Edit invoice smartform to email with pdf attachment

Hi,
I need to send the invoice details by mail that are currently only printed through the edit function.
When i go to VF02 enter invoice number and then edit, is it possible to send this message through email with the invoice as pdf attachment?
Also it would be necessary to enter receivers email at that time.
Maybe there is an exit before the sending that could raise a popup...
Do you think this can be done this way?
Thanks,
Laurent.

Hi Laurent
I have done this succesfully in a different way:
1) Create a Z Table for the email ID per Bill to party - this table accomodates up to 999 email ids per customer and also has a column for CC
2) Create a new output type for EMAIL purposes with the Transmission medium as 1 -
assign the output program and form to this.
In the program, add new code to refer to the new Z table for getting the email ids of respective Bill to parties
In the program add code to convert the form to PDF format and attach to the email craeted.
Your ABAPPER should be able to assist in this code writing - in my case it took some time to get the desired result but the customers are very happy with the end result -
best wishes
Nandu

Similar Messages

Send Invoice email with pdf attachement through DI?

Hi all,
is it possible to send an Invoice email with pdf attachement through DI as it can be done through UI?
Best Regards,
Vangelis

Hi Vangelis,
I Don't think that the DI API has that functionality (but I am not sure).
However with .Net's System.Net.Mail it should be quite easy to build.
Good luck,
Johan

Custome FM to create Email with PDF attachment

Hi Experts,
I am working in Smart form. my requriment is to create a Custom Function module , for sending email with PDF attachment to the customer. PDF is nothing but which ever I create smart form.
How can I approach , please give me a suggestion or send me a sample code, if any one create.
1. This FM should work like : convert form to PDF and send Email to particular customer.

Hi,
Steps to convert Smartform to PDF,
1 Call smartform through FM SSF_FUNCTION_MODULE_NAME.
   CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
2 Converting Smartform to OTF and in turn to PDF
   Set Following parameter in order to convert Smartform into OTF.
gs_cparam-no_dialog = 'X'.   " Suppressing the dialog box
gs_cparam-preview = 'X'.     " for print preview
gs_cparam-getotf = 'X'.     " To get Output in OTF
    CALL FUNCTION g_fmodule
      EXPORTING
        control_parameters = gs_cparam
        output_options     = gs_outoptions
      IMPORTING
        job_output_info    = gt_otf_from_fm
      TABLES
        gt_final           = gt_final
     gt_otf[] = gt_otf_from_fm-otfdata [].
    CALL FUNCTION 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
        max_linewidth         = 132
      IMPORTING
        bin_filesize          = g_bin_filesize
      TABLES
        otf                   = gt_otf
        lines                 = gt_pdf_tab
    CHECK sy-subrc = 0.
    g_bin_filesize = g_bin_filesize + 1.
Transfer the 132-long strings to 255-long strings
    LOOP AT gt_pdf_tab into gs_pdf_tab.
      TRANSLATE gs_pdf_tab USING ' ~'.
      CONCATENATE g_buffer gs_pdf_tab INTO g_buffer.
    ENDLOOP.
    TRANSLATE g_buffer USING '~ '.
    DO.
      gs_mess_att = g_buffer.
      APPEND gs_mess_att to gt_mess_att.
      SHIFT g_buffer LEFT BY 255 PLACES.
      IF g_buffer IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
3 For Sending Mail use following mail,
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = ls_doc_data
      put_in_outbox              = 'X'
      sender_address             = l_sender_address
      sender_address_type        = l_sender_address_type
      commit_work                = 'X'
    TABLES
      packing_list               = lt_packing_list
      contents_bin               = lt_attachment
      contents_txt               = lt_message
      receivers                  = lt_receivers
I hope this could help you,
Please let me know if any issue.
Thanks & regards,
ShreeMohan
Edited by: ShreeMohan Pugalia on Jul 18, 2009 8:02 AM
Edited by: ShreeMohan Pugalia on Jul 18, 2009 8:03 AM
Edited by: ShreeMohan Pugalia on Jul 18, 2009 8:05 AM

