Edit-in-place NOT working...

I've recently installed FCS at our small shop. I've read the Geller book, followed the Admin manual, and pretty much have gotten it to work.
However, I can't get "edit in place" to work. It did work when I initially installed the system and tested it. And now, after a complete re-install, it doesn't work.
I am using two local RAIDs. Each have a media directory that I set up as a device. For example:
One device is called "Mojo Project Media 02"
In the Device Pane (on the Admin / Client Java Interface) the Local Directory reads:
"/Volumes/RAID_02/Mojo Project Media 02"
So the Mac edit-in-place URI reads:
"file://localhost/Volumes/RAID_02/Mojo Project Media 02"
I can't get the edit in place URI to not ad "localhost" but I don't think this should matter.
Whenever I try to move media into a Browser Window from FCS, it tells me I must copy it to my local cache first. This didn't happen when I first installed/configured the system.
Can you not set up edit-in-place for a local directory (ie. a volume locally attached to the server with FCS installed)?
I know it worked before. Is there something I am missing?

Thanks A. Richards.
After much testing, I realized that on the FCSr machine that it indeed had edit-in-place status because of the storage directly attached to it. BUT the other client computers did not.
So basically, since we don't have the $1000 a seat for XSAN and we are only cutting DV and DVCPRO HD...
We could configure our Mac Pro Server to be an AFP share over the network; it's plenty fast over Ethernet since it's aggregated over 6 gigabit ports to a switch and has PCIe RAID storage attached. We could give this edit-in-place status IF...
We used another machine (server class) to install FCSr on.
This would work right?

Similar Messages

The "FIND" feature in the Edit menu does not work. I can't find anything on a webpage

The "FIND" feature in the Edit menu does not work. I cannot search a page. If I am looking for the word "Doctor" and I know it is on the page. All I get after typing the first letter is that the typing box turns red.
This is not fun.

Make sure that <b>[] "Match case"</b> on the Find bar (Ctrl+F) doesn't have a check-mark.

FCP 7.0.3 ripple edit in timeline not working

FCP 7.0.3, AVCHD/proRes 422 LT, ripple edit in timeline not working. Using the ripple tool, I click on the edit point, drag the cursor to the clip and direction I want to trim but it doesn't work. pop-up says collision on V-1. Same thing when I double-click the clip to player and try to move the edit point on the scrub bar. This was functional in prior sessions. What's happening? Thx in advance.

I'm only using one (V1) track. Prior to this problem I was unable to insert edit. That problem mysteriously vanished after an unsuccessful phone support session w/ Apple failed to solve. Also when I try to insert w/transition (default cross-dissolve) the transition is applied to the opposite edit point,ie: out point of insert clip has transition instead of in point where it was applied. When I try to add transition to edit point (CMD-T) it doesn't work.
I'm slowly working around the ripple edit malfunction by using the razor tool and ripple delete (shift-delete) to trim in the timeline.

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac? No

In content editing repeating regions not working Safari 6.05 and Google Chrome v30.0.1599.66 mac?
Marquees not showing, works perfectly fine on PC IE 9.
Can edit text put cannot duplicate regions?
Can anyone advise? Not good if the client worjs on Mac.

Marquees the HTML tag? It's the most hated HTML tag out there, most browsers removed it because it was such a pain to see in 1996 scrolling images and scrolling everything

Places not working after photo has been edited...

Hello All
As the title states after I edit a photo in Iphoto (on the ipad, in either Photos or Adobe Express) the edited photo no longer shows in places.... Is this just the way it is? Does the geotag go away after editing? Should I be saving the edited photo differently? I know if I leave the original it will still show in places but I would prefer not to have both versions on my Ipad just the edited version, but I do like the Places tab/option....
Any help would be greatly appreciated.
Thanks :-)

If you have the serial number for the installation and it is version 8 or higher you should be able to download it thru one of the pages linked below. If you registered the software, you should be able to find the serial number information for it thru your Adobe account.
If the above holds, you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
Photoshop/Premiere Elements 8:
http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Photoshop/Premiere Elements 9:
http://prodesigntools.com/photoshop-elements-9-premiere-elements-9-direct-download-links.h tml
Photoshop/Premiere Elements 10:
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Photoshop/Premiere Elements 11:
http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

Logic 9 bounce in place not working as it should

Trying to get the bounce in place to work on an external instrument track linked to a hardware synth.
From the Logic 9 manual " The bounce process is usually performed offline, b*ut Logic Pro automatically switches to real-time bouncing whenever necessary. (When there is external gear involved, the External Instrument or I/O plug-in is used.)*"
Not with me it's not.... the SPL whizzes through as if doing an offline bounce, without detecting its an external ins track and doing a real time bounce as it should...
I've had this confirmed by a couple others so hoping this gets a fix and works how it should be as stated in the manual!
Message was edited by: jauqq

Hi, I've been experimenting further with regular bounce. Bouncing a kick drum from Battery results with an offset of 3 samples. Not a lot, I know, but it's not right. Bouncing Region In Place results in 205 samples offset, so something is broken somewhere.
Any thoughts I 'd love to hear them!
Cheers
Steve

Facebook Check In/places not working?

