Edit link option disappeared

Hi ,
am facing a strange issue where the “Edit Link” option under “Quick Launch” in SharePoint 2013 is not appearing for any user (including the farm and site collection  administrators) in
the home page of the root site collection. If a new sub site is created under it, then it starts appearing.
may i know, anyone has faced this issue and the possible resolution.

If the Edit link is not available, the site collection has moved to read only mode. This normally happens when you take dont take proper backup of site collection or backup was cancelled while in progress
http://technet.microsoft.com/en-us/library/ff631148%28v=office.14%29.aspx
Verify that you have the following administrative credentials.
You must be a member of the Site Collection Administrators group for the site collection.
In Central Administration, click Application Management.
On the Application Management page, in the Site Collections section, click
Configure quotas and locks.
If the site collection you want isn't already selected, in the Site Collection section, on the
Site Collection menu, click Change Site Collection. Use the Select Site Collection page to select a site collection.
On the Site Collection Quotas and Locks page, in the Site Lock Information section, select one of the following options:
Not locked to unlock the site collection and make it available to users.
Adding content prevented to prevent users from adding new content to the site collection. Updates and deletions are still allowed.
Read-only (blocks additions, updates, and deletions) to prevent users from adding, updating, or deleting content.
No access to prevent users from accessing the site collection and its content. Users who attempt to access the site receive an error.
If you select Adding content prevented, Read-only (blocks additions, updates, and deletions), or
No access, type a reason for the lock in the Additional lock information box.
Click OK.
If this helped you resolve your issue, please mark it Answered

Similar Messages

  • Edit Links missing from site collection

    I no longer have the ability to choose the "Edit Links" option on the site collection. I have seen the CSS to take it away. I do not have that in my CSS.

    Hi Daniel,
    I've also experienced MilaJoe's issue as well. I have four web applications each with a root Site Collection based on the Enterprise Publishing template. All four of these site collections are missing the "Edit Links" option in the Quick Launch
    and Global Navigation bar.
    I'm a Farm Admin and also a Site Collection Admin to all of the sites in my environment. Here's what I have noticed:
    Any top-level site collection that is NOT a root site has the "Edit Links" option enabled. Any site collection that is build off the managed path (i.e. webapp/sites/project1) works just fine.
    Anything that is provisioned at the root site collection does NOT present the "Edit Links" functionality. This appears to be the case whether or not I start with a Team Site or Enterprise Publishing template. Activating site collection features
    or site features has no affect on the the "Edit Links" functionality at the root.
    Daniel, any chance you can confirm my theory?
    NOTE: Site Owners can still manage navigation under site settings; however, I'd still like for Microsoft to confirm that enabling or disabling the SharePoint Server Publishing Infrastructure feature is what's supposed to control this behavior.
    Thanks,
    Chuck

  • [JS][CS5] How can use 'edit with' option for link using sripting

    Hi All,
    I Can edit link using Link.editOriginal () if the default application is as i need it will open it from there, when I try to open it with other application instead of default application of link file I can't (usually we "use edit" with option in manually). Is there any option to do it in scripting.
    Any clue will help us to update the large set of links in a single click.
    Thanks in advance,
    Sankar L

    Hi csm_phil,
    You are exactly catch my point, my requirement is to update math type eps file. If my math type equation default application file is illustrator (say) as below
    it will open in illustrator instead of mathtype if i use editOriginal function...
    Jus i need to open it in mathtype, the link file default application file is whatever it is.
    Thanks,
    Sankar L

  • Folder region edit links disappear!

    All,
    3.0.7.6.2 + 8.1.6.2 NT 4.0
    Created a custom tabset and added it as a portlet to the content area page. then moved the nav bar and folder portlets around. Now when I go to edit the folder style (to edit the folder layout), I don't see the edit links for the folder regions.
    I did this twice and get the same problem. Also, when I click on the edit defaults for the content area folder (while editing the CA page), I get a no data found error. I am able to edit defaults for the nav bar.
    Any tips ?
    Thanks

    Jerry,
    I tried this in multiple ways and have been able to narrow it down to the following case - "It occurs only if you have more than one regions in your page that is placed in place of the Navigation bar portlet". Please try the following steps and see if you can reproduce the bug...
    1. Create a page and
    a) select the Display No Banner option in the Main tab.
    b) add a new region to the page(Now there will be two regions). Don't place any portlet on the page.
    c) select the Publish as Portlet option for the page.
    d) save the page and go back to Navigator.
    2. Create a new content area.
    a) Edit the page of this new content area and remove the Navigation bar portlet.
    b) Now add the page created in step #1 (above) to the region where the Navigation portlet was.
    c) Save the content area page and go back to Navigator
    3. Click on the contents for the content area created above
    a) select the Styles.
    b) Click on the Edit link for the style
    c) select the Folder Layout tab.
    .... do you see the "Edit Folder Region" icons in the folder portlet?
    null

  • XML Content Editing - link disappeared

    Greetings,
    We have recently upgraded our portal from SP11 to SP19, and several KM functionalities changed.
    Beforehand we had an "edit" link while displaying XML forms (left bottom corner), and clicking the link opened an XML editor for that specific document.
    I am 99% sure that this is one of settings under /etc/xmlforms/... folders, which was overwritten during the upgrade, and that this link appeared in SP11 becuase of customization.
    Did anyone ever had to implement such a functionality?
    Thanks in advance!

