Edit Mask Missing

Using a standard keynote theme and master, it had been that when I inserted a picture into a photo cutout, if I clicked on the photo a box came up allowing me to edit the mask. It had a slider bar and the photo could be made larger or smaller using the slider. I haven't made any preference changes, etc, but this behavior is missing. Is this a controllable feature? I can't find this particular feature mentioned in the help materials.
I did try reapplying the theme and the behavior is back, but I'm trying to figure out what would cause it to go missing in the first place.
Message was edited by: ProfT

The letter T is a shortcut to toggel on/off the Tool bar

Similar Messages

EDIT MASK with ALVGRID

Hi,
i need to display a number in ALV GRID with this format:
+/- ###.###,##
fo example:
1.000.000,000 = 1.000.000,000
1.000.000,000 - = -1.000.000,000
How can i solve?

Hi Salvatore,
Check this sample code for edit mask with ALV :
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/33/206bc8012e11d3b495006094192fe3/content.htm
Regards,
Chandra Sekhar

MAX Reports-Initialization Error, Editing Components missing?

Using a NI PXI-1042Q and an 4472B Daq card to capture data. Running LabVIEW 8.2 on a Windows XP system. The program controls an MID7604 which controls a motor. Using a program that was written and is now an executable. To run the program minor file related inputs are required, the motor moves to calibrate its' position, then a test piece is requested to be adjusted. After the adjustment, file request information is acknowledged (location for data to be placed is ok'd).
After pressing OK, the following error message is generated:
[ ERROR-200428 occurred at DAQmx Start Task.vi, Possible reasons: Value passed to the Task/Channels In control is invalid. The value must refer to a valid task or valid virtual channels, Then it identifies the Task Name: __________.]
This of course refers to the Task/Channels IN input of the DAQmx Start Task.vi, which points to the task that was setup, not being setup properly or not there. In our case, it was there and has somehow been removed.
When going to MAX and trying to setup a new Task: Data Neighborhood --> Right Click --> Create New NI DAQmx Task,
the following message is generated:
!INITIALIZATION ERROR
Some components required for editing are missing. Please contact National Instruments for more information.
We have already viewed the NI-DAQmx Error-200428 message, and also tried the "How Do I Recover From MAX Database Corruption?" procedure, no change.
Please respond. Thanks.

Typically with an executable you only have the run-time versions and I don't think you can create a task with just the run-time. Somehow the hardware configuration has been corrupted. If you can find the original .nce file that was used on the development system, you can just import that I believe. Otherwise, you may have to install full versions of DAQmx.
The reliance of existing tasks in MAX is one reason that I avoid them and create everything in the LabVIEW program. Just one thing to keep in mind.

Why is the "basic" edit option missing from the develop module?

why is the "basic" edit option missing from the develop module?

http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

Edit masking in smartform ??

Hi all,
is it possible to use edit masking in smarts for date.
if yes, pls give some code sample for the same.
regards,
kishan.

Hi,
You can add Program Lines to the smartform node before displaying the field and format it using edit mask as in normal programs and display the variable in the smartforms.
Regards,
Himanshu

No editing mask exists

Hi,
This is my first project.
After I create my WBS and click the drive structure -> check, the system show No editing mask exists.
I reviewed all the parameters of the project and didn't find any place to setup this editing mask parameter.
How can I fix this problem?
Best Regards,
John Hu

Hung Fa Hu wrote:
>
> In Fact, I don't know how these settings apply to my Project.
> I even don't know which project coding mask apply to my project.
>
>
Please read SAP Help and understand the concept of Project Coding Mask..!
You can access the IMG help from the following path..
SAP Help Portal >> access SAP Help for 4.6C >>> Implementation Guide >>> Project System >>> Structures >>> Operative Structures >>> Work Breakdown Structure (WBS) >>> Project Coding Mask...
.... Define Special Characters for Projects
......Define Project Coding Mask
After the above please come back with a specific query.. if any