Sending smartform through email as PDF attachment

Hi,
I want to send a smartform through email as pdf attachment.In the code I have hardcoded the receiver mail id.But I don't want this to be sent only to a particular receiver.I want this to be sent as many people as I can without hardcoding their mail id's in the program.How can I do that?
Regards,
Hema

**Data Declarations
**Internal Table
DATA : BEGIN OF it_spfli OCCURS 0,
 carrid LIKE spfli-carrid,
 connid LIKE spfli-connid,
 END OF it_spfli.
DATA: it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
 it_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
storing receivers
 it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
**storing file attachment data
 it_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE, gd_doc_data LIKE sodocchgi1,
 gd_error TYPE sy-subrc,
 l_gntxt LIKE t357g_t-gntxt,
 lv_message(100) TYPE c.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
 WITH HEADER LINE. "storing mail body
DATA : psubject(30) TYPE c VALUE 'Sample Mail'. "subject of the mail
DATA : ld_format TYPE so_obj_tp , "file format
 ld_attfilename TYPE so_obj_des, "file name
 w_cnt TYPE i.
**Selecting the data
SELECT carrid connid INTO TABLE it_spfli FROM spfli WHERE carrid EQ 'AA'.
**Perform for populating mail body
PERFORM populate_message.
**Perform for populating file attachment
PERFORM populate_attachment.
**Perform for populating mail characteristic info
PERFORM populate_pack.
**Perform for populating receivers
PERFORM populate_receivers.
**Perform to send mail
PERFORM send_mail.
*& Form populate_message
 text
--> p1 text
<-- p2 text
FORM populate_message .
**Populating the body
lv_message = 'Sample mail for testing purpose.'.
APPEND lv_message TO it_message.
ENDFORM. " populate_message
*& Form populate_attachment
 text
--> p1 text
<-- p2 text
FORM populate_attachment .
**Populating the attachment file with the data from final intenal table
CONCATENATE 'CARRIER ID'
 'CONNECTION ID'
 INTO it_attachment SEPARATED BY
 cl_abap_char_utilities=>horizontal_tab.
CONCATENATE cl_abap_char_utilities=>cr_lf it_attachment INTO
it_attachment.
APPEND it_attachment.
LOOP AT it_spfli.
 CONCATENATE it_spfli-carrid it_spfli-connid INTO it_attachment SEPARATED BY
 cl_abap_char_utilities=>horizontal_tab.
 CONCATENATE cl_abap_char_utilities=>cr_lf it_attachment INTO
 it_attachment.
 APPEND it_attachment.
ENDLOOP.
ENDFORM. " populate_attachment
*& Form populate_receivers
 text
--> p1 text
<-- p2 text
FORM populate_receivers .
**Populating Mail Recepients
**If there are more than one mail recepient then loop and append them to it_receivers
it_receivers-receiver = '[email protected]'.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
it_receivers-express = 'X'.
APPEND it_receivers.
ENDFORM. " populate_receivers
*& Form populate_pack
 text
--> p1 text
<-- p2 text
FORM populate_pack .
**File Type
ld_format = 'XLS'.
**File Name
ld_attfilename = 'File1'.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject .
gd_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR gd_doc_data.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
READ TABLE it_attachment INDEX w_cnt.
gd_doc_data-doc_size = ( w_cnt - 1 ) * 255 + STRLEN( it_attachment ).
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
APPEND it_packing_list.
**Describe the attachment info
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type = ld_format.
it_packing_list-obj_name = ld_attfilename.
it_packing_list-obj_descr = ld_attfilename.
it_packing_list-doc_size = it_packing_list-body_num * 255.
APPEND it_packing_list.
ENDFORM. " populate_pack
*& Form send_mail
 text
--> p1 text
<-- p2 text
FORM send_mail .
**Function Module to send mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = gd_doc_data
 put_in_outbox = 'X'
 commit_work = 'X'
 TABLES
 packing_list = it_packing_list
 contents_bin = it_attachment
 contents_txt = it_message
 receivers = it_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
ENDFORM. " send_mail

How do I add text message to this email with PDF attachment?

