Edit in Photoshop CS3

Normaly I can highlight multiple photos then Edit them in PS via the "Edit in Adobe Photoshop CS£" option, but now, when i highlight multiple photos it either only opens one in PH or none. I use the Edit Origonal button because with the other two options it seems to shrink the photo and therefore the border I add becomes to big with my useuall Action. Does anyone know why it is doing these things??
Plase need help on this.
Dan

Lee Jay, I want the 2nd to do the exact thing the first does. As best I can tell, I have them setup identical and the first computer is not doing creating/saving files with a -Edit.tif in the file name.
In any event, my bottom line is I want to choose "Edit in Photoshop CS3", have the file open in CS3 ready to edit, but not create a new file on my hard drive with a "-Edit" in the file name. I don't want anything automatically saved on my hard drive until I choose to save in CS3, and will likely save as a .jpg.
So how can I accomplish this?
Apologies for any confusion trying to explain this.

Similar Messages

  • Photoshop CS3 doesn't open or error occurs, when you Edit in Photoshop CS3 from Photoshop Lightroom 2

    Problem: When you try to Edit in Photoshop CS3 from Adobe Photoshop Lightroom 2, Photoshop CS3 doesn't open, or after Photoshop opens, you see the error message, "Photoshop could not be launched".
    This issue is currently being investigated. At present, there are two possible areas that might be causing this issue. Corrupted metadata or a corrupted catalog, or Photoshop CS3 has not been updated to 10.0.1, or the update did not apply correctly to the application.
    We are working for a permanent solution for this issue.
    Workaround: Please refer to this Adobe
    TechNote for further information.

    Quote
    "FIX IT OR SEND ME MY MONEY BACK NOW!!!!"
    This is a user to user forum, there is no one here to make a refund. Who are you SHOUTING at!!

  • Lightroom and using the Edit in Photoshop CS3 Options

    Today, I installed Lightroom v1.1 and Photoshop CS3 v10.0.1 I have an issue...Using Lightroom, I import a photo (JPG) into LR Library. Then, I right-click the photo and select the option to Edit In Photoshop CS3. This opens a window within Lightroom and there are three available options concerning What to Edit. Two Options reference Edit a Copy and One Option references Edit the Original. The two referencing Editing a Copy always says Lightroom cannot prepare the file for editing and that the file cannot be opened. If I select the last option to Edit the Original, that photo is brought into PS CS3 for Editing.
    This is also the situation with files TIFF and PSD.
    This is also the situation if I use a different Photo Editor other than PS CS3.
    I have read the user manual and if I read correctly, the Two Options which do not work should also work. Or does my thinking need correction?
    I would appreciate someone helping me with the understanding of this issue.
    Thanks.
    James

    Thanks to you both. I do appreciate your responses. Please keep them coming.
    I think Judith has a point.
    I believe I should be able to Import a JPG from somewhere (HD, Floppy Drive, CD Drive)into the LR Library and then call upon Photoshop CS3 to Edit that JPG. If I am not incorrect, when reading the Lightroom Documentation, I see where this action is supported.
    The action is: Right-Click a JPG (also TIF and PSD as well) in the LR Libary. From the menu presented, select Edit in the Adobe Photoshop CS3. A new Window appears from which to select either of two Edit a Copy Actions (with LR adjustments or without LR adjustments), I alway receive a Warning Window saying: Lightroom was unable to prepare the selected file at C:\Documents and Settings\My Name\My Documents\My Pictures\photo.JPG (or TIF or PSD) for editing. It will not be opened.
    If I select Edit the Original, the photo is brought into CS3 for editing. This selection is the only one which work. I wish to point out that the Copy File Options are grayed-out with the Edit Original Selection. And, the Copy File Options are NOT Grayed-out with Copy Options.
    In summary, if Copy File Options available, the JPG (or TIF or PSD) will not be prepared by Lighrooom for editing in CS3. My Copy File Options show TIFF and PSD pnly; no JPG. If I read correctly, I cannot Copy a JPG for editing into CS3. What I do not understand is if I have a TIFF or PSD in the Library, the Copy Option still fails to execute. The point John has made about RAW requires me to look into that aspect. I need to know more about that.
    Can anyone right-click a JPG in the LR Libary. Then select Edit in CS3. Then use either of the two Copy Functions Selections for the action of that JPG being prepared by LR and brought into CS3 for editing?
    This action will not work for me.
    I do plan to update my version soon.
    All replys and suggestions are welcomed.
    Regards,
    James