Regarding edit mask

Hi...
good evening.
he asked,Is it possible to modify report values dynamically.
suppose i retrieve po as 10000.now i want to modify that as 1200.this happens
only for output but not for database table.
how you do this?
i said using edit mask we can do this.But he asked me complete syntax.
please provide comple syntax regarding the above requierement.
thanks and regards,
k.swaminth reddy

Plz explain your scenarios in detail

Can anyone get the parameter Edit mask ' ' to work in 11.2

As I remember it, and the documentation seems to agree, By placing a '<' in an the parameter's edit mask, should cause the characters entered for the parameter to be converted to lower case. It is returning an error if the characters are not entered as lower case. I just want them converted.
I am trying to have parameter values in lowercase before evaluating them in selection criteria.

Hi Janelle,
The edit mask is working.
The edit mask doesn't change the entered value. It restricts it to the value of
the edit mask.
You want to change what the user enters in a different location, like in a formula.
If Not IsNull(?EnteredValue) and (?EnterValue) Not Equal "" Then
LowerCase (?EnterValue) etc.
Hope this helps,
The Panda

ALV Edit Mask isn't applied when exporting as "Spread Sheet".

Hi all,
One of our program has "Edit Mask" as XXXXX____ for displaying data in ALV (Mask first 5 numbers as X, display last 4 numbers as it is). However, when data is exported as "Spread Sheet", the edit mask is not applied. Does anyone know how to force edit mask when data is exported as SpreadSheet (MHTML)? If you export as "local File" and then do "SpreadSheet", the edit mask works.. it is just when the direct "SpreadSheet" done, it doesn't work.
(i.e. CL_GUI_ALV_GRID->EXPORT_TO_SPREAD_SHEET doesn't apply EDIT Masks set in Field Catalog.)
Here is more technical info. We are on ECC 6.
Field Catalog is of type LVC_T_FCAT.
for a specific field, "EDIT_MASK" is set to XXXXX____.
The ALV is called using
My_ALV_CLASS->SET_TABLE_FOR_FIRST_DISPLAY
exporting
is_layout = My_layout
is_toolbar_excluding = my_toolbar_exclude
changing
it_outtab = My_data_table
it_fieldcatalog = MY_FIELD_CATALOG_DEFINATION_WHERE_EDIT_MASK_IS_SET
exceptions...
Thanks in advance!

Hello,
This is first time I am giving an answer.
Instead of using a function module to merge the field catalog, try doing it one by one.
for example,
pt_fieldcat-col_pos = 01.
pt_fieldcat-fieldname = 'KUNNR'.
APPEND pt_fieldcat.
pt_fieldcat-col_pos = 02.
pt_fieldcat-fieldname = 'IP'.
pt_fieldcat-edit = 'X'.
pt_fieldcat-edit_mask = '-.-.-.-'.
APPEND pt_fieldcat.
and use the structure Z_IPADDR in method parameters instead of a function.
CALL METHOD go_grid_ip->set_table_for_first_display
EXPORTING
     i_structure_name = 'Z_IPADDR'
     it_toolbar_excluding = lt_exclude
     is_layout = ls_layout
CHANGING
     it_fieldcatalog = pt_fieldcat
     it_outtab = p_t_auth_ip.
CALL METHOD go_grid_ip->set_ready_for_input
EXPORTING
i_ready_for_input = 1.
and also you can use following function module to check if the edited value is still in ALV or not
CALL METHOD grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid IS NOT INITIAL.
then the edited data in alv is successfully changed in internal table behind that.
Debugging may find you an answer.
Kind Regards,
Manisha

Grad Filter Edit option missing (3.5?)

After Loading the 3.5 RC I noticed when I use Grad Filters I do not see any of the guide lines or selection dots anymore.
It lets me apply a Grad Filter and I see the effect, but once I move out of the that specific filter I cannot go back and select it to edit or delete. I can remove it by resetting all Grads.
I noticed this after loading 3.5, but I'm hoping it is something else since I haven't seen anyone else bring this up.
Any ideas?

