Edit Mode to Scene on Timeline

When I first went through tutorials, I had the buttons along
the top of my Timeline to switch back and forth between edit modes
and scene. They're gone and I have to do a frustrating work around
from movie clips to my scene 1.
At one point, I was getting an error message indicated some
scripts maybe slowing down performance. So once I deleted the
script.
Is this what the problem is? What do I do to get edit mode
and scene buttons back on my timeline?

Windows > Toolbars > Edit Bar
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
newTween wrote:
> When I first went through tutorials, I had the buttons
along the top of my
> Timeline to switch back and forth between edit modes and
scene. They're gone
> and I have to do a frustrating work around from movie
clips to my scene 1.
>
> At one point, I was getting an error message indicated
some scripts maybe
> slowing down performance. So once I deleted the script.
>
> Is this what the problem is? What do I do to get edit
mode and scene buttons
> back on my timeline?
>
>
>

Similar Messages

Text Caption appears in Edit Mode but not in Preview Project or Web Browser

I'm using Cp4 and have downloaded Adobe Flash 10 Active X, it's ver 10.1.82.76. I've added a simple text caption with these options:
Timing Display: Rest of slide
Appear after: 2.0 seconds
Transition effect: Fade in only
In: .5 seconds
And Visible is checked
I also have a simple line that I drew with the draw line tool and included an arrow on the end of it.
Everything on the screen works including the click box, the animated text and the failure caption. For some reason the text caption and the arrow are not appearing except in Edit Mode. In Preview Project, they disapper but the click box, failure caption and animated text work fine.
I've rebooted, copied this screen into a new instance of Cp4, re-created these objects on a freshly recorded screen, chosen Order: Bring to Front, created a brand new screen completely from scratch and downloaded the Flash 10 Active X version mentioned above.
They funny thing is, is that the text caption and arrow works fine on other screens in the project. I have 76 screens total.
I'm running Windows XP.
Any suggestions?

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Upload functin works in Edit mode but not in View mode

I am using the Oracle AS 10g PDK to integrate struts application into Portal. I found the upload function works fine in portlet edit mode, but it doesn't work in view mode (Go to the "The page cannot be found" and URL is "http://servername/portal/page"). Does anybody know the reason.

Hi there
Can you post a screen capture of what your Timeline looks like?
Odds are your Click Box is pausing in a weird place.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Any way to change speed of a clip in "over-write edit" mode?

I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Sequencing Screen Captures in Edit Mode

I've used Camtasia alot and am transitioning to Captivate. To
test recording and editing in Captivate, I recorded one minute of
screen activity to simulate capturing an application demo. When I
end the recording, it converts the recording to thumbnails and puts
them in Storyboard mode but also chunks it into slides that I can
not sequence in Edit Mode. I get 10 seconds chunks and I can't
figure out how to put them together to make one sequence. Do I have
a wrong setting? Any help is greatly appreciated.

Hi Jennifer and welcome to our community
This isn't intended to slam or highlight either product, only
to point out differences.
Camtasia captures full motion from the onset. Captivate
captures individual screen shots and places them on slides.
Captivate does do full motion capture, but it's not intended to be
used like Camtasia's is. For example, you would never want to
surround Windows Media Player using Captivate and record a five
minute video. But you could do this with Camtasia. (copyrights
notwithstanding)
Camtasia allows text captions, but you have to add them after
the fact. Captivate can add these things automatically. Captivate
wins with these hands down, as there is more variety and they look
more polished and professional.
Captivate has only two different output types. .SWF and .EXE.
Camtasia offers a wider selection. Including .FLV (Flash Video) ,
.AVI (Audio/Video Interleave, .WMV (Windows Media), .QT
(QuickTime), .RM (RealMedia).
The Camtasia Timeline represents the entire project.
Captivate's Timeline is per slide.
Camtasia has some neat transitions you may use, but you have
to split the movie manually and it takes a bit of getting used to.
Captivate has a few transitions for slides, but the process seems
more intuitive. At least to me.
Captivate offers three "levels" of audio. Background track,
Slide and Object. Camtasia essentially has two and seems a bit
rigid as opposed to Captivate.
Both products offer quizzing functionality. However,
Captivate's seems more robust and easier to use. At least it does
to me.
Both products record the screen, but as near as I can tell,
Camtasia is unable to record like Captivate does, where you end up
with a simulation. You may certainly add Flash hotspots later, but
Captivate does it for you.
Those are just a few differences I noted. There are many
more. Hopefully this helps give you an idea. Personally, while both
products do essentially the same thing (record the screen) I easily
see a need to have both.
Hopefully this was helpful... Rick