I have the latest 9320 3g bb, i don't have the BB Addon, and im using wifi, when i try to check in it just says aquiring location and my location is never found. In my options GPS services are all on and in my fb settings places is also on but it's still not working? do i need to edit a privacy setting on fb? if so how and which one
here are all the screens you need:
http://imgur.com/ABOky,MuG7t,7jxBS,COz9l,VK86w,K4661

Hi ezeekaY ,
Welcome to the BlackBerry Support Community.
By the Add on, are you referring to a data plan from your wireless service provider? A data plan is required to connect your BlackBerry® Curve™ 9320 smartphone with the BlackBerry® Internet Service to use GPS services and Places for Facebook® for BlackBerry® smartphones.
Thanks.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Places not working correctly

I can't seem to get Places to work correctly. Here is what I do and what happens:
1) I shoot picts with a point and shoot and a handheld GPS. Dates and times are in synch. Time zone double-checked.
2) Import photos into Aperture.
3) Plug Garmin 60csx into Mac via USB. Choose track from today to import.
4) Nothing happens. Repeat #3 a total of three times. On the third time (I've done this several times and it is always on the third time) the track will appear in blue on the map. (Side note: moving the cursor along the track and looking at times--they seem correct. Double checking the time stamp on the images--they seem correct, too.)
5) I select the images and drag to the track line. Before I let go a little pop-up box comes up. It says "x hours" and below " -/+ y minutes". As I moved my mouse over the line the numbers of x and y change in irregular ways--or perhaps the fact that my track there and back is overlaid on top of itself is confusing me in some way.
6) I let go of the mouse. Dialog pops up asking if I want to assign photos based on time stamp. I click "Assign Location."
7) Pins then appear for each photo near where I had the cursor. Repeating this process, the pins always appear near the cursor, no matter where on the track I put the cursor, with the same images. The pins never appears at the correct location.
Missing something obvious, no doubt!
Thanks,
--Darin

Bug is fixed in Kepler https://bugs.eclipse.org/bugs/show_bug.cgi?id=393513

Edit in Photoshop not working

Edit in Photoshop seems to have stopped working for me, both Edit and Open as Smart Object do not work. Photoshop starts but the file never opens. I'm using Lightroom 5.5, Camera Raw 8.3 and Photoshop CS6. I can of course export to a PS doc and open that.

I think the reason for this "edit-Problem" lies in the fact that you don't use PS CS5.
LR 3 does not work seamlessly with earlier versions of PS - I have worked with LR 3 and CS3 and some things worked and some didn't.
Since I have upgraded to CS 5, all is well.
WW
PS: In case you wondered, I don't get a commission if you buy CS5.
Message was edited by: web-weaver

LR2 and PS4 - merging to HDR, merge to Panaorama and Edit in Layers not working

Hi,
I've recently upgraded from LR to LR2.1 and Photoshop CS to CS4. I've been trying to multi-select images from LR2 and edit them as HDR and Panoramas using the "Edit in->" merging options.
None of them seem to work. I can see PS CS4 being opened, but then nothing happens. No image is opened or dialog box shown anywhere. Closing PS doesn't prompt for any saving, etc.
I think the problem is because my RAW/DNG files are stored on a NAS. Trying to do the merge from PS directly using the files also doesn't work. But if I copy the files to my local HDD, then things work a lot better.
Is this a known issue with CS4?
iMac, OSX Leopard, 4Gb RAM.

I have done some more tests:
Setting up CS3 as "Additional External Editor" in LR2.1 Edit/Preferences/External Editing works fine with RAW ( .NEF ) files on NAS-drive.
Also CS4 as "Additional External Editor" works the same way. The procedure is the same as when CS3 was the standard editor, ie exporting a TIFF file from LR2.1.
The difference is that the standard CS4 integration is not writing TIFF files från LR, but has a more tight integration to CS4, which is much faster. But still not working when RAW files are on NAS. ( LR catalog files are on local disk ).
Configuration:
Dell dimension 9200
Windows Vista Home Premium ( 32-bit )
D-link DNS-323 NTFS file system
Lightroom 2.1
Photoshop CS4 Extended
Latest updates installed.