I figured it was something that simple. Thanks
> Date: Tue, 13 Sep 2011 18:10:38 -0600
From: [email protected]
To: [email protected]
Subject: Grad Filter Edit option missing (3.5?)
Hit "H" (Hide).
>

Edit Mask in ALV add $ sign

Hello
Does any one know how to add the "$" sign to costing numbers in an ALV grid? I tried using Edit_Mask in the field catalog table but doesn't seem to work. I have a number 9,380,568 and I would like it to be displayed as $9,380,568 on the ALV Grid. Do I use an EDIT_MASK to do this and should it be gs_fc-edit_mask = '$_,___,___'? I tried this and does not work for me. If I have a zero cost quantity how do I show blanks, do not want the "$" to be displayed if I am using an Edit Mask?
THANKS

Hi LydiaMM,
Try this : -
DATA TIME TYPE T VALUE '154633'.
WRITE (8) TIME USING EDIT MASK '__:__:__'. "Output: 15:46:33
or
write sy-datum using edit mask '__/__/____' to sydatum.
or
incude a character field of length 10 in your final internal table.
data: wrk_date(10) .
then in the loop.. endloop of the final internal table
suppose sy-datum is varibale which need conversion.
USE THE BELOW CODE FOR CONVERSION.
WRITE sy-datum TO wrk_date USING EDIT MASK '__.__.____' .
Regards,
Kittu

Projects/WBS elements with the editing mask A still exist.

Hi All,
I am trying to create a New Coding Mask with Project ID "A" in Dev client 100. ( Ex: A.0000.XX)
But System is giving an error says that"There are still projects or WBS elements with edit mask A in the system. Therefore you cannot change them".
But there is no WBS or PD's with this coding mask existing in development client 100.What to do?Is there anyone faced this problam earlier?Any refresh activity required for this?
Thanks in Advance!
Thanks
Suresh Kumar.

Hello,
You need to check whether there are any projects in the system starting with "A" using CNS41. If at all there are any project existing in the system which starts with "A" then the system wont allow to create coding mask which starts with "A"
You can try to delete these project if possible and then try out if the system allows you to create the coding mask.
Thanks and Regards,
Anish

Yahoo Mail works fine on I.E., but on Firefox formatting is missing, only have attachment button & all apps such as photo edit are missing.

'''''All I can do is send a Blk & Wht email with preset font and size. Also, ALL, 100% of the apps below the left column of folders are missing. Large files, photo editing, stationary etc. In fact the scroll stops at the bottom of the list of folders. I have contacted Yahoo, a fix was tried but there is no change. Yahoo says since my mail works correctly on Internet Explorer, I should contact Firefox. Also, my Yahoo color theme will not hold my selection. Every time I go to mail on Firefox the theme has defaulted back to it's hard to see colors.'''''

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"

File + Edit menus missing from PSE9 trial version

I installed the trial version of PSE9 and am having a fundamental problem with the Organizer. Various functions require me to access File or Edit menus which, according to the Help file, should be at the top of the screen but they are nowhere to be found.
For example, I want to Move files offline to a CD or DVD. To do that - according to the Help facility - I have to start by clicking on File - Move, but nowhere can I find this "File".
Does anyone here know whether these menus are missing from the trial version of the Organizer ? Or are they hidden somewhere ?

Thanks very much.
When forwarding this to the product management you might mention that this problem was encountered on a Window 7 Ultimate 64-bit system. I mention this because I have discovered the the "Ultimate" and 64-bit versions sometimes behave significantly differently from the other versions of Windows 7. In particular, some of my recently-purchased software has been unable to deal with the 64-bits, possibly because parts of them were written 10 years ago albeit purchased recently.

Edit option missing from SOME photos

Several of my iPhone pictures on the camera roll do NOT have the edit option available. Most of them do, but several do not. I noticed that the pictures that do not have the edit option anymore are photos that I have already edited at least once in the past. Any idea why the edit option is all of a sudden missing from those photos, but is not missing from others?

http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

Edit Mask Missing

Similar Messages

Maybe you are looking for