Good day, everyone!
Okay, we have a "z"-version of program RFFOUS_T and some of its include codes. One include code, RFFORIO6, has a form called MAIL_PDF_ADVICE. It is in this form that we are emailing a remittance advice form. The actual form is attached as a PDF file.
Unfortunately, there's no text in the body of the email -- it's just the attachment -- so the users would like us to add a couple basic lines in the body of the email that explain the attachment. I'm pretty new to using this particular FM and emailing the PDF attachment, and I've gotten stuck in my research trying to find out exactly how to do this. I'm guessing this shouldn't be all that difficult, but I'm not finding the right solution. Here's the form:
*& Form mail_pdf_advice
 E-mail PDF advice
 -->IT_ADVICE PDF form (output from Adobe server)
 -->I_PDF_LEN length of PDF advice in bytes
FORM mail_pdf_advice USING it_advice TYPE solix_tab
 i_pdf_len TYPE i.
DATA:
 lt_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
 l_user LIKE soextreci1-receiver,
 ls_send_doc LIKE sodocchgi1,
 lt_pdf_attach TYPE TABLE OF sopcklsti1 WITH HEADER LINE.
CHECK NOT finaa-intad IS INITIAL.
CHECK finaa-nacha EQ 'I'.
*--- determine E-Mail sender and recipient
IF fsabe-usrnam EQ space.
 l_user = sy-uname.
ELSE.
 l_user = fsabe-usrnam. "Office-User des Sachbearb.
ENDIF.
lt_receivers-receiver = finaa-intad.
lt_receivers-rec_type = 'U'. "E-mail address
APPEND lt_receivers.
ls_send_doc-obj_descr = itcpo-tdtitle.
lt_pdf_attach-transf_bin = 'X'.
lt_pdf_attach-doc_type = 'PDF'.
lt_pdf_attach-obj_langu = reguh-zspra.
lt_pdf_attach-body_start = 1.
lt_pdf_attach-doc_size = i_pdf_len.
DESCRIBE TABLE it_advice LINES lt_pdf_attach-body_num.
APPEND lt_pdf_attach.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = ls_send_doc
 sender_address = l_user
 TABLES
 packing_list = lt_pdf_attach
 contents_hex = it_advice
 receivers = lt_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
<error checking code snipped>
Does someone know how to do this? <REMOVED BY MODERATOR> Thanks so much in advance!
Dave
Message was edited by:
 Alvaro Tejada Galindo

