Edit lock expression in % change to base

Hi Gurus,
I have done % change to base and approved forecast. I removed the approval by using workflow and in the back end I checked up the value for series consensus forecast approved is 0. But in collaborator workbench stilll the % change to base series is grayed out, meaning I cannot give new override to forecast quantity on future dates. Can some one help to resolve this issue.
Thanks
Ramkri

Hi Ram,
1. Check edit lock expression, based on it ensure the time bucket i.e is it for future or past
2. Plz go and check 'Approval' and 'Final Approval' series as well for that particular time bucket
3. Check also Consensus forecast approval series.
Tks
MJ

Similar Messages

Change to Base in costing sheet

Hi Friends,
If one base ( BA01) is included in 3 costing sheets , now I am chaging to base BA01 fo costing sheet (CS01) and adding 2 activity types , now my question is since BA01 is incuded for 3 costing sheets(CS01/CS02/CS03) so the new actvity types will be added automatically for other two costing sheet bases.
Because bases are controlling area dependent and not specific to costing sheet.
Any pointers, please clarify my doubt.
Regards
Ashu
Edited by: ashutosh p on Jun 7, 2010 6:12 PM

Hi,
yes, thats what it is: "Because bases are controlling area dependent and not specific to costing sheet." So changing one base-definition will affect all costing sheets that use this base-definiton as well.
The only thing is, you enter cost elements (or groups of them) in the base definition, not activity types.
Best regards, Christian

EDIT LOCK in a Z Function Module

I would like to delete the edit lock in a Z Fm.
I check the table TRDIR entries and this FM is not existing there. In TFDIR, it exists though.
Modification assistant is also in disable mode.
How do I remove this?
Thanks,
Kiran

Ok then one last method is there, but i would suggest that still try to find other ways and use it only as last resort, and do discuss with your manager first.
open inlcude program LSEUQF02
go to the subroutine "accp_enqueue_and_corr_check"
put a breakpoint here. and then in debugging temporarily set the value of field suppress_editor_lock_check as X
then you will be able to make the changes.
PLEASE USE THIS METHOD ONLY AFTER CONSULTATION WITH YOUR MANAGER AND AS A LAST RESORT
кu03B1ятu03B9к

I am needing to send a document that can be filled in from drop down fields I have created. After the document is filled and signed I need the form to be locked from further changes

I am in need of help with someone being able to fill in and sign a form in Reader that I created in Adobe Acrobat XI Pro. After that document is sign I need it to be locked from further changes. Can someone please help

Hi Suzette,
Once the document is digitally signed it will not allow further changes.
You might want to check the solution mentioned in the thread: Re: Convert editable PDF to read-only when sent in an email - JavaScript
Regards,
Rave

Impacts of change in Base type of JVRN

HI Team,
As per Requirement i.e Freight on Vat I am change JVRN -Inp VAT w/o Cr Non-C , Base type from 0 to 363, if any impacts Existing Open PO's or any impacts by doing configuration in TAX PROCEDURE. Please explain to me.
Regards
Krishna

Dear Mohit
<b>As per the settings ,generally Change numbers with release key are created for BOM's.
The same T code CC01 is used for this.But in the front page of CC01,the second tab screen is Function,under that you select the radio button for Release key and press enter and as usual give the description,valid from date and change number status as 1 and click on objects and there you inlcude tick marks for the first 3 coloumns against BOM and save that.Eg Change number 500000000 is created
Now using this change number you have created the BOM for material X.in CS01 and saved it.
Now you have decided to change the Base quantity.
in CS02 for material X u have to give the same Change number or else dont give Change number. then only u can change the base quantity otherwise it will be showing as blocked(grey color field).
Now the other case is using CC02,give the change number and press enter,now in the release key field give value 1 and save it.
Now though the key of change number has been released you can not make use of this change number anymore for changing BOM's.
It means that BOM's base quantity cant be changed using this change number or any other change number.the only way is without change number u can change that.
Or else before releasing the change number in CC02,better always change the base quantity of the BOM.
<b>Surely this will help you.
Please reward maximum points and close the thread as answered.</b></b>
Please give a feedback regarding this.
Thanks & Regards
Karthik
Message was edited by:
Karthikraj