    Hi Ivan,
    In my opinion this upgrade should not affect on your customized  xml form or KM content. But if in upgrade the template is deleted or overwritten by transporting the old data then your expected result will hamper.
    As you are mentioning about  "/etc/xmlforms/.." folder structure; it is a folder in which actual xml code of your xml form template is stored & we don't  have to do any changes here.
    If you have created edit button functionality  in your code then just look it again. And if you have made provision of it in xml form only then check it the form again & add the ' edit ' functionality by opening it in xml form builder.Or transport the (backup) old xml form templates again by ice package.

  • Discoverer Plus - Manage Link option is not working in Viewer

    I am working on 10.1.2.3 Discoverer Plus. I have created one workbook with multiple worksheets (1 detail sheet and 4 Left Group Report.
    I have created seperate links for 4 worksheets. Drill to Details is working fine in discoverer plus and parameter values passed as per the mapping in managed link option.
    However, when I tried to access the report in Viewer, parameter values is not coming as per the mapping.
    In detail sheet we have several optional parameters
    from One summary Sheet, I am not passing all the values to the parameters in the detailed sheet.
    Those column for which, I am not passing any value is coming as NULL (it should come blank as report is treating NULL as string), so no data found
    - Sachin
    Edited by: SachinK on Feb 26, 2009 10:58 AM

    Thanks Lloyd,
    Drill Down is working fine in Viewer and Plus.
    Parameter's passed from one sheet to another is also working fine in plus but in viewer I have some problems.
    Here are the details of the problem I am facing.
    I have 2 Summary Sheets and 1 Detail Sheet
    Sheet 1: 3 Parameters (Summary)
    Sheet 2: 4 Parameters (Summary)
    Sheet 3: 7 Parameters (Details)
    When I am clicking on Sheet1 to Drill down 3 parameters are having correct values but the 4 parameters which can't be passed to Sheet 3 is coming 'NULL' (NULL string value) so detail report is not showing any data. Similarly for Sheet 2 4 parameters are coming as expected but 3 are coming as NULL.
    When I am defining Manage Link Option, I am doing the mapping for 3 Column for Sheet 1 rest 4 columns are BLANK (no info).
    I hope now my problem will be clear.
    Thanks & Regards
    Sachin
    Edited by: SachinK on Feb 26, 2009 1:26 PM

  • Lightroom - 'edit in' option no longer working

    I have LR version 5.7 and Elements 12.1. I am running a Mac with OS X Yosemite 10.10.1. When using LR the 'edit in' option used to start up Elements automatically. It no longer does this. I have checked the preferences are set correctly in LR. I have deleted the  plist files in the library for both LR and Elements and reopened both programmes to re-establish new plist files but all to no avail. Can anyone help please?LR

    Hi, I followed these instructions, see link below, and reset my LR preferences, and now the "edit-in" PS is working again. At least it did for two files so far. Hopefully this will be the fix. You should try it too.
    Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
    Marion

  • Regarding link option in crystal report 2008

    respected sir,
           how to enable full outer join and right outer join in link option because default is disable????

    well sir,i have selected the multiple  tables and give links to it and when i double click on links only inner join and left outer join is enabled but how to enabled full outer join and right outer join option because by default this options are  disabled
    Edited by: BharatPatel0005 on Sep 3, 2009 10:42 AM
    Edited by: BharatPatel0005 on Sep 4, 2009 7:44 AM

  • Why linked parameter disappears from report in newer versions?

    We are migrating some applications from Crystal Reports 9 and VB6 to C# and Crystal Reports 13.0. We are using same old .rpt without modifications. Some of them contain sub reports with linked parameters pointing to formula fields, and when we try to print or export the reports they are returning an error like this.
    Error in formula  Record_Selection: '{TRN_FILE.TRN_POST_DT} <= {?Pm-@MonthOf}  ' This field is not known.
    Opening the .rpt file with older version (CR9) and taking a look to Change subreport links presents the ?Pm-@MonthOf parameter but when we use newer version of crystal reports (SAP CR 2013)  to open the same file the linked parameter disappears from sub report links.
    Any idea of why this could be happening? , the only way we have found to make reports work in newer version is adding linked parameters again in design mode, but having a lot of reports with this same problem we want this to be our last option.
    Thanks for your comments.

    Hi Jorge
    You don't mention the database so it is difficult to provide useful info. Couple of things I can suggest:
    Enable the option "Verify on first refresh"
    Download CR 2013 (v. 14.1.x) from here:
    SME Free Trials | SME Software | SAP
    and see if the report will run there.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow me on Twitter

  • Edit link in item region portlet is displayed with unwanted banner

    I have several item repositories in the form of pages published as portlets. When adding these portlets I often check the option to display the edit link. When the link is displayed on the page it always shows up with a banner in a completely different color than what is set in the page style. How do I get rid of this, or where can i find the default setting for this so I can hard code it to white or something?