Hi Dave,
Table contents_bin is used to pass attachment file and contents_txt is used to pass mail body contents. You need to declare one more int table to give contents for mail body.
For reference check the code below
ut_message is for message body
and ut_attach is having attachement file.
FORM send_file_as_email_attachment TABLES ut_message
 ut_attach
 USING uv_email
 uv_mtitle
 uv_format
 uv_filename
 uv_attdescription
 uv_sender_address
 uv_sender_addres_type
 CHANGING uc_error
 uc_reciever.
DATA: l_error TYPE sy-subrc,
 l_reciever TYPE sy-subrc,
 l_mtitle LIKE sodocchgi1-obj_descr,
 l_email LIKE somlreci1-receiver,
 l_format TYPE so_obj_tp ,
 l_attdescription TYPE so_obj_nam ,
 l_attfilename TYPE so_obj_des ,
 l_sender_address LIKE soextreci1-receiver,
 l_sender_address_type LIKE soextreci1-adr_typ,
 l_receiver LIKE sy-subrc.
DATA: lt_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
 lt_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 lt_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
 lt_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 lt_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 l_cnt TYPE i,
 l_sent_all(1) TYPE c,
 lw_doc_data LIKE sodocchgi1.
l_email = uv_email.
l_mtitle = uv_mtitle.
l_format = uv_format.
l_attdescription = uv_attdescription.
l_attfilename = uv_filename.
l_sender_address = uv_sender_address.
l_sender_address_type = uv_sender_addres_type.
Fill the document data.
lw_doc_data-doc_size = 1.
Populate the subject/generic message attributes
lw_doc_data-obj_langu = sy-langu.
lw_doc_data-obj_name = 'SAPRPT'.
lw_doc_data-obj_descr = l_mtitle.
lw_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR lw_doc_data.
READ TABLE ut_attach INDEX l_cnt.
lw_doc_data-doc_size =
 ( l_cnt - 1 ) * 255 + STRLEN( ut_attach ).
lw_doc_data-obj_langu = sy-langu.
lw_doc_data-obj_name = 'SAPRPT'.
lw_doc_data-obj_descr = l_mtitle.
lw_doc_data-sensitivty = 'F'.
CLEAR lt_attachment.
REFRESH lt_attachment.
lt_attachment[] = ut_attach[].
Describe the body of the message
CLEAR lt_packing_list.
REFRESH lt_packing_list.
lt_packing_list-transf_bin = space.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
DESCRIBE TABLE ut_message LINES lt_packing_list-body_num.
lt_packing_list-doc_type = 'RAW'.
APPEND lt_packing_list.
Create attachment notification
lt_packing_list-transf_bin = 'X'.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 1.
lt_packing_list-body_start = 1.
DESCRIBE TABLE lt_attachment LINES lt_packing_list-body_num.
lt_packing_list-doc_type = l_format.
lt_packing_list-obj_descr = l_attdescription.
lt_packing_list-obj_name = l_attfilename.
lt_packing_list-doc_size = lt_packing_list-body_num * 255.
APPEND lt_packing_list.
Add the recipients email address
CLEAR lt_receivers.
REFRESH lt_receivers.
lt_receivers-receiver = l_email.
lt_receivers-rec_type = 'U'.
lt_receivers-com_type = 'INT'.
lt_receivers-notif_del = 'X'.
lt_receivers-notif_ndel = 'X'.
APPEND lt_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
 EXPORTING
 document_data = lw_doc_data
 put_in_outbox = 'X'
 commit_work = 'X'
 IMPORTING
 sent_to_all = l_sent_all
 TABLES
 packing_list = lt_packing_list
 contents_bin = lt_attachment
 contents_txt = ut_message
 receivers = lt_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Message was edited by:
 Amit Kumar

External Send PO as email with PDF attachment not working

hi,
we are using ECC6, and in txn NACT, Processing routine we can use Sapscript External send > SAPFM06P > ENTRY_NEU > MEDRUCK > PDF and in MN04/5 i create Output record, and in SCOT my PO is ready for transmission from either ME21N/2 and ME9F - works well - email sent with pdf PO attached.
HOWEVER, we have just created a SMARTFORM PO, and with similar settings, i cannot create External send OUTPUT!!! (Output failed in ME9F/ME23N) NACT settings External Send > /SMB40/FM06P > Z_MMPO_A > PDF
In SCOT > SMTP > Internet X > Sapscript/SmartForm = PDF.
Does special code need to be entered into Smartform to generate PDF email similar to Sapscript? Any code would be appreciated.
regards Adam

Hi,
You need to build a code to create the Spool OTF output into PDF.
This can be done in Print program, which converts the spool into PDF & sends a mail with PDF attachment.
Please refer this sample program:
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant

Sending an email with pdf attachment in Ecc6

we were in 4.6 c and recentely upgraded to ECC6. we have a program which we are sending email with pdf attachments. now it is breaking, we are able to display the pdf in the screen, but once it became the attachment , it is not going.
we are running the program in forground and not reading the spool and sending it. any idea

http://www.sap-img.com/abap/sending-email-with-attachment.htm
Sending mail to an external maild with PDF attachment.
Creating a PDF attachment and send it via Email
Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface
How to send a ttachment with email.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/abap-Sendthespooldatatoanemail+address.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/convertSpoolrequesttoPDFandsendase-mail
Friend just have a look in the forum itself, there are many posts for ur query, you definetly get exact solution no need to wait for answers/solutions.
All the best

Send email with PDF attachements (Smartform/SAP script)

Hello All,
I have 3 existing programs A, B & C whose output is in SAP Script/Smartform. Now I need to create new program D which needs to execute program A, B & C and then convert their smartform/SAP script output into PDF format and send email with attachements (PDF files). Any pointers how I can proceed. Thanks a lot.

