Edit in PS in LR 5.5 fails with PS CC 2014

Just upgraded to PS CC 2014 on a Mac. When working in LR 5.5, Edit in PS command opens the PS but image does not open. This is for DNG and JPG files. Works fine for previously created PSD files. What's wrong?

See Edit In doesn't work in Lightroom 5.5 from Photoshop CC 2014.

Similar Messages

  • Adobe Services fail with Adobe CC 2014 on Windows 8.1

    Hi, every time I try to open Adobe Extensions Manager CC I get this window (in Spanish):
    I tried to uninstall and re-install several times and nothing.
    Thanks for your help.

    It seems that you don't have the same version of "Adobe Extension Manager CC.exe" and "ExManCoreLib.dll". Perhaps you encountered update failure. Please right click these two files and select "Properties", check "Product version" in the "Details" tab page. If they are different, Please uninstall it, download installer from Adobe - Exchange : Download the Adobe Extension Manager and install it, then update it to the latest version.

  • Oracle Database Express Edition 11g Release2 11.2.0 silent Installation failing with port8081 error

    Hi everyone,
    We are trying to create silent(unattended) install package to install Oracle database 11g express edition 11.2.0 silently on our machines. We modified the provided .iss file as per the requirement and tried to install with below command,
    setup.exe /verbose /s /f1"c:\DISK1\response\oracleXE-install.iss" /f2"c:\DISK1\oracle_log.txt" /v" /l*v "c:\DISK1\oracle_msi_log.txt""
    Installation is failing with below error from the log file,
    1: OracleXE-Server-Install-Message: Port 8081 is in use. Specify a different port number.
    Installshield 11:22:22: Installation aborts, ready to shut down.
    Port 8081 is being used by mcAfee in our organization. We tried passing a different port number for Http in the response file(.iss), but it is failing with same reason.  We have searched foruns and found that we need to stop the port8081 during the oracle XE installation and can start it later once the installation is completed. But As port 8081 is being used by McAfee in our organization, we could not stop it even during oracle XE installation as it creates security issues.
    I am attaching the MSI log(failure log) and modified .iss(modfied .iss file to .iss.txt to be able to attach) files. Please look into it and suggest how can we achieve silent installation in this case.

    Pl see previous discussions about this topic - seems to be a limitation of the silent install process
    OracleXE-Server-Install-Message: The 8081 port is in use.

  • When editing .ccp file fails with "corrupted package" error

    Hello.
    I usually créate packages on my local computer, and then copy them to a network drive, for deployment.
    However when I try to edit a package I made, the creative cloud packager fails with a "Selected package is corrupt" message. I tried to map the folder to a network drive, or copy to a local folder but it doesn't work.
    It seems to only work if I copy it in the very same folder where it was created. However, I have a few packages of which i don't knwo the original location.
    What can I do to edit this packages?
    Thanks.

    Hi alisterblack.. Thanks for your response.
    But, how can I know the cause of "selected package  is corrupt"..? I never touch that .ccp file.
    I downloaded the full package some months ago in one virtual machine which already been deleted. I got the full package of 13 GB then I moved them to my file server and now it is successful to be deployed with 2,5 hours to complete each computer. So this full package is valid, however the time to deploy is unacceptable and I need to edit the package. How come your package manager refer to cache instead of the full package that is already downloaded completely?
    Can you make your Adobe Package Manager has ability to edit my downloaded package? Or alternatively, is there any other method to deploy/install the selected Adobe program one by one?
    I hope you know how it is
    -when it takes 2,5 hours to complete the installation to a client computer with Core i7, 16 GB of RAM
    -when it takes the whole night (more than 7 hours) to download some gigabytes of your packaged while my internet connection is 80 Mbps
    -when I re-download to re-build the package, the chance to success is 50% with the same error message [ERROR] AdobePackageBuilder - Failed to unzip the file blablabla..
    Thank you for your understanding.