Assign focus on text field associated with tree item in edit mode

The JavaFX home page has an example for how to edit the label associated with a tree item using a cell factory (see sample code below). However, if you select a tree item and then either mouse click or select the Enter key to start editing, the text field doesn't get focus even though the startEdit() method invokes textField.selectAll(). I tried invoking textField.requestFocus(), but that didn't work. Is there a way to ensure that the text field gets focus when the tree item is in edit mode?
I'm using JavaFX 2.1 GA version on Windows 7.
Thanks.
Stefan
@Override
public void startEdit() {
super.startEdit();
if (textField == null) {
createTextField();
setText(null);
setGraphic(textField);
textField.selectAll();
public class TreeViewSample extends Application {
private final Node rootIcon =
new ImageView(new Image(getClass().getResourceAsStream("root.png")));
private final Image depIcon =
new Image(getClass().getResourceAsStream("department.png"));
List<Employee> employees = Arrays.<Employee>asList(
new Employee("Ethan Williams", "Sales Department"),
new Employee("Emma Jones", "Sales Department"),
new Employee("Michael Brown", "Sales Department"),
new Employee("Anna Black", "Sales Department"),
new Employee("Rodger York", "Sales Department"),
new Employee("Susan Collins", "Sales Department"),
new Employee("Mike Graham", "IT Support"),
new Employee("Judy Mayer", "IT Support"),
new Employee("Gregory Smith", "IT Support"),
new Employee("Jacob Smith", "Accounts Department"),
new Employee("Isabella Johnson", "Accounts Department"));
TreeItem<String> rootNode =
new TreeItem<String>("MyCompany Human Resources", rootIcon);
public static void main(String[] args) {
Application.launch(args);
@Override
public void start(Stage stage) {
rootNode.setExpanded(true);
for (Employee employee : employees) {
TreeItem<String> empLeaf = new TreeItem<String>(employee.getName());
boolean found = false;
for (TreeItem<String> depNode : rootNode.getChildren()) {
if (depNode.getValue().contentEquals(employee.getDepartment())){
depNode.getChildren().add(empLeaf);
found = true;
break;
if (!found) {
TreeItem<String> depNode = new TreeItem<String>(
employee.getDepartment(),
new ImageView(depIcon)
rootNode.getChildren().add(depNode);
depNode.getChildren().add(empLeaf);
stage.setTitle("Tree View Sample");
VBox box = new VBox();
final Scene scene = new Scene(box, 400, 300);
scene.setFill(Color.LIGHTGRAY);
TreeView<String> treeView = new TreeView<String>(rootNode);
treeView.setEditable(true);
treeView.setCellFactory(new Callback<TreeView<String>,TreeCell<String>>(){
@Override
public TreeCell<String> call(TreeView<String> p) {
return new TextFieldTreeCellImpl();
box.getChildren().add(treeView);
stage.setScene(scene);
stage.show();
private final class TextFieldTreeCellImpl extends TreeCell<String> {
private TextField textField;
public TextFieldTreeCellImpl() {
@Override
public void startEdit() {
super.startEdit();
if (textField == null) {
createTextField();
setText(null);
setGraphic(textField);
textField.selectAll();
@Override
public void cancelEdit() {
super.cancelEdit();
setText((String) getItem());
setGraphic(getTreeItem().getGraphic());
@Override
public void updateItem(String item, boolean empty) {
super.updateItem(item, empty);
if (empty) {
setText(null);
setGraphic(null);
} else {
if (isEditing()) {
if (textField != null) {
textField.setText(getString());
setText(null);
setGraphic(textField);
} else {
setText(getString());
setGraphic(getTreeItem().getGraphic());
private void createTextField() {
textField = new TextField(getString());
textField.setOnKeyReleased(new EventHandler<KeyEvent>() {
@Override
public void handle(KeyEvent t) {
if (t.getCode() == KeyCode.ENTER) {
commitEdit(textField.getText());
} else if (t.getCode() == KeyCode.ESCAPE) {
cancelEdit();
private String getString() {
return getItem() == null ? "" : getItem().toString();
public static class Employee {
private final SimpleStringProperty name;
private final SimpleStringProperty department;
private Employee(String name, String department) {
this.name = new SimpleStringProperty(name);
this.department = new SimpleStringProperty(department);
public String getName() {
return name.get();
public void setName(String fName) {
name.set(fName);
public String getDepartment() {
return department.get();
public void setDepartment(String fName) {
department.set(fName);
Edited by: 882590 on May 22, 2012 8:24 AM
Edited by: 882590 on May 22, 2012 8:24 AM