  • Why does Lightroom color not match when editing in Photoshop CS3

    I just started Using Lightroom 4, the only version of lightroom that I have used. Short version, saves me heaps of time. But I went to edit more in photoshop and noticed that the color is dramatically different. I have Photoshop CS3 (10.0.1)and the color space is ProPhoto to match lightroom. If I make edits in lightroom, say removing dust spots, it shows in the photoshop version. It seems that on the shadow side is where it really shows. My workflow would be to import as original RAW in lightroom 4 (canon 1d mark II) and go about editing. Right click to edit in Photoshop CS3, and this is where colors go crazy. Then if I save the file with no edits done in Photoshop and compare side by side in lightroom, they are completely different. What is causing the drastic difference?
    These are screenshots where in the left screenshot the original image is the dark image and the lighter is what it looks like when opened in Photoshop. The compare in lightroom on the right screenshot is what it looks like when I saved the file from Photoshop. So how does opening in Photoshop, then hitting save change the image? If i make the edit in lightroom then export the jpeg and open in photoshop, I get the appropriate color, exactly the same as my original lightroom raw. 
    My external editor settings in lightroom are tiff, prophoto colorspace.
    photoshop preferences are to preserve embedded profiles.

    Just to make sure we're talking about the same thing, when you "Edit in" Photoshop CS3, it should give a warning dialog that says the version of ACR in Photoshop isn't compability, with the option "Open anyway" (won't work well) or "Render in Lightroom" (which should be fine).  Or, if you've created your own "Edit in" preset, you should get the option "Edit a copy with Lightroom Adjustments". 
    So long as you've chosen "Render in Lightroom" or "Edit a copy with Lightroom Adjustments" (depending on how you've edit up "Edit in...") then colour should be OK. 
    Colour options in PS should be something like:
    Check all the "Ask when..." options, just to make sure you get warned of mis-matches.  And I suggest the RGB policy should be "preserve...". 
    And the final thing: to be sure of no colour mis-match, you need a calibrated/profiled monitor (with a hardware tool like Spyder, ColorMunki, Eye-One etc).  When there isn't a monitor profile containing a colour space (which needs a hardware tool, generally) then different programs can make different assumptions and display the same image differently. 

  • LR 2.1RC - Still No Dialog Box w/ "Edit in Photoshop CS3" Option

    I downloaded Lightroom 2.1RC today and installed it with reserved enthusiasm, hoping that I could finally get the options popup box to display when I choose "Edit in Photoshop CS3" after right clicking a photo. I still have the same problem I did w/ 2.0: after right clicking a photo as mentioned above, specifically a RAW file, and choosing "Edit in Photoshop CS3" from the popup box that appears, instead of getting the options list where you can choose whether to open a copy of the file with lightroom adjustments, etc. it just exports the raw file directly to photoshop without converting it to my chosen format of psd. I've also tried setting the conversion file format to tiff and this didn't work either. I get an image on the photoshop desktop that has the .cr2 file extension appended to it. Apparently no conversion was done by lightroom. I'm running the following:
    Pentium 4 3.0 GHz
    WinXP SP2
    4 GB RAM

    Thanks for your quick reply, Jeff. If I understand your explanation, what I'm experiencing sounds like expected normal behavior. However, that doesn't explain why the options box comes back when I choose Photoshop as an additional editor and go that route.
    I remember getting the options dialogue box when I chose "edit in Photoshop CS3" in Lightroom 1.4.1. Have they changed the process used to send an image to Photoshop from Lightroom in v2.0?
    I did happen to pull up a post from another user who was having the same issues I describe here and this is the response he got:
    "KED, this is fixed with PSCS4, due out soon. CS4 was the first to have such integration and to get it the provided 10.0.1, So it is an evolving dance between the two. This is a CS thing, not a LR one. PSCS, needs the right hooks for the pass off to happen, AFAIK, and the come more completely with CS4!
    Don"
    Sounds like the issue may lie on Photoshop's side of things?