Photo Edit in CS4 not working

Hello,
THE SETUP
I have LR 3.3 and PS CS 4 Version 11.0.2 on a Mac running OS X.6.7.
My "About Lightroom" screen reports the presence of Camera Raw 6.3.
In my LR preferences under "External Editing" tab, I have the option to "Edit in Adobe Photoshop CS4" as PSD / sRGB / 16 bit / rez 300. There is no "Additional External Editor" present.
I have installed in Library/Application Support/Adobe/Plug-Ins/CS4/File Formats the Camera Raw Plug-in version 5.7. When I choose Photoshop>About Plugin>Camera Raw I see that CR version 5.7.0.213 is present.
THE PROBLEM
When I select photo(s) [CR2 file(s)] in LR3 and choose Photo>Edit in> none of the external edit-in-Photoshop options work. First, I get a message saying "This version of Lightroom may require the Photoshop Camera Raw plug-in version 6.3 for full compatibility."
I resent this suggestion, since that version of Camera Raw only works with CS5.
When I click "Open Anyway," PS opens and loads, but that's it. None of the images from LR appear.
I get the same (non)-results with all of the options (edit in CS4, HDR, panorama, smart object, etc.) under "Photo>Edit In." Photoshop launches, but no image appears.
The only way I can get a photo to open in PS from within LR is to choose Photo>Edit in>Edit in Adobe Photoshop CS4, and then when the warning dialog comes up about the Camera Raw plug-in version, click "Render in Lightroom." When I do that, LR renders the image and it opens in CS4. But that doesn't help me do what I really want to do, which is to select bracketed exposures in LR, merge them to HDR in CS4, and save them back to LR.
I have searched for help on this and come up dry. I did find this http://www.lightroomforums.net/showthread.php?9974-Open-as-layers-in-Photoshop-command-not -working, but I reinstalled the CR 5.7 plug-in as described and saw no change.
Any suggestions appreciated. Thanks in advance.
Message was edited by: GeorgTrakl

Lr 3.3 and CS4 are not fully compatible so your experience is the result of that.
You will have to bite the bullet and upgrade to CS5 if you dont want to "Render in LR".
I've worked for quite a while with LR 3 and CS3 and experienced similar problems - the only way out is that you select "Render in LR".
It's not such a big deal. When you select "Render in LR", Lr creates the psd that then opens in CS4.
With CS5 it works this way: The RAW file opens in CS5 but when you save in CS5 a psd is generated.
WW

Bulk edit media kind not working

Hello,
Last night I bulk edited my library from media kind "music" to "voice memo." This worked fine. Everything is now set to voice memo. However, I am now trying to edit selected albums back to music, and this does NOT work. But it DOES work if I select each song individually and change it.
This is incredibly frustrating.
Anyone know why this is? Or better yet, does anyone have a fix or a script that will allow me to select a batch of files and change the media kind from voice memo to music?

I discovered from a tweet by @dougscripts, that it is simply not possible to do en masse or with a script: "@dougscripts To all asking: AppleScript cannot change the "Media Kind" property of a podcast track to a music track."
(I had changed mine for the same reason regarding iTunes Match, and also unsuccessfully tried the same 2-step process.)
But, I did figure out a workaround that will save your sanity.
1. Add all the tracks you want to change into a single playlist.
2. Then use a mouse recorder (I used this one http://www.jitbit.com/mac-mouse-recorder/ ... the demo lasts long enough for you to change what you need to).
3. Record the action of changing 1 track from voice memo to music manually.
4. Set the mouse recorder to repeat the amount of times as there are songs in your playlist.
(You won't be able to use your computer while it's working, so if you have a huge library it's best to do it while you're sleeping. Also, don't speed up the playback of the action too much, as it will fail.)

Orion.edit.validator example not working

The example mentioned in the below link for orion.edit.validator does not seem to work.
https://wiki.eclipse.org/Orion/Documentation/Developer_Guide/Plugging_into_the_editor
Please help with the proper code snippet or example for orion.edit.validator

The code on that page was outdated, I fixed it.
Here's a gist showing a complete working example: https://gist.github.com/mamacdon/cb1e20fd8f967e97cfb4

Messages and edit buttons do not work. How can I fix this?

My messages & Edit buttons on the text conversation screen do not work/unresponive. Cannot get back to main messsage screen or use edit to forard or delete texts. Help??

Try a reset, see if that corrects the problem.

Edit-in-place NOT working...

Similar Messages

Maybe you are looking for