When you click on a selected tree item to start the edit process is the text in the text field selected? In my case the text is not selected and the focus is not on the text field so I have to click in the text field before I can make a change, which makes it seem as if the method call textfield.selectAll() is ignored or something else gets focus after method startEdit() executes.

Adobe Premiere Pro CS3 "The editing mode used by this project could not be loaded."

Hello-
I am encountering an issue with my Adobe Premier Pro CS3. I am trying to open up a project that another person has created on a different editing system. When I try to open, it comes up with the error "The editing mode used by this project could not be loaded. The project will be opened in Desktop mode." The next window is a Windows Explorer screen, that wants me to choose a file to open. If I cancel that, it brings up a blank looking project with no timeline or anything?
A quick comparison of systems:
Mine:
HP dc7700s desktop
Windows XP OS
Adobe Master Collection CS3
Hers:
IBM compatible laptop
Microsoft Vista
Adobe Premiere Pro CS3
Adobe Photoshop CS3
I have googled the error message, but have not found anything to fix this. I have also verified from Help - About that we have the exact same versions of Adobe Premiere Pro CS3 installed.
I need to be able to view this project on either computer. Any advice would be greatly appreciated!!!
Thank you!

>project will be opened in Desktop mode
I have never used any non-standard files, but from reading here, desktop mode is used when the video files are not standard... in one way or another, but usually pixel dimensions
What is the codec and properties of the files in that project?
Are you sure they are 100% standard?

Is it possible to break an edit into small scenes, and then sew them together, but without losing quality by using the 'publish and share' options?

Is it possible to break an edit into small scenes, and then sew them together, but without losing quality by using the 'publish and share' options?

redflashred
What is important here is that you know the properties of your source file(s), set the project preset to match the properties of those source files, and then export with settings as close as possible to the original. Often you can do this without noticing quality differences in the export.
I am understanding and defining your issue as you wanting to maintain the quality of the original imported files in the export. If that is the case, the please supply the following, and I will give you a step by step
a. What are the properties of your source files (including bitrate). Here I am looking for
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
file extension
A quick way to get that type of information is knowing the brand/model/settings for the camera that recorded the video.
2. Based on that information we can set manually a project preset to match those source property.
3. When we go to export...example Publish+Share/Computer/ and your choice and its preset, we can customize the preset selected
under the Advanced Button/Video Tab and Audio Tab of that preset in order to try for the best possible match between the properties of the
original file and the properties of the export.
But, please let us know if you also need help in trimming the original import at the Timeline level prior to export.
Your mention of Publish+Share suggest that you are working with Premiere Elements 11, 12, or 13. What is the computer operating system?
Thanks.
ATR

Effects lock up in Edit mode

Hello,
I'm sifting my way through Audition 3. When I put an Audio Clip in the Edit mode of Audition and then add an Effect I get the following:
1. The Effect will be added and it will properly Preview. I will STOP the Preview (I have waited as long as 5 seconds after stopping) - and then click on "OK" to add (render) the effect. Audition will immediately lock up. NOTHING will be available. I then have to open the Task Manager and close Audition.
2. If I re-open Audition it will work again. The Effect will not have rendered though.
3. Also, if I Preview the effect and then "Cancel" (as opposed to "OK") Audition will continue to function. So, the problem seems to when the Effect is to be rendered.
4. I tried all four of the computers available in the facility and they all did the same thing. So, I doubt it is anything specific to the computer used.
Thank you for any help, Tom