Oracle Service Bus 10gR3 - Failed to obtain WLS Edit lock

My question is, how do I release this lock?
The gory details follow ...
Oracle Service Bus 10gR3 on Windows 2003 Enterprise.
I am following Tutorial 1. (Sheesh, I can't even get that right!)
Around page 3-28 - "To test the Routing of the Loan Application ManagerLoanReviewService".
Point 1 says to start the server. Without thinking, I did just that.
The problem is, it was already running, otherwise, I would not have been using the sbconsole to do the editing.
Of course, it detected it was already running and didn't start again.
Problem is, after the server shuts down, the command files shutdown PointBase.
So, after a mistaken startup, I ended up with a server with no database underneath it.
Fine, I restarted it.
Now, using the activate session ("sbconsole/sbconsole.portal?_nfpb=true&_windowLabel=ViewChangesPortlet&ViewChangesPortlet_actionOverride=%2Fchangemgmt%2FSessionActivate&_pageLabel=ChangeManagement&ViewChangesPortletactivate=activate")
I cannot activate my session, as it says the following :-
Failed to obtain WLS Edit lock; it is currently held by user weblogic. This indicates that you have either started a WLS change and forgotten to activate it, or another user is performing WLS changes which have yet to be activated. The WLS Edit lock can be released by logging into WLS console and either releasing the lock or activating the pending WLS changes.
I show outstanding sesssions, there is only one.
I switch to that session.
I still cannot activate this session.
I have tried re-starting the AdminServer.
It talks about releasing the lock in the WLS Admin console. Where? How?
Thanks in advance.
...Lyall
PS. I gave up on this and simply blew the whole lot away and started again (returned to post installation and re-started the entire tutorial). However, it would be useful to know how to fix this properly, if ever I end up in the same scenario again.

Although the Undo all changes might work in some cases, it could be the case that some files still remain and are even the AdminServer could not be started.
The lock files are usually located in the domain directories.
For example
Domain demo:
$BEA_HOME/user_projects/domains/demo/edit.lok or $BEA_HOME/user_projects/domains/demo/weblogic_eval.lck
--olaf

Unable to Start the Weblogic Console, "The domain edit lock error persists"

Hi, I have read a post regarding "The domain edit lock is owned by another session in exclusive mode" error in Weblogic server Using JDeveloper, I am also getting the same error when I ran the JDeveloper, But to change the settings I am Unable to open the Console for WebLogic Server Administration in My System(PC).
"http://127.0.0.1:7001/console" or "http://localhost:7001/console" both are not opening. I have not Installed Weblogic Server separately but I configured My application using JDeveloper. I am getting the above error in JDev Console. I am using the JDeveloper 11g version.
Your Help will be greatly helpful to me.
Thanks,
Srinivas Reddy.

Problem is solved in opening the WebLogic Admin Console... But When I try to deploy the application Some errors Like Validation Failed for Schemas..
this type of messages are coming in red color in admin console.
can any one help on this..?

Changing BEx query - Lock against External Changes

I have BEx query in DEV system.
It was transported to QA system.
Now some changes were made in Cube, Like adding infoobjects.
These infoobjects are to be available in BEX query.
But when the query is opened the following message is getting display
Lock Against External Changes...
BEx transport request 'DV1E756532' is not available or not suitable
After checking details of message
Diagnosis
There are the following possible causes:
No request has been set up as the standard transport request for BEx objects.
The (set up) request 'WD1K917646' (for the package '' ) has already been released.
The (set up) request 'WD1K917646' (for the package '' ) is not of the type 'transportable change request'.
System Response
The request WD1K917646 can not be used to record changes to BEx objects (queries or Excel workbooks). The changes made to objects you are editing will not be logged.
Procedure
If you want to record changes to BEx objects, set up an open transportable change request as the transport request for BEx objects. (If the package '' is not empty, set up a request for this package).
Inform your system administrator of your actions, or enter a new, targeted transport request in the Administrator Workbench in the transport connection by using the 'BEx' pushbutton (Create Transport Requests for BEx).
Procedure for System Administration
How to make changes to query.
Step by Step help needed.