  • Edit in Photoshop CS3 Issue

    I have one computer where if I do "edit in Photoshop CS3," the file opens in Photoshop and the file name shows as a <image#>.CR2.  I can then save it as a jpg or whatever, and the added file shows up in my Lightroom catalog.  Perfect!!<br /><br />On my other computer, when I go through the same steps the file opens in Photoshop as <image#>-Edit.Tif.  And not only does it open this way (-Edit.Tif), but it automatically saves this image on the hard drive and adds it to the catalog regardless of whether I proceed to save in Photoshop or not.  This is driving me crazy, because it is saving multiple files and eating up hard drive space for no good reason.<br /><br />Can anyone help?  I've checked preferences, etc. 100 times but must be missing something.<br /><br />My "Edit in CS3" preferences are TIFF, sRGB, 8 bits, 250 resolution.  The "Edit Externally File Naming:" at the bottom of the Preferences page has "Custom Name" beside Template and nothing in the Custom Text line.<br /><br />Help!<br /><br />Thanks - Mark

    Lee Jay, I want the 2nd to do the exact thing the first does. As best I can tell, I have them setup identical and the first computer is not doing creating/saving files with a -Edit.tif in the file name.
    In any event, my bottom line is I want to choose "Edit in Photoshop CS3", have the file open in CS3 ready to edit, but not create a new file on my hard drive with a "-Edit" in the file name. I don't want anything automatically saved on my hard drive until I choose to save in CS3, and will likely save as a .jpg.
    So how can I accomplish this?
    Apologies for any confusion trying to explain this.

  • Lightroom - edit in Photoshop CS3 problem

    Hi All,
    I'm running Lightroom 2 on a MacPro. When I first installed it all was fine with 'edit in' function, which I had configured to PS CS3 my primary external editor. Later, as a test, I added an additional editor - Photomatix - just as a test more than anything else. I subsequently noticed that when I then tried to edit in CS3, still set as my primary editor, I was no longer shown the 'edit options' window i.e. 'Edit a copy with LR adjustments', 'edit a copy', edit original'. Instead, the original file would open directly in PS with none of my LR adjustments! I have now had to set CS3 also as my additional editor to get around this - when set as additional it shows the prompt.
    Does anyone have any ideas about this behavior and how to reset LR so that it will prompt me again when I try to edit in my primary editor? I'm guessing this must be a bug with the current version. Any help would be greatly appreciated. Thx.
    Dave

    >Dabow:They are all RAW files that I'm sending. The fact that I also have PS set as my secondary editor and from there it prompts me with the edit options window proves that it's a fault with the primary editor slot.
    The primary editor slot is designed to behave differently than the secondary editor slot. From everything you have said it appears to be acting exactly as designed.
    The primary editor slot, which is always photoshop.exe, is designed to send RAW files directly to Photoshop after applying the develop adjustments made in LR2x. Thomas Knoll said it best in another thread discussing this exact same issue:
    Thomas Knoll, "LR 2.1RC - Still No Dialog Box w/ "Edit in Photoshop CS3" Option" #3, 26 Sep 2008 7:19 am
    When you use the secondary editor slot, even if you select Photoshop.exe, those special hooks built for use with Photoshop.exe will not be used and this is by design. By placing Photoshop.exe into the secondary editor then you guarantee the old, i.e. LR1x, method of accessing an editor is used. That 'old' method activates the options dialog.
    To sum it up:
    *RAW via Primary Editor slot (always Photoshop.exe) = no options dialog.
    *RAW via Secondary Editor slot (even if it's Photoshop.exe) = options dialog.
    *non-RAW via any editor slot = options box

  • Another "Edit In Photoshop CS3" Problem?