The OS is XP service pack 3. Computers are Pentium 4 about 2.4 gig with 2 gig of RAM.
The clips is very small. About 5-10 seconds of a single wav. file. It is the only clip I have imported, so otherwise the bin is empty save for this one small clip. Nothing is in the Multitrack Timeline. Certainly not a taxed system - under the circumstances.
No, this is not on a network. I have yet to check the temporary files location, but it likely is wherever Audition defaults it to.
I doubt the temp file is running out of space, the drive is less than half full and the install of Audition is new. It occurs in a fesh session with only one clip imported.
These are stand alone computers not on the network. Note, I also have this problem on my laptop (that would have the problem on 5 computers now).
It seems like maybe I am doing something wrong??? - I will Import a file (from the Audition "Classroom in a book" CD) in the Multi Track view. Note, the file is place on the harddrive, not sources from the slower CD. I then double click on it (in the bin) to open in the Edit view. I will double click on the Effect (Echo for instance) to add it. I will Preview the Effect and it plays promptly and properly. I will stop the Previewing of the Effect, - or let it play all the way through. I have waited at least 5 seconds after the Preview stops. - - - I then click on "OK" to render the Effect and Audition locks up every time with every effect I have tried.
I just did some more testing. If I don't Preview (play the clip with the Echo) and just click on "OK" to render the clip, it does not seem to lock up. It renders correctly in seconds. So, what is it about the Previewing of the Effect that causes the lock up??? It is not locking up on the Preview, but only on render after I Preview. I can't imagine it is still processing the Preview if I play it to the end before clicking "OK" to render.
Thanks, Tom

Can't open photos in edit mode

I can;t open photos in edit mode in iPhoto '08. When I double click on a photo the main window remains blank (no "!" no"?"). This problem occurs with every photo in the library. My permissions are OK. I've also tried setting the preferences to edit in Photoshop but double clicking on the photos then still accomplishes nothing.

Steve:
Do you get a blank white window in the edit mode? If so that may mean you do not have access to the files. Try the following:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field.
FYI:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Can't view photos in edit mode

Hello,
I just upgraded to iPhoto '08, and while I can view all my thumbnails ok, the photos themselves won't load at all in edit mode.
I was using iPhoto to try to"jumpstart" my iWeb (per my other help request in another topic) when I noticed this.
I have Leopard 10.5.2, iPhoto 7.1.2 and a 1.8 GHz processor and 512 MB RAM in my upgraded G4 tower. I tried deleting the preferences file, rebuilding the library file, opening in another account, etc, with no luck. I had even just erased my hard drive and cleanly re-installed Leopard, etc. with still the same problems in both apps. Do I just need to add more memory perhaps? I can't think of anything else...?Does Leopard require much more memory than Panther (which I had before) to run properly?
Thanks,
Paul

I've had the what sounds like the exact same problem with iPhoto '08. I, too, have an upgraded 1.8 GHz G4 (AGP Graphics) running OS 10.5.3 (although the original installation was 10.5.1 and the same problem occurred before the software updates). When I try to edit a photo, the edit window opens but no picture appears. Clicking on the various editing tools and manipulating them (blindly, on a blank screen) shows that editing is actually taking place, and that changes can be saved.
An earlier post of mine concerned the first problem I noticed since my OS and processor updates; namely, that the DVD player app won't work, but instead returns an error message saying that a valid device could not be found for playback. Several responses to that post seemed to suggest that the ATI Rage 128 video card might be the culprit and that it would need to be replaced. In the past week I've been on the phone or in email contact with tech support people at ATI, Sonnet, Other World Computing, and Apple, the last being the least knowledgeable of all of them, I'm sorry to say.
The Sonnet guy personally runs a computer just like mine, but with the ATI Radeon 9800 Pro Mac video card. That item costs $209 at OWC. But ATI says it won't work because of the G4's 200 power supply.
These folks think that the iPhoto problem would be solved by the new video card -- but I'm not yet convinced I want to spend that kind of money to find out. Most also say that the DVD Player issue would be fixed, although the OWC guy says it has nothing to do with it.
So we're going blind here, with much conflicting expert opinion. I'll keep watching for further discussion.
cc

Unable to open a view in edit mode

Hi All,
I have a Notes assignment block in the Account Overview page. It contains a text area and an EDIT button to modify the notes. Corresponding view and context node for this block are BP_DATA/NOTES and NOTES respectively. Notes context node is bound to Text context node of the component controller.
The issue is, when agent confirms an account, goes to Overview page and clicks on EDIT button of the Notes block, then, if the block already has some text, then it turns in to EDIT mode. But if Notes section is empty initially, then, on click of EDIT button will not make the view editable.
During debugging, I can see that if notes section is already filled with some text, then there is an entity in the collection wrapper of the NOTES context node(also in the component controller collection wrapper). But if notes section is initially empty, then collection wrapper is empty(both view and component controller context nodes).
My requirement is to make the notes section editable even if there is no text present in it initially. It will be very helpful if someone could give me suggestions on this issue.
Thanks and Regards,
Naren

