Edit mails through workflow

Hi all,
I am using BO : SOFM and method : COMPOSE in my workflow. The user uses this step to seek clarification for PO or PR. now the user wants to see the reply and also what he has sent previously in workflow itself.
Is there any other method in BO : SOFM that can be used to edit the previously sent object or is there any other BO that serves the same purpose?
Pls let me know as i am not able to execute the method EDIT in Bo : SOFM.
Thanks,
Raj

Hi Raj,
Your requirements are not much clear.
Can you put exactly what you are trying to achive
Thanks,
Charan

Similar Messages

  • Problem in sending mail through workflow

    Hi All,
      I am trying to create a workflow. I created a workflow and once document is made, this workflow trigerrs and i am able to get user decision to my user id. once if i click on approve, mail should be triggered to my mail id. but mail is not coming to my mail id. i checked in SOST transaction, <b>mail status set to Transmitted.</b>, and not as sent .
    But i tested a sample test message from sbwp to my mail id and it is working fine. Only through workflow, sending message to outlook is not working. i checked my user in the system in SU01 transaction also, there also mail id is mentioned. what could be reason for not able to send mails through workflow.?
    Its urgent.
    Points will be awarded to all.
    Regards,
    vinoth

    Hi,
    Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
    thank You

  • HTML E-mail through workflow.

    Hi all,
    Can any one please tell me how we can send an HTML e-mail through workflow.
    The E-mail should be having a link, so that when the user clicks on that link it must take the user to the specified website, say http://www.google.com.
    My Tools version is 8.48 and the application is 8.8.
    I could send the e-mail with a link through sendmail function in peoplecode. But i want it through Workflow.
    Please help me.
    Thank you,
    Bye.

    This is a repeated question in the forum, refer to "http://forums.oracle.com/forums/thread.jspa?threadID=620087&tstart=0" for solution.
    Jayaprakash Tedla

  • Can any one tell me how to attach a pdf file to the mail through workflow

    I have a smart which i am able  to convert it to a pdf file...now.. can any one tell me how to attach a pdf file to the mail through workflow

    Hi,
    To create the task for attachment
    Use the BOR SELFITEM and method NOTES_APPEND.
    The out come of this task contain a link called attachment with a clip attached. Clisk on that icon and choose the type of attachment u want . RAW , EXCEL , TXT , PDF... Then using the import icon u can attach the document u like.
    But the TYPE : OBJ.
    Similarly using NOTE_DISPLAY method u can display the documents u like.
    In any work item u have the facility to attach any atttchment for further circulation .
    Attchment @ WORKITEM
    1.Click the workitem for which you want to create the attchment
    2.Press create attachment
    3. Add the attachment u like (PDF)
    Reward points for useful answer.
    Richard A

  • Purchase Order Smartform as attachment in step mail through workflow

    Whenever user create a PO, mail should trigger in Microsoft Outlook, with the purchase order form as attachment.
    I am able to send mail to Microsoft Outlook whenever PO is created.
    But kindly advice how to attach PO smartform in th mail.
    Regards,
    Rahul.

    Hello,
    Please find below link. There is lot of stuff in google regarding this.
    smartform as work item attachment
    Re: PDF attachment in mail
    Regards.
    Edited by: vikram singh on Jan 30, 2012 2:00 PM

  • How to use variables in the mail text while sending mails through workflows

    Dear All,
                   I had prepared a workflow in which i am sending mail to a administrator if personnel data of any employee is changed.But i want to send the personnel no of employee whose data have been changed.How can i send this personnel no in the mail.
                  Points will be rewarded for useful answer.

    Hi Anand,
    You have the "EmployeeNumber" field in the event container. Pass this into the workflow container by defining a Workflow Container element and subsequently use this container as a variable in your email using insert fields option and you will have the PersonNumber visible in your mail sent to the administrator.
    Regards,
    Karthik

  • PDF in mail through workflow

    Hi,
         There was a workflow already there for PO approval based on the limits.
    Now i need to ater that PO by including a mail triggering of PO in PDF after the approval has been done.
    I dont know what is the work flow they have already for this Approval process.
    I tried with SWELS t.code,But i cant save the PO with Event trace on,Since the mail will be triggered (Before for approaval they have designed this).
    How to find the workflow and how to give this PDF in mail attachment.
    Can cnyone help me in this regards.

    Hi,
    Check the event-linkage configuration SWE2 for object BUS2012 (PO) you may get a workflow from there.
    Then add another task for attach PDF in workflow. Check how to create a task to attach pdf here.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60ff6ad3-729b-2b10-6582-fedc82680a29
    If you just want to create an email. create a custom task and use class cl_bcs to send email with attach ADobe, See this article for more details.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60ff6ad3-729b-2b10-6582-fedc82680a29
    Chaiphon

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • How to send E-Mail Notification executing through workflow?