Hi,
I'm also receiving similar error 'BEx transport request is not available or not suitable' when I open a query in development SYSDEV to edit.
This query has been transported to SYSQA but now I need to make some changes so I opened it in SYSDEV but it doesnt allow me to edit.
Do I need to follow the below steps to be able to edit the query in SYSDEV and once done I need to transport the changes/query to QA for validation.
In SYSDEV or SYSQA ?
Step 1) Go to RSA1 Tcode.
Step 2) Click on "Transport Connection" function on the left side pane.
Step 3) Make sure that Grouping is "Only Necessary Objects".
Step 4) Make sure that Collection mode is "Collect Automatically".
Step 5) Collect your query by double clicking on "Selected Objects" which is under "Query Elements"->"Query"->"Selected Objects".
Step 6) On the Right side pane, take a Right Click on the "Query Elements" node and choose "Transport all below".
Note: Make sure that you have not selected any other object other than the objects which are under "Query Elements".
Step 7) Click on the "Transport Objects" ( Truck Icon ) button. Is it Transport Bex button here ?
Step 8) Create a new "Transport Request".
Also below are the steps I used to transport from SYSDEV to SYSQA initially.
Step 1) Go to RSA1 Tcode.
Step 2) Click on "Transport Connection" function on the left side pane.
Step 3) Make sure that Grouping is "Only Necessary Objects".
Step 4) Make sure that Collection mode is "Collect Automatically".
Step 5) Collect your query by double clicking on "Selected Objects" which is under "Query Elements"->"Query"->"Selected Objects".
Step 6) On the Right side pane, take a Right Click on the "Query Elements" node and choose "Transport all below".
Note: Make sure that you have not selected any other object other than the objects which are under "Query Elements".
Step 7) Click on the "Transport Objects" ( Truck Icon ) button.
Step 8) Create a new "Transport Request".
Please advice
Thank you.

While I change the base map I can't see other themes????

Hi,
I use mapviewer for rendering maps, which consist of a base map and some additional themes.
I have a set of base maps (entered in the oracle db) and I'm implementing the functionality of changing the base map, but with the condition that the other themes added above the base map should remain.
The problem that I'm facing is that the basemap changes, but I can't see the other themes.
Following is my code:
public void doChangeBaseMap(String newMap)
String[] enabledThemes = mv.getEnabledThemes();
mv.setAllThemesEnabled(false); //temporarily disable all themes
mv.setBaseMapName(newMap);
try{
mv.run();
catch(Exception ex)
System.out.println("error msg (runMap()): "+ ex.getMessage());
//simply re-enable all themes
mv.enableThemes(enabledThemes);
Any help please?
Best Regards
evanelapi
Message was edited by:
[email protected]

Hi,
currently the method run will render the themes again, but it will use some caching based on how the caching is set to the theme. The default mode is caching="normal", in which not necessarily all features are on the cache at the same time. You can also use caching="all" and in this case all features will be loaded into memory, improving the performance for the next requests.
The next version of MapViewer will come up with some nice new features, and you will have the option to cache the basemaps, resulting on a much better performance as it will not render the basemap themes again.
Joao

Cannot connect 2nd Express as a Remote Base station

When I try to set up a 2nd express it doesn't connect.
I see in the Admin app that it has a "strange" IP address assigned. The Extreme Base station and the 1st Express have addresses like "192.168.9.x" and the new (2nd) Express has a 169.254.X.X and although you can see it in Admin you can't do anything to it.
I configured both the Express Remotes via Admin and use the "Auto config as Remote" feature in the WDS tab via the Extreme Base Station's configuration.
I also have an iMac with a hard-wired iMac connection to the Base Station.
Any ideas? Thanx.

