Edit-in-place isn't working

Hi
I've a problem with the edit-in-place config. I have mapped the device with "afp://..." and put the path into the field "Macintosh edit-in-place URI":
file://localhost/Volumes/Data/FCS/...
The file path shouldn't be the problem in order of the finding items when I test it in Safari.
But I still need to cache the asset when I drag'n drop the file into a final cut project. And I don't get a grey dot in the list view in front of the asset.
Any ideas to fix the problem?
thanks!

I am having similar symptoms using Lightroom 1.2 and CS2. I just updated to Lightroom 1.2 this week.
The first time I select edit in CS2 Photoshop launches fine and the image is transferred. If I attempt to edit a second image Lightroom hangs indefinitely on "Preparing the file for edit". Lightroom is dead at this point. Any attempted operation, including canceling the edit, just adds to the hanging stack. The only out I have found so far is to exit Lightroom, tell it to abandon all uncompleted tasks, and then restart it. At that point it will again work correctly to edit one image. It is the editing that causes the hanging, other functions performed after an edit do not (e.g. working in the develop module on a second image).
Lightroom 1.1 did not have this problem. The images I was working on were imported into Lightroom after I updated to 1.2. I am working under XP Pro and off of an internal (vs external) hard drive.

Similar Messages

Edit in place documents not working in beehive team collaboration w/IE

I know the Chrome,Firefox browsers don't have an edit-in-place, but IE is supposed to map the network drive via webdav and uses this as a back channel to save the changes on saving the document.
This was working very well on my old laptop using a 32 bit windows, and an older IE platform. probably 95% of the time.
Since my upgrade to Windows 7, 64-bit, IE 8.0.7601, it works about 20% of the time. Very unreliable. Does anyone know what can be done to get this to work more consistently?
Thanks.

Thanks A. Richards.
After much testing, I realized that on the FCSr machine that it indeed had edit-in-place status because of the storage directly attached to it. BUT the other client computers did not.
So basically, since we don't have the $1000 a seat for XSAN and we are only cutting DV and DVCPRO HD...
We could configure our Mac Pro Server to be an AFP share over the network; it's plenty fast over Ethernet since it's aggregated over 6 gigabit ports to a switch and has PCIe RAID storage attached. We could give this edit-in-place status IF...
We used another machine (server class) to install FCSr on.
This would work right?

"Edit with Photoshop" isn't working any more

Guys, when I right-click an image and choose "Edit with Photoshop CS3" (edit Lightroom copy), it will create a copy but will not launch Photoshop. This creates a problem because other than exporting the file there is now no way of editing outside Lightroom.
How do I get this functionallity back?
(I think it started doing this when I applied the 1.1 patch...)
OS is WinXP.

I am having similar symptoms using Lightroom 1.2 and CS2. I just updated to Lightroom 1.2 this week.
The first time I select edit in CS2 Photoshop launches fine and the image is transferred. If I attempt to edit a second image Lightroom hangs indefinitely on "Preparing the file for edit". Lightroom is dead at this point. Any attempted operation, including canceling the edit, just adds to the hanging stack. The only out I have found so far is to exit Lightroom, tell it to abandon all uncompleted tasks, and then restart it. At that point it will again work correctly to edit one image. It is the editing that causes the hanging, other functions performed after an edit do not (e.g. working in the develop module on a second image).
Lightroom 1.1 did not have this problem. The images I was working on were imported into Lightroom after I updated to 1.2. I am working under XP Pro and off of an internal (vs external) hard drive.

HELP! edit capture time isn't working!

I'm trying to adjust a bunch of image capture times from my second shooter to match my image capture time. I have done this many times, and now it seems it won't work. I can only do one at a time now. Any help would be greatly appreciated!

Thats how I'm doing it. I select all the images i need changed. Make sure I'm in Library mode. Then click metadata up above then edit capture time. It use to allow me to change all. Now it only lets me change one. So frustrated! I can't seem to find anything online as to why this is. {unless I am doing it all wrong somehow} John R. Ellis

Edit-In-Place with CMSDK 9.0.4.2.X ?

Hi all,
Oracle Content Services and Oracle Content DB ship with a special Active-X-Component "Edit-in-Place" which allows the user to edit documents directly in an Oracle-Drive-connected DMS repository. This feature is used i.e. in Oracle ADF to build web applications in which the user can edit documents in MS Word et al. simply by clicking the "edit-in-place" link.
Unfortunately, we run Oracle CMSDK 9.0.4.2.X, so we have doubts about using the "Edit-in-Place" control in our environment.
Does anybody know
- whether it would be possible to include the Active-X-control "Edit-in-place" in our Oracle ADF applications running on AS 10.1.2.0.2
- whether the "Edit-in-place" control would work with the Oracle CMSDK 9.0.4.2.x
- what system requirements are generally needed for the "Edit-in-Place" control
- whether this use would be certified and licensed appropriately
- if the control can not be used: Is there any workaround or best practise on how to edit documents in the CMSDK repository directly from web applications?
Many thanks in advance.
Regards,
Thomas

Hi Thomas,
we implemented a cross-browser edit-in-place solution for CM SDK 9.0.4.x. If you're interested check out inxire.com.
Regards,
Toni

Edit in Place Import issuesiss

I am configuring a system at a new client. We have a SAN, so Final Cut Server is configured to use "Edit-in-place," which is working fine. The only issue is we want to be able to put new media on the SAN, and then manually upload it to Final Cut Server, so we can annotate the metadata before the assets get cataloged. Therefore, the added files scan is disabled. Only problem is, when we try to upload assets, the "Title" field does not auto populate the same way it would if the media wasn't already on the SAN. This makes it very cumbersome to upload large groups of files since each file's name has to be entered by hand. Has anyone seen this and if so, is there a work-around or is it just a bug?