  • Atempt to start OMS for Grid Control 11g fails with - Unexpected error occu

    Hello,
    I am running Grid Control 11g.
    Repository DB is 11.2.0.1
    Both the Grid Control and DB server are running in same machine - redhat 5.
    When trying to start the oms, this fails with the below error:
    Oracle Enterprise Manager 11g Release 1 Grid Control
    Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
    Starting WebTier...
    WebTier Successfully Started
    Starting Oracle Management Server...
    Oracle Management Server is not functioning because of the following reason:
    Unexpected error occurred. Check error and log files.
    The emctl.log shows the following error which I am unable to debug:
    2011-09-13 11:20:05,619 [main] DEBUG oms.StatusOMSCmd processStatusOMS.138 - HTTP port in emgc property file: 7202
    2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.139 - HTTPS port in emgc property file: 7301
    2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.155 - Using http port.
    2011-09-13 11:20:05,620 [main] DEBUG oms.StatusOMSCmd processStatusOMS.195 - Attempting to connect to http://<host>.<domain>:7202/em/console/logon/logon
    2011-09-13 11:23:05,596 [main] ERROR oms.StatusOMSCmd processStatusOMS.239 - Read timed out
    java.net.SocketTimeoutException: Read timed out
    at java.net.SocketInputStream.socketRead0(Native Method)
    at java.net.SocketInputStream.read(SocketInputStream.java:129)
    at HTTPClient.BufferedInputStream.fillBuff(BufferedInputStream.java:206)
    at HTTPClient.BufferedInputStream.read(BufferedInputStream.java:126)
    at HTTPClient.StreamDemultiplexor.read(StreamDemultiplexor.java:348)
    at HTTPClient.RespInputStream.read(RespInputStream.java:147)
    at HTTPClient.RespInputStream.read(RespInputStream.java:108)
    at HTTPClient.Response.readResponseHeaders(Response.java:1107)
    at HTTPClient.Response.getHeaders(Response.java:832)
    at HTTPClient.Response.getStatusCode(Response.java:331)
    at HTTPClient.RetryModule.responsePhase1Handler(RetryModule.java:92)
    at HTTPClient.HTTPResponse.handleResponseImpl(HTTPResponse.java:872)
    at HTTPClient.HTTPResponse.access$000(HTTPResponse.java:62)
    at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:839)
    at HTTPClient.HTTPResponse$2.run(HTTPResponse.java:837)
    at HTTPClient.HttpClientConfiguration.doAction(HttpClientConfiguration.java:666)
    at HTTPClient.HTTPResponse.handleResponse(HTTPResponse.java:837)
    at HTTPClient.HTTPResponse.getStatusCode(HTTPResponse.java:242)
    at oracle.sysman.emctl.oms.StatusOMSCmd.processStatusOMS(StatusOMSCmd.java:199)
    at oracle.sysman.emctl.wls.OMSController.statusOMS(OMSController.java:867)
    at oracle.sysman.emctl.wls.OMSController.startOMS(OMSController.java:606)
    at oracle.sysman.emctl.wls.OMSController.main(OMSController.java:213)
    2011-09-13 11:23:05,597 [main] INFO wls.OMSController statusOMS.950 - statusOMS finished with result: 9
    In emgc.properties, I have MSPORT=7202.
    I have used the notes in Metalink 1287904.1, but without resolution.
    I am able to connect with sqlplus, with user sysman, without issues. There are no invalid objects under sysman.
    emoms.trc shows the following:
    2011-09-11 15:51:53,160 [JobWorker 22356:Thread-108] WARN jdbc.ConnectionCache _getConnection.353 - Invalid or Stale Connection found in the Connection Cache
    java.sql.SQLException: Invalid or Stale Connection found in the Connection Cache
    Thank you for support.
    Regards,
    Horia
    Edited by: horia.berca on Sep 13, 2011 5:29 AM
    Edited by: horia.berca on Sep 13, 2011 5:32 AM
    Edited by: horia.berca on Sep 13, 2011 5:35 AM
    Edited by: horia.berca on Sep 13, 2011 5:45 AM

    Hello again;
    Check the solution in this: ( and note the multiple versions of oracle it covers )
    UNABLE TO FIND GRID INFRASTRUCTURE LISTENER (Doc ID 1483234.1)
    Best Regards
    mseberg

  • Rendering of Proxies in AE fails with generic error messages.

    *sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
    I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
    The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
    The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
    So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
    I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
    Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
    Is there anything at all I can do to make successful proxy generation less like winning the lottery?

    Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
    But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
    http://forums.adobe.com/message/2404464
    Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs.