hi Sarita,
v_ctrlparams-no_dialog = 'X'.
v_ctrlparams-getotf = 'X'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname = 'Smartform name'
    IMPORTING
      fm_name = v_func_mod.
CALL FUNCTION v_func_mod
    EXPORTING
      control_parameters = v_ctrlparams
    IMPORTING
      job_output_info    = v_joboutput
    TABLES
      t_nonsigner        = t_nonsigner.
fill the document
doc_chng-obj_name = 'Descriptoipn'.
Fill the subject line
doc_chng-obj_descr = 'Manpowe'.
doc_chng-obj_descr = 'Reminder .
doc_chng-sensitivty = 'P'.
Fill the content of the mail
objcont = 'Dear all,'.
APPEND objcont.
CLEAR objcont.
APPEND objcont.
CLEAR objcont.
objcont =
'The manpower sign-off is pending for the list of employees as per th' &
'e attached sheet.'
APPEND objcont.
CLEAR objcont.
APPEND objcont.
CLEAR objcont.
objcont =
'Please click on the following link for the manpower sign-off:'.
APPEND objcont.
CLEAR objcont.
APPEND objcont.
CLEAR objcont.
DESCRIBE TABLE objcont LINES entries.
READ TABLE objcont INDEX entries.
doc_chng-doc_size = ( entries - 1 ) * 255 + STRLEN( objcont ).
Creating the entry for the compressed document
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num   = 0.
objpack-body_start = 1.
objpack-body_num   = entries.
objpack-doc_type   = 'RAW'.
APPEND objpack.
Creating the document attachment
(Assume the data in OBJBIN are given in BMP format)
LOOP AT v_joboutput-otfdata INTO wa_otfdata.
    APPEND wa_otfdata TO objbin.
    CLEAR wa_otfdata.
ENDLOOP.
DESCRIBE TABLE objbin LINES tab_lines.
objhead = 'NonSignerDetails.otf'. APPEND objhead.
Creating the entry for the compressed attachment
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num   = 1.
objpack-body_start = 1.
objpack-body_num   = tab_lines.
objpack-doc_type   = 'OTF'.
objpack-obj_name   = 'ATTACHMENT'.
objpack-obj_descr = 'NonSignerDetails'.
objpack-doc_size   = tab_lines * 255.
APPEND objpack.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = objpack
      object_header              = objhead
      contents_bin               = objbin
      contents_txt               = objcont
      receivers                  = reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
hope this will help u..
regards,
Santosh Thorat

Sapscript/Smartform via mail with PDF attachment: logo is missing

Hi all
I'm implementing my function to send Sapscript/smartform via mail.
I need to do it because when a message needs to be sent, I have to insert the message as attachment but also to add a text in the body mail.
So I've just created a simple sapscript having a logo (as graphic) and a little text.
I use the fm CONVERT_OTF to convert the OTF to PDF format and the following code to increase the pdf string from 132 to 255 char:
LOOP AT t_pdf.
      TRANSLATE t_pdf USING ' ~'.
      CONCATENATE l_buffer t_pdf INTO l_buffer.
    ENDLOOP.
    TRANSLATE l_buffer USING '~ '.
    DO.
      MOVE l_buffer TO l_attachment.
      APPEND l_attachment TO x_attachment.
      SHIFT l_buffer LEFT BY 255 PLACES.
      IF l_buffer IS INITIAL.
        EXIT.
      ENDIF.
    ENDDO.
All seem to work fine, but as soon as I open the pdf file attached to the mail I can't see the logo
So after calling fm CONVERT_OTF, I've created a pdf file by method GUI_DOWNLOAD, and then upload this file (by GUI_UPLOAD) into internal table for attachment and send the mail.
Now really all work very fine, becaus I can see the logo
Of course I don't want to dowload the file before sending a mail, but I need to send my print directly as pdf attachment
The two ways seem to be equal, they use the same print and the same functions, only the way to upload the internal table for attachment is different:
1) tha abap code above to expand the line from 132 to 255
2) the method GUI_UPLOAD
So something seems to be wrong in the first way because ithe logo is missing in the pdf attachment generated for the mail
Max

Hi
I'm not working on unicode system, anyway I didn't see that parameter BIN_FILE, so I didn't use it
I've read the note 1324547 and I've done just as it explaines: now works fine
I don't know why it doesn't work with old manner (i.e data is treated as character-type), but it worls with the new one (If the data is treated as xstring-type)
I can only suppose the data are corrupted while being elaborated for expand to 255 char....but I don't why
Anyway your suggestion works for me
Thank
Max

Emails with PDF attachment rejected?