I've seen this too and it is annoying as anything. The only work around I have seen is to do multiple assets at one time. I hope that works!

Edit-in-place NOT working...

I've recently installed FCS at our small shop. I've read the Geller book, followed the Admin manual, and pretty much have gotten it to work.
However, I can't get "edit in place" to work. It did work when I initially installed the system and tested it. And now, after a complete re-install, it doesn't work.
I am using two local RAIDs. Each have a media directory that I set up as a device. For example:
One device is called "Mojo Project Media 02"
In the Device Pane (on the Admin / Client Java Interface) the Local Directory reads:
"/Volumes/RAID_02/Mojo Project Media 02"
So the Mac edit-in-place URI reads:
"file://localhost/Volumes/RAID_02/Mojo Project Media 02"
I can't get the edit in place URI to not ad "localhost" but I don't think this should matter.
Whenever I try to move media into a Browser Window from FCS, it tells me I must copy it to my local cache first. This didn't happen when I first installed/configured the system.
Can you not set up edit-in-place for a local directory (ie. a volume locally attached to the server with FCS installed)?
I know it worked before. Is there something I am missing?

Thanks A. Richards.
After much testing, I realized that on the FCSr machine that it indeed had edit-in-place status because of the storage directly attached to it. BUT the other client computers did not.
So basically, since we don't have the $1000 a seat for XSAN and we are only cutting DV and DVCPRO HD...
We could configure our Mac Pro Server to be an AFP share over the network; it's plenty fast over Ethernet since it's aggregated over 6 gigabit ports to a switch and has PCIe RAID storage attached. We could give this edit-in-place status IF...
We used another machine (server class) to install FCSr on.
This would work right?

IMovie: When i put in music for the background of my clips, my clips go quieter, but then when i take the music out it goes loud. I tried to edit the music to try and make it go quiet like background music would, but it isn't working?

In iMovie on my new MacBook Pro. I'm editing a video of mine (As i make videos for YouTube), i put in the clips, then i put in background music. But when the music is there, the clips go really quiet. I'm trying to change that but it isn't working, i've edited the clips to make any other sound go quiet on the audio bar, but that hasn't worked either. I've tried to edit the music to go quiet on the audio bar, but that didn't work. Nothing is working!! It's like the music is taking over! You can barely hear the sound of the clips talking. Then after the background music has finished, if there is any clips left over, the clips go really loud!
It's geting me really annoyed, i've tried everything.
Can anybody help? Even suggestions would work!

I'd be posting in the iMovie forum for iMovie help.

The Edit Window isn't working.

Hi Guys, The Edit Window isn't working. It immediately crashes the Programm, when i try to open the Single Track View. Any Ideas?

Uninstall and reinstall the software. If it still does this, contact Adobe's chat line; that's specifically what they are there to fix, amongst other things.

HT1657 i am trying to watch a movie using my appve TV, but i am asked to verify 'payment' info on itunes store. i have updated everything using the 'edit' button, it still isn't working and i am frustrated, 6465107522

i am trying to watch a movie using my appve TV, but i am asked to verify 'payment' info on itunes store. i have updated everything using the 'edit' button, it still isn't working and i am frustrated, 6465107522

perhaps this will help?
h t t p://w w w.aone-soft.com/mobile_3gp_video_converter.htm
or do a google search on "mobile_3gp_video_converter"
Message Edited by JSanders on 11-18-2008 09:43 AM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!

I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
It started after the major update to iOS 7.
I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
My iPad 4 is not affected with the problem and works as it should.

To delete, tap "Edit" (tap to enlarge image)

I changed the password to my ipod but it isn't working and I don't want to restore it. Is there a way of getting rid of the pass word or un-disabling my device?????

I changed the password to my ipod but it isn't working and I don't want to restore it. Is there a way of getting rid of the pass word or un-disabling my device?????

Connect the iOS device to your computer and try to make a backup.
iOS: How to back up
Then restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Hi. I have a ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.Also my home button isn't working.

Hi. I have an ipod touch 4th generation, it's in perfectly good condition no cracks or anything. The issue is my ipod is locked and i'm not able to type in my passcode because the numeric keypad isn't working properly.For ex. when i hit 8 (which is the second number in my passcode) the number 5 type in. Also my home button isn't working. Hope that was specfic enough.. thanks!!

Place the iOS device in recovery mode with one of thes programs and then restore via iTunes
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:

My speaker isn't working. How do I fix it?

My iPod speaker isn't working and only happens to work when I use my headphones. I would like to fix my speaker, how can I fix this problem??

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

"Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".

Hi, i am trying to setup back to my mac at home but I get the error "Back to my Mac isn't working properly because your DNS server isn't responding. Contact your ISP for an alternate DNS server address, and enter it in Network Preferences".
There is no documentation on how to solve this anywhere.
I have an Arris router set to bridged mode which is connected to a 5th generation airport extreme. I have tried using the google dns servers instead of the one assigned by the cable company in the AE but I still get the same error.
Any help would be much appreciated
Kenneth

New to BTMM, I got stung today with the silly DNS problem message. Solution:
1) Flush DNS cache with:
dscacheutil -flushcache;sudo killall -HUP mDNSResponder
2)System preferences > iCloud > untick BTMM then tick it again. The warning should have disappeared.
Edit #1
Apologies for the noise. The warning has come back
Edit #2
Just found out that BTMM is not compatible with double NAT. That's not helpful.
http://support.apple.com/kb/TS1208

Edit-in-place isn't working

Similar Messages

Maybe you are looking for