  • "New lifecycle definition" fails with "Unexpected error"

    This problem has been previously posted without resolution.
    Select "Lifecycle Definitions -> New lifecycle definition".
    Error:
    "Unexpected error, unable to find item name at application or page level.
    A severe error has occurred. Possible causes may include moving directly to a page using the browser history or Back key, multiple users attempting to change the same data or an application defect. Please visit the Support page under the Help Tab to report the error.
    Press here to return to the parent page"
    A resolution to this would be apprciated.
    Please note this problem is based on APEX 4. About to retest on APEX 3.2 to see if it is happening there.
    Edited by: user774105 on 7/03/2011 17:26
    Have back ported to 3.2 and the problem no longer occurs. Not sure what has changed between versions, but there are a number of links in the Assitant that fail with the above error in APEX 4.
    Edited by: user774105 on 7/03/2011 19:45

    Hi
    I have also encounter the same error . Currently i have apex version 4.
    User: SYSTEM
    Unexpected error, unable to find item name at application or page level.
    A severe error has occurred. Possible causes may include moving directly to a page using the browser history or Back key, multiple users attempting to change the same data or an application defect. Please visit the Support page under the Help Tab to report the error.
    Press here to return to the parent page
    Any solution for this with apex version 4
    Thanks and Regards
    Ganesan Sivaraman

  • Cube refresh fails with an error below

    Hi,
    We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
    Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
    java.io.EOFException
    When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
    Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
    Thanks,
    mani
    Edited by: sdid on Jul 29, 2012 11:16 PM

    I work with 'sdid' and here is a better explaination of what exactly is going on -
    As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
    Here is how our shell looks like -
    /opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
    Here is what 'CubeRefresh.sh' looks like -
    PLN_JAR_PATH=/opt/hyperion/Planning/bin
    export PLN_JAR_PATH
    . "${PLN_JAR_PATH}/setHPenv.sh"
    "${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
    And here is what 'setHPenv.sh' looks like -
    HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
    export HS_JAVA_HOME
    HYPERION_HOME=/opt/hyperion
    export HYPERION_HOME
    PLN_JAR_PATH=/opt/hyperion/Planning/lib
    export PLN_JAR_PATH
    PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
    export PLN_PROPERTIES_PATH
    CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
    jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
    TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
    N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
    3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
    PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
    0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
    RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
    CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
    rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
    export CLASSPATH
    case $OS in
    HP-UX)
    SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
    export SHLIB_PATH
    SunOS)
    LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
    export LD_LIBRARY_PATH
    AIX)
    LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
    export LIBPATH
    echo "$OS is not supported"
    esac
    We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
    From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
    Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
    java.io.EOFException
    This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
    On the other hand the manual refesh from within Planning works.
    We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
    Any help on this would be greatly appreciated.
    Thanks
    Andy
    Edited by: Andy_D on Jul 30, 2012 9:04 AM

  • Windows Server 2008 R2 Backup failing with error - 0x8004231F

    Hi,
    I have Windows Server 2008 R2 Web Edition. Everything was working fine until recently. I tried checking for the log files, but I see that there are no log files that are created now in the location C:\Windows\Logs\WindowsServerBackup. The only files that
    are being created recently are of the type mentioned below.
    Wbadmin.1.etl
    WbadminUI.0.etl
    etc.
    I tried removing the old backup and starting a new backup. But, even now it is failing with the same error.
    When running the backup from the PowerShell, the output is as below.
    PS C:\Users\administrator> Wbadmin start backup -backupTarget:\\localhost\E$\WindowsImageBackup\Server01 -systemState -vss
    Copy
    wbadmin 1.0 - Backup command-line tool
    (C) Copyright 2004 Microsoft Corp.
    Note: The backed up data cannot be securely protected at this destination.
    Backups stored on a remote shared folder might be accessible by other
    people on the network. You should only save your backups to a location
    where you trust the other users who have access to the location or on a
    network that has additional security precautions in place.
    Retrieving volume information...
    This will back up volume System Reserved (100.00 MB) (Selected Files),SAN(I:) (Selected Files),Local Disk(C:) (Selected
    Files) to \\localhost\E$\WindowsImageBackup\Server01.
    Do you want to start the backup operation?
    [Y] Yes [N] No y
    The backup operation to \\localhost\E$\WindowsImageBackup\Server01 is starting.
    Starting to back up the system state [12/8/2013 9:29 AM]...
    Creating a shadow copy of the volumes specified for backup...
    Creating a shadow copy of the volumes specified for backup...
    Creating a shadow copy of the volumes specified for backup...
    Summary of the backup operation:
    The backup of the system state failed [12/8/2013 9:30 AM].
    Log of files successfully backed up:
    C:\Windows\Logs\WindowsServerBackup\Backup-08-12-2013_09-29-49.log
    Log of files for which backup failed:
    C:\Windows\Logs\WindowsServerBackup\Backup_Error-08-12-2013_09-29-49.log
    There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes
     to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup
     storage destination and volumes included in the backup.
    Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more th
    an 500 megabytes, the minimum is 320 megabytes of free space.
    Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte.
    ERROR - A Volume Shadow Copy Service operation error has
    occurred: (0x8004231f)
    Insufficient storage available to create either the shadow copy storage file or other shadow copy data.
    If you see the free space available in each of the drives, they are in plenty.
    C:\ 7.5 GB free of 70 GB
    E:\ 250 GB free of 499 GB
    I:\ 86.7 GB free of 350 GB
    I am out of any hints on how I can proceed now. Has any one had similar issues? Can any one give any hint on this? Thanks.
    Thanks.