    I've scanned other threads and although I found similar entries, I couldn't find an answer to the following:
    When (in LR2.0 and LR2.1) I "Edit in Adobe Photoshop CS3" (by right clicking), the selected image correctly opens up in CS3. I can then edit the image but when I close it down and save it does not get re-imported into LR. Instead the edited image is saved in the same folder as the original and I have to manually reimport into LR.
    Obviously LR1.x didn't have this problem as it created the duplicate prior to CS3 opening. However, I don't know if this problem I'm seeing is "as designed" in LR2 or whether it is a known bug, or if there is a setting I need to change in my installation.
    If my PC/config has any bearing, I'm running Vista-64, AMD Phenom, 8GB RAM.
    Thanks for any help!

    Hi Nick,
    I've tried all the things suggested on http://www.adobe.com/go/kb404907. I actually went further than all this - I wiped the system drive clean and did a clean install of vista, lightroom and photoshop!
    However, I think you have probably worked out what is happening. I too am on a multi-drive setup with my catalog/files on a separate drive to my system drive. And exactly the same thing appears to be happening to me. The edited image file (on exit from PShop) is being saved on the drive the original image is stored (same directory as you would expect), however I *think* lightroom is actually creating "dummy" (blank) files on the system drive (where lightroom is installed).
    I say *think* because I can't check it now because my catalogue has just become corrupted. Luckily before it crashed I noticed that there were files shown on my C drive and I know for a fact I have not put any there. Unfortunately LRoom now thinks my main catalog is open by another application, even after a couple of reboots, so I can no longer get back in?!.
    I'll try and sort the catalog out tomorrow (or recreate a new one) and confirm your suspicion. I'm sure you're right - Lroom is getting confused and assumes the edited files are on the same drive as it is installed!! ...

  • Editing with Photoshop CS3 from Photoshop Elements 8

    I posted this in the PSE forum but didn't get any hits. Hopefulyy I'll be luckier here.
    I have just purchased Photoshop Elements 8. I do all my editing usually with Photoshop CS3. I use Elements mainly for the organizer.
    When I choose Edit with Photoshop from the organizer, it launches the application but the photo does not open in Photoshop. Nevertheless, there is a banner accross the photo in Elements that says "Edit in Progress". If I close Potoshop CS3, the banner stays there. I have to close Elements to get rid of it. If I choose "Open with Photoshop Elements" it works fine.
    That used to work fine with my previous version of Elements 6.0. Everything works fine in CS3. Any suggestion on what I might be doing wrong?
    I'm running Photoshop Elements and CS3 on Windows Vista 64 bit.
    Thanks.

    I have too much invested in Elements Organizer. 1000's of photos over a period of 5 years - tagged, version sets, stacked, albums, collections, ... I don't believe Bridge can do all of that.
    I replicated the environment on a different PC with XP instead of Vista. Same problem. There seems to be a bug between Elements 8 and CS3. I don't have CS4 to test it with.
    Come guys, with all the people in this forum, someone must have hit the problem or has an idea of what's going on. I logged a case with Adobe support but I doubt this will be a quick resolution.
    Thanks.

  • Editing with Photoshop CS3

    I have just purchased PSE 8.. I do all my editing usually with Photoshop CS3. I use PSE mainly for the organizer. When I choose Edit with Photoshop, it launches the application but the photo does not open in Photoshop. Nevertheless, there is a banner accross the photo in PSE that says "Edit in Progress". If I close Potoshop, the banner stays there. I have to close PSE to get rid of it. If I choose "Open with Photoshop Elements" it works fine.
    That used to work fine with my previous version of PSE 6.0. Any suggestion on what I might be doing wrong?
    Thanks.