    hi All
    I want to send E-Mail Notification executing through workflow in MDM Data Manager?
    I have tried it, But still i am unable to send E-Mail Notification?
    i will explain, how i have tried?
    1) I have created the simple workflow with the following components
        they are in sequence
          start--> process-> notify--->stop
    2)  owner of the workflow is Admin and launcher of the workflow is Admin and i have given email id to the Default Admin user in the console.
    3) i have created another user (i.e. User2) with default roles as like as Admin and i have assigned User2 to the process component in workflow and I have created e-mail address for the User2 in the console.
    4) i have created another user(i.e.User1) with default roles as like as Admin. and give e-mail address,under the notify component User1 is selected in To Field.
    5) stop component as usual
    coming to configuration part about the SMPT server in MDS.ini file
    1) in mds.ini file for the MailServer=, I have given SMTP Server name once and restarted the server and executed the workflow, but not worked
    2)in mds.ini file for the MailServer=, i have given SMTP Server IP Address and checked the port,and we have configured the host file also and restarted the server and executed the worflow , but not worked
    In all the ways i have executed and tried to send E-Mail Notifications through workflow, But I didn't
    can any one help where i have went wrong, so i can rectify  it
    what actually we have to give in mds.ini file? is any other cofiguration required for it?
    if any one have any solution for it , can you please explain me in step by step
    Thanks in Advance
    bharat.chinthapatla

    Hi Bharat,
    your steps seems to be correct. Just try to ping your mail server, to verify if your mail server is running up, besides note that mdm go throw port 25 for sending emails, so please check if you are able to send emails using port 25 in your network.
    Regards,
    Vito

  • Change in sender name of mail sended through workflow

    Hi All,
    I have requirement where we want to chage the sender name decription for mails which are going through workflow.When we send mails through send mail step in workflow it is taking sender decription name automatically as "GSAP E1B WORKFLOW SYSTEM".
    I have to change this decription to "OSIRIS Invoice". Is there any way to change sender name?
    We are using SENDTASKDESCRIPTION method of SELFITEM object in send mail step.
    Any help on this regards will be grate help...
    Regards,
    Rahul

    Hello Rahul,
    here, the sender's name is the user's name of the background user performing this task, i.e. usually WF-BATCH.
    If you do not have any other workflow scenarios running that could interfere here you could possibly just change that user's name.
    Otherwise you have to re-program the sendmail step to specifically set the sender description.
    Best regards,
    Florin
    P.S: Workflow issues have a separate forum:
    SAP Business Workflow

  • How to Send mail woth pdf attachment through workflow

    Hi SDNer's,
           I have a problem with pdf attachment through workflow. Please anybody help me to get solve my issue.

    Hi Suresh,
    I just tried this thing in my systtem and it is working... BADI is trigerred everytime there is a change in the PO... even when you release there is a change in the PO so this BADI will be triggerred....
    I suggest you should implement BADI in your dev system and place a break point in the POST method...
    After that create a PO and release it using ME29N... thereafter when you save the PO... this method will trigger and you will have access to PO details...
    PS: Remember this BADI wont work for transaction ME29...
    Regards
    Gautam

  • How to send a mail in workflow keeping 1 receiver in CC and the other in TO

    Hi,
    Can anybody tell me how to send a mail in workflow keeping 1 receiver in CC and the other in TO.
    I need to send a mail to an employee keeping his/her manager in CC through workflow.
    Regards,
    Lavanya

    Hi Lavanya,
    I dont think its possible using Send mail step type.
    But it can be done by using the FM SO_NEW_DOCUMENT_SEND_API1. Just create a method and Call this FM accordingly.
    Thanks,
    Viji.

  • Problem in sending mail through dynamics actions

    Hi Friends,
    I have a problem in sending mail through dynamics actions . In this  we pass a subroutine in dynamics actions which send an mail when promotion action occured.
    Problem is that sometimes it will  send an mail or sometimes not. I have no idea to solve this problem.
    Can anyone suggest me .
    Thanks ,
    Anish
    Moderator message : Duplicate post locked.
    Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

    Hi,
    Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
    thank You

  • How to send Html Mail through navigateToUrl() with contentType "text/html" for Android ?

    Isn't it possible to send Html Mail through navigateToUrl() with contentType "text/html" for Android ? please suggest any workaround
    Thanks

    AHHHH
    What you can do to make HTML for Apple Mail is to make it in an HTML editor, open it with Safari use CMD+i - a new mail message will appear in a moment with the web page in the email body.
    You can't do any major editing in Mail, you'll have to go back to the HTML file. But it works.
    You can also use Copy (from a web page) and then (Edit) Paste as HTML (that what Paste as HTML is for, not for creating HTML email). You can also user Paste as HTML to copy/paste a HTML email you receive or part of a HTML email.

  • Problem while sending mail through posprocess event hadler  inOIM 11g r2

    Hi,
    i am sending mail through posprocess event hadler inOIM 11g r2 when user is created.But i am getting following error in resolver class.
    java.lang.NullPointerException
    at oracle.iam.identity.usermgmt.impl.UserDetailsProviderImpl.getUserDetails(UserDetailsProviderImpl.java:102)
    at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
    at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
    at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at oracle.iam.notification.impl.util.NotificationUtil.getUserPreferences(NotificationUtil.java:83)
    at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:523)
    at oracle.iam.notification.impl.NotificationServiceImpl.notify(NotificationServiceImpl.java:271)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    Edited by: 853559 on Sep 25, 2012 6:27 AM

    If you are using Custom Notification XML, make sure to have StaticData element in it. StaticData defines the entitites that can be used in the notification template, and these entities attributes are used to define substitution tokens in the template.

Maybe you are looking for