    Some Additional info.
    Shadow Copy Storage association
       For volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\)\\?\Volume{a9f
    b0474-f1bd-11e0-b235-806e6f6e6963}\
       Shadow Copy Storage volume: (\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}
    \)\\?\Volume{a9fb0474-f1bd-11e0-b235-806e6f6e6963}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 32 MB (32%)
    Shadow Copy Storage association
       For volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01d1}\
       Shadow Copy Storage volume: (I:)\\?\Volume{ddf6a51c-1282-11e3-b291-000c293b01
    d1}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 35 GB (10%)
    Shadow Copy Storage association
       For volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01bd}\
       Shadow Copy Storage volume: (E:)\\?\Volume{0e3bf713-125d-11e3-b2dd-000c293b01
    bd}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 149.999 GB (30%)
    Shadow Copy Storage association
       For volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e6963}\
       Shadow Copy Storage volume: (C:)\\?\Volume{a9fb0475-f1bd-11e0-b235-806e6f6e69
    63}\
       Used Shadow Copy Storage space: 0 B (0%)
       Allocated Shadow Copy Storage space: 0 B (0%)
       Maximum Shadow Copy Storage space: 4.99 GB (7%)
    Hope this might also help you experts to get a little more information.

  • CLob update failing with PLS-00172: string literal too long

    I have a clob column which needs to updated with a message on message_id
    Table description
    SQL> desc cl_message1
    Name Null? Type
    MSG_ID NOT NULL NUMBER(10)
    DATA NOT NULL CLOB
    Update statement:
    variable data1 clob;
    begin
    :data1:='TESTHDR^Add^200812310374^2012-08-19 15:53:22.0^
    TESTHDR^Add^200812310374^5652^C0000029^2012-08-19 15:46:49.0^
    TESTDWN^ADD^200812310374^5652^G^03^00000999990000722444^
    ... ----------------------------------------------------------------------------------------- 2376 lines of text-------------------------
    TESTDWN^ADD^200812310374^5674^G^10^00000999990000743289^
    TESTEND^5674^';
    UPDATE cl_message1
    SET DATA=:data1
    WHERE
    msg_id = '989';
    END;
    When I run this statement it fails with
    SQL> @test_clob_insert.sql
    :data1:='WAVEHDR^Add^200812310374^2012-08-19 15:53:22.0^
    ERROR at line 2:
    ORA-06550: line 2, column 10:
    PLS-00172: string literal too long
    As per my understanding a bind variable can store maximum value of clob. Not sure why this is throwing this error. Please help
    Regards
    This column is stored in_row.
    SQL> r
    1* select owner,table_name,column_name,in_row from dba_lobs where table_name='CL_MESSAGE1'
    OWNER TABLE_NAME COLUMN_NAME IN_
    VEERA CL_MESSAGE1 DATA YES
    Edited by: 953621 on Aug 19, 2012 10:34 PM
    Edited by: 953621 on Aug 19, 2012 11:44 PM

    953621 wrote:
    As per my understanding a bind variable can store maximum value of clob. Not sure why this is throwing this error. Please helpYes, if the bind variable is declared as a clob, then it can store the maximum size of the clob, but that's not your issue.
    Your issue is that you are setting the clob data using a string literal i.e. a single string between quotes. There is a limit to the size of string literals, so you would have to build up the clob by appending many string literals together instead.