    You cannot change the style of the edit banner in the page portlet.
    Regards,
    Jerry
    PortalPM

  • When right clicking to send a link , the` send link` option does not appear as n option on the menu list.

    the ``send link`` option just disappeared..It happened immediately after an automatic update to firefox when my computer has to be restarted about a month ago.
    sometimes a ``copy link location`` will be on the list...and that will allow me to send on a link..but normally now it rarely appears and send link has disappeared entirely from the right clicked menu box.

    hello bblauman, mozilla does clean up the interface of the browser from time to time - a user study has shown that this context menu entry is only used by a small fraction of the users. however, in case you miss this functionality you could use an addon to recover it: https://addons.mozilla.org/firefox/addon/send-link-in-context-menu/

  • Fix Links option missing from Functions menu

    Version 11.1.2.2.300
    I have Smart View tab that is missing the "Fix Links" option in the Functions menu in Edit section. I have done the following:
    - checked no item has been disabled in Excel options
    - re-installed Smart View on the machine, same result
    - repaired Office , same result
    - logged as another user, same result
    - blown user profile, same result
    - re-imaged machine, same result
    Installed Smart View on another machine, and found that the Fix Links option is also not there.

    Hi,
    Did the issue happen only for you or for multiple users?
    If the issue only happen for one user please try to delete Lync user profile and then test the issue again.
    %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
    Please also make sure Lync client update to the latest version.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • Edit Dashboard option in OBIEE 11.1.1.6 not visible

    Hi all
    Recently i installed OBIEE 11.1.1.6 with BIAPPS 7.9.6.4. I couln't see edit dashboard option in any of the dashboards..
    i am logging with weblogic user only.. I tried with creating diff user's also.. even then i am unable to view that..
    please help me out asap?

    Hi if you can created new users and groups u should assign the application roles to that users and groups..
    And u should give the Administrator privileges to that group.Then only you have the read and write options....
    For reference please follow this link..
    http://www.rittmanmead.com/2012/03/obiee-11g-security-week-managing-application-roles-and-policies-and-managing-security-migrations-and-deployments/
    Please mark if it helps you....

  • Content Collector Tool - Link Options (InDesign CC)

    I've created a link and amended a headline (40pt size) in my print (parent) version and I want to link that change to the headline (20pt size) in my iPad (child) version without losing the type size? I've ticked the boxes of what I want to preserve in the link options panel but when I update the link it still warns me that I will lose any local edit changes (it reverts to the 40pt size headline in the parent version). How do I solve this problem? Thanks.

    Found a potential work-around (I think....).
    1. Use the Content Collector tool and select grouped objects
    2. Select Content Placer tool, check "Create Link"
    3. Place grouped object into doc/onto page with Content Placer tool
    4. Copy placed grouped objects
    5. Paste into frame that will be scrollable later
    For now it seems like the link still works

  • View pod menu option disappeared

    Hi,
    I am using TCS 1 RoboHelp 7 HTML.
    I have not found any discussions that address this particular problem and I cannot find anything to help me in Help. All of my pods disappeared as I was working in RoboHelp and my View pod option disappeared in my View menu. I shut down RoboHelp and even rebooted my pc. I then had one pod (Project Manager) visible across the entire screen. After seeing the discussion about Loading the Default Environment, I tried that and it worked. However, I still do not have a View pods option. Does anyone have a suggestion as to why this happened and how to fix it? I also don't see how to lock the pods in place. Very much appreciate suggestions.
    This is what I am seeing:

    Hi there
    You probably need to reset the menu. To reset the menu, right-click the menu area and choose Customize. From the Toolbars tab, select the Menu Bar and click Reset...
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

Maybe you are looking for

  • Help! DVI to VGA Adapter freeze mein Mac

    Hallo, ich have yesterday bought a DVI to VGA Adapter. I connect my Macbookpro 15 to my PC Monitor a NOKIA 446Xpro Multigraph. Everything looks fine, but when everytime my Mac goes to sleep mode and back to activ again it said no Signal and my Mac Fr

  • Photo Stream not uploading unless photos app is open

    I am having issues with Photo Stream. According to Apple-- "On an iOS device, new photos you take will be automatically uploaded to your Photo Stream when you leave the Camera app and are connected to Wi-Fi. Note: Photo Stream does not push photos ov

  • Turn off long headers in Apple Mail

    OS X 10.6.8 Mail is coming in with long headers. View > Message > Long Headers/Default Headers does not change. Any advice?

  • Measuring point difference

    Hi All, Is it possible to get the difference for a measuring point(not counter) when entering the reading every time. regards sunil

  • How do I cancel an itunes magazine subscription

    Please help, I have called Appled (no help) and tried everything I know to get a magazine cancellation on itunes.