I'm having an issue sending emails to one organization with a PDF attachement. I can email them with any other attachments - I zipped the PDFs and they went through fine - and I can send the PDFs to other people. The emails are rejected with "The e-mail system had a problem processing this message. Microsoft Exchange will not try to redeliver this message for you." It's a government agency so talking to their IT dept hasn't been an option so far. Has anyone encountered this and/or have a fix?
I'm using Acrobat Pro 9.2.0, Mac Snow Leopard 10.6.2.
Thanks
Mark

If they are having a problem when the file is zipped, it's doubful that it's an Acrobat problem if you can open it without issue before zipping it.
alaskagrown wrote:
New developments...
Now I'm having issues where people can receive my emails, but when they try to open the PDF attachment it says it's a corrupt file and won't open. I tried zipping it first and sending and that seemed to work a couple times, but now they're still saying corrupt. This is with several different files sent to several different people. I doubted that it was an Acrobat problem, but these new developments make me wonder.

How do I setup an automatic daily email with PDF attachment?

I would like to setup an automatic daily e-mail (that will send every day around 6 AM), with an PDF attachment retrieved from a web URL. The web URL is constant (that is the PDF file name never changes). Any ideas? I've messed around with automator with poor results at best. Thanks in advance!
P.S..... Apologies if this is in the wrong forum!

Just one specific email addres... myself.
There is an online report that is updated every morning at 5:30 AM MST. The ideal solution would email that document to myself every morning.; thus when I wake up, it's sitting in my inbox (iPhone/Macbook/Gmail, etc.)

Email with pdf attachment

Hi all,
Please tell me the steps to send a mail with a pdf attachment.
Regards,
Sabu.

Hi,
Use the following function modules to send a PDF as an attachment
Once you have a spool, you can convert it to PDF by using function module
"CONVERT_ABAPSPOOLJOB_2_PDF"
For sending emails with attachments use:
"SO_NEW_DOCUMENT_ATT_SEND_API1"
here you need to pass
1) DOCUMENT_DATA - For Document Attributes. Here you mainly specifies your list title, description
2) PUT_IN_OUTBOX = SPACE -> If you do not want to save an email.
3) CONTENTS_TXT -> text to be written in email
4) CONTENTS_BIN - > for attachment
5) RECEIVERS -> Recepients of Mail
Regards,
Raj.

Sending email with pdf attachment

I have a need to save several screens from within my flash
projector into a
multi page pdf document and then email the pdf to an address
that the user
types in.
Is this at all possible?
Many thanks
dave

hi
can u provide any sample code to send attachment from oracle mail
any attachment html/text/pdf..
is java mailnecessary for that or object should me stored in database

Email with pdf attached..

Can you please post sample code how to send email using pl/sql proc with password protected pdf attched.
I am using SMTP setting with DEMOmail.

any update

PO output by email with PDF attachment

Dear Friends,
The moment a PO is made the mail shud trigger to the vendor in he shud receive the PO output form in PDF format.
How to configure this. What are the steps.
Looking forward for your co-operation

Hi,
Refer SAPNote 191470 - Purchase order as an e-mail
Follow these steps fro configuring email output -
1. Maintain email address in Vendor Master.
2. Maintain output condition records in MN04 with Medium = 5 and in the communication data enter communication strategy CS01and also enter printer.
3. Check configuration in SPRO MM -> Purchasing -> Messages -> Output Control - > Message Type -> Define Message Type for Outline Agreement. Mainain configuration for External Send. Use standard program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK' ( if not contomized) as the processing routines.
4.You can use Transaction SCOT to trigger the output manually.
5. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.

Edit invoice smartform to email with pdf attachment

Similar Messages

Maybe you are looking for