  • WEB SERVICE PROXY GENERATED USING 11.1.1.5.0 WSDL FAILS WITH 11.1.1.6.0

    I have created a Web Service Proxy project in Jdev using BI Publisher 11.1.1.5.0 WSDL (ReportService). Generated ReportService_Service method uses following QName to get the port:
    namespaceURI = "http://xmlns.oracle.com/oxp/service/v2"
    localPart = "*v2/ReportService*"
    Reports are generated successfully via Web Services when using BI Publisher 11.1.1.5.0 but when I use BI Publisher 11.1.1.6.x, it fails with this exception:
    +'javax.el.ELException: javax.xml.ws.WebServiceException: {http://xmlns.oracle.com/oxp/service/v2}v2/ReportService is not a valid port. Valid ports are: {http://xmlns.oracle.com/oxp/service/v2}ReportService'+
    I noticed that if the Web Service Proxy project is created using BI Publisher 1.1.1.1.6.0 WSDL (ReportService), the generated ReportService_Service method uses following QName to get the port:
    namespaceURI = "http://xmlns.oracle.com/oxp/service/v2"
    localPart = "*ReportService*"
    We are supporting both 11.1.1.5.0 and 11.1.1.6.x, so is there a way to make it work with both.
    FYI, I have tried removing v2 but then it only works with 11.1.1.6.0 and fails with 11.1.1.5.0.
    +Caused By: javax.xml.ws.WebServiceException: {http://xmlns.oracle.com/oxp/service/v2}ReportService is not a valid port. Valid ports are: {http://xmlns.oracle.com/oxp/service/*v2}v2/*ReportService+

    Dear,
    found the solution (after trying last 1-2 days ...).
    I was already using java 1.7 update 7.
    I had to start java settings and to deselect Java 1.7.0_07.
    Instead I selected latest Java version from Apple: 1.6.0_35-b10-428.
    With these settings the installer finishes without crash.
    Kind regards
    Lorenz
    Edited by: Lorenz on Oct 4, 2012 1:47 PM

  • [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messa

    Error
    [Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.  There
    may be error message
    I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
    My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
    But the error still occurs .
    I checked on Google and  many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
    Mudassar

    Thats my connection string
    Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
    Excel 2010 installed and its 32 bit edition
    Are you referring to install this component -AccessDatabaseEngine_x64.exe?
    http://www.microsoft.com/en-us/download/details.aspx?id=13255
    Mudassar
    You can try an OLEDB provider in that case
    see
    http://dataintegrity.wordpress.com/2009/10/16/xlsx/
    you might need to download and install ms access redistributable
    http://www.microsoft.com/en-in/download/details.aspx?id=13255
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • I can register an OCX file in Windows 7 x64 without incident but with Windows 7 x32 I get a p-up that says "DllRegisterServer failed with error code: 0x80004005. What gives???

    Hey yeah.  not much else to say.  The title says it all.
    I'm trying to register an OCX file that my video editing application requires to work properly.
    I'm using a  Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files.  Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
    But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
    Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

    I don't know what happened. 
    My Video Editing software was working fine a few days ago in Windows 7 x64.  Tried using it this morning....couldn't load the .mpg video clip.  Just stood there looking stupid like it does in the 32-bit version of Windows 7.
    I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool".  I made a TV recording then used the Video Editor to edit it and it worked fine.  Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all.  This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.

  • Partition failed with the error:  No space left on device

    I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
    +*The disc cannot be partioned because some files cannot be moved.*+
    +Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
    so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
    +*Partition failed.*+
    +Partition failed with the error: No space left on device+
    but I have 64GB free space!
    how must I "+Restore your information to the disk+" or what else can I do?
    thanks!

    arajs wrote:
    I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
    +*The disc cannot be partioned because some files cannot be moved.*+
    +Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
    so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
    +*Partition failed.*+
    +Partition failed with the error: No space left on device+
    but I have 64GB free space!
    how must I "+Restore your information to the disk+" or what else can I do?
    thanks!
    This is a standard error message.
    If you would have checked into the bootcamp forum you would have instantly found the solution.
    http://discussions.apple.com/forum.jspa?forumID=1244&start=0
    All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
    The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
    Works every time.
    Message was edited by: Theodore

  • Import error imp-00017: following statement failed with oracle error 1659:

    Hi all,
    I am trying to import a file (dmp) which is of 1.63GB size,
    when I type
    imp
    dbname/pwd@db
    c:\filepath
    30720
    no
    no
    yes
    yes
    yes
    I am getting the error imp-00017: following statement failed with oracle error 1659:
    -- end it says Ora-01659 unable to allocate minextents beyond 1 in tablespace USERS
    --unable to create INITIAL extent for segment in tablespace USERS
    --import terminated successfully with warnings
    when I looked into
    select maxbytes,file_name from dba_data_files where tablespace_name='USERS';3.4360+10 c:\oracle\product\10.2.0\oradata\orcl\users01.dbf
    kindly help me in solving this is.
    Regards,
    aak
    Edited by: AAK 460425 on Apr 12, 2009 6:33 PM

    Thanks,
    select bytes from user_free_space where tablespace_name='USERS'
    BYTES
    458752
    720896
    458752
    655360
    43384832
    is the size less?
    My apology I have updated this in the below thread, which is same as this one.
    Re: Import error

Maybe you are looking for