    Hi Majouz,
    Sorry I was out of town for a week so couldn't respond. I use CS3 on a Windows XP machine (2GHz Intel, 1 GB RAM).
    Can you please see if the photograph filename or the folder path contains any special characters like aprostrophe, ampersand and all? If yes, rename your files / folders and try again.
    Let me know if this works for you.
    ~thandamunda

  • Photoshop CS3 editing does not work in LR 2.0

    Just upgraded to LR 2.0 and did the data base conversion everything works just fine. Btw, I did keep the LR 1.4 installed because I wanted to make sure I have a fallback in case I have a problem with LR 2.0.
    I do however have a problem. I cannot edit images in Photoshop CS3. If I select any of the Edit in Photoshop CS3 menu options, CS3 fires up but no image is displayed in Photoshop. I did upgrade CS3 with the latest upgrades available from Adobe. I have no problems editing in CS3 under LR 1.4.
    Any suggestion what may cause this?

    Mea culpa - I was eyeballing the forum but the word "export" did not ring a bell for the problem I am facing. Thanks for pointing me to the thread covering the problem.

  • Edit with Photoshop - Output to PS CS3 always Adobe RGB???

    I'm having trouble understanding why every photo I export from Aperture 2.1 to edit in Photoshop CS3 is exported to Photoshop in the Adobe RGB color space.
    My Nikon D3 is setup to record as sRGB, which I understand does not matter (e.g. Aperture sees only RAW data, and setting the camera to record aRGB vs sRGB RAW (NEF) makes no difference to Aperture.
    Is there any way to set A2 to only export to Photoshop in the sRGB colorspace?
    I have tried setting it to export files in PSD and PSD 16 bit mode, but not TIFF.
    Any hints on this? It's really confounding.

    Barry Fisher wrote:
    Not sure that is correct. If your monitor is properly set, you will see a slight difference between different color profiles.
    Which is why I made a point of typing 'pretty much' identical and not 'totally' identical...
    Sarge_ wrote:
    Yes, but PS only seems to manage one screen, the one that is being used to host the menu bar at the top of the screen.
    In my case, that means that the photo doesn't look the same across the two screens, as it does in aperture. (and even that isn't perfect, but I use an HP 30" and a Wacom 20" Cintiq so there's only so much my eyeOne can seem to manage.)
    So your actual problem is with PS/eyeOne, and not much to do with Aperture? I know I'm putting words in your mouth, but it sounds like you're asking for options in Aperture because of bugs in other apps, not for the sake of the feature itself. That said, enough people ask for the ability to set the working space for external editors that I think it should be added anyway.
    Have you filled in a feature request on the feedback page?
    Ian

  • Edit in Photoshop opens images upside down

    I'm using Lightroom 2.0 and PhotoShop CS3.
    I'm on an Intel Mac running Leopard, with Lightroom 2.0 and Photoshop 10.0.1
    I have a problem with opening images in Photoshop from Lightroom where those images were taken on a particular camera - a Fuji FinePix 9500.
    Choosing Edit in Photoshop CS3 from the Lightroom Library module opens these images upside down.
    Choosing Open as smart object in Photoshop also opens these images upside down.
    The images are DNG files but trying the same action with the original RAW files displays the same problem.
    Opening the same files directly into Photoshop CS3 displays the images correctly.
    Opening the same files from Bridge CS3 displays the images correctly
    Opening the same files from Lightroom version 1 displayed the images correctly.
    Opening files from an older Fuji FinePix 4900 open correctly in Photoshop.
    In Lightroom itself, the thumbnails, loupe views and slideshow images are all oriented correctly.
    Can anyone shed any light on this?
    David Wood

    Probably the same bug that opens my D70 images rotated 90 degrees. No problems with my other cameras, only the D70. Adobe know about it, but it would be worth logging your bug on their report form:-
    http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Bob Frost.

