 8.5MB file in one go and has to keep swapping it out of memory. Having reached the end if I scroll back to the beginning it takes 10's of seconds before the first page re-appears, otherwise it's just a white page. Interestingly in iBooks the pages appear almost immediately when viewing.
The iPad in question is model MD368B/A, 64GB, Software Version 7.1.1 (11D201) and has 28GB Memory available. Usage tells me Adobe Reader is taking 328MB and is version 11.3.1
I have just finally browsed back to recent documents, opened 2 or 3 other documents and then this one again (from recent) and it is now broken, just shows white pages (and on the thumbnail too) with my test highlights. so I can now apparently reproduce it.
Hope this all helps you re-produce
Regards,

Firefox starts fast in safe mode, but slow in normal mode with all extensions and add-ons turned off.

It's only the first screen/tab I open after firefox is completely shut off... it shows the borders of the screen for 5 seconds, before showing the content (empty page) and then I can start and everything after that is fine.
In safe mode it opens without delay, so my question is, what in the normal start-up could be causing this delay, I have reinstalled firefox, disabled all extensions and plugins.

Hello ellina, try disabling graphics hardware acceleration and check it again.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
'''In safe mode, also, hardware acceleration is disable''', see : http://kb.mozillazine.org/Safe_mode
Thank you.

Content server and Images

Hi... we've found some odd behaviour with content server and I'm wondering if anyone else has had similar experience.
Our installation is spread accross a number of servers, we have a front end portal/image server with Content Server installed on one of the servers behind the firewall.
When we create branding portlets (and content canvas portlets), it all works happily. The html template is created in the ptcs/publishedContent on the Content Server machine and images appear in the correct template folder on the Image Server machine and everything displays correctly on the portal page.
Problem is, for any other content portlets (eg: announcement), the images end up in the ptcs/publishedContent on the Content Server machine as well ... which isn't good as this location is not accessible from the browser - the published html gets rendered correctly but no images appear.
We don't want to manually transfer images from the Content Server to the Image Server and hack the generated ptcs html.... from what I can tell, all the properties set for the Image server are correct so we've hit a brick wall in terms of figuring out why it's behaving this way, our expectation was that the content portlets would operate in the same way as the branding portelts but this doesn;t seem to be the case.
thanks in advance

You should be able to edit the gateway space URL of the Content Server Published Content Web Service to include the published content location of where it is.
Alternately, you can set the published content targer and file transfer method for the server (or any other content server section) by right-clicking on the top-level node (or the individual folder) in the Content Server Explorer, and selecting "Publishing Target..." and setting the appropriate values in the resulting dialog box.

Mashups in Analysis Tab doesn't work in HTML mode

Hi,
We have few BW HTML mashups enabled on cloud. We tried to put all of them under Account details screen and they load properly in HTML mode.
But all these reports are not related to Accounts and hence we decided to put them under "ANALYSIS" workcenter and "PIPELINE SOURCING" view. Considering that these are also reports. Now in the adaptation mode, I am able to enable this mashup and in the silverlight mode I can see it enabled as shown in below screenshot.
But when I launch the HTML mode, I do not see this mashup at all. Is it a bug or a limitation of mashups on this screen? See HTML snapshot below.
If this is a limitation, then do we have a place holder on Cloud where we can enable all generic mashups(by generic I mean they are not dependent on any data on Cloud).
Thanks,
Siva.

Please don't post the same thing multiple times. I deleted your other posts.
Jeff

Sharepoint HTML Table of Contents help

Hello Everyone,
I am trying to create a table of contents on a sharepoint page, but have never used HTML before, so any assistance will be much appreciated.
I have inserted a web part into my sharepoint page that shows a list of subsites. Now, I would like to edit the HTML in the web part so that only items that begin with a certain letter or number are shown. How can I go about doing this? Are there any special
codes that I can use?

Hi Mark,
If you are developing the web part, I suggest you can filter the item you want to retrieve using CAML Query "contains" condition and Server Object Model.
Then you can bind the datasource to a grid in the web part.
Here are some detailed articles for your reference:
http://stackoverflow.com/questions/1870314/sharepoint-list-caml-query-using-contains
http://msdn.microsoft.com/en-us/library/office/ms467521(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/ms460897(v=office.14).aspx
Best Regards
Zhengyu Guo
TechNet Community Support

Edit in Html mode in content holder and everything dissapear

Similar Messages

Maybe you are looking for