I would do another reset and then configure the second Express manually. To configure the Express you have to be on the same network either with or without a wire.
Here are some steps to try and let us know the results:
- From your wireless laptop run Airport Admin Utility
- Select the Airport Extreme Bas Station (AEBS) and write down its "Airport ID"
- Open the configuration of the AEBS and note the channel number it is on. It should not be on "Automatic"
- Hard reset the 2nd Express
- Connect the Express to your laptop with an ethernet cable
- Both your laptop and the Express should be on the 169.254.x.x ethernet network since no DHCP server is available over their ethernet
- Open the configuration of the 2nd Express which has a name similar to "Airport Base xxxxxx" in Airport Admin Utility
- Change the Base Station name to something like "Express 2" and change the Base Station password so it's not the default "public"
- Leave the wireless mode as "Create a wireless network (Home Router)"
- Change the Network Name, wireless security and channel to match exactly what the other two Airports are set to
- Under the Internet tab change it to "Connect Using: Airport WDS"
- In the "MAC Address:" field enter the Airport ID of the AEBS
- Under the Network tab uncheck "Distribute IP Addresses"
- Under the WDS tab check "Enable this base station as a WDS Remote Base Station" and keep the check mark "Allow wireless clients on this base station"
- In the "Main Airport ID:" field enter the AEBS Airport ID again or click the Select button and pick it from the list (not the 1st Express)
- Under the Music tab set as desired
- Click the Update button finally and wait for it to update
- Disconnect the ethernet cable
- If necessary move the Express to it desired location
Did that help? If the "Auto configure as a WDS remote base station" from the Extreme doesn't work those are the manual steps to apply to an Express!

I just installed iTunes on my computer, where I already have all my music. I went to Edit Preferences Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?

Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.

Airport Express or Airport Extreme Base for home wireless

I've read some of the comparisons between the Airport Express and Airport Extreme Base station to make an informed choice before purchasing. The Airport Express probably will suffice for my needs, plus having AirTunes is a bonus. Mobility is not such a concern (most hotels now offer wireless in any case, making the Express less appealing than when it first came out).
But my only concern with Airport Exress is durability and quality. Some postings on the Apple site note that these can go bad after a year or so. I realize that only those having problems are posting but wondered if there might be some issues with the Express that would make the Extreme Base station a better decision, especially since it's only $30 more now.
Thanks in advance.

Actually it really boils down to your needs.
Either one will work and work well, but if air tunes, and portability is important Express is the way to go. The Extreme is a very good choice as well.
I suggest you look over both of these links and decide the features you need.
http://www.apple.com/airportexpress/
http://www.apple.com/airportextreme/
Good Luck
Don

Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

Hello, I need help with my macbook pro.
It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
I am running Lion 10.7.3.
Regards,
Nicolas.
(I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

You probably won't like this suggestion, but I suggest you reinstall Lion.
First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

Can I edit the rpt file & change the datasource before loading the report?

We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
Thanks

HI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
     // Check the kind of the ReportObject, if it is a subreport
     // proceed. If not skip.
     if(crReportObject.Kind == ReportObjectKind.SubreportObject)
          // Get the SubReport in the form of a ReportDocument
          string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
          ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
          // Use a loop to go through all the tables in the main report
          foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad

Problem with replacement of index series, change of base year

Hi Experts!
I try to explain my problem in Real Estate.
In Italy from January 2011 the baseline (base year) national index of consumer prices for the entire community (NIC) and national consumer price index for families of workers and employees (CPI) moved from 1995 to 2010.
So, I have to change the base year of index in Rent Adjustment.
I think I have changed the base year from 1995 to 2010.
(Path: Real Estate>Rent Adjustment>Index>Replacement of index series, change of base year)
In table TIVAJINDXCON (previous was empty) now there is this record:
SERIESTO: 08000
BASEYEARTO: 1995
SERIESFROM: 08000
BASEYEARFROM: 2010
CHAINDATE: 31.12.2010
INDEXBASETO: 1,373
But with transaction FOA0 it seems that the rent adjustment still consider 1995 as base year instead of 2010.
I have to set the SAP application as to use 2010 as new base year instead of 1995.
Would you please forward me with any support.
Best regards,
Thank you.
Tania

My question has been answered by SAP.

Edit lock expression in % change to base

Similar Messages

Maybe you are looking for