  • Camera raw and Photoshop CS3 from Lightroom

    (2.5) If I open a raw image from Windows Explorer or Bridge (which I don't use much), Camera Raw 4.6 opens. It doesn't open if I Edit In Photoshop CS3 from Lightroom, but says "This version of Lightroom may require the Photoshop Camera Raw plug-in version 5.5 for full compatibility. Camera Raw version 4.6 is the latest version available for Photoshop CS3".
    There are two choices: Render using Lightroom and Open Anyway. If I say the former, it doesn't use the file name, but does something like -2.tif.
    I'm not sure what these two choices actually do.
    Secondly, if things were working properly, would Lightroom actually open the Camera Raw window? If so, is there anything I can do short of upgrading PS to CS4?
    Thanks.

    Just a little history of the profiles being displayed for your camera model. The camera calibration tab only displays the profiles that are specific to your camera and model. The earler profiles were named after the version of ACR that was in use when they were created.
    So.
    ACR 4.2 the first profile created for your camera model when support was introduced.
    ACR 4.4, Adobe created/ updated new profiles for most of the supported camera models with this release of ACR.
    Adobe Standard Beta, updated profile when the Beta of ACR 5.0 and LR 2.0 were introduced.
    Adobe Standard, Updated profile for the final release of ACR 5.0 and LR 2.0. This then is the latest profile created for your camera model. I think it should be the closest to your camera standard.
    Adobe did not create any other camera matching profiles Vivid, Neutral etc other than for the more popular Nikon and Canon models.  I have an Olympus so I am in the same boat.

  • LR2 does not load images in Photoshop CS3

    When I select an image in LR2,than choose "Edit in Photoshop CS3",Photoshop does load,but after that an "Open" dialog box appears,instead of the selected image.Same with "Open as a Smart Object".
    Also in LR2,Develope Modul,Camera Profiles I don't see "ACR 4.5",although I did this update.
    What I tried:reinstall LR2.Did not work.Reinstall PSCS3 with all updates.
    Didn't work either.
    My OS system is a Windows XP Professional Edition,SP3.
    Please help with a solution for this problem.
    Thanks,
    Peter

    Dear Paul,
    Thank you,but it doesn't really work.
    I mean,if you saw Scott Kelby's tutorial about Photoshop Integration at http://www.photoshopuser.com/lightroom2/,he opened a raw file as a smart object from LR2 in Photoshop,without making any copy (tiff) of the image.When I try the same,an "Open As" dialog box pops up in Photoshop,wich means I have to search through the folders to "tell" Photoshop wich image I want to open as a smart object.I tried it with tiff and jpeg,but same thing happenned.
    The "workaround" way you suggested creates a copy,plus I have to convert the image into a smart object,instead of having LR2 doing it.
    So the "Open as a smart object" and the "Edit in Photoshop CS3" commands in LR2 are just pointless this way.
    Thanks anyway,
    Peter

Maybe you are looking for

  • Ram compatibility for White Macbook 2006

    Want to upgrade RAM and note Apple specs say RAM Type: PC2-5300 SO-DIMM 200 pin Someone local to me is selling the following 2007 Two x 1 GB PC2-5300 S)-CIMM/CL5 laptop ram # Memory Type: DDR2 667 SDRAM (MicroDIMM) # Capacity: 1GB # Bus Speed: 667MHz

  • Budget carry forward problem

    Guys, When i try to carry forward my budget for internal orders in KOCO i am getting this error. I am trying to carry forward budget of 2008. We are testing are year end steps. How does the system determine which fiscal year is closed? i have closed

  • Outbound interfaces from oracle general ledger

    Hi, I have a requirement of exporting : • Stores transactions • Invoice transactions • Payment transactions • Bank reconciliation transactions • Goods Received Not invoiced (GRNI) Accrual transactions Please let me know if there are any stadard inter

  • MRP: how to avoid Purchase orders/ Production orders generation

    Hello, I would like to know how can I avoid the generation of purchase orders / production orders for MRP execution. I am interested in knowing which are going to be my future needs for a material running the MRP, but I am not interested in generatin

  • Windows Server 2008 x64: Error on Shadow Copies tab

    Pulling up the Shadow Copies tab on any of my drives gives the following error: Initialization failed.  Error 0x80040154: Class not registered. Any ideas?  Per the event log, the VSS service is starting and stopping successfully with no errors.  No e