Hi Nitish,
Thanks for your reply. Infact I only coded the event handler. In the first line, I am reading the entity from the collection wrapper of the context node. If it is bound, only then I can set it in EDIT mode.
ob_entity ?= me->typed_context->notes->collection_wrapper->get_current( ).
IF ob_entity IS BOUND.
Sets the view in EDIT mode
Now, ob_entity is null if there is initially no data in the notes section of the confirmed account. However, if notes is not empty, then, ob_entity is bound and I can set the view to edit mode. This is the issue.
Regards,
Naren

How can I open an email file in edition mode?

Hi!
I use a system here in my company that generates an automatic email and prepare it to be sent.
We were using MS Outlook and we have migrated to thunderbird for lots of reasons.
But since it has migrated, the system cannot generate this email in the composition screen.
It generates in the inbox.
Is there anything I can do to change this?
I have made a few tests and I realize that the same thing happens if I save an email file in my computer and
try to open if with the thunderbird. It's supposed to open in edition mode, so the user can send it out, with just one click.
Thank you!

https://support.mozilla.org/en-US/questions/1004680

Ctrl+tab is not working in editing mode

I have JcheckBox and JTable in my JPanel. When user clicks or presses F2 to edit any cell value of the JTable a comboBox will appear with possible values. (This comboBox is coming from table CellEditor). When user presses ctrl+tab from the table focus should transfer to JComboBox all time. It is working only when the user presses ctrl+tab from the table cell which is not in editing mode. If the user presses ctrl+tab from the table cell which is in editing mode (i.e. focus is on the ComboBox of the cellEditor) it does not work. Please help me to find the solution.
I give a sample code here for your reference.
public class Frame1 extends JFrame {
public Frame1()
super();
this.setLayout( null );
this.setSize( new Dimension(400, 300) );
JTextField ch = new JTextField();
ch.setVisible(true);
ch.setBounds(10, 10, 10, 10);
this.add(ch, null);
DefaultTableModel tmodel = new DefaultTableModel(3, 1);
tmodel.setValueAt("0 0 1",0,0);
tmodel.setValueAt("1 0 1",1,0);
tmodel.setValueAt("2 0 1",2,0);
JTable custLayersTable = new JTable(tmodel);
custLayersTable.getColumnModel().getColumn(0).
setCellEditor(new ComboEditor());
custLayersTable.setBounds(new Rectangle(40, 40, 280, 145));
custLayersTable.setSurrendersFocusOnKeystroke(true);
this.add(custLayersTable, null);
public static void main(String[] args)
Frame1 a = new Frame1();
a.setVisible(true);
final class ComboEditor extends AbstractCellEditor
implements TableCellEditor
public Component getTableCellEditorComponent(JTable table,
Object value,
boolean isSelected,
int row,
int column)
Vector<String> layerValSet = new Vector<String>();
for(int i=0; i<3; i++)
layerValSet.add(row+" "+column+" "+i);
mComboModel = new DefaultComboBoxModel(layerValSet);
mComboModel.setSelectedItem(value);
mEditorComp = new JComboBox(mComboModel);
return mEditorComp;
public Object getCellEditorValue()
return mEditorComp.getSelectedItem();
private DefaultComboBoxModel mComboModel;
private JComboBox mEditorComp;
}

Thanks a lot for your reply.
Since the textField is in a different class i could not use the transferFocus API directly. I tried the following code in the keyreleased event of Combo Box but it was not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent(
e.getComponent().getParent());
I also tried the following code in stopCellEditing and is not working.
KeyboardFocusManager.getCurrentKeyboardFocusManager().focusNextComponent();
Is there any other way to achieve this?

Deleted Items Stay in Edit mode?

When Adding Items to a portal, for instance an Image... and then I want to delete that image... I can delete it so the image no longer shows on the finished page, but the Item still shows in the Edit mode. How do I delete the Item so it no longer shows in Item mode

Assuming that you are using 10g: 
Yes, you can disable this feature. Click on Properties of the Page Group that you want to disable this feature. Go to the third tab Items. 
On this tab you will see 2 options : 
Retain Deleted Items 
Display Unpublished, Expired, and Deleted Items In Edit Mode 
Either enable or disable based on your preferences.

Edit Mode to Scene on Timeline

Similar Messages

Maybe you are looking for